Contempt found the default profile with a functional version of prefs.js folder. Prefs.js is damaged or unreadable how to replace by a good version?

Similar Questions

• modify the DEFAULT PROFILE on primary - change or automatic standby?

  Hi all
  
  Changes to the DEFAULT PROFILE on primary automatically fits the wait at the CCR?
  
  If the watch is read-only, then changes can never be made manually, so how I update the day before?
  
  Thanks in advance
  Steve
  
  Running Oracle RAC 11.2.2
  
  Ive changed the DEFAULT profile with success on the head node
  
  I then try to update the sleep using the same ALTAR and see the following:
  
  
  [oracle@GAATL-OTA-ODC bin] $ sqlplus / as sysdba
  
  
  
  SQL * more: Production of liberation 11.2.0.2.0 Saturday, May 21, 10:33:53 2011
  
  
  
  Copyright (c) 1982, 2010, Oracle. All rights reserved.
  
  
  
  
  
  Connected to:
  
  Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production
  
  With partitioning, Real Application Clusters, Automatic Storage Management, OLAP,.
  
  Options of Data Mining and Real Application Testing
  
  
  
  SQL > connect / as sysdba
  
  Connected.
  
  SQL > ALTER LIMIT DEFAULT PROFILE
  
  2 FAILED_LOGIN_ATTEMPTS UNLIMITED
  
  3 PASSWORD_LIFE_TIME UNLIMITED;
  
  CHANGE THE DEFAULT LIMIT PROFILE
  
  *
  
  ERROR on line 1:
  
  ORA-00604: an error has occurred at the SQL level 1 recursive
  
  ORA-16000: database opened for read-only access

  Hello

  everything you do in the primary, which writes information Redologs (what changing profile done) will be applied on the day before.

  So if you change the profile on the primary changes will also be on standby.

  He's a little more complicated to have different profiles for the primary and standby.

  Concerning
  Sebastian

• Windows 7 crashes my profile, leaving me with the "default" profile. Even if I wipe my laptop and re-install.

  Hello

  First: I have two identical laptops purchased from Dell with the same hardware configuration - both delivered with Vista. I upgraded to W7 as soon as possible, and since then, one of the laptops does not load my profile several times.

  I use to work as a system administrator, so of course, at the beginning, I didn't much attention to the mistake thinking it was just an incident. I formatted the computer, reinstall W7 and, of course, the error occurred again - constantly even if I wiped it and re-install.

  What is happening is that the computer starts, I connect Windows crashes for the moment very loong and then all of a sudden he says "preparing your desktop". When that happens I know its load under the 'default user profile', it's 'welcome '.

  This error occurs about two to three times in about 7 days. But not all the time - it's like periods. I usually get through this by organizing the closure for 4 seconds, restart, and then, if I'm lucky, gets through my office.

  A few times that I had no chance - restart of 6 times in a row without luck somehow shows that the profile files are really damaged, and then I created a new migration profile all my old files. This process takes time - not simply copy my files but also the settings of my program.

  Last week, I deleted my user just to create a new one-8 it recharges without success.

  I looked in eventvwr.msc and found that everything begins with six fouls in a row. I don't really know what do - the error log says error but it seems not very well describe it.

  It goes like:

  1 error:

  Windows could not load the registry. This problem is often caused by insufficient security rights or insufficient memory.

  DETAIL - the process cannot access the file because it is being used by another process.
  for C:\Users\[my account] \ntuser.dat

  EVENT ID: 1508
  TIMESTAMP: 2010-12-30 10:03:46

  2nd error:

  Windows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a damaged local profile.

  DETAIL - the process cannot access the file because it is being used by another process.
  EVENTID: 1503
  TIMESTAMP: 2010-12-30 10:03:46

  3rd error:

  Windows has backed up this user's profile. Windows tries to use the backup profile the next time this user connects automatically.
  EVENTID: 1515
  TIMESTAMP: 2010-12-30 10:03:46

  error 4:

  Windows cannot find the local profile and connects you with a temporary profile. Changes to this profile will be lost when you log out.
  EVENT ID: 1511
  TIMESTAMP: 2010-12-30 10:03:46

  error 5 (a warning):

  Windows cannot copy file C:\Users\Default\NTUSER. DAT to the C:\Users\TEMP location. [Name]. 000\NTUSER. DAT my PC. This error can be caused by network problems or insufficient security rights.

  DETAIL - the process cannot access the file because it is being used by another process.
  EVENT ID: 1509
  TIMESTAMP: 10:03:47

  error 6:

  Windows cannot load the user's profile, but you have logged on with the default profile for the system.

  RETAIL - only part of a query ReadProcessMemory or WriteProcessMemory was completed.
  EVENTID: 1505
  TIMESTAMP: 2010-12-30 10:03:48

  I don't know what it is. I can only say that reinstall W7 does not help. And lately, after creating the new profile, W7 began to start the default new desktop computer.

  So my question is: can I fix? If its not repairable can at least save files like ntuser.dat to crush the ntuser.dat file damaged W7 start sleeping?

  On the comp: 3 GB RAM, Core Duo2. The computer is used only for navigation on the internet, written for my studies and other reports not _ none of the weird stuff and no games at all.

  p

  Software properly written (as opposed to malware, viruses, and poorly written stuff) has similarly on day 1 after installation on 30 days. So you can go ahead with your driver and software installation as fast as you want, as long as you create a new file image at strategic points and keep notes dates when you installed this component.

  Given your experience, you will need to proceed cautiously with the automatic updates. First disable them, and then put the installation in Manual Mode so that you can install in small batches, again take notes.

  If you use Acronis image to create images, then you will need only half of space compared to the native tool. And if divide you your drive and put your personal files on the D: drive then you will not lose them during a restoration of the image.

  Be sure to keep your Windows Firewall active at all times and use a router. Make an Internet connection without a router (which is a hardware firewall) request in trouble. If you use a wireless network, make sure you use a WEP or WPA or MAC address screening encoding.

• 'Environment of the user' Windows cannot load the user's profile, but you have logged on with the default profile for the system.

  Original title: the user environment

  After starting windows, on the Welcome screen, this message always comes.
  "User environment.
  Windows cannot load the user's profile, but you have logged on with the default profile for the system. DETAIL: Not enough memory is available to process this command.
  And all my files that I save before you shut down or restart my pc all the my sample files on the desktop, my documents disappear...

  Thanks... :)

  This is typical of a corrupted profile.  To recover, perform the following steps:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  Almost always, corrupt profiles are accompanied by damaged drive.  During recovery, run a disk check with the /r or /f on your computer option.

  "How to perform disk error in Windows XP check"
    <>http://support.Microsoft.com/kb/315265 >

  HTH,
  JW

• Change the default profile for networks not identified in the register.

  Hi, I recently installed a copy of Windows 7 Home Premium. Recently, I tried to share files on a network computer to computer without router. I ran into problems with this, however, because Windows will just recognized here a network not identified, set its profile to the public and turn off sharing. I am aware that the default profile is editable through the local security policy editor, but being on the House, I am unable to access it, so my question is this:

  Is there a way to change settings of network profile for networks unidentified somehow outside the local security policy editor? (via the registry)?

  Hi Konaa,

  1. Click Start, type Regedit

  2. find hklm:\SYSTEM\CurrentControlSet\Control\Class\ {4D36E972-E325-11CE-BFC1-08002BE10318}

  3. find your network card adapter and create a dword value named "* NdisDeviceType" and change the value between 0 and 1 and enable/disable network cards.

  You can also try this:

  1. the Registry Editor open, if you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. Locate and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\ {GUID}

  This registry path, click the (GUID) subkey that corresponds to the card network that is connected to the network.

  3. on the Edit menu, point to new, and then click DWORD (32-bit) value.

  4. in the new area #1, type DhcpConnEnableBcastFlagToggle and press ENTER.

  DhcpConnEnableBcastFlagToggle click 5.right, and then click on edit.

  6. in the value data box, type 1 and then click OK.

  7. close the registry editor.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  How to back up and restore the registry in Windows XP: http://support.microsoft.com/kb/322756

  Back up the registry: http://windows.microsoft.com/en-us/windows7/Back-up-the-registry

  =================

  Find the Hello service by typing "services.msc"... START-> "search box" and Enter.

  This service is installed by Apple, if you have iTunes or adobe applications.

  ===========

  Thank you, and in what concerns:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• How to customize the default profile Win7

  Hello

  I was hoping someone could help me; I'm trying to customize my Windows 7 default profile.  The way I used to do in the past with WinXP was to:

  1. Create a local user account that have no administrator rights
  2. With this local user logon and tweak the desktop and applications like I wanted
  3. Reboot and a map than the machines of local disk to another computer
  4. Make a copy of the original default profile and name it "Profile by default (Original)"
  5. Copy the contents of the local user profile account I logged in earlier and paste it into the default user profile

  It worked like a charm and all connected users subsequently received the twisted user profile that I created.  With Windows 7, I use a lot of permission issues (even if I am logged in as a domain administrator or a Local administrator).  Also, I have granted local administrator rights 'Owner' on the default profile and it is still impossible to copy.  Unfortunately, I do not have a specific error.

  Any help would be greatly appreciated that makes me crazy.  It's something that I used to be able to do so simply with XP.

  Thanks in advance,

  Rob

  Hi Rob,

  Here is a good KB article to help you get started. Let us know if you have any questions:

  'How to customize default user profiles in Windows 7 and Windows Server 2008 R2'

  http://support.Microsoft.com/kb/973289

  Steve <> Microsoft Partner

• Win7 always tries to connect by using the default profile for the Native WIFI

  Win7 always tries to connect by using the default profile for the Native WIFI
  I defined a new WIFI profile for my home WIFI network. I use a USB of NETGEAR WNA1100 adapter. The profile is configured to connect automatically. I also moved over the default profile for the Native WIFI. Win7 always tries to connect to the default Native WIFI profile and not the profile that I created. Also, when I restart Win7, the default profile for the native WIFI moves to the top of the Profiles list. Also, when I try to change the default Native WIFI profile to use security WPA2 - PSK (AES) instead of WEP, it allows me to make changes, but he comes back to WEP after it treats changes and attempts to connect to the network. How can I fix so that Win7 will use my profile to connect to my home WIFI network and not the Native WIFI as the default profile. Win7 still connect using the default profile of NativeWIFI despite installing a different profile in Control Panel 'Wireless Networks '. I know that I can edit this profile by default, but anyone know how tell Win7 to use a different profile than the default? I tried to change the positions of the profile so that I want to use is facing up, but no, still uses the default. If I try to remove it, it comes back.
  After removing the two profiles and adding the profile for my home network, Win7 automatically added the default profile for the return NativeWIFI. My profile is configured to automatically connect to the network using WPA2 - PSK (AES) security and the default profile for the NativeWIFI (use WEP security) is the Win7 Setup to manually connect. Also, Win7 puts the default profile for the NativeWIFI above my profile. Also, when I delete the profile by default the NativeWIFI, Win7 it always puts back and he goes over my profile. This is starting to resemble the Win7 manage wireless mechanism for allowing users to add and prioritize the profiles of school boards does not work. Here's another thing that happens: when I try to change the security for the profile default of NativeWIFI to WPA2 - PSK (AES) of WEP, Win7 allows me to make changes, but it is up to the WEP after it processes the changes and tries to connect to the network. This seems too much for me, it's a problem with Win7. If I could do this job, so I need not to set up a second profile.
  The adapter I use a NETGEAR WNA1100 works correctly and I use it without any problem. I have is with Win7 and the interface to 'manage wireless networks '. It will not honor the fact that the WIFI profile that I created for my home network must be connected to automatically I installed. He always wants to connect to the default profile NativeWIFI even if I set up my home network profile to connect automatically. I can do a manual connection for my home network without problem. It seems to me that it is a question of Win7.
  Kind regards
  QRP

  Thank you very much - Netgear seems to have finally accepted as the default network!  If all goes well it will stay like this

  MAS

• Why my computer is passed to the default profile?

  OK... my computer froze and I stopped him on the surge protector and when I turned on my computer and logged my admin account is the default profile. (I have 2 users) I talked to a friend who is a tech support person and has been following the instructions was a system restore but it did not help the night before that my mother had to do a system restore and it worked, but now I can't get any of the programs I use all I have a program that I use and it deleted it...

  Sometimes, your profile may get damaged by things like not to do a clean shutdown. Maybe what you feel when you say your computer has frozen. Programs could not close properly and always have a handle open to the registry so, it corrupted your profile.

  You can use the link below to fix a corrupted for Windows 7 http://windows.microsoft.com/en-US/Windows7/Fix-a-corrupted-user-profile user profile

  You may need to reinstall the programs that may have been corrupted as you using the original media.

  This will help you solve your problem. I suggest you make a full backup of your system in case you are still having this kind of problem.

  Thank you

  Marilyn

• Cannot ping the default gateway with Centrino Advanced-N 6235 on XPS 12 but CAN connect to the Internet

  I have a XPS 12 with an Intel Centrino Advanced-N 6235 wireless card.  I can't ping the default gateway with the wireless card.  When I use a USB network adapter, I can ping the default gateway for the wired connection.  I can connect to the Internet and the internal network with the wireless card and can ping other computers on the network.  I am trying to run a program to connect wireless to a projector.  I have two different programs for the two different projectors.  I can connect by cable but not wireless.  I think that the problem is anything that does not make me a ping of the default gateway or something on the wireless card.  I have a 10 latitude with a Broadcom wireless card that is connected to the same access point and can ping the default gateway and can connect wirelessly to two projectors.  They all have two windows 8 Pro.

  I downloaded the new drivers from Dell, uninstalled, reinstalled, tried to update Windows install the drivers, all with no success. Any ideas?

  The solution of the problem by chance.  I was connected to the computer with a different network than what has been used to authenticate user account on the wireless.  When I switched the user account for the user account that was logged on to the computer was the same who authenticate to the wireless, it worked.  Go figure!

• I need to change the default 'open with' Bridge of photoshop to photoshop CC 2015.  How do I do that?

  I need to change the default 'open with' Bridge of photoshop to photoshop CC 2015.  How do I do that?

  Hi karen,.

  It can get a bit tangled. Bridge delay normally to some think the Finder is the default, and every OS has its own way for you to tell the OS what you say should be the default value. On Mac, it's in the file information dialog box. I think that Windows called something like properties. You can change an extension to open all files with an application in your operating system first, restart Bridge and see if she pays tribute to this choice by double clicking on a file and observing that it opens the right version of PS. normally, it will be. (By default) must also appear after this choice in the list open with contextual (right click on the file you want to open, select open with and find the name of the application in the list).

  If this does not work, you will need to manually choose your file association for the extension of the list next to him in the Bridge preferences > File Associations. Which is normally necessary only when you want to override the default choice of your OS System. For example, maybe you want to bridge to open in PS JPEG files when you double-click it in Bridge, but if you double-click on a file in the Finder/Explorer JPEG, you want to open with Viewer of this system. It will not say it is (by default) in the pop-up list more, but bridge will honor your file associated with the choice of your system.

• What is the default idle in the default profile?

  Hello
  
  Any1 can you please tell me what is the default value of idle for a session if a user has been assigned a default profile in Oracle 10 g?
  
  Thanks in advance

  832812 wrote:

  SQL> Select resource_name,resource_type,limit from dba_profiles where profile = 'DSS_UNLIMITED_PROFILE';
  
  RESOURCE_NAME                    RESOURCE LIMIT
  -------------------------------- -------- ----------------------------------------
  IDLE_TIME                        KERNEL   DEFAULT
  

  So the idle value is default. What is value, how do you know?

  Hello

  The idle value for profile DSS_UNLIMITED_PROFILE is DEFAULT, it means that the value must be the 'Default' profile search

  Select resource_name, limit of dba_profiles where the profile = 'DEFAULT' and resource_name = "idle";

  See you soon

• Why firefox can not open with the default profile. It should be renamed?

  trying to install "malwarebytes" for extra protection, the Norton toolbar on firefox has been reduced in size by losing my option "Vault". This prompted reinstalling on securities Notion which then prevented the opening of firefox. Internet Explore works well but I use firefox for years so why change. Firefox won't open (even after being uninstalled and downloaded and reinstalled. The message 'your firefox profile cannot be loaded, etc.' following the instructions of your forum, I locate a profile with the word 'profile' embedded file. The word "profile" in the flow path is preceded by a weird name (such as a foreign name). Path =
  'C:\Users\Owner\AppData\Roaming\Mozilla\Firefox\Profiles\bzjajhor.default-1419035389504 '. This file needs to be renamed and can they?

  Please help me to go back to firefox. Thank you

  Do not rename a profile folder.
  It seems that there is a problem with the profiles.ini.

  See:

  • https://support.Mozilla.org/KB/how-run-Firefox-when-your-profile-missing-or-inacc

  This is usually caused by a problem with the file profiles.ini and the profile marked as the default value = 1 in this file is no longer present on the hard drive.

  • Windows: %AppData%\Mozilla\Firefox\
    C:\Users\ < user > < profile > \AppData\Roaming\Mozilla\Firefox\Profiles\.
  • Linux: ~/.mozilla/firefox/
  • Mac: ~/Library/Application Support/Firefox /.

  You can use one of them to make Firefox/reuse to create a new default profile:

  • Remove the profiles.ini file to force Firefox to create a new default profile
  • Use the Profile Manager to create a new profile
    Use "Choose a folder" when you create a new profile to select the location of a lost profile and recover this profile
  • http://KB.mozillazine.org/Profile_Manager
  • https://support.Mozilla.org/KB/managing+profiles
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• Large number of files in the directory profile with at sign in name

  Hello
  I noticed that my wife s v35 Firefox running Windows 8.1 32-bit has a large number of files such as:

  cert8@2014-03-25T19;02;18.DB
  Content-prefs@2014-01-30T21;28;58.SQLite
  Cookies@2014-01-08T18;12;29.SQLite
  HealthReport@2015-01-20T06;44;46.sqlite
  Permissions@2015-01-19T10;26;30.SQLite
  webappsstore@2015-01-20T06;44;48.SQLite

  Some files are entirely new.
  The original files get backed up somehow, but I can't figure out how. My PC does not contain such files.

  Thank you

  I'm sorry, this has nothing to do with Firefox. I was watching the backup directory created by Memeo autobackup. The original profile directory is OK.
  Sorry once again.

• Licensing issue? I need to replace the default motherboard with a 'Detail' education Vista Ultimate Upgrade on top of XP "OEM." Can legitimately transfer my license everywhere and how?

  I am currently a computer on which I already installed XP OEM and upgraded to the edition upgrade Vista Ultimate retailers through the ultimate steal Microsoft.

  [Reminder]

  The problem I have is that I've recently updated my graphics card to a card of Nvidia 7300GS card Nvidia GT240 on which my motherboard was properly assessed. However, due to some unfortunate circumstances (I dunno if it's associated graphics or an electrical surge problem, I suspect the latter as the card is fine) my PCI Express slot is fried! This resulted in the motherboard being unable to start any card in the PCI Express slot and gives a series of BIOS beep error codes. I even dug my old graphics (7300GS) and he was still unable to boot. Accordingly, I need to replace the motherboard for the PCI Express slot works if I use a graphics card.

  [Problem]

  Since the license Vista Retail Upgrade that I use currently is the edition of 'detail', can I simply change my motherboard everything and turn it back on, or is it more complex because it is installed on the high XP OEM that is bound to the default motherboard? What are my options?

  I have to buy another XP OEM license and reinstall everything from scratch? What happens if I didn't reinstall and just changed the motherboard and drivers updated my current installation? Is - is this legitimate?

  As I understand it, the Windows for OEM license allows a person replace a motherboard of 'default' (GA-M55plus-S3G in my case) for a replacement under certain conditions, mainly as for everything. Am I entitled to it? If so, what motherboard would be I can replace by although it is considered an upgrade? I have in mind an ASUS M4A78L-M as it is cheap and comes with connectors female jack audio 8 channels on the backplate was on my old motherboard.

  My main confusion is to know what license applies to me because of the upgrade process, retail of Vista or XP OEM? Upgrades medium I improve my driver's license?

  I would like to solve this problem without canceling my licenst but just don't know how?

  Thank you very much for any help or advice.

  Zemian.

  It is not Microsoft.

  These are public forums, hosted by Microsoft.

  You need to set the XP Reinstall 1 > and then perform the upgrade to Vista.

  We cannot tell you what motherboard you can replace it with.

  Here is the Vista Forums.

  You will have no problem using the Vista Upgrade retail > solve your XP problem 1 in the Forums of XP:

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• Cannot use Jasc Paint Shop Pro as the default image with Windows 7 program

  I try to use Jasc Paint Shop Pro with Windows 7. I can't use it as the default image program. I give me and error message when I try to open an image. "There was a problem sending the command to the program.
  This is a new HP Pavilion model S520y

  What version you trying to run? According to the website, the X 3 version is compatible Windows 7...

  http://www.Corel.com/servlet/satellite/us/en/product/1184951547051#TabView= Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/