content of an export file using the datapump

Similar Questions

• Need help with loading BSO cube with several data export files using the Regional service

  Hello
  
  We have BSO cubes that are huge and when I expoted data in files, it generated ABC.txt, ABC_1.txt, ABC_2.txt, like this.
  
  How to load this data in the Cube that sits on the other environments? We use Essbase 9.3.1.
  
  I can load the individual files using EAS data loading? If so, ABC_2.txt then ABC_1.txt and finally an ABC.txt would be the loading sequence back?
  
  Please suggest.

  As Essbase is written this block by block, each block will have its complete info if it is done as a single export or parallel export. You can easily prove this (and I have) If you export a database and load only files 2 or 3, it loads without error. don't forget that you load a file rules, the load fails when the first error. There is no error found, so a value of a complete block of information must be present. Also open export (large files can be opened with wordpad) and you will see a complete info for block exery

• Creation Waveform TDMS file using the functions DDC_ in C 6.0?

  I'm trying to implement an export written in C 6.0. I can make the TDMS files using the DDC_ controls without any problem. But I can't understand how waveform TDMS files. I thought that if I added properties wf_ I should be able to define the waveform = Yes. But it seems to be more complicated than that.

  Here's what I work until now... (with the exception of the error handling to make it easier to see)

  DDC_CreateFile (sDestFileName, "TDMS", gszinfoline1, gszinfoline2, gszinfoline3, gszinfoline4, & hOutputFile);

  DDC_AddChannelGroup (hOutputFile, szGROUP_NAME, szGROUP_DESC, & hgroup)

  DDC_CreateChannelGroupPropertyTimestampComponents (hgroup,
  szCHANNEL_NAME,
  year (unsigned int),
  months (unsigned int).
  days (unsigned int).
  hours (unsigned int).
  minutes (unsigned int).
  wholeseconds (unsigned int),
  (double) fractionseconds);

  DDC_AddChannel (hgroup, DDC_Double, szCHANNEL_NAME, szCHANNEL_DESC, szCHANNEL_UNITS, & lphchannel);

  DDC_CreateChannelProperty (lphchannel, "wf_increment", DDC_Double, dInterval);
  DDC_CreateChannelProperty (lphchannel, 'wf_xname', DDC_String, 'Time');
  DDC_CreateChannelProperty (lphchannel, "wf_xunit_string", DDC_String, "s");
  DDC_CreateChannelProperty (lphchannel, "wf_start_offset", DDC_Double, 0,0);

  Any suggestions? (Details of this aid are intended for LV or completely absent)

  Thank you very much

  Don

  Hi Don,

  Thanks for the additional information.  After doing research a bit more, it seems that there are 3 required properties so that the property of waveform to be set to yes.  These are wf_start_offset, wf_increment and wf_samples.  If you add in a call such as the following, this should solve the problem:

  DDC_CreateChannelProperty (lphchannel, "wf_samples", DDC_Int32, 5);

  Just replace with the length of your table 5.

  Kind regards

• How to open the pdf file using the LabVIEW program

  I want to open the pdf file using the system exe, but this isn't the case. Can you help me?

  Thanks for your help.

• Transfer files using the Personal Communicator

  All,

  Can I transfer files using the cell phone?

  Someone at - it a user guide and Administrator's guide on how to configure and use this installation?

  Thank you

  Lucian Medeiros

  No, you can't. You would need for this jabber.

  Q.	Cisco Unified Personal Communicator and Cisco Jabber for Windows can interact?

  A.	Yes, these two clients can interact.   Note Although features that are not part of the Cisco Unified Personal Communicator client. like the screenshot, video, desktop sharing and file transfer; are not interoperable between two clients.

  http://www.Cisco.com/en/us/partner/docs/voice_ip_comm/Jabber/Windows/9_0_1/b_jabber_win_faq_chapter_01.html

  HTH

  Java

  If it helps, please note

  www.Cisco.com/go/pdihelpdesk

• Generate class files using the WSDL url and wsimport

  I am trying to create a java application that hits the service exposed by hub.

  To create the application in java, I'm generating class files using the WSDL that is created and exposed by the hub.

  Executed steps:

  1 created an application in OPA.

  2. deployed on the hub (usinf deploy option of snapshot on Policy Modeling)

  3. in the deployment tab, I see the request and get the url of the wsdl by clicking on it.

  I try on this wsdl wsimport command. But it gives me following error messages.

  ---------------------------------------------------------------------------------------------------

  C:\***\AllFiles > wsimport http://localhost:7001/hub/determinations-Server/assess/SOAP/generic/12.2/AttemptOne?WSDL

  the analysis of WSDL...

  [ERROR] invalid WSDL http://localhost:7001/hub/determinations-Server/assess/SOAP/generic/12.2/AttemptOne?WSDL , expected {http://schemas.xmlsoap.org/wsdl/} html (line 2) data definitions

  Cannot read the WSDL document: ( http://localhost:7001/Hub/determinations-Server/assess/SOAP/Generic/12.2/AttemptOne?WSDL , because 1) did not find the document. (/ 2) the document could not be read. (3) the element the document root is not < wsdl:definitions >.

  [ERROR] WSDL:service is not found in the WSDL (s) provided:

  At least a WSDL with definition of at least one service must be provided.

  Unable to parse the WSDL file.

  ---------------------------------------------------------------------------------------------------

  If I store the wsdl file in a file on my local computer, and then run wsimport, it generates the classes very well.

  Can someone provide me with a way that I can generate the classes using the wsdl url and not the local file?

  Also, do I need to create a connection in the Connections tab on the hub?

  Thanks in advance.

  -Alain

  Looks like you could run in the user authentication when wsimport runs against the WSDL. Instead of the WSDL, its reception, the login page.

  The best way to work around this problem is perhaps what you do already - to obtain the wsdl and save them in a file.

  Another solution is to disable the restriction of connection to the Web Service API. You can do this in the menu on the users page (admin role can turn on and off.

  You can switch between a user and a password with the call of the WSDL file, but I don't know if its possible to do with wsimport

  See you soon

  Frank

• My creative cloud cannot happen on the adobe servers and when I tried to repair the host file using the creative cloud cleaning tool, it displays Error occurred while setting entries HF: 5

  My creative cloud cannot happen on the adobe servers and when I tried to repair the host file using the creative cloud cleaning tool, it displays Error occurred while setting entries HF: 5

  Please let us know your operating system.

  Concerning

  Megha Rawat

• Can I add watermarks to PDF files using the PDF package?

  Can I add watermarks to PDF files using the PDF package?

  Hi Susannah,

  Adobe PDF Pack does not allow to edit a PDF file. To do this, you would need Acrobat. We invite you to try Acrobat free for 30 days: see http://www.adobe.com/products/acrobat.html for more information.

  This help document describes how to watermark a PDF in Acrobat: add watermarks to PDF

  Best,

  Sara

• How to exclude table as % of AUDIT using the Datapump API

  Hello
  I try to use the datapump API to import the table into a database link, excluding the table with a name like % AUDIT. I have it working all except running the table. I use Oracle 11.1.0.6.

  It works in my application
  in DB R11.2
  in job_mode = "TABLE".

  () dbms_datapump.metadata_filter
  handle-online job_handle,
  name-online "NAME_EXPR."
  value => "NOT IN ("TABLENAME_1","TABLENAME_2","TABLE_NAME_3")"
  );

  Try this works for you

  () dbms_datapump.metadata_filter
  handle-online job_handle,
  name-online "NAME_EXPR."
  value-online "LOVE NOT"AUDIT %""
  );

  Published by: astramare on July 7, 2011 14:57

• Loading multiple files using the same interface in ODI

  Hi all
  
  We load multiple files using the same interface and get the error "java.sql.SQLException: ORA-00942: table or view does not exist" while inserting record in the staging table. It looks like the same temporary table is used when loading multiple files and the error. Grateful if someone offers a solution to avoid this error.
  We use the following KMS:
  
  (1) LKM SQL file
  (2) IKM Oracle SQL COMMAND append.
  
  Receive a quick response.
  
  Thank you
  RP

  Hello

  See this http://odiexperts.com/interface-parallel-execution-a-new-solution

  Thank you
  Fati

• Is it possible to create a new file using the XML via java Script?

  Hello everyone,

  Is it possible to create a new file using the XML via java Script

  • I have xml information that need to use for file name, size.
  • Based on xml file we can create a new file in InDesign with java script?
  • Kindly help me if anyone has an idea about this.

  I use InDesign CS4 on windows 7

  Sample file is attached below.

  Kind regards

  Siva

  <UpdateAd>
  <AdId>3403699</AdId>
  <Width type="mm">91,79</Width>
  <Height type="mm">80,00</Height>
  <ProductionCategory>4</ProductionCategory>
  <BookedCCIColors>sw</BookedCCIColors>
  <WorkFlowType>PDF</WorkFlowType>
  <CustomerNumber>652224</CustomerNumber>
  <CustName1>Erich Prang</CustName1>
  <Description/>
  <Description2>R</Description2>
  <UpdateIns>
  <Titel>RHZ</Titel>
  <Publication>B2</Publication>
  <RunDate>26-07-2011</RunDate>
  <Zone>H30</Zone>
  <KDDATEN>nein</KDDATEN>
  </UpdateIns>
  <WorkflowStep>IR</WorkflowStep>
  <Proof>No</Proof>
  </UpdateAd>
  
  

  

  Try this:

  var f =File.openDialog ();
  f.open('r');
  var xml = new XML(f.read());
  f.close();
  
  var myDocument = app.documents.add();
  myDocument.documentPreferences.pageHeight = xml..Height+"mm";
  myDocument.documentPreferences.pageWidth = xml..Width+"mm";
  var rect = myDocument.pages[0].rectangles,add();
  rect.geometricBounds = myDocument.pages[0].bounds;
  rect.strokeAlignment = StrokeAlignment.INSIDE_ALIGNMENT;
  rect.strokeColor = myDocument.swatches.item("Black");
  rect.strokeWeight = 1;
  myDocument.save(File(f.path + "/" + xml..AdId + ".indd"))
  

  Substances

• Opening files using the InCopy layout

  How configure you a default to open all files using the InCopy layout? (CS5)

  Without any document open, go to the 'View' menu and select the Mode of disposal. On all of the files will be open in the corresponding mode.

• Export data from the database to excel file using the procedure

  Hello
  
  I need to export data from database to oracle 10 g for the excel file, I try this code:
  
  First, I create directory to the user sys and give permition to user that I'm working on it

  create or replace directory PALPROV_REPORTS as 'c:\temp';
  
  grant read, write on directory PALPROV_REPORTS to user12 ;

  then I run this code

  declare
      output utl_file.file_type;
  begin
      output := utl_file.fopen( 'user12' , 'emp1.slk', 'w',32000 );
      utl_file.put_line(output, 'line one: some text');
      utl_file.fclose( output );
  end;

  the problem appears as
  ORA-29280: invalid path ORA-06512: at "SYS." UTL_FILE", line 29 ORA-06512: at"SYS." UTL_FILE", line 448 ORA-06512: at line 4
  
  Notice that I use the operating system windows as a client and a linux as a server database

  The file will be written to the database server or your GNU / linux and I'm quite sure, there is no folder named "c:\temp" on linux. It will probably be ' / tmp' on a unix server.

  And open the file, you must give the name logic directory 'PALPROV_REPORTS' it instead of the user name "utilisateur12".

• Export the dump file using the Scheduler

  HelloW everyone.
  
  It's Tic Tac Toe, I'm looking for help, I created a script to export dump files, but I had a problem
  When exports began because of the existing name his exporting is not the file I want is anyway
  to change the export name daily?
  
  Tic Tac Toe

  Check this box
  Add timestamp to filename exp
  http://www.idevelopment.info/data/Oracle/DBA_scripts/WINDOWS_Shell_Scripts/dpump_backup_online_full.bat

  -André

• Change to error in the export file in the order of the elements in the array of construction

  Hello world

  Some time ago I wrote a vi file that performs the following operations:

  As a first step, it initializes a camera and chooses a region of interest (ROI). Data on the return on investment will be eliminated.

  Then he raster scan engine stage in x and y axis, in bidirectional mode (meaning that x alternating between sweeping left to right and from right to left as is inreased).

  For each point of the analysis, the spectrum is collected, which is then integrated into lambda to give an idea of the total intensity.

  Then the intensity is plotted, as well as the spectrum at each point.

  The final results are exported to a text file.

  The problem:

  If I reverse the order of the son in the 'build' table prior to exporting the file, place the Total Count (intensity) wire instead of thread of the spectrum, the export file fails. By "fails", I mean it's the .txt file contains characters that resemble Chinese!

  Why is this?

  I enclose my .vi, as well as two screenshots that show the problem.

  Hooovahh wrote:

  Such a small change, should not have such a strange result.  I advise to use some debugging tools like highlight the enforcement tools, probe and breakpoint to see what data is when it runs.

  http://www.NI.com/gettingstarted/labviewbasics/debug.htm

  The Source is in 2011.  I see an opportunity and a potential work around certain things to try.

  1. take the following steps
  
  
  • Select each stacked sequence right click and "convert flat sequence.
  
  
  • Select each flat sequence and delete the sequence

  It could simply fix it by itself you want to turn auto-growth on surrounding structures

  2 allows to observe the data in the table build

  • For all wires that are sgl heading construction table insert a dbl and a copy of Allways

  What I suspect LabVIEW is incorrectly re-use of buffers for the inhabitants of sequence