Content transfer to the old drive again using disk utility?

Similar Questions

• Change hard drive - how do I reinstall Windows copy on the old drive?

  I intend to change my old hard drive to the laptop with a new one. Windows Vista comes with the old drive, how can I move to the new? Copy + paste does not work completely. Thank you!

  Hello

  There are different ways to do

  hard drive manufacturers will normally provide the cloning software to move your operating system installed from the old to the new hard disk

  Search for information on this subject on their Web site

  If you have vista business or ultimate, you can use the builtin vista complete PC Backup to move

  read the information below

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  or if you have vista home version you'll need 3rd party software

  link below is an example of this:

  http://www.Acronis.com/homecomputing/products/TrueImage/index.html

  also to put your machine how you bought:

  1. that vista is preinstalled, you should have a recovery on your old hard drive partition

  You can recovery disks to reinstall on your new hard drive

  ask the manufacturer of the machine how

  2. contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  3. or borrow a microsoft dvd vista

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  Save all data, because it will be lost, do the above

• How can I transfer on the D drive on drive C drive?

  I have a computer dell laptop Windows 7 that I bought in a shop big box several years ago.  It is not my main computer, so I guess that he neglected to get.  I was using it yesterday and received a message saying my disk space was dangerously low, and I took the recommended steps to fix the problem.  This did not help, then I looked at the properties on the disks on the computer.  Long story short, this PC has been partitioned with 2 drives, C: (operating system) and D:.  The c: drive has only 60 GB and is completely filled.  D: drive has 400 GB and is relatively empty.  How can I transfer on the D drive on drive C drive?

  Original title: problem laptop

  Using a third-party utility, it is free http://www.partition-tool.com/

  To ensure that your data is saved and you did the set recovery disk, as directed by Dell

• I just installed a new drive faster. How can I get windows live mail from the old drive to the new drive

  Where are the files stored WindowsLiveMail?  Under what article directory.  I have "tons" of e-mail messages stored on the old disk and need to move them to the new drive faster.  How can I do?

  The location of the store folder, which contains all the messages, calendars and the account settings, is configurable by the user. The default location is
  C:\Users\{user}\AppData\Local\Microsoft\Windows Live Mail

  If the installer of WLMail is a record storage in the default location, it normally acknowledge and take into use if. The only user that would be required should reinstate saved passwords. If this is to succeed, the old and new installations of WLMail normally must be exactly the same construction. The storage location must be in place in the default location on the new drive before installing WLMail. Also, the current user must be the owner of the record store to its new location.

  If the old drive is installed on the same computer as the new facility in WLMail, you can point the Import Wizard to import messages to the old folder of the store. They will find under storage folders into imported folders.

• After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help?

  After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help? (My disk utility shows that she in MAC OS extended (journaled) format.)

  It shows that it is Mac OS extended, not journaled. Click enable logging in the toolbar.

  The thing you read is if you format the drive using the RAID settings you have selected. You have to look at the bottom of the window where it shows the Format.

• Is it possible to partition the hard drive by using software like Partition Master, install XP and an earlier version of Office on the new partition?

  Partitioning of a Windows 7 computer

  On a laptop Windows 7 HP, it is possible to partition the hard drive by using software like Partition Master, install XP and an earlier version of Office on the new partition? I know I can run Win7 XP mode, but many prefer a base XP environment. Yes, I have new copies unregistered XP and Office 2003.

  TIA,

  Steve

  Besides Partition Master you can also use Windows 7 "Disk Managment" to shrink the partition of Windows 7, create a new partition of the space "unallocated", and then do a formatting NTFS "Full".

  Installing dual Boot with Windows 7 and XP
  (Read each method in this article and that fits your needs)
  http://www.SevenForums.com/tutorials/8057-dual-boot-installation-Windows-7-XP.html

  EasyBCD allows to appear more user-friendly boot menu:
  http://NeoSmart.NET/DL.php?id=1

  J W Stuart: http://www.pagestart.com

• How can I install Windows 7 onto the new drive while keeping Windows XP on the old drive?

  Wow for on 1 computer install 2 operating systems with 2 hd

  I have 2 hard drives; We have Windows XP and the new one is empty (empty) installed on a computer.  I would like to install Windows 7 on the new hard drive.  How can I install Windows 7 onto the new drive while keeping Windows XP on the old drive?

  Thank you

  Hello

  Sound pretty simple you just need to start from the disc and choose the 2nd hard drive during the installation of windows 7
  your xp will remain such what. every time that you start the system it will ask you to choose which operating system you need
  Start with.
  thanx.

• Error: "cannot find the path specified for the old driver X5XSEx_Pr135.

  Original title : can not find the path specified for the old driver X5XSEx_Pr135 is the message I get.  How can I solve this problem?  What is a legacy driver?

  Can you help me solve this puzzle?  I have no idea how to solve this problem!  Help

  Hello

  (1) when you get the error message?

  (2) program who worked on when you got the error message?

  The computer game to clean start State to check which program is associated with error.

  http://support.Microsoft.com/kb/929135

  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 of the above article.

• My computer won't allow me to access my files on my portable hard disk without error appear "you must format the E: drive before using it. How can I fix this please!

  My computer won't allow me to access my files on my portable hard disk without error appear "you must format the E: drive before using it. How can I fix this please!

  Try to scan your driver with anti-virus, also try to throw the disc looking for this driver and as you try to run the following tools:

  http://support.Microsoft.com/mats/system_maintenance_for_windows/

  http://support.Microsoft.com/mats/windows_file_and_folder_diag/

• How to release the old drive letters for the readers changed or deleted hard/dvd.

  I flashed the bios for my dvd player, now windows is assigning it a new drive letter. How the old drive letter available to be reassigned?
  Thanks for any help.

  Windows Vista 32-bit & 64-bit SP2

  Hello

  Start - type in the search box-> disk CONTROL the top management - right Click-RUN AS ADMIN

  Right-click on a drive

  Change, add, or remove a drive letter
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-add-or-remove-a-drive-letter

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• I'm reinstalling 11 items on the new hard drive on my machine. I got reg no product of the registry on the old drive but when try to install it says it's the wrong serial number. What I am doing wrong?

  I'm reinstalling 11 items on the new hard drive on my machine. I got reg no product of the registry on the old drive but when try to install it says it's the wrong serial number. What I am doing wrong?

  Hi Phill,

  Please see the links below.

  • Invalid serial number error
  • Error "serial number is not valid for this product". Creative Suite

  Hope this will help you.

  Kind regards

  Hervé Khare

• Cannot restore the files from hard drive damaged in disk utility

  Questions

  1. can I save my files/fix this problem without having to restore via disk utility?

  2. What am I doing wrong / I can do to restore correctly on an external hard drive via disk utility?

  Background

  Last week when I turned my MacBook Pro 2012 I got stuck on the gray login screen. The progress bar moves very, very slowly and when he finished my laptop spontaneously restarted and repeated the same thing over and over again. Here's what I tried to do so far:

  -Start in SafeMode: does not work

  -Extended Apple Diagnostics/Apple Hardware Test: test results: no problem found

  -Utility (recovery and valorisation of the Internet) disk: disk hard Mac (Apple HDD) and Recovery (partition) HD are not damaged, but the partition disk0s2 is (created after a failure; a year not logged - if it matters) and in 'check' and 'fix' the latter I get inconsistent error messages.

  Disk utility error messages

  Most often, I get this error:

  The volume disk0s2 was found damaged and must be repaired. Error: This disc needs to be repaired. Click on the ERD.

  Stopped disk utility check "disk0s2."

  Disk0s2 volume could not be repaired after 3 attempts.

  Error: Disk utility can't repair the disk. Save as many files as possible, reformat the drive and restore your files packed around the top.

  I also received this error message once:

  Wrong number of extended attributes (it should be 730585 instead of 730589)

  Wrong number of access control lists (there are 1364 instead of 1368)

  Save the files to external hard drive?

  Before that I didn't even used/accessed Time Machine.  I have a new HDD external, formatted for Mac. I created two partitions: backup and Time Machine (so I can start using it once I have find this current issue). When I try to restore disk0s2 external hard disk I get an error restore failed (252 or 254, I think).

  When you drive is damaged, it is extremely difficult to make progress.

  I recommend the lessee a spare drive in an external enclosure and install MacOS on it again. Then boot from that and you are back in business. You can use the full power of Mac OS AND additional utilities to recover your files.

  More 350 000 files on your damaged disc are Mac OS - and those that can be installed in replicas of prefect by a new installation on a new drive. You can't Brute force 'all' copy of a damaged disc. What you want back damaged drive is not Mac OS X files - you want YOUR files. They are stored in the Directory/users in a folder with your short user name. with additional utilities, you can simply copy this directory, or use a recovery as data rescue program to get individual files.

• Use disk utility to erase hard drive, erase everything, it

  I just use disk utility to erase the hard drive of Windows base.  It has 6,2 GB of space.  The erase process takes only a few seconds.

  I read that it could take hours.  I suspect that he does not erase the hard drive.    I have several old PC drives and want to use disk utility to erase.

  How would I know if it works?

  Rolland

  I would just use disk utility to put those (journaled) in Mac

  If nothing has been left in the delete process - the format will take care of it

• Recently installed iTunes needed to point to the old library on a disk hard separte and import my old iPhone backups

  I recently reinstalled my OS and iTunes on a new hard drive, my old iTunes program was stored on

  the drive that I removed. My iTunes music library has been memorized and is still located on an external hard drive that is still in

  use. How to point the new installation of iTunes on my music iTunes located on the external hard drive and also import

  My data backup iPhone, applications etc... the former replaced the hard disk that the iTunes program was stored initially on?

  Assuming that you have the entire library, not only the media folder, and then press and hold down the SHIFT key as you launch iTunes. Keep now until asked to choose or create a library. Click on choose and find the iTunes Library.itl file in your iTunes folder.

  As long as your iPhone works you can connect and save it like her now. If you have the old hard drive and try to migrate the older backup sets, these need to be copied in \Users\\AppData\Roaming\Apple Computer\MobileSync\Backup

  See make a library of portable split to the bottom. If your library has been split and you have the old drive so it should be possible to pull the library of him and put it on your outside.

  TT2

• Creating image using disk utility

  Hi - I am trying to create an image file of and CD Audo to later burn multiple copies (I own the rights on this CD).

  The process I use is to load the CD in the drive SuperDrive, open disk utility and select the disk in the sidebar (curiously, the drive itself is not there, just the disk). Can I go to file = > new Image == > Audio CD Image. Select a destination, Format: unalterable, encryption: no) and click Save.

  He done much work slowly disk reading and writing of the file (Audio CD.dmg). However, if I try to open the file when it has finished, it said "no mountable file system" and if I burn it to a CD - r disc resulting almost blown my speakers with the sound. To check, I tried with a commercial CD as well - same result.

  I'm doing something wrong here. He doesn't know he used to work in previous versions of the utility.

  System: Mac Pro early 2008 OS X Superdrive Pioneer (original Apple) El Capitan 10.11.5.

  Hello

  There is a little powerful 3rd party app called 'Burn '. Older applications, it's works well in El Capitan as well. If you decide to download and install, you will need to go to preferences > Security and privacy to allow him permission to run for the first time. After that, he will not ask you again. It is simple and easy. Create .iso and burn. Create and burn data/audio CDs and copy CDs as well. There are a few 3rd party applications which are worthy of Mac, and this one is. The name of it, is once again, 'Burn '.

  Bravo!