Context-sensitive help works does not in RoboEngineI publish WebHelp Pro content to a RoboEngine server on a Windows 2000 Server. Because it is a driver of this technology for us, I use a web server on port 8081, so my help is served from http://sps01:8081 /
It works very well, with research and everything else as a stand-alone web site, but the integration with our application (VIsual Studio .NET application) does not work with context sensitive help.
I created the map ID is. I know this works because when I publish the Microsoft HTML Help (CHM file) and the application works very well.
If I open the help page for the URL I used is:
http://sps01:8081/Robo/bin/Robo.dll?TPC=%2Frobo%2Fprojects%2Fkeystone%2Fgetting_started%2f getting_started.htm%3FRINoLog28301%3DT & mgr = agm & wnd = ___defaultSystemWindow___ & agt = wsm & ctxid =
I expect to be able to get to the context-sensitive help for the 3004 category to
http://sps01:8081/Robo/bin/Robo.dll?TPC=%2Frobo%2Fprojects%2Fkeystone%2Fgetting_started%2f getting_started.htm%3FRINoLog28301%3DT & mgr = agm & wnd = ___defaultSystemWindow___ & agt = wsm & ctxid = 3004
But I don't know if the same page by default.
I tested on a number of HelpID familiar work otherwise, so I'm happy with my card ID.
Looking at the deployment of RoboEngine guide, examples of URLS on page 30 have (RoboHelp Pro only). I am created with RoboHelp X 5, it's my problem, my version not support context-sensitive help in WebHelp Pro?
Any help would be appreciated.
Problem solved. Thanks for the tip on the CSH test tool. I tried to use it and found that it was not launching help at all. It made me study my maps. Looking for card ID 3004 mapping, I found that it * was * a topic mapped (to the Unassign button has been activated), but there is no title in the subject. It seems that there is a broken link on the subject. I have not assigned the mapping, then then reallocated, and the problem was solved.
In total, he had 5 broken mappings, including all the ones I was testing!
Thanks again for the pointer. The CSH test tool works pretty well actually.
How context sensitive help working with the master - situation of the external help files?
Here is my scenario:
I have a master's degree. HLP, which connects to 5. External HLPs. I connected the. CNTs and index in the Master. I gave all the output files (6 sets of.) HLP, CNT. NEWSPAPERS and GID files) to the programmer and asked her to put them all in a single directory. Everything works well for the table of contents in the Master. HLP. In other words, these external link sections are listed in the table of contents and the content displayed is selected. However, when the application attempts to display the HCS to a subject in one of these related HLPs, the user receives the error 129 (the subject does not exist). But these CSH to a topic in the Master. HLP works very well.
The programmer told me he puts the code in a registry for the CSH file look for the master. HLP only. And he cannot create multiple registry files or put multiple lines in this file of registry to search for multiple .HLPs.
The application is developed in the form of Oracle and is hosted on a Windows XP machine as a Windows application. I use RH X 5. The project is a HR Word project.
Is it possible to generate one. HLP to include everything? If so, how?
I found a solution for my situation this morning.
Just brought these subjects with the ID of the map and the map file to the Master.HLP. If I need to mod a few links to external links, exit works.
Just need to get some sleep.
With the help of Flash CC on my Mac. Connected to CC account.
My understanding is that I should be able to highlight a term in the actionscript (like flash.display.Sprite) pane, and I should be able to control - click it, select "Show help" and take just for a useful article in the section help.
But whenever I do that, need me just to the first page of the Web site using Flash (http://help.adobe.com/en_US/flash/cs/using/WSd60f23110762d6b883b18f10cb1fe1af6-7beba.html). Which leaves me with a huge amount of sort to find the appropriate help section.
I'm doing something wrong? This feature simply not work? I have some obscure preference wrong somewhere?
I seem to find any help for Flash or Actionscript is a frustrating and labyrinthine process. Very frustrating!
It is often easier to simply go to the web somewhere - other than Adobe - to get an answer.
Then, of course, if we are not asking a question, instead of getting a straight answer, I am usually related to some long, long, article that provides comprehensive information and what a response wave. It seems that people throw rather an encyclopedia to me that in order to provide a simple answer.
You can download the files of help here: http://helpx.adobe.com/pdf/flash_reference.pdf
context-sensitive help on windows that works, works with the online help.
I don't have my mac flash cc activated this weekend, so I can't test there.
my work of collapsed app coil system, help printer does not work
1. What is the brand and model of the printer?
2. do you have an error message when you try to print?
3. were there any changes (hardware or software) to the computer before the show?
Perform the steps suggested by chan seen from the link below and see if it helps.
Hope this information helps.
IM new in OATS for work in Oracle load test, I installed component OATS (agent), Server components, weblogic Server.
Installation is almost successful but an error message that I Ingore, but when I want to Activate the service startup work OTS I the following:
[[email protected]]#/sbin/service--statut-all |] grep OATS
OATS Manager Agent is not running
OATS Helper Service does not work
[[email protected]]#/sbin/service OracleATSAgent start
From oats-am: [OK]
[[email protected]]#/sbin/service OracleATSHelper start
From oats-hs: [OK]
[[email protected]]#/sbin/service--statut-all |] grep OATS
OATS Manager Agent is not running
OATS Helper Service does not work
Please help me
PL don't post duplicates - Problem installing OATS
My P6 help link does not work in the Help menu.
P6 library and Support link work.
As suggested in another discussion, I tried to update the link in Admin > setting Application and restart weblogic, but system still takes another link that I defined in the application setting.
Can anyone help?
We have worked on this issue,
In the application of P6 EPPM Admin in the corresponding configuration in P6 help url, we changed the url from http://hostname:8203/p6help/help to http://hostname:8203/p6help/and we have restarted the P6 server in weblogic console.
Then all fine now
If a command or the indicator is on a tab, the context-sensitive help for that apparently no longer works. It's particularly embarrassing for clusters of complicated example.
Is there a workaround I'm mising?
Example: This is the context for a cluster (A) and for the same cluster help when placed on a tab of the control (B). Case B is obviously completely useless.
It is true that it is not fixed for 2009. I checked the condition of the CAR and it does not just he makes to the 2009 version. It is always open and it looks like they still want to fix in the future, but no guarantee on which version.
I work on a project to RoboHelp 6 WebHelp (using Internet Explorer 6 on a PC running Windows XP, Service Pack 2) and trying to create a context-sensitive help for an application server.
I got a list of IDS of the card by the developer, created a map file, mapped (at least I think I have it was a success) the aid project map ID and card #. Update the WebHelp. Has launched the CSH text tool. Selected to test the project locally (off line), entered into the topic of startup (default) name file, pick him ' < ProjectName > .h ' file mapping, selected a number card, and click on view help. An hourglass appears briefly, then nothing. This is not what I expected.
Can I print a report card ID for the project, and none of the icons in the dialog box change the ID of a yellow card. Is there something to load? Somewhere else to look at? Another way to specify?
Thanks in advance for your help.
Posted by: bbleft
Obviously for the Test of CSH tool work, the 'record' is entered in the text box must be the FILE START and not the default theme, correct?
It is correct. It refers to the physical location of your webhelp output, but includes the startup file (for example projectname.htm).
Posted by: bbleft
Also, during this project, I may have topics merged and then deleted the startup file since I don't see it in the see also list. This being the case, create a new boot file and call it index would be acceptable or even recommended?
It should be OK to do. Just make sure that you recompile and generate before the test. Call CSH does not care what happened to a file until there where you said it would.
I use RoboHelp HTML on RoboHelp X5.0.2 and generate a .chm output.
Currently, I have a master project merged with several projects of slave and try to add context sensitive help. So after I add the ID card in the projects of the slave and recompile everything, are those map ID merged into the main project? In other words, when I call the main application, the master help file help file still will recognize the card slave IDs? If not, does anyone know a way to make merged work context sensitive help?
With the help of Pete I finally understood that.
Pete mentioned that:
"That does not explain the Helpware site is the section of the .hhp file ALIAS must contain at least one free reference of bookmark in the file redirect.htm; If all the lines in the forwarding section has a bookmark that is appended to the end and then the context help call will fail. So to solve this problem, I added the following two lines to your .hhp file:
Dummy_Unused = redirect.htm
#define Dummy_Unused 0
Thanks for your reply. I tried assigning the ID of the map after changing the file extension, but nothing helped. Your comment on the ID of the card being always assigned to .htm made me check the ali file where it was indeed still .htm. I edited manaually cela and hey presto it works now.
I'm linking my context sensitive help by using the RoboHelp_CSH.js file in my web application.
The correct topic opens when I click on the help link, but it opens in a pop-up window. This causes problems in Firefox and Chrome (which blocks the popups by default).
Is there anyway to force the contextual help topics to open in a new window?
I tried to add
which opens a tab empty in Firefox without content inside. And it works in Chrome either.
Anyone encountered this? Any help is greatly appreciated.
Hi and welcome to the forums.
Using the RoboHelp API, it is quite an annoyance. (Read: great pains)
Fortunately, there's a simple solution:
> newwnd = false "target ="blank"> help
This link does exactly the same thing, opens to aid in a new browser window.
You may also be interested in my custom WebHelp API: http://www.wvanweelden.eu/blog/2012/08/03/custom-webhelp-apis
Take a bow
I'm working on a help system for a web application. It will include context sensitive help triggered by an icon on the screen, and the subject is open in an iframe with a defined size. The developer has already implemented the iframe that appears when you click on the icons. It gives me the ID for the screens with the help of the icons as a java full qualified file name. I'm not sure what would be the correct process in RoboHelp to map the ID's for the subjects.
1. can I create a map file using the list of the IDS of the developer send me? Would it not be in this format:
#define Field_Name Java_File_Name
2. I don't then add the ID to the help topic appropriate using pod folder contextual help in setting up a project?
3. when I generate the layout I specify the map file I created above (.h extension)
3. If the developer already put in place the size of the iFrame, is it correct that I don't need to create a custom window to configure size? Is it possible to put so two open shutters? (I think using the method above a pane opens with the link to the navigation pane)
Thanks in advance,
Check the project configuration > context sensitive help > map files. You can assign IDS the developer send you to topics. If you want to play with the mapping files, you must create mapping files (.h) and the alias file (.ali). Just assign a unique ID to a topic and open these files with Notepad to see how you should format these files.
Take a bow
I have read many topics on this forum I could find on this topic, read the pages of Peter Grainge with control, expanded my search to other areas of the web, even read the help of Adobe. I'm still confused how to implement context senstive help using markers TopicAlias. I hope someone has details.
TCS 2.0 (RH8 integrated with FM 9) output is Webhelp
All TopicAlias markers are presented and collected in HR as MapIDs. I am the deduction is of these MapIDs is the same as TopicAliases. So far so good? I don't like digital HR MapID on rights holders. I am interested in the TopicAlias recognized. Reason being, I'm swapping the current configuration of WebWorks HR and must preserve the concept of the call using the sensntive context. For example. WebWorks uses a string such as:
.. wwhelp/wwhimpl/js/html/wwhelp.htm? Context = project_user_guide & topic = topic_alias2
I have provided enough details for people warned to get the picture? Is there a method anyone know to make it work?
Moreover, I also tried to create a new window and get context-sensitive help to be called using the method index_csh.htm #topic_alias. That it produces a blank page. I can't find any instructions how to get the CSH method buried as an obscure element HR to work (if that is an option here).
Thank you very much in advance for any idea, anyone can provide.
To custom windows (defined in the aid project), add ">" followed by the name of the window ("" / help/help.htm > mywin ' ") and it shows that you have missed the symbol" > ".
Is all the elaborate help and the support in the CSH API
With the help of win 7 and firefox 43.0.1, I have 4 computers and now all have problems with yahoo and yahoo mail doesn't work does not correctly. Loading sites, but most of the features are missing and clicking on what whether changes to the lists of text. I have disabled flash / anti-spam etc., cleared cookies and cache and even firefox loaded down once again and have upgraded, no help. I'm forced to use IE now.
I tried Yahoo support, they said try Firefox... In any case, it's Firefox and I found a solution using the 'Refresh Firefox' button. Whatever the problem was fixed on two of my computers so far. Got to update my setting again but it's 10 m, compared to the 10 hours I spent trying all that is nothing.
Thanks for the help!
There, I noticed that I have the numbers in brackets next the terminal names to a VI in the context-sensitive Help window. I think that this has happened at the time that I started to play with the VI Analyzer, but I don't remember for sure.
Does anyone know what it is and how to hide them?
Turn off VI script information in the pop-up Help window. Options of-> VI Server
Maybe you are looking for
I click on an e-mail, it is reproduced below, but no content, empty, just the senders name/email address. Nothing else. I try clicking on/double clicking in the field, but nothing.
That recently started having problems streaming to my TV via Apple TV Air Display iMac. Started getting the msg "Unable to connect to Apple TV". After a repair all imaginable possibilities, the only solution is to restart Apple TV by unplugging / p
This ([email protected]***) email me is send emails with links asking me to change my password ID apple, that it actually belongs to the support team apple or someone trying to hack me?
Hello When on is a copy - paste in the diagram of an object in front, a new object is automatically created. If the fact a copy - paste of a local variable associated with an object en front, a new object is also created on the front. There - it a wa
When I press 'Send' the e-mail message remains in my Outbox. I receive a notice indicating that an unknown error has occurred. It is written in the details ' Windows Live Mail error ID: 0 x 80070057. So now, while I always get emails in, I can't send