continue to be "WindowsUpdate_8024200D" "WindowsUpdate_dt000" I've updated all the disks and still a problem
continue to be "WindowsUpdate_8024200D" "WindowsUpdate_dt000" I've updated all the disks and still have a problem. have tried all what windows help suggested and still used to install
Hello
Thanks for posting in the Microsoft community!
I understand from the description of the question, that you found WindowsUpdate_8024200D. I'll be happy to help you on this question.
Please follow the steps mentioned below and get back to us with the results.
Windows Update error 8024200d
http://Windows.Microsoft.com/en-in/Windows7/Windows-Update-error-8024200d
After trying the steps above suggested, giving us the results. If you are unable to solve the problems of Windows Update or display us additional troubleshooting results.
Tags: Windows
Similar Questions
-
Had upgraded LR 4 to 6 a few months ago. Have updated all the software and am running LR 6.4 and 9.4 Raw. Mac also improved to 10.11.3 software. Camera not too new... Nikon D800e. Always make me the note 'files were imported not because they could not be read ". Any thoughts? Thank you
This means that you don't have WRITE permission in the destination folder.
You should:
- In Lightroom, determine the exact destination folder (it is on the right side of the import dialog box under Destination)
- Change the permissions in your operating system on this specific file WRITE permission; OR Change the destination folder in a place where you don't have WRITE permission
-
I CS5.5 Master Collection and you want to transfer to a new laptop. The CS5.5 was an update for CS3 Design standard and I have all the disks and serial numbers. I just uninstall both programs a laptop and install them on the other?
You can do it, but you don't have to install cs3 in order to install your upgrade of cs5.5.
You can launch the installation of cs5.5 and you will be asked your cs5.5 serial number. Setup will ask you then select the product (in a drop-down list) calling. Select cs3 and you will be prompted for the serial number for cs3.
Enter the correct number at the right time and to proceed with the installation.
If you no longer need these programs on your old laptop, disable (help > deactivate) before uninstalling so that you can keep your two activations.
-
Accident id also does not work, and does nothing when I ask for more details.
Hey,.
well, it is a known incident, please try the following (he reported to work for some users):
You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).
Then perform the following steps:- Click on the orange top left Firefox button, then select the 'Options' button, or, if there is no Firefox button at the top, go to tools > Options.
- In the Firefox options window, click the Advanced tab, and then select 'General '.
- You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
- Now restart Firefox and see if the problems persist.
In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:
Update your graphics drivers to use hardware acceleration and WebGL
This solve your problems? Please report to us!
-
- http://Lenovo t14 22U 2522
-
Received phone call from someone who identified himself as a member of the Technical Support of the Windows team. Says my calculation had sent messages back saying that I had a virus. Was skeptical and didn't know how to check if it was legitimate then toldl him I would take care of him. Ran Norton Security and Windows security and both reported that my system do not have a virus. Noticed that Windows update was not the last 2 weeks so I tried to run the updates. I get a sayingi error message that FAILURE of installing up-to-date security for KB2656353 and KB2656370. I downloaded all the patches and recommended tools. What should I do?
Have you tried the recommendations in this thread:
and this article:
-
I installed 5.6.2 Pages but all my old documents will open with ' 08 v.3.03 How can I remove the Pages ' 08 and update all the old documents
5 pages is located in your Applications folder.
Pages ' 08 is located in your Applications/iWork ' 08 folder.
If you open your old documents Pages ' 08 with 5 Pages it will convert and if not damage, remove a large number of useful features.
You will probably regret upgrading to 5 Pages which Apple has made extremely inconsistent and keeps changing its file format.
Peter
-
I tried all these steps and still no progress, cannot update or restore my phone. When you try to restore an error appears saying 'cannot find the phone (9).
We do not know what are the following steps, because you have not provided their. Support this article has suggestions for your specific error code.
If you see errors 9, 4005, 4013, 4014, when you restore your device iOS - Apple Support or
-
Remove all the patches and windows updates
Hello
How can I remove all the patches by using the Recovery Console - command prompt environment. Is it possible to remove all the patches. Where are all the patches and updates KB is stored in the Windows VISTA Business operating system. Help, please
Thank you
Concerning
AnoopHi Anoop,
Thank you for writing to Microsoft Vista Community Forums.
You can uninstall patches to a command using msiexec.exe and command line Options.
For more information about the removal of patches of command prompt, access the link below: http://msdn.microsoft.com/en-us/library/aa372104 (VS.85) .aspx
It will be useful.
Thank you and best regards,
Srinivas
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think
-
I have a Hp Pavilion Media Center Edition 2002 running. How will I know if I have all the patches and updates, I need? Also is free upgrade to the edition of 2005?
Hi Philofduluth and thanks for posting.
There is not a free upgrade for Media Center 2005. If this is something you would like to do, I contact your OEM manufacturer and ask if there is a software upgrade, they can provide you.
If you have all the updates that are available for your system go to http://update.microsoft.com . Here, you can see all the latest reviews and optional updates that may be available to you and make install.
I hope this helps. Let us know if you have any questions.
Shawn - Support Engineer - MCP, MCDST
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
I have a portable Gateway that will not start, but rather when I turn on the laptop, it gives me a box of caption read "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation. I bought the recovery CD gateway and even made the recovery discs offered by Microsoft, but nothing helped. Or recovery CD were no help. I am running Windows Vista. Any suggestions?
I have a portable Gateway that will not start, but rather when I turn on the laptop, it gives me a box of caption read "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation. I bought the recovery CD gateway and even made the recovery discs offered by Microsoft, but nothing helped. Or recovery CD were no help. I am running Windows Vista. Any suggestions?
Hey PeLon416
If you have problems with the gateway recovery process, you will need to contact Gateway
It's their recovery process not microsofts
You may have a hardware problem
support of bridge at the link below
http://support.gateway.com/support/default.aspx
Walter, the time zone traveller
-
Update error... I tried to update for the month and each time it fails
I tried to perform updates for the month and each time it fails. I get the same error message... Code 646 WIndows has encountered an unknown error. I did troubleshooting and you are unable to find assistance. I don't know much about the workings of the computer, but I know that I should be able to perform these updates. I think I need it too. I have 9 at this stage that it cannot load. Help, please!
I tried to perform updates for the month and each time it fails. I get the same error message... Code 646 WIndows has encountered an unknown error. I did troubleshooting and you are unable to find assistance. I don't know much about the workings of the computer, but I know that I should be able to perform these updates. I think I need it too. I have 9 at this stage that it cannot load. Help, please!
This link leads to a response from Bobby Mi, moderator.
Date: July 6, 2010
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/18449f60-C149-4EAF-B8E6-a2880cd7232bBobby Mi response will lead to this tutorial from Microsoft Support:
http://support.Microsoft.com/kb/2258121Hope this can help solve your problem.
For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem. -
I'd appreciate any advice really - when I was accessing my media on my blackberry Desktop Manager Manager I've been invited to accept updates that I did - it seems to have downloaded a new blackberry desktop and I lost all the photos and vids I stocked up on previous - such a freak out as about 3 years worth of travel and pictures of the family and of the videos stored in my manager of blackberry desktop software
Appreciate any help thanks
Anything sync'd through your BDS is stored in a folder somewhere... usually My Documents > my pictures > BlackBerry (or my videos > BlackBerry). It depends on the path specified for the folder when you set up the synchronization of the image.
-
Hello! I just accepted updates my Blackberry Desktop includes all Blackberry Desktop manager treats me like a new. And freaked out as all THE Photo and video recorded on the old Media Manager Media Manager are worth more than 3 years gone-Its photos and videos that I have stored on the Blackberry Desktop that existed before the update
Really freaked out because these photos are irrepalcable would appreciate advice thanks
Hello
Have you checked to see if the pictures are found in your Documents folder by browsing until then on your computer system?
What version of the Desktop software update you? Select the [?] is the top right and select "on BlackBerry Desktop Software. Version 7.1.0. ? or 7.0.0. ? or 6.1.0. ?
-
HP DV6 of the computer stopped working after the update of the Bios and Memoryupgrade
HP DV6 - 3161EO
XE068EA #UUW
Hi, I bought a brand new HP with Intel I5 processor computer and GUI double, its been working well so far and I thought that I should upgrade the Bios and memory as well.
So I did, I bought memory 10600 and crusial 12600 and corsair, a single and two put in correspondence of the sticks, just to be in business, and I've updated the bios. of F.13 to F.29
The computer worked perfectly for about 4-5 hours, then there are allmost quite dead.
Ive tried to pass on different memorycabsm like the original samsungs that came with the computer.
Ive tried the famous "hard reset".
Nothing, the computer starts "boots" but don't approach the entered message turnes off.
Presedure same each time.
Any memory I put in, the same result.
Ive used different powerbricks, turned of the computer resets hard, between 10s 2 min, picked up the bios battery, has offered free energy.
Let the rest of the computer for half a day, put it all together exept cmos battery = exactly the same as before.
"take out all the memories and the computer works and get that caps lock flashing light.
So my question is this
Why you encourage people to update, when it's clearly the fault at hand.
Sell your computers with 8 GB of ram from the beginning so the people do not have upgraded later because your hardware is not able to manage different memorycaps of accepted and authorized as crusial or corsair providers.
Ive built perhaps 50-60 computers and had about 10 laptops and NEVER had a fault like this.
My laptop $1200 is useless, and I actually held you at HP responsible of it.
The computer is of course out of warranty, so its my own falult, as usual.
«A simple question, is there a way to 'force' a new bios on the Board, without memory of the computer, because it is the only time where it works and works welll.»
Thnx, 'a sick owner HP.
For later use, it's really kff upward, but I got it working again.
1 changed the original memorycabs for much faster, 1600 mhz, I know that this mobo doesn't support, but he did start the computer, so I could run the Windows + arrows Bios recover.
Installed the HP bios tools F10 + GIS and it worked.
so I guess I have to myself a thank you and a boost of the kudosbutton, hahah
Well, when your computer went down, don't give up and try everything you can, this prob took me about 3-4 days to eradicate, but now its working again.
See you soon
Maybe you are looking for
-
I my house wired with ethernet and have logged as many devices via cat5e as possible. My problem is when I try to connect together the two apple airport extreme base stations and use the second to extend my network I lose the internet connection. I
-
How to configure the outputs voltage NI 9477
Hello I'm trying to control a motor using a cRIO 9074 with the NI 9477 module. I would like to configure the output voltage of the module and if I understand correctly, they vary between 5 to 60 v. How can I have a 24 v output? Thank you.
-
HP Pavilion dv6t-7000 - Ralink RT5390 Wireless Upgrade
Hello I'm looking forward to replace my wireless card, I noticed a stamp on my wireless card informing me that I have to replace with HP SPARE, I scanned the bar code "670691-001" and I found that it is the WiFi card Ralink RT5390... can I replace it
-
Uncomment administrator windoms 7 HP Touch Smart
Uncomment Administrator windows 7 HP Touch Smart
-
PHP connection with ksoap and nusoap
I got a problem here. I tried a simple code to connect php and java with ksoap and nusoap. When I run this program in the Simulator, just loading program and my Simulator cannot click more. and that never stopped loading... When I am trying to test t