Continuous backup of statement he jumped a file that does not exist on the drive is not meant to save.

Similar Questions

• Sites of bookmark in the file that does not appear in the window

  I need to put several websites in a folder, I named "Accessories". He is not one of the four files in the drop down window. So, I have to save it in one of the four and then open that folder and move the site to the "Accessories" folder

  Is it possible to change the four sites in the window (two of them that I haven't used in years)? Then go straight to this folder?

  The seal shows what is happening.

  What I want to do is to click "bookmark this page" and be able to put it directly in a folder.

  I want to change the four folders listed in the drop-down list.

  What I do is put a bookmark in the 'Western Short Story' folder, and then open up the bookmark in the "Accessories" folder that does not appear in the box.

  It's not a huge deal, but I'm working on about 20 sites today and I would like to save a few steps.

• After the sync iphone list with windowns address file that does not appear the list of contacts

  I worked with a technology from Apple to download the latest version of the iTunes Store to be able to backup my IPhone Contact list and synchronize the folder list of addresses of windows on my PC. After sucessful completeion contact list does not display the address of windows. At the far left of the address is an icon showing a shared folder. When you click on it nothing happens. Why can I not see the list of contacts that has been synchronized?

  Hi MarkStewart_818,

  You can consult the Knowledge Base article mentioned below and check if it helps.

   

  iPhone, iPad, iPod touch: Troubleshooting contact and calendar syncing via USB on Windows

  http://support.Apple.com/kb/HT1692

  For any additional help, contact iPhone Support.

  You can also ask your question in the discussion forum for iPhone Support.

• How can I stop getting files that no longer exist in the SEARCH

  When I use the search I'm included in the list of the files/folders that no longer exist. Error message begins - the document name or path is not valid. How can I stop this? Thank you

  Hello

  Method 1: I suggest you run the fixit from the link and if it helps:

  Diagnose and repair Windows files and folders problems automatically

  http://support.Microsoft.com/mats/windows_file_and_folder_diag/

  Method 2: You can also try to rebuild the search index and check if it helps:

  Change advanced indexing options

  http://Windows.Microsoft.com/en-us/Windows7/change-advanced-indexing-options

• How to apply the upload of a file that does not create an error in edit mode?

  Hello

  It seems rather simple, but maybe I'm missing something (hoping that I'm not)!

  We use the Apex 5.0.1, but I believe that this is the case for other versions as well. At least that which was already identified and fixed in the latest patch.

  Here's the scenario:

  1. we have a table EMP where we maintain details about employees.

  2. we have an EMP_FILES table where we maintain one or more document (s) of support for each employee.

  3 page P1 displays the details of the PMCS with an IR showing the list of documents associated with this employee. This page also has a button called "New Document" when you click on it, takes users to P2 where they can upload a new document. The IR has an 'Edit link ' who also takes users to P2 where they can modify the file information (such as comments, date expiration etc.) or replace an already the document with a new document.

  4. we need to force users to download a document, when they save it in P2, then the easiest option was to highlight ' required ' 'Yes' as shown below:

  

  5. This works very well for a 'New' file upload / insert features.

  6. when users click on edit link to access the P2 and if they do not want to replace an existing document with a new document, but want to update the rest of the file info (like comments, expiration date etc.), it throws errors illustrated below:

  

  7. to address this problem, we put 'Value required' on 'No' and check the length of the BLOB in DB trigger BEFORE INSERT or UPDATE, as shown below:

  CREATE OR REPLACE TRIGGER BEFORE INSERT or UPDATE ON Biu_files files FOR EACH ROW

  DECLARE

  BEGIN

  IF NVL () DBMS_LOB.getlength () : NEW.fle_contents ( ), 0 ) < = 0 THEN

  RAISE_APPLICATION_ERROR () -20000, 'Please make sure to download a file not empty'. );

  END IF;

  IF THE INSERTION

  IF : NEW.fle_id IS NULL THEN

  SELECT fle_id. NEXTVAL IN : NEW.fle_id FROM dual;

  END IF;

  ((: NEW.fle_created_by: = APEX_CUSTOM_AUTH.get_user ( ) to REPLACE NVL( ) , "person", USER (), USER ();

  : NEW.fle_created_dt: = SYSDATE;

  ELSIF UPDATE THEN

  ((: NEW.fle_modified_by: = APEX_CUSTOM_AUTH.get_user ( ) to REPLACE NVL( ) , "person", USER (), USER ();

  : NEW.fle_modified_dt: = SYSDATE;

  END IF;

  END;

  /

  SHOW the ERRORS;

  8. If I understand correctly, the file upload in the APEX is nothing other than an action of 'INSERT + UPDATE' in the same folder. For example when we upload the fresh file, it creates a record with EMPTY blob and immediately update the record with the contents of the blob. Thus, regardless of whether or not users select a file, it would raise an error as mark is right at the top of the trigger code.

  9 ok, well move this piece of code at the top to UPDATE section because we want to allow the insert 1 to cross. But the problem is... Download the second part of the APEX file, which is updated would happen only if there is a selected file. If there is no file selected, ONLY the INSERT is pretty good. Thus, within the section of UPDATED trigger validation would never run for a fresh download.

  If someone has encountered this? I can't imagine that we are the 1st :-). Happy to provide / discuss it further. Thank you in advance!

  Kannan Kumara says:

  It seems rather simple, but maybe I'm missing something (hoping that I'm not)!

  We use the Apex 5.0.1, but I believe that this is the case for other versions as well. At least that which was already identified and fixed in the latest patch.

  Here's the scenario:

  1. we have a table EMP where we maintain details about employees.

  2. we have an EMP_FILES table where we maintain one or more document (s) of support for each employee.

  3 page P1 displays the details of the PMCS with an IR showing the list of documents associated with this employee. This page also has a button called "New Document" when you click on it, takes users to P2 where they can upload a new document. The IR has an 'Edit link ' who also takes users to P2 where they can modify the file information (such as comments, date expiration etc.) or replace an already the document with a new document.

  4. we need to force users to download a document, when they save it in P2, then the easiest option was to highlight ' required ' 'Yes' as shown below:

  5. This works very well for a 'New' file upload / insert features.

  6. when users click on edit link to access the P2 and if they do not want to replace an existing document with a new document, but want to update the rest of the file info (like comments, expiration date etc.), it throws errors illustrated below:

  Set the validation property default value is required on file upload on No.element.

  Create a validation of Non Null point about to file download pages and subordinate, for example the button CREATE is clicked and the PK null line item. This will ensure that the validation is done only when you insert a new file and check the updates that do not involve a file upload to be accepted without error.

• PC tries to find a Dll file that does not exist

  A message suddenly started appearing whenever I turn on my PC: 'RunDLL - error loading c:\Windows\DOWNLO~1\WhlMgr.dll'.

  I can't find any programs on my PC that have 'Pm' name who might be looking for this file. I also looked into programs that are open at startup - nothing there either.

  Any ideas how to stop this annoying message coming?

  Thanks for any help that anyone can give.

  Hello

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  If the problem persists after scanning, take these startup entries:

  "Autoruns for Windows V11.32"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  See you soon.

• How to unzip a file that does not recognize that it is compressed, but that is compressed into effect?

  I downloaded a file, in fact, it is technically a folder with 12 files it contains, but my computer thinks it's a music file and try to open it with itunes. Of course, itunes can't directly open it. How to unzip and extract the files.

  Hello

  You can uninstall WinZip and use them: set the built in Zip works if you ever need and
  then install 7 - Zip which is free.

  Uninstall WinZip and restart 1.

  1st 3 here should fix you up

  How to restore Vista built-in ZIP files Support
  http://www.Vistax64.com/tutorials/65254-zip-file-support-restore.html
  How to enable or disable the files compressed in Vista
  http://www.Vistax64.com/tutorials/93827-zip-file-compressed-folders.html
  Restore the Type Associations by default Vista file extensions
  http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html
  ---------------------------------

  Once the above is working:

  Download the. EXE version - SAVE - go where you put it - click on - RUN AS ADMIN

  7-zip
  http://www.7-zip.org/

  ---------------------------------

  If necessary:

  How Unassociate a Type of Extension file in Vista - and a utility to help
  http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.html
  Restore and return the file Association in Windows Vista if Original
  http://www.mydigitallife.info/2008/06/22/restore-and-reset-file-association-in-Windows-Vista-back-to-original-default/

  Reset and Fix Broken Windows Vista file Ext and Type Associations (include EXE, COM, SYS, ZIP, LNK,
  Folder, drive)
  http://www.mydigitallife.info/2008/06/22/reset-and-fix-broken-Windows-Vista-file-ext-and-type-associations-include-exe-com-sys-zip-lnk-folder-drive/

  For Windows Vista file association problems
  http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• [SOLVED] Backup Windows 7 gives an error message 'file ignored' for a subfolder that does not exist in Documents

  I am running with "Backup and Restore" backups in Windows 7 Professional and constantly get this error in the logs:

  Backup has encountered a problem during the practical C:\Users\Tim\Documents\Blender file backup. Error: (the system cannot find the specified file. (0 x 80070002))
  "Practical Blender" is a folder I previously removed documents and backup should not be looking for it. I tried to remove the job from the scheduled backup with Windows Task Scheduler and create and execute a new backup job, but the problem goes away. It is only this specific file gives me this problem. I deleted the other folders of Documents before and since it was started without any problem of backup.

  Is it possible that I can stop backup to find this file that does not exist?

  What happens when you recreate this folder?

• When I try to print a PDF file it does not print and goes directly to a backup of the file option.

  When I try to print a PDF file it does not print and goes directly to a backup of the file option

  original title: pdf print
  Hello

  1. don't you make changes on the computer before the show?
  2. don't get any error message?
  3. what version of the operating system is installed on the computer?
  4 is the issue limited exclusively with printing PDF files?
  5. where are you printing from PDF files?
  6. What is the brand and model of the printer?

  
  Method 1:
  Run the fix it and check.
  Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/
  
  Method 2:
  Perform the steps from the link and check.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
  
  Method 3:
  You can perform the steps from the link and check if you are able to print.
  Resolve PDF printing problems. Acrobat, Reader
  http://kb2.Adobe.com/CPS/873/cpsid_87346.html
  
  Reference link:
  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

• When I run the Defragmenter I end up with large blocks of fragmented files that will not move much matter how many times I run.

  The report telling me I need to defragment this volume.  Total of 20% of fragmentation, 41% free space fragmentation 0% file fragmentation.  The last time I've run the defragmentation tool I don't remember this existing problem.  I think I would have noticed these large areas of red and he questioned.  It was about six weeks ago.  My computer worked more slow and sometimes simply hanging.  I downloaded Firefox a few weeks ago, but slowdown problems existed before this and I have not downloaded anything else except a program to deal with DOCX. files that do not seem to help me so I got rid of him. That's four months ago or not.  I ran so many tests I can think... hard drive check... cleaning disc etc...  I don't know how I got in this mess, nor how to correct.  I seems to me just that I close up with a disk full of files that are fragmented if I can't find a solution.  Any help would be appreciated more with gratitude.

  Please answer the following questions:

  1. What is the size of your hard drive (C :) and the amount of free space is left? (Open my computer, right-click on the icon for drive Local (c), select properties and declare what you see in the 'Général' tab for the used space and free space.)
  2. Even if you have the properties of the State open, (c) if the box down to "Allow the Indexing Service to index this disk for fast searching of files" is checked or unchecked.
  3. Right click on desktop, select Properties, and select the tab "system restore."  Is the drive (C :) followed by the system restore?  Assuming that the answer is 'Yes', make sure the drive (C :) is selected and click on the 'Settings' button.  What is reported as the amount of used disk space?  For now, simply "Cancel" your way out of these settings screens.
  4. You use integrated Windows XP Disk Defragmenter or are you a 3rd - party for this program?
  5. What version of XP, including the service pack is installed?
  6. What do you use to apply antivirus (include the version) and your membership is up-to-date?
  7. Have you scanned your system recently with MalwareBytes Anti-Malware or SUPERAntiSpyware?

• Error: "the file is maybe damaged. the file header does not match the checksum calculated"during the installation of Windows 7/8

  * Original title: Question of re-Installation of operating system.

  I got the message during win 7 / Win 8 installation.

  "the file is maybe damaged. the file header does not match the checksum calculated.

  My config - processor Intel C2D, 2 GB of RAM, Intel motherboard, 500 GB HARD drive

  I have also replace Win 7 DVD and DVD player also replaced.

  I also reinstall my single RAM chip so many times. but the problem still exists.

  During Win XP SP 3 installation, no such message type not displayed. I can install it easily.

  Pls help me Sir, I would like to Win7 in my computer again.

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem, it seems that you are facing the question with the reinstallation of Windows 7 on your computer.

  Because the computer does not recognize the CD - R into the DVD player probably boot order is set to hard drive first. I suggest to change the DVD boot priority in the BIOS and then try to perform the Startup Repair.

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  In order to make changes in the BIOS, I suggest you to contact the manufacturer of the computer.

  Method 1:

  Unplug all external devices connected to the computer with the exception of the keyboard and mouse and check if the problem persists.

  M odes 2:

  If the problem persists try the Startup Repair. It is one of the recovery tools in the System Recovery Options menu. This set of tools is on your computer's hard disk and on the Windows installation disc. To learn more about Startup Repair , you can refer to the below mentioned article:

  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  Method 3:

  In addition, if startup repair is not enough, you can perform a system restore, check if it helps you to solve the problem. For reference, you can see the article mentioned below.

  What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Note: when you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Automatically Reload external files modified does not

  When I modify an external file (eg with Notepad ++), the function automatically Reload external files modified does not work.  This is regardless of whether or not the boxes automatically Reload external files changed or silently reload when file is not modified are checked in the preferences of the environment.

  Oracle SQL Developer 4.0.2.15, 15.21, x 64 build

  Java Platform 1.7.0_55

  Windows 7 Professional 64 bit

  I noticed other forum threads has this connection, but they have all been archived:

  https://community.Oracle.com/message/1244946#1244946

  Bug 9.0.3.3: no editor refreshment for files modified externally

  The current solution - use SQL Developer 3.2.20.09 instead.

  The links that reference you are dated, and one (in fact for JDeveloper) predates the existence of SQL Developer.  Auto-recharge works fine for me, both for Notepad and Notepad ++.  Given that it also works for you with the 3.2.2 version, I can't that assume your user for 4.0.2 settings got corrupted somehow.  If you have migrated the 3.2.20.09.87 or any other rejection of some, I recommend...

  1. exit SQL Developer

  2. delete or rename %APPDATA%\SQL Developer\system4.0.2.15.21

  3. remember that Windows by default, considers the part folder AppData C:\Users\\AppData to be hidden.

  4. start SQL Developer and jump in front of all the guests on the migration of user settings.

  Hope this helps,

  Gary

  SQL development team

• I can't transfer photos from iPhone to MacBook Air. When I opened the Photos on a Mac, there is no tab 'import' alongside the actions, projects, Albums. iTunes is up to date. File menu does not appear iPhone

  I can't transfer photos from iPhone to MacBook Air. When I opened the Photos on a Mac, there is no tab 'import' alongside the actions, projects, Albums. iTunes is up to date. File menu does not appear iPhone

  The "import" tab appears only when the iPhone is connected to the Mac via a USB port.

  ITunes detects your iPhone when it's connected?

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

• How to access the tab 'Save all' when I close several jpeg files that have been adjusted with the "color adjust tool? He is currently making me close and save one at a time. Thanks for any help :)

  How to access the tab 'Save all' when I close several jpeg files that have been adjusted with the "color adjust tool? He is currently making me close and save one at a time.  I've just upgraded to El Capitan.  Thanks for any help :)

  I assume that you use the application overview.

  I can't find an answer to back up everything, but a workaround could be while the file menu options are visible, press the option key

  and the point of the window will become close, if you click on that dialogue will ask you if you want to restore the changes or save

  pressing Save will close the image with the changes and then move to the next image and so on.

• Show files that are not removed

  Hello world!

  I need to find a way to display the files that are not deleted, but my code shows me just the last file that is not deleted...

  (True and false are written in red, because I use a french version of Labview )

  If anyone can help... Thanks in advance for your answer!

  

  crossrulz wrote:

  Something like this should work.

  

  Or if you want to keep this code on a postage stamp, you can use the tunnel contitional feature introduced in LabVIEW 2012.

  

  Come on Tim, get with the times