Continuous beep
My laptop makes a continuous beep when starting and stops with the use continues to the windows key. Please give me a solution or the area of suspect
Hello
"beep" codes normally indicate a hardware problem / failure.
Go to your computer manufacturer's website and look at the specifications of your PC to see what BIOS you have
Then read this on the 'beep' error codes to try to see what failed:
http://www.computerhope.com/beep.htm
http://www.pchell.com/hardware/beepcodes.shtml
http://pcsupport.about.com/od/nonworkingcomponent/HT/beepcodestb.htm
If you are unable to determine the hardware problem yourself, contact the manufacturer if under warranty.
If it is not under warranty, find a good repair shop premises to take.
See you soon.
Tags: Windows
Similar Questions
-
Equium A200 - continuous beep on startup
A colleague has spilled water on an A200 Equium and therefore it emits a continuous beep on startup. In fact, you get one beep, immediately followed another. However, if you press F1 it starts OK and all is well. I ran Diagnostics and found nothing wrong.
The only problem is that one or two of the keys work fine if you lightly touch them.Someone has ideas about resetting the sound signal, or what I could do? Thank you.
Andy
Hey,.
I think that it s is not easy to say why this is happening but maybe the water has damaged the keyboard and there so always will be in a hurry I don t he know exactly.
I think that it is not so useful for you if we discuss it here without test and we don t have made real for your laptop should be checked by a technician of the laptop. Guys can make a detailed diagnosis and order spare parts.
On the Toshiba site, you can find a list of good luck of suppliers registered!
:) -
Hello.
I have a Tecra M3 laptop. Open and he started. Continuous high one beep but you windows started normally. What a * is that? Noticed that pressing the corner bottom right is quiet, but you, I want to know what happens. Any idea?
Hello
Hmm that's really not easy to say what's wrong.
You said that the sound is altogether if you press the corner down right as I know that there is a volume control.
Maybe the volume control has anything to do with this continuous beep? :|Generally, volume control is soldered on the motherboard and I think maybe the motherboard must be verified.
Anyway, it looks like a job for a technician to laptop. Then try to contact the service provider allowed in your country and ask a details and manipulation of the Fryer.
Good luck
-
Satellite P10 504: continuous beep when turned on
My P10 504 beeps continuous shortly after it is turned on. It will stop beeping and will restart but return to the continuous beep. So he can start consists of hit the F2 and go into the BIOS and quit, then it start OK.
I pressed the keys during startup to see if it could be sticky keys, but that has no effect.
If I take the entire memory when you start it beeps to tell me that I have no recollection. If a bank is in the continuous beep back.One, then it tends to make Windows to automatically display the search tool and update constantly the screen except esc is hit.
Any ideas or other tests to be done?
Hello
I don't know where the problem is, but maybe you should try to reinstall the BIOS.
If this does not help, please contact the ASP in your country.Good bye
-
Satellite Pro A200: A continuous beep on startup top and freezing
Hello
It comes to Varun of India. Could someone please help me solve a problem which has been haunting me the last two days. This problem is currently arising in my Pro A200 satellilte. Actually, the problem is that one continuous beep sound from internal speaker at startup is when the name TOSHIBA appers at boot time and more it freezes it right of this screen. But, I still somehow using my system by pressing F5 or F9, and then let it start manually in NORMAL MODE.
But, I can't keep doing this all the time. And what is more, this beep blows continuously only when the system is started and it will hang up within the same screen until I press F5 or F9. I did restore my system but no use. Could someone please help me in this.
Sincerely, waiting for the answer...
Verhoeven...
Hello
To be honest, it's very strange question. What is some external device connected to your laptop?
Have you tried to update the BIOS to the latest version?Sorry, but I think that in this case, there is not a lot, you can do it. Perhaps the BIOS update, clean install of the OS. All that s.
Maybe you should contact the closest service and ask what it can be. -
Continuous beep on Satellite Pro 4600
Hello
I'm having a problem on my SP4600.
It works fine, but randomly there is a continuous beep when it starts the satellite slows very drassticly and the only way to get rid of this is to reboot (hard) the laptop, this happens at random, sometimes 2 x the same day, sometimes there's work for a day or 2. I don't know what's wrong.
I have updated the bios, set memory, ruled out the battery, put in the new hd, reinstalled XP a few times but nothing helped.Help, please
I found a topic with a simular question but there was no more response from each site.
THX in advance
Hello
It is not easy to say what the problem is. There may be a problem with the graphics. In my hardware comes intensive reviews check can give more answers.
Sorry, but I don't believe that you can do something yourself to solve this problem.
Good bye
-
Qosmio G10 - continuous beep on startup
Hello
I have a Qosmio G10. It worked well recently again. Now when I start it, I hear a continuous beep. There is also no image on the screen.
Can anyone help?
Thank you very much
Martin
Hello
I agree with dfj if you didn t Exchange some hardware components or even added a new one, there must be a hardware problem and you should contact technicians.
Good bye
-
Continuous beep on startup that goes once connected - Satellite 3000
I just brought a satellite laptop computer opportunity 3000-214, which worked well on the first departure to the top, but I turned it off then decided to turn right back on and now it makes a nosie continuous beep until windows load then stops. The machine then works perfectly since then. Any ideas.
[Edited by: admin on 5 February 06 12:45]
Hello
You said that the unit stops Windows load. Is the unit freezes or stops?
Have you checked the battery status? Try to remove the battery and after a few minutes trying to plug it in again. Try to start the device again.
If this doesn't help the Toshiba service should check the laptop. -
Continuous beep sound from my computer Acer Aspire 7540.
Original title: his record game
I get a continuous beep from my computer Acer Aspire 7540. How can I stop it except turn off the sound.
Hi G V Palmer,.
1 did you recent hardware or changes to the software of the system?
The system beeps are so important that it indicates system errors and warn you against system damage. When the processor system or Random Access Memory (RAM) or hard drive is not working properly, it will give the alert system using the beep.
I recommend you to check if the RAM and hard drive work properly.
You can also change the pattern of its Windows as 'None' and search for the question.
a. Click Start, click Control Panel, and select sound.
b. in the sounds, iselect 'No Sounds' tab under sound scheme, click Save as.
(c) in the Save Project dialog box under, type a name for the new sound scheme.
The new scheme appears in the model box sounds.
Check if you are still having the tone.
For more information, you can consult the following article:
Change the sounds of the computer
Hope this information is useful.
-
Continuous beep Acer Altos G530
The server has a beep continuous, spaced about 1 second interval. Fine boots, all three hard drives show green lights. Running windows 2000 server. No alerts on the desktop, showing problems. Is there a diagnosis that can be run either although software or BIOS to see what could be the cause of the problem. Is there a common problem (ie. memory) that would cause a continuous beep code.
Thanks in advance for any help.
It turns out that, even if the green lights were on all the hard drives, one of the disks had failed. I was able to enter the raid software and disable the alarm until I was able to replace the disk.
-
continuous beep on startup and the black command screen
I have problems with the boot on my computer laptop gateway. I bought it last year, and despite the update anti spyware and etc., he refuses to start after a black screen.it command refuses to go into hibernation mode is that drives me crazy. When I try to put it in this mode the red light that usually indicates the hibernation mode flashes 3 times faster and when I open the screen it displays the screen of welcome without a moments notice. is this just a virus? or is it something else. I don't have the keys sticky and I clean them every week and ran the antivirus program several times a week since I bought it.
Hello
Sound beeps are error codes that describe a problem with your machine. A continuous beep
can mean keyboard (loose or bad cable), losing the card, power, a short circuit or other matter according to the
System/BIOS manufacturer.Startup and select CONFIGURATION/SETTINGS (BIOS/CMOS) - usually F2 that you start - look to see BIOS
Creator, then see here:Computer MESSAGE / beep codes
http://www.computerhope.com/beep.htmIf my computer beeps and won't start, what do the beeps mean?
http://KB.IU.edu/data/afzy.html how to troubleshoot Beep Codes
http://pcsupport.about.com/od/nonworkingcomponent/HT/beepcodestb.htmPOSTAL Codes beep
http://www.technick.NET/public/code/cp_dpage.php?aiocp_dp=guide_beep_codesPower on Beep Codes post
http://www.pchell.com/hardware/beepcodes.shtmlIt can be so other check with the manufacturer of the system.
----------------------------------------------------------------------------
Are there any error messages? May be material.
Check with Support technique Gateway, their documentation and online drivers.
Gateway drivers and downloads
http://support.gateway.com/support/drivers/dlcenter.aspTechnical support Gateway
http://support.gateway.com/support/?cmpid=topNavDoor Documents
http://support.gateway.com/support/SUPINFO/index.asp?cmpid=topNavI hope this helps.
-
When I try to turn on all I get is a continuous beep I removed the ram which is fairly new on 6 or 7 months collapsed beep but screen white, re-installed the old RAM even problem. My most recent Ram replace.
Beep when the power is generated by the BIOS before Windows starts and so have nothing to do with Windows. You're more likely to find help at a forum dealing with equipment, for example http://www.tomshardware.com/forum/247100-31-continuous-bios-beep-booting
It could be as simple as a stuck keyboard, but see the manual of your motherboard for details on beep codes.
-
start up continuous beep and the cursor keeps blinking
my computer is continuous beep on startup for a few days now, and when it finished start keeps him from the flashing cursor, please any help
Hello EmekaYou may have a problem with your keyboard or your mouse.
Try each and connect it again and see if that fixes it. If your computer starts to make noises beeps at startup upward once again you will need to give your keyboard a thorough clean or replace.Hope this helpsMartin -
I have a problem with Windows 7 crashing on a regular basis,
The following error can be detected,
Signature of the problem:
Problem event name: BlueScreen
OS version: 6.1.7601.2.1.0.256.48
Locale ID: 2057
More information about the problem:
BCCode: 7a
BCP1: FFFFF6FC4004A5F8
BCP2: FFFFFFFFC000000E
BCP3: 0000000080AF4BE0
BCP4: FFFFF880094BF000
OS version: 6_1_7601
Service Pack: 1_0
Product: 256_1
Files helping to describe the problem:
C:\Windows\Minidump\051014-44772-01.dmp
C:\Users\Alun Davies\AppData\Local\Temp\WER-128997-0.sysdata.xml
I don't know if it's the same problem but on startup, I get the continuous beeps, who go to a level very low 30 seconds.
Any help will be appreciated
Thank you
Original title: failure of Windows
Hello
"beep" codes normally indicate a hardware problem / failure.
Go to your computer manufacturer's website and look at the specifications of your PC to see what BIOS you have
Then read this on the 'beep' error codes to try to see what failed:
http://www.computerhope.com/beep.htm
http://www.pchell.com/hardware/beepcodes.shtml
http://pcsupport.about.com/od/nonworkingcomponent/HT/beepcodestb.htm
If you are unable to determine the hardware problem yourself, contact the manufacturer if under warranty.
If it is not under warranty, find a good repair shop premises to take.
See you soon.
-
Toshiba M30 - random continuous beep
Hello!
I have a Toshiba M30 - 154.
In the last three days, I had a problem that repeats:
randomly when I'm working on the PC (applications/different conditions) the pc spekers do a continuous sound (like a beep...) and the only solution is to shut down the pc and reboot. Even more: if I try to stop with 'Turn-off' windows... «, the system hangs at the screen "closing Windows...» "and so the only solution is to press the button for a few seconds.
I am convinced that this is not a software problem...Any idea or suggestion?
Thank you!Stefano.
PS: Sorry for my English. I hope that you will understand me.
Hello
to be different if it is a hardware or software problem, you can use the XP System Restore tool. You need to remember when the sound appears for the first time and put the system to a restore point before appearing!
Try and keep us informed!
Theo
Maybe you are looking for
-
Upgrade memory of satellite P25S-507
I have a Toshiba Satellite P25S - 507 2.8 P4 FSB800 ghz with a set of chips intel 865pe. With pc-2100 memory. Can I use pc-3200 memory on this computer. Thank you
-
Call the function in LabView from a DLL, and then access the global variable of DLL
I've created a DLL in LabWindows with a function and structure. I want to call the function from LabView and then access the overall structure. I am able to call the function in the DLL with a "call library function node" and has access to the retu
-
I need all the features of the HP Scanjet 8200 to work with MS Windows 7. I am only able to get a simple swipe. Is there a driver that will result in the same complete functionality, that I had with XP, or am I forced to buy a new scanner? What is th
-
We have a unique system of Windows XP that run the software of engineering for certain calculations. All other systems running Windows 7, but what a XP system because it's the only thing that our calculations software runs on. CPU of the XP computer
-
Vista sp 2, pop up mlocker is disabled. Norton is disabled and the firewall is disabled, in her go and subject box shows the trombone, but When you open the e-mail message there is no trombone in the window.