contradiction between the delay and fetch file bmp

Hi all

I need to extract the BMP file in confirm.vi (pic2), but when I run the program, the BMP file will not come out correctly. the last picture always come out. (for example, the first photo has come out of time, but when image B should be out, he still see A photo.)

the correct picture will come out correctly when I put the delay of 100 ms in the loop. but it will cost you lost time, two arraies have 300 and 20 elements separately. How can I do it more quickly to get the correct image? Thank you!

Hi Yes,

It seems that you used too many loops to make your comparison function. Try to use Search 1 D Array.vi to eliminate inside while loop.

Tags: NI Software

Similar Questions

  • BlackBerry Smartphones to transfer files between the desktop and Blackberry

    I'm new to Blackberry and do research on how to transfer files Notepad or Wordpad from my office to the Blackberry.

    I am an old user of Palm, and there is a built-in function of memos of synchronization between the desktop and the handheld device.

    I'm not necessarily looking for to be able to automatically synchronize these memos.  Just having the ability to transfer them back and forth between the office and the Blackberry when there are updates.

    To my office, I use Outlook (with a FranklinCovey component software plug-in called PlanPlus for Outlook) on Windows XP Professional, sync to a Blackberry Curve.

    Thank you.

    Hi and welcome to the Forums!

    See this article for how to configure your BB to function as a home (or readers) USB drive on your PC:

    Hope that helps!

  • How to disable the sharing of files between the host and guest XP PRO?

    Hello my setup is:

    Host of XP PRO and XP PRO comments using NAT.

    How to disable file sharing between the host and guest (do not want to view or access the file share on host comments)?

    In the comments

    I tried to disable simple file sharing in folder options and uninstall

    File sharing and printing of LAN properties but can always see and have access to the

    Organizing actions of folder...

    Help please!

    Then you will need to disable "Microsoft File and Printer sharing" or you need to set restrictions with the GPO. As long as the systems have their default values the value of a Microsoft network allows to use actions.

    If you found this information useful, please consider awarding points to 'Correct' or 'Useful' answers and answers. Thank you!!

  • to fill the gaps with value of lead and the delay and make average and the gap between earned

    Thanks in advance

    I have table as below
    ID          TYPE     NUM     NAME     BEG_MP     END_MP     VALUE
    10001103N     3     1190001     WST     0.000     0.220     
    10001103N     3     1190002     WST     0.220     0.440     
    10001103N     3     1190003     WST     0.440     0.820     12800
    10001103N     3     1190003     WST     0.820     1.180     12800
    10001103N     3     1190004     WST     1.180     1.220     
    10001103N     3     1190004     WST     1.220     1.300     
    10001103N     3     1190005     WST     1.300     1.420     14800
    10001103N     3     1190005     WST     1.420     1.550     14800
    10001103N     3     1190006     WST     1.550     2.030     
    10001103N     3     1190006     WST     2.030     2.660     
    10001103N     3     1190007     WST     2.660     2.780     
    What I need is to fill the gaps with value of lead and the delay and make average and the gap between the values
    ID          TYPE     NUM     NAME     BEG_MP     END_MP     VALUE
    10001103N     3     1190001     WST     0.000     0.220     12800 ---> Lag value
    10001103N     3     1190002     WST     0.220     0.440     12800 ---> Lag Value
    10001103N     3     1190003     WST     0.440     0.820     12800
    10001103N     3     1190003     WST     0.820     1.180     12800
    10001103N     3     1190004     WST     1.180     1.220     13800 ---> Avg(12800,14800)
    10001103N     3     1190004     WST     1.220     1.300     13800 ---> Avg(12800,14800)
    10001103N     3     1190005     WST     1.300     1.420     14800
    10001103N     3     1190005     WST     1.420     1.550     14800
    10001103N     3     1190006     WST     1.550     2.030     14800 ---> Lead Value
    10001103N     3     1190006     WST     2.030     2.660     14800 ---> Lead Value
    10001103N     3     1190007     WST     2.660     2.780     14800 ---> Lead Value
    create table AVG_TABLE
    (
      ID     VARCHAR2(20),
      TYPE   NUMBER,
      NUM    NUMBER,
      NAME   VARCHAR2(10),
      VALUE  NUMBER,
      BEG_MP NUMBER(6,3),
      END_MP NUMBER(6,3)
    )
    ;
    
    insert into AVG_TABLE (ID, TYPE, NUM, NAME, VALUE, BEG_MP, END_MP)
    values ('10001103N', 3, 1190001, 'WST', null, 0, .22);
    insert into AVG_TABLE (ID, TYPE, NUM, NAME, VALUE, BEG_MP, END_MP)
    values ('10001103N', 3, 1190002, 'WST', null, .22, .44);
    insert into AVG_TABLE (ID, TYPE, NUM, NAME, VALUE, BEG_MP, END_MP)
    values ('10001103N', 3, 1190003, 'WST', 12800, .44, .82);
    insert into AVG_TABLE (ID, TYPE, NUM, NAME, VALUE, BEG_MP, END_MP)
    values ('10001103N', 3, 1190003, 'WST', 12800, .82, 1.18);
    insert into AVG_TABLE (ID, TYPE, NUM, NAME, VALUE, BEG_MP, END_MP)
    values ('10001103N', 3, 1190004, 'WST', null, 1.18, 1.22);
    insert into AVG_TABLE (ID, TYPE, NUM, NAME, VALUE, BEG_MP, END_MP)
    values ('10001103N', 3, 1190004, 'WST', null, 1.22, 1.3);
    insert into AVG_TABLE (ID, TYPE, NUM, NAME, VALUE, BEG_MP, END_MP)
    values ('10001103N', 3, 1190005, 'WST', 14800, 1.3, 1.42);
    insert into AVG_TABLE (ID, TYPE, NUM, NAME, VALUE, BEG_MP, END_MP)
    values ('10001103N', 3, 1190005, 'WST', 14800, 1.42, 1.55);
    insert into AVG_TABLE (ID, TYPE, NUM, NAME, VALUE, BEG_MP, END_MP)
    values ('10001103N', 3, 1190006, 'WST', null, 1.55, 2.03);
    insert into AVG_TABLE (ID, TYPE, NUM, NAME, VALUE, BEG_MP, END_MP)
    values ('10001103N', 3, 1190006, 'WST', null, 2.03, 2.66);
    insert into AVG_TABLE (ID, TYPE, NUM, NAME, VALUE, BEG_MP, END_MP)
    values ('10001103N', 3, 1190007, 'WST', null, 2.66, 2.78);
    commit;

    Hello

    Use LEAD and LAG when you know exactly how far is the target line (for example, if you know the desired value is on the next row).
    If you don't know exactly how far is the target line, then FIRST_VALUE and LAST_VALUE are more likely to be useful.

    WITH     got_neighbors     AS
    (
         SELECT     avg_table.*
         ,     LAST_VALUE (value IGNORE NULLS) OVER (ORDER BY beg_mp)          AS prev_value
         ,     LAST_VALUE (value IGNORE NULLS) OVER (ORDER BY beg_mp DESC)     AS next_value
         FROM     avg_table
    )
    SELECT       id, type, num, name, beg_mp, end_mp
    ,       COALESCE ( value
                 , ( NVL (prev_value, next_value)
                   + NVL (next_value, prev_value)
                   ) / 2
                 )     AS value
    FROM       got_neighbors
    ORDER BY  beg_mp to f
    ;
    

    Riedelme is correct: LAG LEAD (as well as FIRST_VALUE and LAST_VALUE) can return only the values that are there (or that you give as default values). This means that you can not solve this problem with these functions alone; you need something else (as NVL, above) to provide value when the function does not find it.

  • Printing problem with OE - 6 format since the upgrade to IE - 8: no space between the body and the subject line text.

    My computer is configured with XP SP3 and IE - 8. I've been using Outlook Express 6.0 (update of MS according to needs). Messages are always printed correctly. Lately, however, the body of the message printed directly below the object without line - the space between them. This happens on my Brother laser printer and my HP inkjet printer. I have not changed my settings of the printer. I've recently updated to IE - 7 to IE - 8; However, I see nothing in the settings of IE - 8 to explain this change in print. I recently installed "MobileMe" Panel Apple configuration, which has installed a separate set of folders in the list of folders in OE - 6. I did a clean (with Revo Uninstaller) uninstalling the MobileMe Control Panel, removed the extra e-mail account/folders and rebooted. Yet the printing problem.

    How to restore the space of line between the subject and the message body?

    Hello

    1. How is like print preview?
    2. don't you make changes to the footer settings?

    Method 1.
    If that doesn't help you can not save the file wmp.dll
    a. log on as an administrator.
    b. Click Start, type cmd.exe in the Run dialog box right click on cmd.exe, click Run as administrator and then click on continue.
    c. at the command prompt, type regsvr32 oled32.dll and press enter and then click OK.

    Method 2.
    If this problem started occurring recently, you can restore the computer to a previous state. You lose Internet Explorer 8 and return to Internet Explorer 7. In this way, we can check whether or not the root cause of the problem is installation of Internet Explorer 8.
    Reference:
    How to restore Windows XP to a previous state
    http://support.Microsoft.com/kb/306084

    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • What is the difference between the stop and restart?

    What is the difference between the stop and restart?  I feel that stopping closed all processes, completely erases RAM memory and clears the cache of the processor.  I need to know if 1) this is a correct assumption and 2) which is better for daily maintenance of the system.  Thank you in advance.

    Hello Jeremy_1976,

    Your support when the judgment is correct. Basically, it stops the process and completely turns off your computer. Reboot, however, temporarily your PC stops, then turn it on again. This happens usually when Windows updates are installed. After installation, the system is restarted (rebooted) so that any update has been successfully installed and works as it should. You can be a little mixed upward the reboot and the hibernation. Reboot is, as I have indicated previously, basically a reboot of your machine. Ultimately, your PC is on again after a reboot. However, hibernation, stores all data currently in memory in a special file, then the PC turns off. When you then turn on your PC, that is, coming out of hibernation, hibernation files is used to restore the status of the PC than when you initially put into hibernation. In other words all the programs you had open before will automatically open and be ready to use hibernation.

    Hibernation or sleep for that matter is for short-term use. It is normal in Hibernate, or sleep if you want to be away from your PC for half an hour or so. If you leave more than I suggest you stop completely.

    A point to remember about hibernation is that, if you use put into hibernation, you can't, once you get out after hibernation, install programs or updates. You have to stop and restart normally to do.

    This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

    John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk |  vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

  • Unknown device on network adapter between the laptop and the wireless router

    I am running windows 7 64 bit on a laptop computer connected wireless to the router and internet.  The router is Linksys WRT160N connected to the internet.  The map of the network, there is a question mark device unknown between the laptop and the router.  However, I still have access to the internet.  In terms of network, if I hover over the laptop, it does not show an IP address.  It only shows the name of the computer and its MAC address.  Any help would be appreciated.

    Solved my problem.  I checked the button of the IPv6 protocol in the properties of a network connection on the laptop, and now I can see it's the IP address and the unknown device has been replaced by a switch and hub which is part of the router.   I do not uncheck the button IPV4.  I'm guessing that it is a bug in Windows 7 that you need to cut of ipV6 Protocol when you have a Win XP computer on the network if you want to see a map of own network.  As I said before, everything worked before, so this seems to be a cosmetic fix only.  I see that my shared files on the XP computer appear faster after a reboot.

  • How can I remove the black space between the title and the main section of the screen?

    Hello

    I'm a black space between the title and the main screen. I don't want this space.

    How can I remove this space?

    Please help as soon as possible?

    http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800505/800508/...

  • Relationship between the list and ListField...

    Hey people of Java...

    I can't thank you enough for your answers because I'm really starting to "grok" the paradigm of Java.

    Another came today I'm having problems understanding I deconstruct this app MemoryDemo...

    In the screen of the demo is these two lines:

    Get and display the list of customers.
    _customerList = CustomerList.getInstance ();
    _customerListField = new MyListField (_customerList.getNumCustomerRecords ());

    Well, now I understand the first line perfectly. She develops an object with the contents of the customers it contains.

    The second line calls a custom ListField routine that I show below:

    the final private class MyListField extends ListField
    {
    public MyListField (int numEntries)
    {
    Super (numEntries);
    }

    }

    Here is the part that I don't understand:

    It seems to appeal to both the MyListField() and the super() is simply the NUMBER of elements required, but not * that * list to use.  Exactly how is MyListField() or super() knows how to use the list of customers?  I ask because this exact routine is used a few lines more later (in the part of the main screen) to do the same thing for a list of the records of the order - even once without any reference to which list to use.

    It doesn't seem to be an explicit connection or the relationship between the _customerList and ListField is building.  Is somehow deconstruct '_customerList.getNumCustomerRecords ()' to its root and use _customerList somehow?  I don't think that I changed the call to this:

    _customerListField = new MyListField (_customerList.getNumCustomerRecords ());
    _customerListField = new MyListField (PICK_A_NUMBER);

    Where the constant is: public private static final int PICK_A_NUMBER = 50;

    And he ALWAYS displays a list of customers (though now with only 50 files).  How to do know?

    Thanks in advance!

    -John

    "I guess that somewhere in the interior architecture of the ListField, he knows that he has to paint the whole - one at a time - when put on the screen - that's it."

    Fix.

    This is the great thing about ListField.  It attracts only those who are on the screen.  If you use ListField draw a list of 10,000 rows (I tested), and it will only extract and draw the 10 that he needs.

    "Again, I don't find any explicit loop where it is through each element and then calling drawListRow()."

    Good yet once, it is not there.

    "Maybe one day I'll be able to pay it back here."

    It would be great.

  • Connection between the monitor and the Studio 1458 laptop seems broken

    After happily using my Dell Studio 1458 for a little over a year, all of a sudden my laptop screen went completely blank (not black, but a sort of grey empty) when I started yesterday. I have reset several times, I let it run and I heard the sounds of standard Windows startup. Since I assumed the laptop worked again very well, and I plugged an external monitor. I am now using the laptop with this external monitor and everything except the monitor to the laptop works very well.

    I can still go to "change screen resolution" and see the laptop screen correctly detected by Windows. I can turn it on by selecting "extend these screens. I can also change the screen resolution on the laptop screen. It's the same kind of gray white whatever I do. Of all this I conclude, there is nothing wrong with the drivers: the more likely culprit seems to be the link between the laptop and the screen of the laptop. Unfortunately I ran out of warranty three weeks ago so I don't know what are my options here. I started to disassemble the laptop to see if maybe I could plug a cable loose once more, but I got cold feet at halfway when I remembered that I had saved not properly all my files.

    Any ideas on how should I proceed?

    Thank you

    Johannes

    This would mean it's time to start trying new parts - cable first.  If that does nothing, try a new inverter (if the screen is CCFL).  If it's backlit by LEDS, try a new screen.

  • What is the difference between the 9500 and the 9530 smart blackBerry STORM phones?

    I was wondering just what was the difference between the 9500 and 9530 STORM?  I have a 9530. But isn't sure if the 9500, apps, etc. are compatible with the 9530.

    Tell you the OS flow, okay.

    No, the OS files are specific to the models and every OS file begins with the model number, it is destined.

  • VMWare Player 6 - copy / paste doesn't work is not between the guest and host

    Hi all

    I am unable to cut and paste (text) or drag-and - drop (files) between the client and host and vice versa.

    I am running Windows 7 (32-bit) guest on a host Windows 8.1 (64-bit).

    Everything else works to date works and VMWare Tools are installed.

    I spent a few hours searching and have not been able to determine if this is a known issue or just a mismatch in my environment/configuration.

    Any suggestions or comments would be most welcome.

    Kind regards

    Hoops

    Hi all

    Seems I solved the problem.  It comes down to User Account Control (UAC) prompt (in my case Windows 7 (32 bit).  I have disabled UAC in the comments and drag and drop / cut and paste now works like a charm.

    Autologin also now works. I had not tried to set up that more early.  That's where I read an article to disable UAC for AutoLogin work.

    My VMWare tools icon now displays in the system tray.

    I hope this helps someone else out there!

    Thank you...

    Hoops

  • Workstation 9 - slow network performance between the host and guest

    I am running windows 8 on the host and installed by 9 trial. Then installed windows 8.1 as a comment system.

    I'm a slow, very slow network between the two.

    If I send files to and from the computer with another guest, transfers are normal, but if I try the same files between the host and the guest, they are really slow.

    I use a bridge connection.

    I read elseware to disable the following on the guest card:

    Large Send Offload v2 (IPv4)

    Large Send Offload v2 (IPv6)

    But that did not help.

    Thoughts?

    Maybe then try Hyper-v, it help you better.

    report this incident to Vmware if you can

    Concerning

  • Disable communication between the host and the virtual machine

    I have VM Server 2.0 and one of the virtual machines has the same name as the server and even if the virtual computer is connected to the host only network it generates the Windows error message: duplicate names exist on the network.

    is there a way to disable communication between the host and the virtual machines? I just need a virtual network that is isolated from my network complete and host also.

    Thank you.

    The GUI Server2 is not to choose the other unused vmnets.  Then edit your file VMX use a different vmnet of 0, 1 or 8.  (which are bridged, host-only and NAT)

    Thus, for example, if your VMX has a line that says:

    Ethernet0.VNET = "VMNet0.

    change to:

    Ethernet0.VNET = "VMNet2.

    (This assumes that you have not used the network Editor to fill the vmnet2 either).

  • keyboard shortcut to switch between the background and outline in flash?

    It becomes tedious to have to scroll over the swap icon to switch between the background and outline. I'm on a macbook pro and had no chance of finding a shortcut or hotkey for it.  This would make my work flow a lot faster if there was a.  If anyone knows a shortcut, please hit me with it. It would be greatly helpful!

    -Steven

    To do this use jsfl:

    setStrokeColor.jsfl:

    fl.getDocumentDOM () .setFillColor (document.getCustomFill("toolbar").color);

    setFillColor.jsfl:

    fl.getDocumentDOM () .setFillColor (document.getCustomFill("toolbar").color);

    Link these jsfl files in your commands menu and assign shortcuts to them.

    To locate the folder where these commands on your machine/OS google: "Flash orders location JSFL.

Maybe you are looking for