Control external synth MIDI via USB keyboard controller

Friends,

I'm trying to get a Novation Launchkey 25 to work as an external controller for mother-32 MOOG synthesizer.

Software - Logic Pro 9

USB - LaunchKey 25 Novation keyboard controller

Interface - Focusrite Scarlett 18I6

MacBook pro with current operating system

Currently I have the out of the Focusrite and towards the MOOG MIDI cable. The Launchkey is connected via USB on my Mac. Logic can see the keyboard and interface, but not the MOOG. I just want to control the MOOG mother 32 with the keys. I am at a loss on how to implement the logic. Any help would be greatly appreciated.

Thank you

Steve

1 MIDI OUT of the Focusrite at noon on the MOOG.

2. create an external MIDI track with the release (in the Inspector) on the MIDI OUTPUT Focusrite. Also assign the desired MIDI (or ALL) channel. Better, the use of the channel the MOOG is set up to receive on.

3 connect the headphones to the MOOG, to see if it is audio output. To get the audio MOOG through logic, you should run the audio Moog in the Scarlett outputs, create an Audio track, the value of channel inputs inputs use the MOOG, the value Preferences / Audio monitoring software allowed to logic. Allow recording the audio track. You can select two tracks (Audio and MIDI external) using shift/select, if necessary. Audio will come from Scarlett.

It is another way to analyze using a plugin, get that first day.

Tags: Professional Applications

Similar Questions

  • Satellite U300 - only the external mouse works via USB

    My touchpad has stopped working. I tried to reload the driver, reset the settings via the control panel and checked the Fn F10 button. My external mouse works via USB and I have not activated the button ' disable when the external mouse connected "(and even when the mouse is disconnected the touchpad still does not work).

    Any help would be appreciated. I don't know that I missed something very simple.

    Hey Buddy,

    > checked the button Fn F10
    It is the combination of bad for touchpad keys. You must press the combination of keys FN + F9 to toggle the touchpad.

    Check this box!

  • Boot from an external HARD drive via USB

    I have an 8200 Elite SFF and wants to start an alternative system (not Linux, but * NIX - like BONE) of a disk external DRIVE, connected via a USB port. My main operating system is WIN 7 64 bit, but for some special tasks I´d like to use the alternative OS. It worked without any problem on my two previous stand-alone - elected USB as a boot device in the BIOS boot menu and it starts fine.  However, on my Compaq 8200 there no USB option in the start menu. However, when I connect the external HARD drive to a USB port, the name of the HARD disk appears in the start menu, but again, it won't start him.  Have heard that there is a tweak to fix this, or maybe I m wrong. Alternatively, my stand-alone motherboard just can´t boot from an external hard drive via USB? Any ideas?

    Yes,

    Unplug everything plugged to the computer except the keyboard, mouse and monitor.

    Then use this method to Flash the BIOS.  It's the best way to go.

    USB Device Flash BIOS DOS

    BACK Flash (DOSFlash.exe, FlshUefi.cpu) is the Flash BIOS DOS compatible system utility that can be used from a bootable BACK storage device (where the 'BACK' refers to a number of operating systems such as FreeDOS, DR - DOS or MS-DOS). FlshUefi.cpu is the driver required for DOSFlash.exe. To Flash the BIOS of the system to a bootable USB storage device, you'll need to copy the contents of the BACK Flash file on the USB device, start the PC from the USB device and run the DOSFlash application. To see a more complete description of the BACK flash utility, view DOSFlash.txt located in the folder BACK Flash. This folder also contains the required binary BIOS image.  The binary image file is named xxx_MMmm.bin , where "xxx" is the family of BIOS, 'MM' is the major version number and "mm" is the minor version number.  This file can be copied to the root directory of any removable media USB for use with F10 setup option «Flash system ROM»

    The display of the folder BACK Flash content

    The links on this post do not work. I copied the section from the BIOS flashing instructions for the specific section you need.

    Paul

  • When you use Roland FC300 footswitch to control the transport, all the USB keyboard midi notes do not reach the logic. No help available on this?

    When you use Roland FC300 footswitch to control transport LOGIC, all midi keyboard USB (UMA25s) notes do not reach the logic.

    They are visible using MIDI Monitor s/w so reach the OS X - but do not make SENSE.

    I tried the function of the environment of the logic and the double check OS X Midi Setup but no difference statistically.

    I would appreciate any help on how to proceed.

    Thank you

    Paddy

    I do not understand your post. Your use the FC300 to control logic - how is it connected?   Is it plugged into the keyboard via middle or did you connect to logic directly via a midi interface?  (sense are the keyboard and the FC300 connected independently.

    When you say midi notes reached illogical (those transmitted by the FC300 or those via the USB keyboard do you mean?).

    First thing to do is to circumvent the control surfaces to exclude...

    Then, the control screen the custom value and see if data midi reached logical... If his hitting the midi monitor 99.9% sure it is hitting logic.

  • drive external hard connected via usb hub powered Time Capsule guard fall...

    Hello.

    Try using a player external 3.5 "connected via USB hub powered to my Time Capsule to serve as a backup Time Machine secondary.

    When I connect the external hard drive, it turns out, and everything seems good (Yes it is correctly formatted). I see the external hard drive in my time machine preferences panel and also the desktop browser window, etc..

    After selecting the drive hard as the second backup TM, I start TM. After a few minutes the backup fruitbodies. Audit of airport utility, the drive no longer appears in the profile of Time Capsule. I can't turn back the drive without unplugging / plugging the USB cord. I went to HD (WD green 4to) and HGST 4to - deleted both.

    What is the speaker (the box is powered)? Can you have a USB hub between the external hard drive and time capsuls? Something else?

    Just seems like something somewhere that expire, causing it to drop the connection...

    Thanks for your useful suggestions to fix this!

    Is your TC the Gen5, model AC?

    I must say that your experience is not uncommon. I tested it myself recently and was disappointed in how the poor reliability has been... Although not as bad as yours... in fact cutting in a few minutes to start a backup is ridiculous.

    What is the speaker (the box is powered)?

    Quality of the envelope varies a lot... What is it??

    If this is the typical brand X... Plug it into your Mac. is it reliable?

    Go to your control panel and dig up the actual USB chip used... I don't know if we can help on type a lot. But it helps us determine the fleas are a problem.

    I found the hard drive in the finder to mount helped... not the sparsebundle that must be mounted by Time Machine... but the disk must be mounted in the finder so that you can copy files back to him.

    I start TM. After a few minutes the backup fruitbodies.

    Check in the finder, it has created the sparsebundle and works.

    Can you have a USB hub between the external hard drive and time capsuls?

    It's our usual recommendation... but he won't always help... especially if the USB hub is another brand X...

    Note that all societies are changing USB tokens at the drop of a hat... some seller of a rival company arrives and offers them 1 c off the coast of 1 million chips it is common to spend even in the middle of a race. Even the tenors have no satisfactory fixed hardware...

    The computer has loads of memory... and may contain drivers for hundreds of different USB tokens... but the TC is a very limited amount of space and with questions if the driver is not fair.

    I started a thread for a database just now... has not progressed much.

    https://discussions.Apple.com/thread/5912861?TSTART=0

  • I get this error message: Service Control Manager: The Genesys Logic USB Scanner controller NT 5.0 service failed to start due to the following error: the system cannot find the specified file.

    I get this error message (consistantly about every hour or so) and the computer crashes.  I suspect that it is looking for a file, but I can't find where the USP Scanner controller NT 5.0 would be installed.  Could it be part of the HP 6500 has Officet more pilots?  Thanks for any help!

    Hello John Wirkkala,.

    How long have you had this problem?  You still have the disk that came with your HP Officejet?  If this isn't the case, I've included the link below for the drivers and installation.  You have any other devices synchronize you with your computer via USB?

    If either reinstalling the device or updating the drivers is not a workaround, see the event viewer for the error log.  Please let us know status.

    Downloads of software & driver - HP Officejet 6500 a Plus

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=228&LC=en&cc=us&DLC=en&sw_lang=&product=4083977#N295

    Event Viewer: how view and manage events records same observer in Windows XP
    http://support.Microsoft.com/kb/308427

  • Drive external hard connected via USB hub: icons not showing on desktop

    Hi... on an iMac 2015, using a USB hub 3.0 occasionally to connect an external hard drive (which stores these things as art assets)... but the external hard drive icon does not appear on the desktop... it IS in the sidebar of Finder, though...

    But on the icon the Finder sidebar, the small icon "eject" gray is missing, and the only way to eject is to right click and select "eject" or use the eject button in the Finder toolbar... it's okay...

    But is there a way to display the icon on the desktop, so I can always remember to eject the disks attached?

    (the desktop icon shows normally when connected directly via the USB ports at the rear)

    Thank you.

    Finder-> Preferences-> general, check the appropriate boxes under "show these items on the desktop".

    [My personal choice is them having all checked]

  • XP hangs after connecting an external hard drive via USB port

    When I connect an external hard drive of 250GB via a USB port on my system XP - SP3, the computer crashes immediately after the sound signal from the recognition of a normal connection PnP. There is no assignment of the station. I don't know that he had worked as can be expected before. A new 500 GB external hard drive is recognized as new hardware, the driver installed and ready to use, but after that, the PC shuts down completely new. However, when I do a system startup after connection of the same two drives, everything looks OK. Also, no problem with a USB stick of 2 GB. How to find what's the problem?

    Well - it's Windows for you, sometimes. :/

    Good luck with your new installation!

  • I can control external (AS3) SWF via Javascript behaviour?

    I intend to build a web page where the external buttons using javascript as it orders < a onClick = "javascript:LoadSWF (1)... > < img... > and their code would be load an object parent SWF (embedded in the html code) to load the desired child of SWF interactive (and replace a previous child SWF) it contains, where the user can then play with him."

    However, my question is, can an embedded SWF object will receive external instructions from javascript code? If so, how?

    Yes. Use the externalinterface class.

  • Reformat using an external CD-ROM with usb connection

    Try to reformat my old laptop but my cd rom is broken when I try to do with an external cd drive via usb, the computer does not see the external cd drive

    Hi eeeLW,

    ·         Other not detected USB devices?

    Check if the drive is detected in Windows Explorer. To check if the drive is recognized by Windows, you will need to click Start, click my computer. Check if you can see the drive.

    Method 1: Make sure that the drive is detected in the BIOS (basic system Input\Output). Refer to the manual or visit the support Web site to do this. Connect the drive to a different USB port and check if it helps.

    Method 2: Run this utility of automated troubleshooting and see if it makes a difference.

  • Inspiron 15R (5537) wake from its slumber when the lid is closed through the usb keyboard/mouse

    I have an Inspiron 15R (5537) which has all the latest drivers from Dell BIOS A01 Reference (Windows 8). I have the options of closing the lid set to "do nothing" for the two battery and plugged in, but no matter what I try, when the lid is closed I can't the laptop to wake up via USB keyboard or mouse.
    The keyboard and mouse have the wake-up option enabled in the settings of their material.  I also wake up from USB enabled in the BIOS.
    What is interesting, is that if I put the computer to sleep with the lid open, I can wake him up from the keyboard or the mouse.  But with the lid closed, the only way to wake up, it should open the cover and press the power button.
    Anyone know a solution to this?
    Summary:
    Cover open: CAN wake from USB keyboard/mouse.
    Cover closed: don't wake up if I open the lid and press the power button.

    Pete,

    Depending on where you live, you will have the rights of consumers.  I live in Australia and we have pretty good consumer protection.

    I asked Dell - repair, replace it with one that works, or pay back me.

    They went away for a few weeks, and when I "called home" a few times, they acknowledged that they could not solve the problem and offered me a full refund. The laptop was picked up yesterday and I expect the refund within about five days. The guy on my "case" has been very professional!

    I guess that you informed Dell FORMALLY of the problem via a support ticket?

    I did that and followed by chat and phone calls.

    Whist, the ability to wake up via USB is not explicitly described in any of their literature, the bios has available and W8.1 has the facility.  they built it all - EXCEPT that they forgot the lid...

    see you soon

  • SSD external via USB does not start by default

    Hello Apple community.

    I have a problem with my new external SSD. Given that the base model Mac Mini end of 2014 comes with a disk HARD 5400 RPM drive, I wanted to go to an SSD without having to tear the whole unit. I wanted to exhaust the option 'boot from USB' and I'm having a strange problem. I cloned my Mac to the new drive SSD and slapped in a box set of the speaker. I connected via USB and changed my 'startup disk' to use the external SSD drive. However, it does not start on this unit automatically. When I reboot and discovers the "boot manager" I see the USB being initialized automatically. After disconnection / re - plug the drive in, it appears as a boot option. Once it is initialized, everything works fine and I can boot into El Capitan without any problem using the SSD.

    I am trying to find a way that I can get the Mac to initialize the SSD to the boot upward and choose default. I don't want to have to re - connect the drive whenever I want to start on the SSD drive... Any help and suggestions are greatly appreciated!

    My equipment

    ===========================

    Model Base of Mac Mini (end of 2014)

    1.4 GHz Intel Core i5

    4 GB of DDR3 1600 Mhz

    OS X - El Capitan v 10.11.3

    240 GB SanDisk SSD more - connected via USB3.0

    What unit do you use for the SSD?

    Can you provide a link?

    If the SSD is delivered with a box to provide a link to that,

    How do clone you for the SSD? What app did you use?

    -Try to reset memory NVRAM/PRAM and SMC

    MacIntel: Reset of the controller (SMC) system management

    Subject of memory NVRAM and PRAM

    -Try to start safe mode

    OS x: what is Safe Boot, Safe Mode?

    -Start to recovery and repair the startup disk

    OS X: on OS X Recovery - Apple Support

    -If it is repairable, reinstall the OSX. Nothing shall be lost

    How to reinstall OS X on your Mac - Apple Support

    -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

    Format the boot disk and then do a fresh install of Mac OS x

  • Qosmio G50 - 12 q - Vista does not load after you connect the external USB keyboard

    I could acquire an enermax acrilux usb keyboard and have connected the keyboard taken 12 q at the same level where another keyboard was attacked the qosmio g50 usb and it worked without problem.

    After to start the PC with keyboard eneramx connected the qosmio has not loaded windows vista Ultimate edition and the inside wheels have been activated.
    Never happened before. I doubted the enermax

    Reconnected to the position of the qosmio USB, there on the back not granted to start-up of turbines problems
    As the enermax, that he has never blocked the startup of the operating system and to activate turbines also have plugged into the same USB port to which priority was connected a keyboard?

    Tank you

    Hi mate

    Sorry, but you message I am really hard to understand
    What I understand is that you connected an external keyboard on the Qosmio and now the laptop will not boot properly. Is this good?

    What to say; Maybe you disable USB legacy mode in the BIOS.
    Please check this!
    To enter the BIOS press F2 and everything by turning on the laptop.

  • the installation files that are necessary to control a 33210 agilent has via USB

    Hello

    I'm trying to control agilent 33210 via USB to a produce an arbitrary waveform using labview. The installation files I need? Obviously labview 86, ivi specific driver for 33210a, and? After you install labview 86, the program prompted me to install pack pilot devices, which I did, but he asked for disk 3 that does not exist in the package, I downloaded on ni.com.

    BTW, is there a guide on where to go from there? I'm more c/matlab programming and graphic...

    Thank you very much

    Hi User2009,

    Once you have installed LabVIEW and NI-VISA, you can do the rest of LabVIEW.

    The simplest process is:

    1. Go to tools' Instrumentation' find instrument Driver and to use the finder driver tool to download and install the appropriate driver (I recommend getting the pilot LabVIEW Plug - and - Play project).
    2. "Once you have installed the driver open the example finder and navigate to hardware input and output" Drivers of instruments ' LabVIEW Plug and Play and find an appropriate example.
    3. Select your device and run the example to make the work of communication course.
    4. Use the example as a starting point and make any changes you need.

    I got to have an Agilent 33120 at my office, so I recorded a quick video for you to the process described above.  I use GPIB, but the process must be the same for USB.

  • When I try to copy a single file (for example: size of 1 GB) drive hard to any what external memory device via the USB port, the copy process takes several hours to complete

    I use a DELL Studio 15 laptop computer. When I try to copy a single file (for example: size of 1 GB) hard drive to any external memory device (for example: USB key or external hard drive) via the port USB, the copy process takes several hours to complete. I have checked the viruses using McAfee Antivirus, but could not find. Can someone suggest me a solution?

    Hello

    ·          Were there any changes made to your computer before this problem?

    Step 1: Format the external device to the NTFS format and check if the problem persists.

    See: http://windows.microsoft.com/en-US/windows-vista/Convert-a-hard-disk-or-partition-to-NTFS-format

Maybe you are looking for

  • Satellite Pro U500-10N drivers and utilities Toshiba Windows 7

    Windows 7 has been on the market for at least a year. And I can't believe it, there are only * 4 * drivers to download to a Windows System 7 x 32 bit (for 64-bit system there is * 145 *). When you install this system on U500 some drivers and almost a

  • F10-132: TV Tuner recognized do not more MCE

    Hi all When I started using the F10 with MCE, there is no problem to use the media center to watch TV After downloading windows updates, the media center could no longer recognize the TV tuner. I downloaded the latest driver for TV tuner for my F10 a

  • Can I run the Mavericks and Snow Leopard on my MacBook?

    I have a mid-2009 MacBookPro (4 GB of RAM, 2.26 GHz) running Mavericks 10.9.5. I wish I never upgraded to Snow Leopard and was planning go back from iTunes (12.3.1) is now unable to find my library when I copied the files to my Time Capsule to a new

  • External monitor adapter does not

    Hello I recently encountered a problem with my external monitor adapter. It worked very well until all monitors I put seeing flashes and the screen goes black. I tried to make all combinations of display configuration but the screen is still blank. W

  • Users missing option

    HII after update my motoe 1st generation in lollipop. Missing users which is present in MotoGP or motoe 2nd generation