Control/indicator in the case of error?

Similar Questions

• structure of the event within the structure of the case? error or limitation of LabVIEW?

  Hello

  I am trying to reach a structure of the event within a box structure. The event is triggered by a mouse event (mouse down, move to the top).

  This vi tries to simulate behaviour of the device with a sensor, so the mouse triggered the structure of the event, won't be there in real working environment, so I can't remove the structure of the case.

  But as I noticed that if I try to click on the drawing (that my mouse events are triggered with) before activating the Boolean condition of 2D, I can access is no longer the component front (button, leads, etc.).

  They seems to be frozen. But if the case is true before you try click on the 2D drawing area, everything seems to work well.

  Is - this protected by a kind of LabVIEW bug or there is a limitation?

  These are my screws.

  Thank you

  

  Hello Nefertari,

  Use a Standard Architecture.

  I changed the code. I hope now that its fine.

  Please find the code updated the joint.

  LV 2012.

  Kind regards

  Leila

• Development of control before entering the case

  In adjoining VI I want to boot the SP value to zero for a few seconds when the transition of 1,2,3 and 4 cases 0 (manual set point), in fact, is not not necessary to initialize when it goes from 1 to 0 cases (the value is set to zero cases 1), but if this bit of redundancy makes it easier case I'm ok with that.

  In the future, MS will be output sent to the hardware and RO will be a voltage read from hardware.

  Techniques suggested appreciated.

  THX

  Well, common sense would be to implement a correct state machine that is aware of all transitions.

  In a simple case like this, you could just do something like the amendment attached.

  (Note that I took the liberty to simplify a number of things: why do you need so many constant diagram with the same value?) Don't be afraid to branch the wire and use only one of each. Even easier would be to combine any non-null in one. property nodes are relatively expensive, so only use if entry has really changed and not more and more. Instead of the value property, use local variables. Much more effective! So you write to RO with each iteration, which belongs according to the structure of the case. No need to value properties or local variables at all, right?

  I think that the pile of case structure could be further simplified, but this should help you get started. Good luck!)

• NAC 4.8 adding to the case because of the cam

  Hi all

  I threw a half because of the NAC installation and this is my first deployment of the NAC, I feel a little overwhelmed.

  I read the installation guide for the devices from the back to the front, but I have a problem after the addition of a case to the cam.

  I am able to add the case to the cam successfully, but almost immediately, the case and the cam can no longer ping between them in the cli.

  the States of event logs that the heap in connected to the cam, but newspapers then an error that the cam is unable to push the registration to the CAs. from this point, I get several questions of event log indicating that the case is out of sync

  I copied a part of the nac_manager.log which show the connection process:

  2012-03-09 22:33:06.037 + 1100 [TP-Processor24] INFO com.perfigo.wlan.web.admin.SecureSmartServer - SSS - connect: get the new connectorClient of 10.0.0.100

  2012-03-09 22:33:36.433 + 1100 [TP-Processor24] INFO com.perfigo.wlan.web.admin.SecureSmartManager - SSM - addSecureSmartServer: sleep for 2 seconds to click to restart

  2012-03-09 22:33:38.434 + 1100 [TP-Processor24] INFO com.perfigo.wlan.web.admin.SecureSmartManager - SSM - addSecureSmartServer: sleep for 2 seconds to click to restart

  2012-03-09 22:33:40.436 + 1100 [TP-Processor24] INFO com.perfigo.wlan.web.admin.SecureSmartManager - SSM - addSecureSmartServer: sleep for 2 seconds to click to restart

  2012-03-09 22:33:42.438 + 1100 [TP-Processor24] INFO com.perfigo.wlan.web.admin.SecureSmartManager - SSM - addSecureSmartServer: click on the STOPPED state

  2012-03-09 22:33:42.617 + 1100 WARN [TP-Processor24] com.perfigo.wlan.web.admin.SecureSmartPublisher - NAC Server 10.0.0.100 is out-of-sync.

  2012-03-09 22:33:42.702 + 1100 [TP-Processor24] ERROR com.perfigo.wlan.web.admin.FilePublisher - FilePublisher - writing: setPath failed...

  2012-03-09 22:33:42.793 + 1100 [TP-Processor24] ERROR com.perfigo.wlan.web.admin.FilePublisher - FilePublisher - writing: setPath failed...

  2012-03-09 22:33:42.833 + 1100 [TP-Processor24] ERROR com.perfigo.wlan.web.admin.SecureSmartPublisher - SSM publishAccess: impossible to publish the comments sign-up page

  2012-03-09 22:33:42.872 + 1100 [TP-Processor24] com.perfigo.wlan.jmx.admin.FileUtil - FileUtil - readFile INFO: /perfigo/control/conf/os-detection.fp

  2012-03-09 22:33:42.887 + 1100 [TP-Processor24] ERROR com.perfigo.wlan.web.admin.AccessConf - cannot activate ETH1 on 10.0.0.100

  2012-03-09 22:33:42.888 + 1100 [TP-Processor24] ERROR c.perfigo.wlan.web.admin.AdminIpAccessInfoManager - AIAIM - publishAccess: failure

  2012-03-09 22:33:42.888 + 1100 [TP-Processor24] INFO com.perfigo.wlan.web.admin.ServerConf - SC - stopOobSWissServer()

  2012-03-09 22:33:42.905 + 1100 [TP-Processor24] INFO com.perfigo.wlan.web.admin.SecureSmartManager - 10.0.0.100 added to Clean Access Manager

  2012-03-09 22:33:46.922 + 1100 [pool-1-thread-1] ERROR com.perfigo.wlan.web.admin.ConnectorClient - Exception of Communication: can't connect with the exception of server access own creation connection to: 10.0.0.100. nested exception is:

  java.net.SocketTimeoutException: connect timed out

  2012-03-09 22:33:46.922 + com.perfigo.wlan.web.admin.SecureSmartPublisher - SSP - connectAndPublish 1100 [pool-1-thread-1] ERROR: could not connect to 10.0.0.100

  2012-03-09 22:34:01.614 + 1100 [pool-1-wire-2] ERROR com.perfigo.wlan.web.admin.ConnectorClient - Exception of Communication: can't connect with the exception of server access own creation connection to: 10.0.0.100. nested exception is:

  java.net.SocketTimeoutException: connect timed out

  2012-03-09 22:34:01.615 + com.perfigo.wlan.web.admin.SecureSmartPublisher - SSP - connectAndPublish 1100 [pool-1-wire-2] ERROR: could not connect to 10.0.0.100

  2012 03-09 22:34:01.627 + 1100 [pool-1-wire-2] WARN com.perfigo.wlan.web.admin.SecureSmartPublisher - NAC Server 10.0.0.100 is out-of-sync.

  2012-03-09 22:34:05.628 + 1100 [TP-Processor19] com.perfigo.wlan.web.admin.ConnectorClient - Exception of Communication ERROR: could not connect with the exception of server access own creation connection to: 10.0.0.100. nested exception is:

  java.net.SocketTimeoutException: connect timed out

  2012-03-09 22:34:20.618 + 1100 [pool-1-wire-3] ERROR com.perfigo.wlan.web.admin.ConnectorClient - Exception of Communication: can't connect with the exception of server access own creation connection to: 10.0.0.100. nested exception is:

  java.net.SocketTimeoutException: connect timed out

  I've followed all of the installation guides recommendation of the disconnection of the interface untrust on the CASE and there is no HA configuration currently...

  What I don't understand is the inability of webcams and cases of ping each other, but they can ping other devices on the network. The SCA and the cam are in different VLANS.

  Any assistant to a guru of the NAC would be greatly appreciated.

  Thank you

  JS

  Thanks a lot Man, saved you my day

• Could not create constants/controls/indicators from the XML parser

  Is there a reason I can't create a constant/control/indicator of the XML parser function ref (by right clicking)? I need to make the Subvi in build/read xml files, and it's really impossible without this ability.

  LabVIEW 2012 f3

  This bug has already been reported (CAR 357092) and should be corrected in the next service pack release. For now, here is a workaround:

  "" "" "1. create an indicator of reference from functions ' programming ' file IO" XML "XML parser" New.vi.
  2. right click on the new terminal of indicator 'DOM Document Out' and select Create > command (or indicator).

  3. right click on the new indicator of control / and choose Select XML Parser Class. Then you can choose what class you need.

• Enum (type def) - structure of the case called update error

  Hello

  1. One of my (type def) enums is not updated the names of structure cases. I found something that looks like a probable error in the case where the structure,
  2. I had created one of the constants in the enumeration before I did a typedef. Therefore, I made new constants since the typedef and replace the original ones. and still, the structure of the case is not being updated.

  How can I solve this?

  also, I have one state machine inside the other. Is this right way to program?

  

  Somewhere in your code, you have the wrong typedef, or don't replace a control by the typedef. Must not have replaced all. I don't know if there is an easy way to search for; You may need to go through anyway.

• When I tried to back up my files, I got an error (0 x 80070013) indicating that the media is write-protected

  When I tried to back up my files, I got an error (0 x 80070013) indicating that the media is write-protected. How can I solve this problem? Thank you for your time, Shawn

  You may not have the correct permissions or own the medium on which you try to perform the backup.  Here are some instructions on how to give you the right permissions and Take Ownership (if necessary).

  To view your permissions, right-click on the file/folder/drive, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.  To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/. In this csse make sure grant you full permissions and check also advanced special permissions (including the inherited permissions) which can substitute for this entry to limit your rights by assembling as well.

  To resolve this problem with folders or drive, take possession of the records or the reader (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  You can change now switched to read-only (even if the main folder indicates that they are always read-only - you can access yourself as the owner).  You can keep them in read-only to other users, customers and administrators even (although they can support themselves and access, if they wish, and it is really not that you can do to stop it except protect the file with a password by using a 3rd party product.)  Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.  To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  Good luck and I hope this helps!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.

  To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.

  Hello m.velentino,

  Not sure if you are still having the error message isn't valid win32.applicaiton.

  Get the error: not a valid 32-bit application can have several origins:
  I have listed some of them below.

  The file is corrupted, bad or missing.
  -If the hard disk is damaged or hurt it cause work programs to fail, either because not all data can be read from the hard drive the program is damaged on the drive. Run scandisk and defrag on the hard disk to check for potential errors.
  -If you run the program from a shortcut on the computer, verify that the program is still on the computer. In some cases if the program is no longer installed on the computer, you can get this error.

  File is not designed for your version of Windows:
  -If you try to run a program that is not designed for your version of Windows, you can get this error.
  -Although many old programs designed to work in older versions of Windows will work with new versions of Windows, unfortunately, not all programs will not work.
  -If the program is an MS-DOS program more former start program or Windows, you can get this error.
  -If the program is designed for a 64-bit version of Windows and you are running in a 32-bit version of Windows, it will not work and generate this error.

  File is a virus, worm or other malicious program file.
  - This error can be generated by a file that is a virus, worm, Trojan horse or other type of malware file. Often, this will result because the antivirus installed on the computer will not allow the file to install or run. Try to analyze the file to check, it is not a virus or infected.
  -If the file has been checked and is clean, it is always possible that the virus protection program or a another program installed on the computer is at the origin of questions during installation or execution of the program. Start the computer in Mode safe and try to run the program. start the computer in Mode safe will be that nothing is running in the background that could cause this problem.
  
  Hardware incompatibility.
  -If you get this error during the installation of a program, it is also possible that the CD-ROM drive or the drive that you are installing the program from is not compatible with Windows or has drivers that are not compatible with Windows.
  -Download the latest drivers for your CD player or other of the manufacturer of the computer or the manufacturer of the equipment. (Microsoft does not pilot for other materials)

  Let us know if these suggestions help you.

  Marilyn

• Is there an easy way to add text to a chain control / indicator and keep the colors

  Hello

  Bassically I want to add text to a chain control / indicator without losing the formatting of the previous text.

  For a part of a program that I create, data will be transmitted to and from a serial device. I want to display this data in a chain control / indicator and change the color of the text of certain strings depending on data type (sent, received). Basically as a nice log window.

  

  At the moment, I update the chain control / indicator by reading the text and concatenated with the new string. However, this method removes the colors of previous text :-(

  Is it possible to add data to the control of the chain / indicator without losing the text previous formatting?

  I started to create a sub vi who reads a text both character and adds a new element in an array (offset color and text), if the color is distinguished by the previous character. Only problem is it seems to be quite time CPU.

  Thanks in advance,

  Matt

  MattB-5906 wrote:

  Is it possible to add data to the control of the chain / indicator without losing the text previous formatting?

  Actually, no. This means that you will have to use workarounds. Your workaround solution seems a bit involved. Basically, all you need to do is just to keep track of the pairs of end start/selection selection that must be colored in a table. Then just you loop in this table to color the text marked by the power positions.

  An alternative is to use a different indicator. Rather than an indicator of the string, you can use a table with a column. You can then set the foreground color on a cell by cell basis, and add a new line (row) will not affect the coloration of the previous lines.

• How can I move these indicator and the control to another page?

  How can I move these indicator and the control to another page? I page Kontrol and those on Installningar page, move!

  Or I want to hide them Kontrol page, how can I do

  Thank you

  Hi q8.

  move: select the controls, move them out of the container tab, drag them into the appropriate page of the tab container

  Hide: Terminal controls (!) right click, select "hide"...

• VISA: (Hex 0xBFFF001) timeout expired before the operation is complete. I get this error when you run a VI (instrument is set up to be controlled remotely using the TCP/IP Protocol)

  VISA: (Hex 0xBFFF001) timeout expired before the operation is complete. I get this error when you run a VI (instrument is set up to be controlled remotely using the TCP/IP Protocol)

  Please suggest a solution.

  Thank you very much, it worked!

• I get this error indicating that the module cannot be found 0x800707e

  Original title: 0x800707e

  I get this error indicating that the module cannot be found

  Check the variable path http://www.computerhope.com/issues/ch000549.htm

  Maske sure it points to valid directories.

  Try to set the file association for exe files

  http://www.dougknox.com/XP/file_assoc.htm

  Can you run a program now by clicking on it?

  Read this http://windowsxp.mvps.org/repairwmi.htm

  Run this http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=7684

• When I turn on the computer of mymy and it gives me request error indicating that "the required data was not put into memory due to an error of e state / of"0xc000009c".»

  Original title: IO error

  OK so I turn on my computer and it gives me request error indicating that "the required data was not put into memory due to an error of e state / of"0xc000009c".»

  I run an xp windows 2003-04. My computer does not start completely and if I click on debug or put end to the program there just restarts the computer. How can I solve this problem? and is it possible that I can update my software?

  You say that you can not even start in Safe Mode, so method 1 will not help you, method 2 will not help you and 3 method will not help you.

  I start in the XP Recovery Console and first run a chkdsk/r on the afflicted system, but since we don't know anything about your system, we will need more information.

  It is a shame that in the forums MS Answers, the first response to a new question is (or should be) a request for more information...  You are 5 days in your problem, and so for him it seems that you are not getting anywhere.  If the thread goes inactive for more than a few days, the response of the Microsoft Support Engineer will become the 'response' automatically because it has links to the KB articles.

  Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Your system have IDE or SATA disks?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

  If the system works, what do you think might have changed since the last time it did not work properly?

• Once you install a new printer firmware for your printer, is it possible to return to the earlier version of the firmware of the printer in case an error occurs?

  Once you install a new printer firmware for your printer, is it possible to return to the earlier version of the firmware of the printer in case an error occurs?

  It may be an option, as long as the error prevents you to connect to the machine. Even so, some firmware update software will not allow a downgrade. This is something that you should go to the manufacturer of the printer for more information.

• Disabled user account control, when try to turn on the States of error message "you don't have the appropriate permissions to perform this action.

  Disabled user account control, when try to turn on the States of error message "you don't have the appropriate permissions to perform this action.

  What type of account selected for this account you upward?

  And your administrator account is now or not?

  go in Start > Control Panel > user accounts see what is written under your username.