Control is not found in Mathscript

Similar Questions

• I try to open most of the icons in my control panel, I can get the message: application not found c\windows\system32\rundll32.exe.

  How can I fix it so I can delete unwanted programs? I try to open most of the icons in my control panel, I can get the message: application not found c\windows\system32\rundll32.exe.

  Please press Crtl + Alt + Delete key on the keyboard. Now, you will get a new manager called tasks window.

  Now, please hold down the CTRL key on the keyboard and click file, new task on the Task Manager.  Now, you will get a new black window. Copy the following and paste it into the black command window and press ENTER. Restart the computer.

  Assoc .exe = exefile

  Assoc .lnk = lnkfile

• KB936929 - error "ID of control not found": 0x8007058D

  Windows XP Service Package 3 - KB936929, Error Message: ID of control not found

  No idea how to fix this?

  Although he mentions that SP3 can give you a clue:
  You receive the "ID of control not found" error message when you try to install Windows XP Service Pack 2
  http://support.Microsoft.com/kb/878472 TaurArian [MVP] 2005-2010 - Update Services

• Error: ID of control not found when trying to install Service Pack 3.

  Original title: download Service Pack 3 problems.

  can ' download t and installation of service pack 3 as a pop box and say "ID of control not found." How can I fix?

  Hi KathyHook,

  You try to install Service Pack 3 through Windows Update?

  You can follow this link & check if the problem persists:

  How to troubleshoot an installation fails in Windows XP Service Pack 3?

  Hope the helps of information.

• Error message when you attempt to access the Internet Options in the control panel: "determined the module is not found.

  Original title: Regsvr32 and Regsvr32 the meui.dll / imshtml.dll

  I had problems to open internet options on my control panel.

  I ran the following and this is what I have
  Same message for both
  "specified module is not found.
  I have an old computer and cannot find my windows disc to repair. Is there another way to do it?

  Hello ColleenMilligan,

  Click Start, click Run.
  Since the command run, type inetcpl.cpl.
  This should bring up the Internet Options Control Panel.
  Then go to the Advanced tab.
  Downstairs, I recommend that you reset Internet Explorer.

  If you open Internet Explorer, the command in the type bar, right-click.
  It give you options of the menu, status bar and links bar.
  If the menu bar is not checked, check it out.
  This will give you File, Edit, View, Favorites, tools, and help.

  Click on tools, and you can access internet by options.

  Please reply back and let us know if this can help.

  Marilyn

• I can't get into my control panel to change the security settings or anything like that. It says \windows\systems32\rundll32.exe not found. What should I do?

  I can't get into my control panel to change the security settings or anything like that. It says Windows\systems32\rundll32.exe not found.  What should I do?

  Hello

  1. don't you make changes on the computer before this problem?

  Check if the steps of troubleshooting the following article shows you help.
  Cannot find the Rundll32.exe file when you open Control Panel
  http://support.Microsoft.com/kb/812340

• When I try to open the Control Panel, add or remove programs, a window appears saying "C:Windows\system32\rundll32.exe Application not found.

  Original title: rundll.exe error

  I checked the previous messages and can't seem to find a solution to this problem.  Recently I ran 3 different scans, i.e. sbybot, avast and Malawarebytes virus. After that I ran these anti-virus programs and remove viruses, I was not able to open any more virus scanners. Every time I tried, would open a window saying "Choose the program you want to use to open this file." If I try to download a new virus scanner, it says the same thing.

  When I try to open the Control Panel, add or remove programs, a window appears saying "C:Windows\system32\rundll32.exe Application not found. I checked this file on my c: drive\system 32 and see the rundll.exe file. I also copy and pasted the file rundll.exe my CD of Windows XP in c: Windows\System32

  Everything else seems to work fine on my computer, and I get no message on the rundll.exe file when the computer starts up first.

  Any help would be popular!

  Hello

  You rename regedit.exe regedit.com?

  Remove from my computer-> tools-> file-> option-> view tickmark for "Hide extension for known file types"-> ok-online local disk now C:\WINDOWS\

  Regedit.exe search

  Make a right-click Rename regedit.com

  From start-> Run Type & -> regedit.com-> ok.

  and follow the registry path IE: HKEY_LOCAL_MACHINE\Software\Classes\Exefile\Shell\Open\Command

  I hope this helps.

• Computer not found displayed on the printer control panel. ?

  Computer not found displayed on the printer control panel. It analyzes not but prints ok. Running the utility HP scanner Diagnostic 4.2 says service Windows Imaging does not. If you ignore this message says the Twain service does not work because it is used by another service?

  Problem solved. I managed to get Windows Imaging served running afetr a lot of the research and this scanner enabled to work. Thanks, but does not need your help after all!

• My computer says "windows defender is not found", and I can't change the startup of programs in the Control Panel, it says cannot find 'C:\program '.

  Original title: can you help me?

  My computer says "windows defender is not found", and I can't change the startup of programs in the Control Panel, it says cannot find 'C:\program '. I'm vwindows vista

  My computer says "windows defender is not found", and I can't change the startup of programs in the Control Panel, it says cannot find 'C:\program '. I'm vwindows vista

  You in fact 2 questions.
  I will answer the one who is the most important, for you it is.

  RE: Change startup programs

  You can access this way startup programs...

  Start button > in the search box, type msconfig > Enter > click on Startup tab. Here's your startup programs.
  To disable, uncheck the box in front

  To activate... check the box opposite.

  RE: Windows Defender cannot be found.

  If you have the following AV, antivirus, programs installed, close your Windows Defender. Purpose of these AVs have their own advocates. 2 defenders on the same machine will create conflicts.
  Bottom line: it's ok. It's normal.
  List of AVs which will stop Windows Defender:
  Norton
  McAfee
  AVG
  Microsoft Security Essentials

  If you don't have AV programs above, here's how to restart Windows Defender:

  Start button > in the search box, typeServices > press the Enter key > scroll to find Windows Defender, click on it >...
  topic status , it must be said... Has begun
  under Startup Type, it must be said... Automatic
  If it does not say that, right click on Windows Defender > click Properties >
  in Startup Type, click on the pointer to the right and select automatic
  to the service status, click Start
  Click OK when finished.

• GrooveNew.dll not found when starting Control Panel

  A few days ago, I noticed that I get an error message when I run the Control Panel application.  It is said

  "control.exe - Unable to locate component".

  This application has failed to start because GrooveNew.DLL is not found. Reinstalling the application may fix this problem. »

  After clicking on OK twice, the control panel starts and seems to work.

  Hello

  According to the error message it seems to be this GrooveNew.dll file has been deleted somehow. GrooveNew.dll is a file belonging to the Microsoft Office program.

  I suggest you to repair the Office program by following this link.

  Automatically repair Office programs

  http://Office.Microsoft.com/en-us/help/HP052372001033.aspx

  Or, you can also try to repair the program & features in Control Panel.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".

  Original title: when setting up Windows Media Center, I get the error message: "IR hardware not detected".

  I have an internal TV Tuner that has been installed by HP, when I bought recently a "computer build-your-own." (According to the control panel Device Manager, my tuner is a Win TV HVR 1290, made by Hauppauge). The computer came with Windows 7. While installing Windows Media Center, after setting up the TV Signal (on channel 3) I am able to see a video thumbnail on my computer screen. I am also able to change the channel using my remote control U-Verse (not the Windows remote control supplied with the computer). So far so good! I then hit next and get the following message: "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".  After you receive this message, the installation procedure is completed. I called HP that support intalled the tuner. They had not the slightest idea what to do. I then called Hauppage customer (manufacturer of TV Tuner). They said that I need to plug one end of the IR Blaster cable that shipped with the computer in a slot in the back of my computer (they told me which slot). They said so to run the IR all the way cable to my cable box and the other end of the cable to my cable box of band. They said it was necessary to be able to use my Microsoft Remote to instruct the box to change channels (cable IR stuck on the box). I told her that I did not use the Microsoft Remote, I could change the channel with my U-verse remote (that I preferred to use anyway). He said that it took the cable on the band decoder in order to remove the error message and the installation of Windows Media Center. I then called U-Verse technical adapter who informed me of their set-top boxes (made by Cisco Systems) do not have the ability to receive signals IR IR Blaster cable (or any othe IR signal source). Microsoft is apparently not understand how U-Verse set-top boxes are designed to work and sells a product incompatible remote control/IR. My question is this: How do I set up Windows Media Center, in order to avoid getting the error message "IR hardware not detected" when you install Windows Media Center and just use the remote control of the U-Verse that I prefer to use in the first place. Once understand you this point, please send the information to HP, At & T U-Verse and others. Thank you.

  Ron, I have something for you!

  and for all the people who have this problem :)

  Hi, I had the time of IR not detected in Windows 7 Ultimate with a TV wonder 650 card and a box of digital adapter from Verizon for my PC... Go on the road to installation and after the Media Center channel search, choose manual configuration. Choose the aerial signal (I aso picked after this analog) l. After he sought more, he finds no channels.  Do not be afraid. Just accept it and go to the main settings page in the Mediacenter. If I remember correctly, then select TV Guide. Choose Add channel. I added the channel 3.

  Since my Verizon box has no IR for the computer, I added the channel 3 for the media Center and I change the channels with my Verizon remote. All my stations in the Verizon box go to Channel 3.

  The story here is so, for some reason any Windows detects that only my box channel signal TV and you must manually configure the media center on the air, then go to settings and add the channel you want in the guide.

  Why the guide TV control which channel you can tune is beyond me, but the scanner locks all channels, it does not detect. they must be added manually in the guide.

  My TV works and looks okay now.

  It actually works!

  the only problem is that it is not in HD

  but there is something

  
  

• There is no company Manager fusion middleware control installed WebLogic Server 12.1.3 (error 404 (not found))

  Hello.

  We have installed WebLogic Server 12.1.3 on Linux x86_64 file fmw_12.1.3.0.0_wls.jar whithout any errors.

  Then load URL handler company fusion middleware control http:// < Host >: 7001/em we received 404 (not found) error

  There are no links, files and dir with EM on the host in/oracle/middleware.

  According to the documentation, it must be installed and worked after you start WebLogic server.

  Please, please help me understand it y it, or how we can install it.

  I think that you need to install FMW Infrastructure (ADF Runtime)

  You can download it from this URL

  Application Development Framework Downloads

  Install FMW Infrastructure on the same folder of weblogic Middleware and then create a new domain with Enterprise Manager option.

• HP your Control.exe - point of entry not found

  I own a laptop the HDX 9430EA and I get the error message at start: -.

  "Entry point not found HPtonectl.exe.

  'Set current process explicit App model Userid not found in Dynamic link library Shell 32.dll'

  I click OK and the message disappears. Furthermore, the HP tone controls work normally.

  Can someone please help to get rid of error message such that it drives me crazy.

  Thank you very much

  AggyTheSlyFox

  Solved!

  I clean installed Windows 7 Ultimate

  Concerning

  AggyTheSlFox

• Definition not found fl.controls:DataGrid

  I am using import fl.controls.DataGrid and I have this error that definition not found fl.controls:DataGrid

  You also need a DataGrid in your library.

• Not found MathScript in Labview 8.6

  Hi all

  I am a user of the labview 8.6, full version development. I want to use my script containing the mathscript node that I made on the labview 8.5, the full version of the development, but I can not open this script on version 8.6. When I eliminated the mathscript in the script node, I opened it successfully on the labview 8.6. I can't find the mathscript function in the function block diagram palette, although it does not exist on USING the software. To my knowledge, the mathscript function exist in version 8.6, as well as in version 8.5. I can't understand my problem. Plese give me suggestions.

  Thank you

  Hey,.

  I guess that LV 8.5 you activated 'Full development with MathScript system', in LV8.6 only 'Full Development System '.

  Please check your License Manager (start > program > National Instruments > License Manager).

  If you do not have the MathScript your content of contracts might have changed from 8.5 to 8.6

  In any case, I would say contact your local office of OR then, they may know what the content under your serial number.

  Christian