Control of data using multiple thermocouples via indicators and the waveform in real-time

Similar Questions

• IDCS6 MACOSX JS: data merge multiple txt files one after the other

  Hello everyone.

  I have a situation where I have to data merge multiple text files to a single file indesign real "base". Databases formats are the same, the point of difference is a code in the second field of the database that refers to a postal box (not a zip/postal code, a code of 'distribution center' that has possibilities of 56 or greater). I would prefer data merge a file and then somehow split the PDF via Acrobat, but the length of postal areas resulting is incompatible and something that cannot be done if the document "split" feature in acrobat.

  The database starts as one massive file but using a one line code, can be divided into postal areas in separate text files.

  My last question: is it possible data merge several files at the same time (for example one after the other) and to give them their names based on the names of the input text file?

  OLE Kvern had a script to merge the data to a file without the user interface. I changed the last line slightly so that it generates a PDF file based on [high quality]:

  if(app.documents.length != 0){
          var myDocument = app.activeDocument;
          app.dataMergeOptions.removeBlankLines = true;
          //Select a source file.
          var myDataFile = File.openDialog("Select a data file")
          var exported = "file location(redacted for the sake of this post)"
          if(myDataFile != ""){
                  myDocument.dataMergeProperties.selectDataSource(myDataFile,);
                  myDocument.dataMergeProperties.exportFile(exported,"[High Quality Print]",);
          }
  
  }
  

  I guess that the answer has to do with the variable "myDataFile" and rather than just being open a dialog box, it could be somehow by selecting a table of text files, but it is where I am out of my depth.

  Ideas or thoughts which may not involve trying to do both the many mergers, but can somehow revolve around a great fusion of PDF?

  Thank you very much

  Colin

  Since writing my last response, I realized there was a better answer. It is a scenario of Peter Kahrel and a modified version of a script by Olav Kvern. Details can be found here: batch of merge data | Adobe Community

  I have since made other mods to the script is easier to understand:

  if(app.documents.length != 0){
  // make sure to use the document that is open
          var myDoc = app.activeDocument;
  // get the name of the document that is open for future naming purposes
          var myName = myDoc.name
  // get the location of the folder that contains both the indesign files and the text files
          var myLocation = "FULL PATH LOCATION OF FOLDER CONTAINING TEXT FILE AND DESTINATION FOR FINAL PDFS"
  // define the names of the data files to use based upon the names of the indesign files
          var myImport = myLocation + myName + ".txt"
  // define the names of the data merged PDFs to be created
          var myExport = myLocation + myName + ".pdf"
  // the actual engine for the merge, including DM instructions such as remove blank lines, object fitting etc.
          var myDataFile = myImport
          app.dataMergeOptions.removeBlankLines = true;
          if(myDataFile != ""){
                  myDoc.dataMergeProperties.selectDataSource(myDataFile,);
                  myDoc.dataMergeProperties.exportFile(myExport, "[PDF/X-1a:2001]", );
          }
  
  }
  

  If this script will automatically merge a file which is open as LONG as the data file is the same name as the indesign file with .txt at the end for example

  Woodward.indd (indesign file)

  Woodward.indd.txt (used for merging text file)

  This script does still not the original memory and who was using an indesign document, to browse for many text files and merging of PDF based on text files.

  HOWEVER, I am sure that the answer to that is based only on the use of the script above (no need to Peter batch convert script) and changing the line 9 to be a loop for... but again, this is where I come to a grinding halt. Any help would be appreciated.

  Colin

• My iTunes does not detect my iPad.  I use Windows 10, Norton 360 and the latest version of iTunes.  All software are up to date, and each says it works correctly.

  My iTunes does not detect my iPad.  I use Windows 10, Norton 360 and the latest version of iTunes.  All software are up to date, and each says it works correctly.

  Turn off or get rid of Norton.   I really don't see why you need it.

• When using my computer, all applications and the windows are closed at the same time, got disconnected and the computer turns off as if someone stops manually.

  Original title: it's a virus that's causing this?

  It happened a few times now. While I use my computer, all applications and the windows are closed at the same time, I am disconnected and the computer is off, as if someone manually stops the computer. I turn on the computer and log in and everything seems to be okay. No data deleted, not that I could find and detect anyway. One day when I turned on the computer, it run chkdsk before doing the usual startup. I use the computer for 2 years and this is the first time, she never did a chkdsk on its own. I used Microsoft Essentials and no viruses were found.

  Should I worry?

  Hello

  You can read the following article and try to download the Microsoft Safety Scanner and perform a full scan on your computer and check.

  Microsoft safety scanner

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Check if there are logs of events related to the issue in the event viewer which may help us to solve the problem of the:

  What are the information contained in the logs of the event (Event Viewer)?

• I want to hang the Tower up to my big screen and instead of using a keyboard, I bind a tablet that I can use as a keyboard and to manipulate objects on the screen in real time

  I am in the middle of do a remodeling and think about a furture upgrade my PC at home, I want to hang the Tower up to my big screen and instead of using a keyboard, I want to connect a tablet that I can use as a keyboard and to manipulate objects on the screen in real time. Is there a way to do this?

  (1) before the PC upgrade, please read the complete technical documents for all devices

  you want to go to upgrade

  (2) it is the first thing to do to make complete lists of materials you want to change.

  Compare specifications detaily, note important diference between many of the same features

  (3) for more information on some devices and materials, see link below

  http://www.Microsoft.com/en-us/Windows/compatibility/WIN8/CompatCenter/home?language=en-us

• I have a site published under a recent URL, I used for a personal site and the site displayed the URl needs to be removed, but I can't take it down because I do not know the account info that it is under please help! Thank you!

  I have a site published under a recent URL, I used for a personal site and the site displayed the URl needs to be removed, but I can't take it down because I do not know the account info that it is under please help! Thank you!

  If it is hosted with Adobe Business Catalyst Adobe Support can help you.

  If it is hosted elsewhere the only people who can help you with that is where it is hosted.

• Examples of a model of data using multiple data sources?

  I'm looking for a sample report using multiple data sources. I saw one where they make a master-detail, but I'm looking to combine the results in a sorted order (sorting between all sources of data). Master/detail used a variable binding to bind two defined queries, I think what I will not have this, so I'm lost on how to get there. I have reports using multiple sql queries and there is a way in the data source drop-down to tell him to combine data sources. It seems to be a process with data models, it is still possible.
  
  Any pointers/links would be appreciated.
  
  Gaff

  Use this

  http://download.Oracle.com/docs/CD/E10415_01/doc/bi.1013/e12187/T421739T434255.htm#3547893

• Need help recovering data of the target in real time. Using NI 9233

  I have a cRio-9012 with 9233 module. I have recently setup of the software for the computer and the target. I have also gone through and set up the "NI 9233 start-up scan mode" to use on my controller. However I couldn't really get the execution of vis data. Could I have missed?

  The VI is executed, but it reads zero while I use an accelerometer (Wilcoxon research model 797-33).

  You should consider the specific\ni of Labview\examples\compactrio\module 9233\ examples.

• Control mobile/data files to a different folder during the upgrade to 10 g 9i

  Hello
  
  I'm in the process of upgrading 9.2.0.4 (Enterprise Edition - linux Redhat 4) on the same server to 10 g R2.
  
  I already finished running DBUA, but due to the bug MAXDATAFILES 100, I had to choose not to move the data files. Now that the upgrade was successful, I need to move the controlfiles, 10g 9i Home Home data files.
  
  I know I need to recreate the controlfile to support up to a trace file, but I'm confused as to what script should I use trace files because it has 2 almost identical scripts. One with RESETLOGS, another with NORESETLOGS.
  
  What is the difference between these two? The 9i database was arrested before the upgrade and supported (cold backup), whether I should not all archivelogs or online content of newspapers I think.
  
  Thank you
  Sinan

  I know I need to recreate the controlfile to support up to a trace file, but I'm confused as to what script should I use trace files because it has 2 almost identical scripts. One with RESETLOGS, another with NORESETLOGS.

  What is the difference between these two? The 9i database was arrested before the upgrade and supported (cold backup), whether I should not all archivelogs or online content of newspapers I think.

  RESETLOGS - Specify RESETLOGS, if you want the Oracle database to ignore the content of the files listed in the LOGFILE clause. These files do not have to exist. Each redo_log_file_spec in the LOGFILE clause must specify the SIZE parameter. The database assigns redo all online log file groups to thread 1 and enables this thread for public use by any instance. After using this clause, you must open the database by using the ALTER DATABASE statement RESETLOGS clause.

  NORESETLOGS - Specify NORESETLOGS if you want Oracle database to use all files in the LOGFILE clause as they were when the database was last opened. These files must exist and must be the online redo logs rather that restore backups. The database reassigns log files groups redo the nets to which they were previously allocated and reactivates the discussions that they have been previously activated.

  CREATE CONTROLFILE
  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14200/statements_5003.htm#SQLRF01203

  If you AutoConfig enabled, you can use quick Clone to achieve the same.

  Thank you
  Hussein

• Subtracting the two waveforms, an acquired using DAQ voltage analog input and the other being generated internally

  Hello NOR community,

  I'm new to LabView and was hoping someone might be able to help with a question I have. Currently, I use a data acquisition unit to sample external sine and I would like to change this signal by adding another signal that I could control using the front panel. Whenever I try just connect entry with something like the waveform sinusoidal vi and put a subtraction sign between them it doesn't work (I get an empty waveform graph). To work around this problem, I've resorted to a signal (via an analog output) and followed by reading the signal to data acquisition, and then finally I add the two together. It works this way, but he wastes two channels and I imagine that there is a better way. I enclose my VI, and I have marked the location of interest "where signals get subtracted ', which is currently displayed using two entries.

  Thank you

  Leo

  You must ensure that your sampling frequency and number of samples is the same.  It seems that your sample (with default values) rate is the same (1 kHz), but your number of samples is different (100 to 1000 the acquisition wave vs simulation).

• Firefox uses my specified windows Win7 and the style of the toolbar

  I am running Win7, but have the style of window, the 'Classic' value, i.e. no aero or whatever it is. Just a simple blue title bar, any other area header in gray, as the default theme in Win-98/Win-NT/Win-2000. Suddenly after a few Firefox-automatic update to 29.0.1 the toolbar at the top of the page "file edit etc" is in a strange bluish color and the same with the tabs.

  I expect Firefox to use EXACTLY the general Windows theme that I've specified in Win7, not to invent other colors. This is the main idea with specification of a theme, for all applications on the same topic. How can I control Firefox to apply the theme to Windows?

  Hi eplgh,
  Please check the title bar customization in the Menu with three horizontal lines. This is alternate tabs to have their own color once again.

  I hope this helps.

• Refresh the data in the dashboards in real time

  Hello
  
  How can I see near real-time refresh data in dashboards OLIVIER?
  
  The data scheduling ETL overnight posted one day ago.
  
  Concerning
  Naeem Akhtar

  Hello

  In order to show the new data in the dashboard (not memory cache), we're going for querying the event table.

  Using pooling of events will run the incremental load to display real-time data?

  No it dosent run any incremental charge, he is serving the cache to show data in dashboards

  Go through below guide which will help you out-
  http://docs.Oracle.com/CD/E14571_01/bi.1111/e10541/querycaching.htm#i1005513
  http://gerardnico.com/wiki/dat/OBIEE/event_table

  Kind regards
  Srikanth

• How to use an IF ELSE statement and the xdoxslt: get_variable together?

  First of all, I'm a big fan of this forum and I would like to thank the community for helping to make better the world BI Publisher.
  
  I'm trying to populate a table with a value of years of data with column = PRODUCT and row = month to DATE. Here's the catch, not every month will be given. Then here's where is my problem, I am not able to use an IF ELSE statement with an expression XDOXSLT:GET_VARIABLE so that if there is no given for this month the default value will be 0.
  
  Can someone help me find a solution to one of the attempts below or a method entirely new? Thank you!
  
  BP4 = numeric value of months with a DATE (more code to extract only the month DATE not included here)
  JAN1 = PRICE if there is data, 0 otherwise
  
  (1) I tried and it did not work:
  <? If: xdoxslt:get_variable($_XDOCTX,'BP4'), 01 xdoxslt:set_variable($_XDOCTX,_'JAN1',PRICE) then another end if xdoxslt:set_variable($_XDOCTX,_'JAN1',0)? >
  <? xdoxslt:get_variable($_XDOCTX,'JAN1')? >
  <? end if? >
  
  (2) I tried and it did not work:
  <? xdoxslt:IfElse (xdoxslt:get_variable($_XDOCTX,'BP4') = '01', xdoxslt:set_variable($_XDOCTX,_'JAN1',PRICE), xdoxslt:set_variable($_XDOCTX,_'JAN1',0))? >
  <? xdoxslt:get_variable($_XDOCTX,'JAN1')? >
  <? end if? >
  
  (3) I tried and it did not work:
  <? xdofx:If xdoxslt:get_variable($_XDOCTX,'BP4') = '01' xdoxslt:set_variable($_XDOCTX,_'JAN1',PRICE) then another end if xdoxslt:set_variable($_XDOCTX,_'JAN1',0)? >
  <? xdoxslt:get_variable($_XDOCTX,'JAN1')? >
  <? end if? >
  
  example of XML data:
  < ROW >
  < name > Craig Hernandez < / NAME >
  < DATE > 2013 - 01-01 T 00: 00:00.000 + 08:00 < / DATE >
  < PRICE > 31 < / PRICE >
  BPD of < PRODUCT > < / PRODUCT >
  < / ROW >
  
  
  -TRD
  
  Published by: 990965 on February 28, 2013 08:27

  >
  (1) I tried and it did not work:
  
  
  

  (2) I tried and it did not work:
  
  
  

  (3) I tried and it did not work:
  
  
  >
  so

  works for me, it's

• When I use gmail printing is microscopic and the text enlarger does not correct.

  When I use gmail, the print is so small that I can't read. A week ago, when I was in gmail, the print transformed suddenly from normal to microscopic, without my even having hit a key on the table. In fact, I'm writing this post on the Mozilla help page, printing just celebrated of readable in almost unreadable. In gmail, when I use "setting" and change the size of the police, he does nothing to expand the characters. If anyone has an answer, please be specific. I read solutions but who tell me to use the orange of Mozilla and the 'ladder', I don't know where they are.

  I don't have this problem with I use Internet Explorer and the problem is forcing me to use this browser, which I prefer not to do.

  Thank you everyone for your help.

  Rob

  You can have zoomed pages by accident.
  Reset the zoom of page on pages that are causing problems.

  • View > Zoom > reset (Ctrl / command + 0 (zero))
  • Press the ALT key, or press F10 to display the Menu bar.
  • http://KB.mozillazine.org/Zoom_text_of_web_pages

• Problems using with a 40TL968B TV and the Blu ray BDX4350 FPT-AG02G 3D glasses

  Hello

  I just set up a new player to Tv and BDX4350 40TL968B.

  I decided to invest in two or three pairs of glasses of the FPT-AG02G.

  When you try to view a 3D disc I'm having a problem where the shutter affect on continue glass cutting.

  What is happening on the two pairs of glasses and they both had a full charge using the USB cable supplied.

  When I turn on the light flashes every few seconds and if I get close to the TV, the 3-d effect begins on the glasses. This will continue for perhaps 5 to 10 seconds, where the function of components and the image appears is 3D, before stopping and I find myself watching the blurry image of TV again.

  If I move then if the lenses are very close to the IR output of the TV then the affect of filling may start but stop after period again.

  The TV IR Transmitter is not blocked by anything whatsoever, and niether is the receiver the most on the glasses.

  Everyone knows that before or have any ideas how to overcome the problem?

  Thank you, Ian.

  > When I turn on the light flashes every few seconds and if I get close to the TV, the 3-d effect begins on the glasses. This will continue for perhaps 5 to 10 seconds, where the function of components and the image appears is 3D, before stopping and I find myself watching the blurry image of TV again.

  I think you should check if the battery of 3D glasses is OK.

  I found a nice page of FAQ from Toshiba that can be useful in the future. :
  https://ask.Toshiba.co.UK/help/en-UK/3D-TV/?page=1