Control of grid installation Questions

Similar Questions

• Failure of the initial installation of INS-30131 required for execution of the controls of the installer cannot access the temporary location

  When I install Oracle Grid Infrastructure 12 c Release 1 (12.1.0.1.0), I have the following error:

  Failure of the initial installation of INS-30131 required for execution of the controls of the installer cannot access the temporary location

  Cause:-unable to access the temporary location

  Action - make sure that the current user has required permissions to the temporary location

  Details of the addition

  -GLWB-1560: "/tmp/" temporary directory path is shared on the nodes '... »

  The oracle user I use is to have access in / tmp, I did a test by creating a file here.

  Any idea?

  Thank you

  This is the description of the error, I saw, but he was trying to find an idea how to solve this problem.

  Anyway, I solved it by renaming the Group of volumes and accordingly update the fstab and the grub.conf.

  Thank you

  Eugen

• [INS-30131] Failure of initial installation is necessary for the performance of the controls of the installer.

  Hi all

  12 c

  Win7 64 bit

  I install 12 c, but I encountered error:

  

  [INS-30131] Failure of initial installation is necessary for the performance of the controls of the installer.

  Cause - failed to access the temporary location.

  
  

  Action - make sure that the current user has required permissions to the temporary location.

  Additional information:

  Details of the exception - GLWB-11322: one or more node names 'oracle_training' contains one or more invalid characters following "_".

  
  

  What temp file should grant permissions to?

  Thank you very much

  JC

  Hello

  Details of the exception - GLWB-11322: one or more node names 'oracle_training' contains one or more invalid characters following "_".

  Line underscore or annoying characters on your node name cause problem. What is the name of node? Please change it will solve the problem.

  Current version 12101 is to have this constraint. See MOS: 1957895.1

  -Pavan Kumar N

• Grid Control 11g R1 installation YES-10133 error

  Hi all
  
  I'm installing Oracle Enterprise Manager 11 g Release 1 on x86_64 SUSE Linux 10. Here I am faced with an error * "YES-10133:Invalid rest area. There is no top-level for Linux for the Installation component in the transit area. » *. Installation packages have been downloaded from http://www.oracle.com/technetwork/oem/grid-control/downloads/linuxx8664soft-085949.html. All three zip files are fully downloaded, verified and unpacked. Someone on the internet said that these zip files must be extracted to a directory. But I see some folders exist in all the three unzipped files are the same, but contain different files. If I put them in a directory that they would be "crushed." What should I do? Please suggest. Thanks in advance.
  
  Best regards
  Guangming Duan

  864397 wrote:
  Hi all

  I'm installing Oracle Enterprise Manager 11 g Release 1 on x86_64 SUSE Linux 10. Here I am faced with an error * "YES-10133:Invalid rest area. There is no top-level for Linux for the Installation component in the transit area. » *. Installation packages have been downloaded from http://www.oracle.com/technetwork/oem/grid-control/downloads/linuxx8664soft-085949.html. All three zip files are fully downloaded, verified and unpacked. Someone on the internet said that these zip files must be extracted to a directory. But I see some folders exist in all the three unzipped files are the same, but contain different files. If I put them in a directory that they would be "crushed." What should I do? Please suggest. Thanks in advance.

  Best regards
  Guangming Duan

  Hello Sylvia,.

  You must decompress all the files in the same directory. Don't worry about records. Unzip tool will extract the files in the correct folders (will not overwrite the contents of the folder).

  Concerning

  Grosbois

• control of Sax basic question

  I recently installed Systat SigmaPlot 11, installation went very well.  The program runs not and says "can not find the Sax basic command, please reinstall."  The question is, I had already had this software on my computer before an upgrade of the hard drive.  I'm running MS Vista without SP1, as I was before.  I tried to 'fix' the installation without success.  When I uninstall gives me internal error 2762, so I had to run a third party app to rid my computer of this program (it cleaned up the registry as well).  So I repeated this process several times, install, run fail, uninstall, fail, run third-party application, reinstall, run, fail...

  I google and google and nothing found on the base of Sax control and why I might have had before and's it not now.  Can someone help me understand how to get this program to run, if I need Sax basic control where to get, etc...

  Thank you

  Hi iamfroda,

  Please use the Forum of the community for Vista.

  The software for your device is provided by the manufacturer.

  I think that if you go to the web site of sigma plot you will find the drivers and software for your device.

  Matt Hudson
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• script of root.sh in CRS (Grid Installation)

  RDBMS version: 10.2.0.4.0, 11.2.0.2
  Operating system: Solaris 5.10 SPARC
  
  I have 2 questions about running root.sh were made at the end of the installation of CRS.
  
  * 1 *. Which is the only task the more important than fact root.sh?
  
  In my opinion: on the first node, root.sh Initialise the OCR.
  On the remaining nodes, root.sh adds new nodes to the OCR. Would you guys agree with it?
  
  * 2 *. Are there major differences between executions of root.sh 10.2.0.4.0 and 11.2.0.2

  1.) is not a most important task. If something is missing to root.sh your cluster is not ready to go.
  What is an OCR, if voting disks are not formatted and the cluster cannot communicate.
  What is an OCR, if the interconnection of cluster has not been configured correctly.
  What is an OCR, if services were not enrolled in inittab
  etc.etc...

  Especially in 10.2, since if the root.sh did not work on the last node, the cluster never had "fatal" mode, so all features of cluster actually wasn't there.

  (2.) a lot...
  a.) one difference is that now the root.sh calls a perl script, which can be rerun (rootcrs.pl) for the clusterconfiguration
  (b) with 11.2.0.2, you can restart root.sh because root.sh now has control points.
  (c.) to 11.2 should any more to run sequentally. After you run it on the first node, you can run it in parallel on all the nodes of rest.
  (d.) now the root.sh on node already configures the cluster, all others root.sh do only an addNode...
  e.) it configures ASM (has not done in 10.2)
  f.) it creates a CSR (not nonexistent in point 10.2)
  g.) it configures negotiators (new feature of 11.2)

  These are just a few things...

  Concerning
  Sebastian

• Install the Control Agent Grid 10.2.0.5 on Oracle Applications 11i

  Hello
  I'm planing to add my Oracle Applications 11i (application and DB layer) to Grid Control 10.2.0.5, install the Agents of grid control (10.2.0.5) on both nodes.
  Please tell me is there any specific in this installation of GC officers on nodes of Oracle Applications 11i (any document on this subject).
  
  Concerning

  Hello

  Please see these docs/links.

  Getting Started with Oracle Change Management Pack Application and Oracle Application Management Pack for Oracle E-Business Suite, version 3.1 [ID 982302.1]
  The management of Oracle and Oracle Application Change Management Pack applications Pack for Oracle E-Business Suite, version 3.0 [ID 812315.1]
  Guide to troubleshooting and the list of known issues for Oracle Application Management Pack for Oracle E-Business Suite, version 3.0 [ID 812294.1]
  Grid control 10.2.0.5.0 known issues [ID 787872.1]

  Application Management Pack and Application Change Management Pack 3.1 now available
  http://blogs.Oracle.com/stevenChan/2010/01/amp_acmp_31_ebs.html

  Enterprise Manager Documentation - 10g Release 5 (10.2)
  http://download.Oracle.com/docs/CD/B16240_01/welcome.html

  Thank you
  Hussein

• Probably two stupid installation questions...

  I just do a fresh install of El Cap on an SSD in my Mac Pro being initialized in another installation of El Cap (on a HARD drive).

  For various reasons, I had to run the installation program via an ethernet cable from my Macbook because was unable to download the Setup program when you start installing OSX on the HARD drive.

  I ran the installer and then came a prompt that the Mac Pro could restart 29 s so I pressed restart.

  Then the screen went black and a cone appeared.

  The spinner was there for probably 30 minutes before I pressed the power button to force a stop down.

  I installed El Cap several times before but never seen this behavior.

  When I pressed the power button again, the normal gray screen appeared and showed a bar countdown the minutes of progression

  And then I was able to complete the installation by entering the AppleID, etc..

  My two questions are 1) if installing from the Macbook could cause trouble? And (2) if I could have messed up anything forcing the closure downwards?

  Thank you very much in advance

  Philippe

  I had happen in the past (2 or 3 times that I can remember) after installation with no adverse reactions.

  (1) no comments because I don't know

  (2) I doubt it, but it is still possible. If the system works as it should with no quirks, I guess everything was fine

• Oracle 11g Grid Installation Getting Stuck during the installation in VirtualBox

  Hello friends,

  I try to install Oracle 11 g grid in two of the nodes that I configured in VirtualBox with OEL6 as the operating system.

  I did all pre-installation tasks and was ready to install the package in the grid, but I'm stuck at somepoint (to be precise 65%, where the /u01/app/11.2.0/grid files must be moved to node 2). I have waited long, but it's not far at all.

  This, I tried three times but still no use.

  My System Configuration is:

  Windows 10 - 64 bit

  i5 - 4200M (4 CPUs) - 2.5 GHz

  8 GB RAM

  The Configuration of the VM:

  Base memory: 3GB

  Processor: 2 processors

  

  Please help me with this.

  Thank you

  RT

  It would be mainly due to the firewall - disable them. Reference: Oracle 11 g R2 Grid Infrastructure installation stuck on 65%

• ODI Installation questions _ 11.1.1.7

  Hello

  While installing ODI Version 11.1.1.7 version of Windows Server 2012, has a few problems:

  (1) Got op - ups such as below; However, I took over ignoring and installation completed successfully.

  Don't know what these files are intended to be? I downloaded the Version of delivery but do not know why they are absent; Are really required for a complete Installation ODI?

  
  File not found: \ODI/od/disk1/install/win64/... E: /stage/Components/Oracle.OPSS.client/11.1.1.7/Data Filesfilegroup1.jar

  File not found: \ODI/od/disk1/install/win64/... E: /stage/Components/Oracle.OPSS.client/11.1.1.7/Data Filesfilegroup2.jar

  
  

  File not found: \ODI/od/disk1/install/win64/... E: /stage/Components/Oracle.OPSS.client/11.1.1.7/Data Filesfilegroup3.jar

  (2) I selected under installation options

  Installation of the Developer (Studio (with a Local Agent) ODI, ODI SDK

  Standard installation (ODI Standalone Agent)

  The question, I got here is that the ODI Agent does not work and more I didn't know the FOLDER Structure of the AGENT under the Oracledi folder. I also found OraclParams.bat file.

  Can you advise why this is different from the ODI 11.1.1.5 version please?

  (3) also, when I test the ODI_Agent; getitng the below error:

  Caused by: ODI-1424: Agent Host or port can be reached using the HTTP://Server:20910 / oraclediagent .

  Caused by: java.net.ConnectException: connection refused: connect

  at oracle.odi.runtime.agent.invocation.RemoteRuntimeAgentInvoker.invoke(RemoteRuntimeAgentInvoker.java:278)

  ... more than 41

  Is it because of the PORT problem?

  Thank you

  UB.

  Try to download the full version of Oracle's Support

  

  See you soon

  John

• OfficeJet 8600 more - Installation questions and gel

  This unit has been installed and functional for since December. The main computer is connected via a USB cable. Other computers using the wireless feature. Now, nothing works. I uninstalled and reinstalled the printer several times during the last three hours. This was done using the installation CD and also download the drivers/installation on HP website. I also tried to install just by pluggin installed in the unit. Nothing has worked. I tried then connected to the router and go wireless alone. A couple of times showed the Panel of the connected printer. However the blue light continues to blink and nothing has worked. When installing via the USB cable, it showed "USB storage device" failed. Most often, he showed the printer as printer FAX 8600. I do not use or want to fax. The scan function has never worked. When the device is blocked, the only cure is to unplug the power supply. Any suggestion is appreciated.

  -Very well, it seems that you have problems some wide installation of the unit. A preliminary question which I don't see in the description of your problem, what is the operating system that you are using?

• what disk path is really being checked when grid installation fails with PRVF-9802?

  Update: apparently, it's a false warning, like '... we cannot thoroughly test all combinations of SAN/udev'.

  [grid@rac101: grid] $./runcluvfy.sh stage pre - crsinst - n, rac101, rac102, rac103 - asm - asmdev/dev/prod_ocr1p1, / dev/prod_ocr2p1

  Conducting due diligence to install cluster services

  ...

  Control devices of the ASM...

  ERROR: / dev/prod_ocr1p1

  Storage is not found

  ERROR: / dev/prod_ocr2p1

  Storage is not found

  Checking for shared devices...

  PRVF-5150: / dev/prod_ocr2p1 path is not a valid path on all nodes

  PRVF-5150: / dev/prod_ocr1p1 path is not a valid path on all nodes

  Attributes of UDev search drives ASM began...

  ERROR:

  PRVF-9802: try to get information node udev "rac102" failed

  ERROR:

  PRVF-9802: try to get information node udev "rac101" failed

  ERROR:

  PRVF-9802: try to get information node udev "rac103" failed

  Check failure of UDev attributes for ASM disks

  Devices to check for ASM failed

  ....

  [grid@rac101: grid] $ he 's/dev/prod *.

  BRW - rw - 1 grid asmadmin 252, 6 Nov 10:01 5 / dev/prod_ocr1

  BRW - rw - 1 grid asmadmin 252, 17 Nov 10:01 5 / dev/prod_ocr1p1

  BRW - rw - 1 grid asmadmin 252, 5 Nov 13 10:01 / dev/prod_ocr2

  BRW - rw - 1 grid asmadmin 252, 5 Nov 19 10:01 / dev/prod_ocr2p1

  BRW - rw - 1 grid asmadmin 252, 7 Nov 10:01 5 / dev/prod_ocr3

  BRW - rw - 1 grid asmadmin 252, 5 Nov 16 10:01 / dev/prod_ocr3p1

  BRW - rw - 1 grid asmadmin 252, 5 Nov 14 10:01 / dev/prod_vot1

  BRW - rw - 1 grid asmadmin 252, 5 Nov 21 10:01 / dev/prod_vot1p1

  BRW - rw - 1 grid asmadmin 252, 8 Nov 10:01 5 / dev/prod_vot2

  BRW - rw - 1 grid asmadmin 252, 5 Nov 18 10:01 / dev/prod_vot2p1

  BRW - rw - 1 grid asmadmin 252, 15 Nov 10:01 5 / dev/prod_vot3

  BRW - rw - 1 grid asmadmin 252, 20 Nov 10:01 5 / dev/prod_vot3p1

  ...

  [grid@rac101: grid] $ he 's/dev/map

  Total 0

  CRW - rw - 1 root root 10, Nov 5 236 control 10:01

  lrwxrwxrwx 1 root root 11 5 Nov 10:01--> FSSYSDB1... / FSSYSDB1

  lrwxrwxrwx 1 root root 11 5 Nov 10:01--> FSSYSDB2... / FSSYSDB2

  lrwxrwxrwx 1 root root 11 5 Nov 10:01--> FSSYSDB3... / FSSYSDB3

  lrwxrwxrwx 1 root root 11 5 Nov 10:01--> FSSYSDB4... / FSSYSDB4

  lrwxrwxrwx 1 root root 12 5 Nov 10:01--> FSSYSLOG1... / FSSYSLOG1

  lrwxrwxrwx 1 root root 12 5 Nov 10:01--> FSSYSLOG2... / FSSYSLOG2

  lrwxrwxrwx 1 root root 12 5 Nov 10:01--> FSSYSLOG3... / FSSYSLOG3

  lrwxrwxrwx 1 root root 12 6 Nov 10:47 prod_ocr1->... /prod_ocr1

  lrwxrwxrwx 1 root root 14 6 Nov 10:58--> prod_ocr1p1... /prod_ocr1p1

  lrwxrwxrwx 1 root root 12 6 Nov 10:47 prod_ocr2->... /prod_ocr2

  lrwxrwxrwx 1 root root 14 6 Nov 10:48-> prod_ocr2p1... /prod_ocr2p1

  lrwxrwxrwx 1 root root 12 6 Nov 10:48-> prod_ocr3... /prod_ocr3

  lrwxrwxrwx 1 root root 14 6 Nov 10:48-> prod_ocr3p1... /prod_ocr3p1

  lrwxrwxrwx 1 root root 12 5 Nov 10:01--> prod_vot1... /prod_vot1

  lrwxrwxrwx 1 root root 14 5 Nov 10:01--> prod_vot1p1... /prod_vot1p1

  lrwxrwxrwx 1 root root 12 5 Nov 10:01--> prod_vot2... /prod_vot2

  lrwxrwxrwx 1 root root 14 5 Nov 10:01--> prod_vot2p1... /prod_vot2p1

  lrwxrwxrwx 1 root root 12 5 Nov 10:01--> prod_vot3... /prod_vot3

  lrwxrwxrwx 1 root root 14 5 Nov 10:01--> prod_vot3p1... /prod_vot3p1

  lrwxrwxrwx 1 root root 7 5 Nov 10:01--> zero... DM - 2

  lrwxrwxrwx 1 root root 8 Nov 10:01 vg_01-lv_home--> 5... DM - 23

  lrwxrwxrwx 1 root root 7 Nov 10:01 vg_01-lv_root-> 5... DM - 0

  lrwxrwxrwx 1 root root 7 Nov 10:01 vg_01-lv_swap--> 5... DM - 1

  lrwxrwxrwx 1 root root 8 Nov 10:01 vg_01-lv_tmp--> 5... DM - 24

  lrwxrwxrwx 1 root root 8 Nov 10:01 vg_01-lv_u01--> 5... DM - 25

  lrwxrwxrwx 1 root root 8 Nov 10:01 vg_01-lv_var--> 5... DM - 22

  I have found no change in rules multipath.conf or udev that changes ownership here.  I have an alias records in my multipath.conf file, which is NOT readable by the user of network:

  ...

  	{multichannel
  	WWID 36000d310007cbd00000000000000002c
  	alias prod_ocr1
  	}
  	{multichannel
  	WWID 36000d310007cbd00000000000000002d
  	alias prod_ocr2
  	}
  	{multichannel
  	WWID 36000d310007cbd00000000000000002e
  	alias prod_ocr3
  	}

  Also tried to add a uid, gid, multipath.conf mode, but no diff.

  A ran kpartx - a/dev/prod_ocr {1 | 2 | 3} on all nodes. Started several times.

  ....

  [root@rac101: ~] # he 's/dev/oracleasm/discs.

  Total 0

  BRW - rw - 1 grid asmadmin 8, 240 5 Nov 10:01 FSSYSDB1

  BRW - rw - 1 grid asmadmin 8: 32 Nov 10:01 FSSYSDB2 5

  BRW - rw - 1 Grill asmadmin 65, 0 5 Nov 10:01 FSSYSDB3

  BRW - rw - 1 grid asmadmin 8, 48-5 Nov 10:01 FSSYSDB4

  BRW - rw - 1 Grill asmadmin 65, 128 5 Nov 10:01 FSSYSLOG1

  BRW - rw - 1 grid asmadmin 8, 64-5 Nov 10:01 FSSYSLOG2

  BRW - rw - 1 Grill asmadmin 65, 32 5 Nov 10:01 FSSYSLOG3

  BRW - rw - 1 grid asmadmin 8, 81-5 Nov 10:01 OCRVOTE1

  BRW - rw - 1 Grill asmadmin 65, 49-5 Nov 10:01 OCRVOTE2

  BRW - rw - 1 grid asmadmin 8, 97-5 Nov 10:01 OCRVOTE3

  BRW - rw - 1 Grill asmadmin 65, 65 5 Nov 10:01 OCRVOTE4

  BRW - rw - 1 grid asmadmin 8, 113 5 Nov 10:01 OCRVOTE5

  BRW - rw - 1 Grill asmadmin 65, 81-5 Nov 10:01 OCRVOTE6

  ....

  I did createdisk on all disks, and listdisk is compatible on all nodes:

  [root@rac103 ~] # oracleasm scandisks

  Reload from disk partitions: fact

  Cleaning up stale ASM disks...

  ASM disks scanning system...

  Instantiation of disk 'FSSYSDB2 '.

  Instantiation of disk 'FSSYSDB4 '.

  Instantiation of disk 'FSSYSLOG2 '.

  Instantiation of disk 'OCRVOTE1 '.

  Instantiation of disk 'OCRVOTE3 '.

  Instantiation of disk 'OCRVOTE5 '.

  Instantiation of disk 'FSSYSDB1 '.

  Instantiation of disk 'FSSYSLOG1 '.

  Instantiation of disk 'FSSYSDB3 '.

  Instantiation of disk 'OCRVOTE2 '.

  Instantiation of disk 'FSSYSLOG3 '.

  Instantiation of disk 'OCRVOTE4 '.

  Instantiation of disk 'OCRVOTE6 '.

  ....

  [root@rac101: ~] # oracleasm deletedisk - v/dev/prod_ocr1p1

  Disk "OCRVOTE1" is a valid ASM disk

  Header of drive compensation: oracleasm-writing-label: could not open device ' / dev/oracleasm/disks/OCRVOTE1 ': device or resource busy

  has failed

  Impossible to erase the disk 'OCRVOTE1 '.

  ...

  [root@rac101: ~] # oracleasm OCRVOTE1/dev/prod_ocr1p1 createdisk

  Device "/ dev/prod_ocr1p1" is already tagged for disc ASM 'OCRVOTE1 '.

  ....

  My udev rules are quite simple and readable by the user of network:

  [grid@rac101: grid] $ cat /etc/udev/rules.d/20-UEKasm-oracle.rules

  ENV {nom_DM} == "FSSYSDB?", NAME: = "%E {nom_DM}", OWNER: = "grid", GROUP: = "asmadmin", MODE: = "660".

  ENV {nom_DM} is "FSSYSDB? p? ", NAME: ="%E {nom_DM}", OWNER: ="grid", GROUP: ="asmadmin", MODE: ="660 ".

  ENV {nom_DM} == "FSSYSLOG?", NAME: = "%E {nom_DM}", OWNER: = "grid", GROUP: = "asmadmin", MODE: = "660".

  ENV {nom_DM} is "FSSYSLOG? p? ", NAME: ="%E {nom_DM}", OWNER: ="grid", GROUP: ="asmadmin", MODE: ="660 ".

  ENV {nom_DM} == "prod_ocr?", NAME: = "%E {nom_DM}", OWNER: = "grid", GROUP: = "asmadmin", MODE: = "660".

  ENV {nom_DM} is "prod_ocr? p? ", NAME: ="%E {nom_DM}", OWNER: ="grid", GROUP: ="asmadmin", MODE: ="660 ".

  ENV {nom_DM} == "prod_vot?", NAME: = "%E {nom_DM}", OWNER: = "grid", GROUP: = "asmadmin", MODE: = "660".

  ENV {nom_DM} is "prod_vot? p? ", NAME: ="%E {nom_DM}", OWNER: ="grid", GROUP: ="asmadmin", MODE: ="660 ".

  What did I wrong? Thanks in advance.

  In addition, changed paths drive going on and still fails!

  [grid@rac101: grid] $./runcluvfy.sh stage pre - crsinst - n, rac101, rac102, rac103 - asm - asmdev/dev/oracleasm/disks/OCRVOTE1, / dev/oracleasm/disks/OCRVOTE2

  ....

  Control devices of the ASM...

  Checking for shared devices...

  Peripheral device type

  ------------------------------------  ------------------------

  / dev/oracleasm/Disks/OCRVOTE2 disk

  / dev/oracleasm/Disks/OCRVOTE1 disk

  Consistency check of the owner of the device on all nodes...

  Check the consistency of the owner of the device for ' / dev/oracleasm/disks/OCRVOTE1 ' PASSED

  Check the consistency of the owner of the device for ' / dev/oracleasm/disks/OCRVOTE2 ' PASSED

  Checking consistency of the set of instruments through all nodes...

  Check the consistency of a set of instruments for ' / dev/oracleasm/disks/OCRVOTE1 ' PASSED

  Check the consistency of a set of instruments for ' / dev/oracleasm/disks/OCRVOTE2 ' PASSED

  Consistency check permissions of device on all nodes...

  Check the consistency of the device permissions for ' / dev/oracleasm/disks/OCRVOTE1 ' PASSED

  Check the consistency of the device permissions for ' / dev/oracleasm/disks/OCRVOTE2 ' PASSED

  Consistency check of the size of the unit on all nodes...

  Check the consistency of the size of the unit to ' / dev/oracleasm/disks/OCRVOTE1 ' PASSED

  Check the consistency of the size of the unit to ' / dev/oracleasm/disks/OCRVOTE2 ' PASSED

  Attributes of UDev search drives ASM began...

  ERROR:

  PRVF-9802: try to get information node udev "rac102" failed

  ERROR:

  PRVF-9802: try to get information node udev "rac101" failed

  ERROR:

  PRVF-9802: try to get information node udev "rac103" failed

  Check failure of UDev attributes for ASM disks

  Devices to check for ASM spent

  ...

  Post edited by: user10501000

  ... so we ignored the error and it installed fine.

• Control of grid for solaris x 86

  Grid control is available on solaris x 86?

  In Solaris x 86 software agent is available and not GC.

• 11 GR 2 (10.2.0.3) RDBMS and G.I - installation question

  Hello

  I have to build two new servers with the following configuration:

  Platform: RHEL 6.2 64bits

  Oracle RDBMS: 11 GR 2 (11.2.0.3)

  Grid infrastructure (ASM): 11 GR 2 (11.2.0.3)

  I downloaded the files for RDBMS 11.2.0.3 but I couldn't find grid Infra 11.2.0.1 download. I found a doc of MOS (ID 1362393.1) that says to download the Group of hotfixes that contains the "Oracle Grid Infrastructure (including Oracle ASM, Oracle Clusterware and Oracle Restart)".

  I have two questions:

  • If I install 11.2.0.3 for RDBMS, will I have to install 11.2.0.3 for grid below as well GOLD can also install 11.2.0.1? What is the best approach?
  • Is - this group of patches (for grid below the MOS) above a full install OR I need to install 11.2.0.1 first and then the patch for 11.2.0.3?

  Thank you very much!

  The GI software version must be the same version of the database, or superior - it may not be a lower version. See MOS Doc 337737.1

  HTH
  Srini

• Latitude E6430 - Dell control | Power Manager installs in Win7Pr6 arch - 25025 err

  Hello

  I recently bought a Dell Latiture E6430 refurbiished, who came with win7 pro x 64. As I don't have full trust in the seller, I decided to reinstall the OS from Dell (win7 pro x 64-glb Polish) DVD. Of course the drivers detected for my tag are installed (and updated by "Dell Control |") Updated".

  However, with reinstall it I lost the ability to control the way in which the battery is maintained. If I understand correctly, this must be obtained by "Dell Control | "Power Manager". Before you reinstall, it worked. But this app is not detected for my service tag. I tried to install different versions that were available for this model, including the recent

  System - Utilities_Application_3N7TV_WN32_2.1.0_A00. EXE

  System - Utilities_Application_0X5N4_WN32_2.1.1.EXE

  (w32, but both are theoretically "32-bit executables for 64-bit architecture")

  They only moved it back 25025 (unsupported system) error. Any ideas how to approach this problem?

  I suspect that this isn't a hardware problem, as the management of the battery worked before system reinstall.

  Jesse, thank you very much.

  I followed good order during my first attempt, with a significant exception - I don't have dotnet4/4.5/4.62 installed. Otherwise, the installation failed for ' Dell order | Be able to manage"and of"Dell Feature Enhancement Pack"(I have not installed one on the other, I know that they compete. I tried the latter as the first failure in the manner described - error 25025).

  I drove back to the installation of the provider (backup turned to be useful) just to find out that I have a laptop with DFEP installed, and it is this package that provided control over battery scenarios.

  So with the new installation, I've got dotnet installed, after ' DC | PM"always failed with the error 25025, but installed DFEP ok by" DC | Updated".

  It is now resolved :-)

  TLDR: to get a control over battery scenarios, first install the bios update + chipset + network drivers, and updates of windows including dotnet 4 + 4.5 + updates, then "Dell order | Updated"+ updates detected driver, then in ' DC | Updated"display all updates and install"Dell Feature Enhancement Pack Application".