Control of printing quality of the touchscreen on the MG6320

Similar Questions

• Print quality of the placed PSD files

  Goodmorning,

  We have a database of labels created in Photoshop. When you want to print several of them on larger paperformat, put us in an Indesign file. When we print, small texts come out all fuzzy. When I save the PSD to PDF or EPS and that place in InDesign, the text is much clearer.

  The PSD file consists of layers and the text is all in text layers.

  We use CS6.

  Is there a setting that improves the print quality of the PSD files from any registration as a PDF file is a LOT of work.

  Thanks in advance

  Type in Photoshop is rasterized when saved as PSD or EPS. If you want to keep it as a vector type, save them in PDF format. Does that is not to say that if you open a PSD with live type in Photoshop that the type is no longer the category, but when placed in InDesign, it's raster data if it's a PSD.

  Of course, the real question is why you create labels in Photoshop?

  Moreover, if you have a lot of PSD files you want to convert to PDF, you can do with an action or a droplet and the work will be done very quickly with little effort.

• HP C410a Photosmart Premium: bad printing quality on the picture

  Printer HP Photosmart Premium C410a, just replaced all THE cartridges (genuine HP) - he always tells me cyan and magenta are weak, but the test page printed fine and I cleaned the print heads. When I print a picture (of the program Apple Photos) the ink begins to blurr and run. It is a new problem, all worked well.

  Hello and welcome to the community of HP @BevA1,

  I understand that you encounter some problems print quality when you print pictures of your HP Photosmart Premium C410a. I will do my best to help.

  Below, I've posted a link to a document that offers solutions of troubleshooting on this issue. Please try all the steps in order and get back to me with the results.

  Problems with print quality setting for the HP Photosmart Premium Fax all-in-One Printer Series (C410a C410b, C410c, C410d, C410e)

  If this help will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps and have a nice day.

• Bad print quality with the new cartridge

  I replaced the cartridge on my HP Photosmart c4680 printer a few weeks ago and the print quality looks as if it is low on ink. I followed the instructions on alignment after installation and made sure that I installed the new cartridge. There is no prompt that the ink is low. The other weird thing is sometimes the printer does not start when I turn it on. The screen reads HP and he begins to beep every 10-15 seconds or more. This problem occurs intermittently, but began after the installation of the new cartridge. Would appreciate any help to solve these problems.

  (1) pull the cartridge out and reinsert it, if there is a latch to ensure she fully locking up.

  (2) your HP software for the printer should include several utilities, one such utility is to print a page of 'Test '. Run that usually it will clean the print head.

  http://WWW8.HP.com/h20621/video-gallery/us/en/customer-care/printers-and-all-in-ones/print-a-diagnostic-page/1245169387001/printing-a-test-page---HP-Photosmart-c4795-all-in-one-printer/video/

  Now try printing one of your documents.

  J W Stuart: http://www.pagestart.com

• poor print quality, clean the heads, all ink levels ok,

  printing lines, horizontal, poor quality, some missed lines quality fakes. Cleaned heads, nozzle, all ink levels fine

  Hello Stephenagar,

  What operating system you run on your computer? (Windows 7, Vista or XP?)
  
  
  What is the printer brand and model? (HP, Canon, Brother, etc..)
  
  
  I suggest that you try runing the Microsoft FixIt tool is in the following article:
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Photosmart more B210a no impression and the poor print quality options

  I have a Mac running osx10.9.4 and a connected wireless, B210a printer all-in-one. Everything works well until a recent update that removed all the printing options (color / gray scale / etc. of paper type and print quality)

  The last thing to print very well were some photos in July. Since then whenever I try to print, the black is so fake and colors too bright - almost as if she always strives to pring on photo paper. When we do a re alignment or own heads, prints in black as it should, but every other time, it is terrible. I am a independent and I occasionally print estimates out to customers... but I can't at the moment.

  My son has the same problem with the same printer of his macbook (unknown model / system information)

  Don't know what to do and don't want not throw everything out the window in a fit of anger... Please help!

  Hello

  Welcome to the Forums of HP Support!

  Sorry to hear about the recent issues with the B210a Photosmart on Mac 10.9.4. The printer will copy without any quality problem?

  I would try the following on the Mac;

  1. Reset the printing on Mac system. (Mac OS x: how to reset the printing system)
  2. Repair disk permissions (ignore the statement about 10.7)
  3. Download and install this: v.2.16.1 for OS X HP printer drivers.
  4. Add the printer using print and scan from system preferences.

  Let me know if this helped.

• Best print quality page

  How stop the page "for best print quality, place the page on the glass and press a button to copy" print whenever I turn on printer? It is a waste of ink! I did face it once, as advised. Model HP deskjet 2540. Thank you very much

  Hi bze.

  To ensure high-quality prints, the printer performs an automatic alignment semi process every time you install or replace the cartridges. The product prints a page of alignment in this alignment process. To complete the process, you need to place the page alignment on the glass of the scanner and scan the page. If you don't analyze the alignment page, the continuous product to print an alignment page whenever you turn on or turn off the product until complete you the process of alignment complete .

• C410a Photosmart print quality

  The quality of the printed more than 4 X 6 jpg images have unparalleled picture quality.  Each pass of the print head renders a slightly different picture which is very visible in the pictures with dark backgrounds.  The printer seems to be in harmony with the alignment utility and the «diagnostic print quality report»  The latest software and drivers for MAC OS X 10.8 are installed.  When you print images larger, there is a hesitation of the print head between each of the print head.  Examining the 4 X 6 prints with a magnifying glass does not reveal the failure even on small images.  Any help would be greatly appreciated.

  I was printing directly from the Lightroom software.  The problem has been fixed by changing the settings in the print dialog that appear after clicking on the button "print" in lightroom.  Under "Media and quality", change the type of media affecting the type of photo paper you are using.  Then set the 'quality' for the 'best '.  Good impression to everyone!

• Photosmart 5520 of printing quality

  I recently bought a photosmart 5520. It's my fourth HP printer. So far, I've been more than happy with the HP printers and that's why I've stuck with them.

  I am extremely disappointed by the print quality of the 5520. When you print a document in black Black is almost gray. It just doesn't seem to be enough ink and when printing photo skin tones are not accurate. It seems to be too much red.

  I got a deskjet 2180, which is only a printer not expensive but the quality of the print is much better than the print quality of the 5520.

  I want to know y at - it a setting that I can do to improve the print quality of my 5520 or is it a matter of "what I see, this is what I get.

  Please notify. I await your response.

  Concerning

  Hi, sorry to hear that you are having problems with the print quality. Here is a link with some things you can check.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=5157533&prodTypeId=18972&prodSeriesId=5157533&ObjectID=c03241743

  I hope you find a solution. let you know how you go.

• Unable to select/change a printing quality on Deskjet 5740

  Recently, I lost my ability to print on a DJ 5740 after completing a boot on a Mac G5 iMac, running Mac OS X 10.4.11.  Thinking that somehow secure boot affected/deleted the driver of 5740 DJ, I rebooted the 5740 Driver from the HP website.  After the Driver Install finished, I noticed that the PaperType/quality was not registered iunder the'Copies & Pages drop-down list to select the print quality (e.g. Normal, quick project, etc.).  After reading the Readme Doc DJ 5740, it describes how to get the print quality on the print screen.  The file Readme Doc suggested to disable all functions of picture on the layout, but I have been unable to locate any reference to photographic reports.  Could you please provide a procedure step by step as t what should I look for to turn off the features?

  Hi ther Blazer5,.

  I saw your post not being able to print with your Deskjet 5740. I would recommend to reset the system to see if this helps you bring the print feature.

  This command resets all of the printing system to its default configuration.

  Click here for more details: resetting the system to print on Macintosh OS X 10.4 (Tiger)

  I hope this helps

  Kind regards

• Want to reduce the print quality

  I use a HP OfficeJetPro800n

  The HP software won't let me not normal print quality on one sheet 5 x 7 or 5 x 8. He apparently thinks that I print a photo.

  What should do?

  1. click on start, point to settings, and then click Printers or printers and faxes.
  -Or-
  Click Start, click Control Panel, and then double-click Printers.

  2. right click on the printer icon and then click Properties, default Document, or
  Printing options.
  3. Select the features tab, select paper size (can be in formats of photo), and plain paper, then print quality, then click on apply or OK.

• How can I change the print quality of 72 dpi and 300 dpi?

  When I try to print the image from my library on my printer fate at very low resolution. There is nothing wong with the printer - if I use another program to print the results are perfect. How can I change the resolution settings in Windows 7?

  Hello Robin,.

  Although some applications allow you to change the settings for printing (as parameters of the screen), print quality is generally a function of the properties of the printer. Go to the Control Panel, select devices and printers, then select the printer in question. Right-click on the printer, select Properties, and then look for quality printing or the DPI settings page to change the resolution of your default printer. Once the resolution was increased, Windows will display the new default setting.

  Let me know if this solves the problem for you.

  Kind regards

  BearPup

• HP 2050 j510 series change the print quality options all greyed out help? Project custom quality etc.

  Hi I just installed this printer on an operating system of Windows 7 32 bit, but on the quality of implementation page/impression of two tabs only page layout can be changed all options are greyed out it is deliberate to stop printing in draft print quality or quality options above that this has no sense here that I hadn't bought this printer now as she gobbles up ink and I can't change the print quality at first, I was disappointed that now I would never never buy another printer HP unless HP or someone can help you. Printer is brand new, right out of the box, but HP only support expensive paid as it has been manufactured since more than a year! How bad are only only he registered today for the first time!  Thumbs down for HP!

  Hi charlieelston,

  Follow the instructions below.

  1. open devices and printer

  2. click on add a printer

  3. click Add a local printer

  4. from the use existing port, select the USB option and then click Next

  5. click the button of Windows Update to get all the support window 7 drivers updated

  6. once the update is complete. Click HP from the menu on the left, then select the printer Deskjet 990c in the right menu, and then click Next.

  7. follow the remaining instructions to complete the installation.

  Once you have the printer added 990c make sure it is the default printer, and then try to print using this driver for the Deskjet 3050 printer. I would like to know if you have the same problem?

• HP Pro Plus 6800: error 0 x, 00000057 wireless and wireless Direct properties of the Windows Control Panel printer - print a Test Page

  I have a laptop Toshiba Satellite of Win7 64 bit and a HP 8600 Pro Plus,
  update firmware and drivers about 2 weeks for the 8600 was a
  a long time I have been updated, which is connected wireless has decided to
  Direct to print Wireless Setup once the program installation, I tried to do a windows
  Print the Test Page in the printer property Panel, somewhat normal for
  set up a printer

  Under the connection of the conciergerie, I got the error message 0 x 00000057
  Under wireless direct printing, I got the same error 0 x 00000057

  After spending the time to check the settings, connections and asking
  Why? I decided to see that if I could print the docs, I print a PDF file,
  Notepad and Word documents in each application under the two
  configurations without problem.

  Under the wireless connection, I started the Web Services module
  and was able to make the impression within the Web Services Test page
  module without problem could not yet do the printing Test Page
  in the printer properties panel.

  I ran Print and Scan doctor who, to my surprise mentioned
  a conflict of Driver, I welcomed this program to uninstall the driver,
  went looking upward for the driver and the same driver was so done
  No download but to remove the driver and reinstalled the driver.
  Always error message here.

  I'm now tempted to delete a direct print wireless and see
  What happens if the error disappears, if she does not unstall all
  associated with the printer and do a clean reinstall. In case of emergency
  is there an alternative to the use of the Web Service module to the setting
  When not connected to the wireless network?

  I think that the Panel of the printer would do this (I'll watch this later

  spend enough time on it), or do I need to run Web Services to

  direct wireless installation, just think about this, otherwise I'll shoot

  a usb cable.  Maybe if I install Direct wireless on the printer control panel

  the message will disappear as the installation of the printer program, not software

  on the laptop?

  It is a minor problem since I can still print but question why!

  See other issues about this error message I thought

  spend my experience with this error.

  Always had a number of things to think and try, once again.

  If your getting this error message I would suggest trying a test page printed

  within the module of Web Service to see if the message developed.

  Could not back the driver so I removed the printer driver

  by deleting.

  19/07/2011 Date print driver
  Print driver version 26.0.0.0

  and removed software in Add and Remove software Hp also had to turn

  disable the wireless module directly on the printer to reinstall from the CD.

  Reinstalled printer/software form the CD supplied with the printer, the

  Driver date is 08/12/2009 Ver.9.0.0

  No more error in configuration.

  is the answer to the error message 0 x 00000057 or 0x00000xx

  associated with the driver? Or just the 0 x 00000057?

  Could not find a list of drivers between the driver and

  the driver on the CD.

  Will not update the driver for a good while or until I have too.

  The dates on the drivers are only about two years apart, the

  The version numbers are an issue questable.

• How to restore the print spooler in the printers/faxes folder in Control Panel

  Recently discovered, I can't print because all the information of the printer in my printers and Faxes folder in Control Panel had disappeared.  When I clicked on "Add a printer" it is said "operation could not be performed.  The print spooler service is not running.

  When I tried different ways to study or to restore service, it does not appear that the print spooler service is here, so that no printer can be installed.

  I would like to know how to fix this problem and get the returned printers in service again.

  Help, please!

  Yes, I tried your suggestions.  It was useful, but it didn't completely solve my problem.  The spooler was still missing.

  I think that there is something different going on inside the machine, because other funny things started to happen, alarmed me thinking that there is some hidden virus eating away at the system code!

  I ran MS security scan several times and also McAfee Security Suite.  Security under the full Scan scan found a virus, but it doesn't seem to be the problem after I got Safetly purged, Scan it.  McAfee came up with nothing.

  So, the way I finally solved it my problem was to do a full restore from backup, and if the operating system was restored.  In this way, I know that the functions of the printer will be restored, who he was.

  Sorry did not had time to review all the details that you suggest, but I was running out of time to try too much, so the "faster" was a system restore as the surest way to get rid of all the problems and restore to the original code.

  Thank you, you have been very helpful.