Control of "tab" on the keyboard in the table of Clusters
I'm trying to Polish some of my LabVIEW user interfaces so that my users can work faster in them and so that they follow more "user Windows interface standards" (or other).
I have an array of clusters. The cluster has 3 digits.
When a user "focuses" on the first digital in a cluster and press the tab key, it moves the focus to the second digital. Press tab again, and he climbs to 3rd digital. Hit the tab key a 3rd time and it jumps to the first digital in the cluster. I want to do is for the focus to move to the first digital in the element next to the table.
I started playing with the case "Key Down" event that has a conditional looking for "TAB" and then check the 'FindCtrlWithKeyFocus' with the last digital. My probes in this event show that detection of keys "TAB" works, but the "FindCtrlWithKeyFocus" never invoke a REAL output of the output of "CtrlFound?" of the node.
Even though I didn't know if the tab has been pressed in the last item, I know right how to move the focus to the first digital within the next cluster of the table element.
A table behaves appropriately. I was able to get the program to work as I want with a 2d numerical values table. However, each digital has different data entry parameters and there is also a loss of "free documentation. I would like to find a solution because it came with another, more complex, Bay of clusters that would not be solveable with an array of 2d from a base type.
Seems too complicated for me.
Bonus question: the default my digital is 0. When my user clicks on a digital the cursor is on each side of the value 0 and the user must remove 0 before their seizure. When a number is entered through the Tab key, the entire field is selected. When the whole field is selected, all user entries will replace the '0' original, which has been in the field. In any case, to have all of the selected field when the user uses the mouse?
Sorry for the post wall-of-text (and the hell of the preposition). Thanks for your comments.
and a snippet of code, if it is more useful for some:
Tags: NI Software
Similar Questions
-
HI -.
Here is the configuration:
I have a basic table that has 6 values in there (i.e. the tabs).
The tabs are generated without problem and when I discover things six show. For example:
Video clip: frame = 1 Target = "_level0.tabsMC6"
so it's cool.
Now when I go to configure the action of button for these babies, if I use the _level0.tabs.MC6 so that I can trigger button available for this tab or one if I change the value of tabsMC. What I want to do is to try to reduce the code and have an increase in value of tab, but the best I could achieve is to have the last work in the tab. What is interesting is that if I try an other tabs (1-5) they are all trigger tab #6.
What I have right now is:
function tabCount (): Void {}
for (i = 0; i < _root.slideContainerMC.tabList.length; i ++) {}
_level0 ["tabsMC" + i].clickerMC.onRollOver = function() {}
_level0 ["tabsMC" + i].gotoAndStop("on");
}
}
};(Note: tabList is the picture I mentioned above and Yes, in an another MC, which = code in every sense but I'm in a hurry)
I need guidance is how to get all the tabs for the actions of the individual buttons. I thought that the script above woul have then button actions for
tabsMC1
tabsMC2
tabsMC3
tabsMC4
tabsMC5
tabsMC6
what it does exactly. tabsMC6 is the only tab that will show you the status 'on' - I can ride on one of them, and it's the only tab that says this rather than EACH tab showing a State.
Looks like I'm missing what is obvious!
Thank you!
you define tabMC0,..., tabMC5. If you want tabMC1,..., tabMC6 use:
function tabCount (): Void {}
for (i = 1; i<=_root.slideContainerMC.tabList.length; i++)="">=_root.slideContainerMC.tabList.length;>_level0 ["tabsMC" + i] .ivar = i;
_level0 ["tabsMC" + i].clickerMC.onRollOver = function() {}
This._parent.gotoAndStop("on");
}
_level0 ["tabsMC" + i].clickerMC.onRollOut = function() {}
This._parent.gotoAndStop ("OFF");
}
_level0 ["tabsMC" + i].clickerMC.onRelease = function() {}
This._parent.gotoAndStop ("delivery");
}
}
};and the ivar part provided that you would need the ith tab to know that it is the ith tab. Ivar stores that I have the value used when this particular tabMC was created. If you don't need that, delete it.
-
Convert the appearance of the table of clusters to multicolumn listbox or vice versa
Hi all.
Attached you can see two different controls. On the left side, there is an array of clusters. On the right side, you can find a multicolumn listbox.
Is it possible to change the appearance of each of them to be like others? I mean, is - can I change the appearance of the multicolumn list box to resemble the matrix of clusters (with the same cell border thickness, appearance of the cell, etc.)?, or vice versa?
Furthermore, is it possible to add headers to each column in the table in the clusters? I wrote several headers, but they are separated from the table, just pasted text.
Thank you
Francisco.You can get a lot more close anyway, if not all the way there.
On each field in the cluster, you can right click and replace it with a classic Simple of the string, that is not indented and is similar to designing of listbox. Play and I'm sure you can get very close this flat look of worksheet.
You can probably also use a classic version of the bunch, but if replace you it seems to clear out, so you will need to copy the design of field to another.
/Y
-
Coloring items in the table of clusters
Hello
I have an array of clusters.
My goal is that each element (cluster) in the table will have a different background color.
I tried to use the color property node, but it changed the color of all clusters (not only the desired element).
How is it possible?
(cliché of the attached table)
Thank you
Leonid
Select the color box visit the reorganize (kind of refreshment of the icon, or press Ctrl + J ) and select move to the rear. You are finished.
-
By the way the table of Clusters with binary strings via adapter LabVIEW
I need to go through LabVIEW adapter table clusters containing binary strings.
These data will be subsequently stored in the MySQL database.I need to force the option "Binary string" for the ValBinary element, even if my output array is empty.
Is this possible?
Used versions: TestStand 4.2.1 + LabVIEW 8.6.1
Attached file: valbinary2.vi containing the clusters of test output array.
Howdy Jean-Louis,
My apologies, I'm not quite your question. You're right that LabVIEW does not know that a string is a binary star strong; LabVIEW, chain stores in a format of Pascal, looks like all the strands in the same way. Because TestStand stores strings in the C type format, on the other hand, the null (0x00) characters can be confusing when interpreting strings in TestStand as you learned to understand. That is of course why TestStand offers the feature to interpret strings as binary strings.
As Sylvie refers to his post, to illustrate his point I created within TestSTand an array of the same type of data customized to store past out of your valbinary.vi of test data. Test patterns, I also edited the outputsome constant values to the cluster VI. (See the following screenshot). Note that the last string (named ValBinary) in the cluster contains a hexadecimal string with a null character that is inserted as the 3rd on-screen character (before the actual end of the string).
Here is a screenshot of the created sequence file that calls the VI and then displays the number of items in the table from the VI to the user. Note that the Locals.MyTestData table is empty before the execution of the sequence.
Finally, as the execution of the sequence, I opened the Variables pane to view the contents of the Locals.MyTestData table. Here, I have confirmed that the "binary" string of LV was successfully passed in and stored by TestStand.
Finally, the popup message in the second step of the sequence shows indeed a message indicating there were two elements in Locals.MyTestData.
This sequence has been able to run successfully even without manually specifying a size of Locals.MyTestData beforehand. TestStand dynamically allocated the necessary elements to store the results of test valbinary.vi.
-
entering data in the table of clusters
Hi guys. I have 2 table of the clusters tab. My cluster have elements of different types. I need get referance data entry.
I can do it for a whole picture about the structure of dynamic event but cannot do it for others.
My vi as an attachment.
Can someone help me with the solution?
Thank you.
Kerem
Why don't simply duplicate you the same for table 2? I don't know what is the real problem that you are facing, but duplication worked.
-
type of data entry in the table of clusters
Hi I have 4 table column in the cluster
X Y Z & entry type
X + Y = Z simply
I want to do
When I entered x; cell data type will automatically X (not the numeric value just 'X')
When I entered z; cell data type will automatically Z
Then I can build my algorithm.
How can I do that.
Thank you.
-
Visible data in a 2D table but not in the Table connected control
In the attached drawing, you will see that I take control of Table in table form, change the items to help replace a subset of table and then return the resulting table in the Table control.
I can see my data in "Table of output" and a probe on this thread, but my Table control is empty. The Table control is 10 columns of 50 lines.
Can someone tell me why there is no data for the Table control?
Please do not ask I post the VI because it is big, ugly and not mine to post.
I can't believe.
I couldn't see the data because it was out-of-frame. My Control Panel flashed down a 30 line window and my data was in the first line only.
-
Single SQL query for the analysis of the date of customs declaration under the table of Stock codes
Dear all,
Please tell us a single SQL query for the below,
We have a Table of Stock as shown below,
STOCK_TABLE
ITEM_CODE
(item code)
BAT_NO
(lot no.)
TXN_CODE
(transaction code)
DOC_NO
(number)
BOE_DT
(date of the customs declaration)
I1
B1
I1
I2
I3
B70
I4
B80
I5
B90
T102
1234
JULY 2, 2015
I6
B100
We have to find the date of customs declaration (i.e. the date when the items have come under this particular table) for items that are not attached to any document (that is, who have TXN_CODE, DOC_NO and BOE_DT fields with a NULL value).
For each item in the table of actions, which is not attached to any document, the customs declaration date is calculated as follows.
- If (code section, lot number) combination is present under HISTORY_TABLE, the date of customs declaration will receive the UPDT_DT, the transaction code (TXN_CODE) is an IN or transactions (which can be analyzed from the TRANSACTIONS table).
- If (code section, lot number) combination is NOT currently at the HISTORY_TABLE (or) the transaction code respective to item - batch number combination code is an operation then customs declaration date will be the date of the document (DOC_DT) that we receive from one of the 3 tables IN_TABLE_HEAD that contains the element of that particular lot.
- If the case 1 and case 2 fails, our customs declaration date will be the last date of document (DOC_DT) that we receive from one of the 3 tables IN_TABLE_HEAD containing that particular item and the BAT_NO in expected results will be that corresponding to this document, as appropriate, to another NULL.
- If the case 1 or case 2 is successful, the value of the last field (in the output expected, shown further below) BATCH_YN will be 'Y', because it fits the lot. Otherwise it will be 'n'.
-
Y at - it a keyboard shortcut for "close all tabs in the right" and "close other tabs" actions? Thank you.
As far as I know that there is no shortcut pre-defined for this task. You can always check for the shortcut available in this list: hotkeys - quickly perform common tasks of Firefox
However, you can set your own shortcut using this addons: https://addons.mozilla.org/en-US/firefox/addon/customizable-shortcuts/
-
According to http://support.mozilla.com/en-us/kb/keyboard+shortcuts,.
'Ctrl + End' should move the active tab to the end of the list of tabs.But the shortcut does not work. Only, it scrolls to the end of the current page as if only "End" is pressed.
I tried the mode without failure of firefox and closed all other open programs.
What to do to debug this problem?
or may there is a bug in firefox somehow?See the post of dao in this MozillaZine forum thread: http://forums.mozillazine.org/viewtopic.php?f=23 & t = 1304895
Add code to userChrome.css below @namespace.
See http://kb.mozillazine.org/Editing_configuration#How_to_edit_configuration_files
@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */ .tabbrowser-tab[selected="true"] {-moz-user-focus: normal !important;}
-
Hi all
I found in aid and other messages that you put inside the tab order a tab control by clicking with the right button on the page and selected redorder controls in the page.
I'm using Labview 8.0 and for the life of me I can't get this to work. I clicked everywhere: places within the tab governed, on the page tab on the label, on the legend, on the label, etc. and I can't get the menu to appear.
Anyone know the problem?
Hi abeaver,
I could find to rearrange controls on the Page in LabVIEW 8 on a page of specific tabs by right-clicking its edge. You have several controls on the page for the menu option is displayed (ie. it is not there if there is one or none of the controls on the specific page you want to rearrange):
As regards the order of tabs when running when you have a tab control, you will have to use the arrow keys to navigate between the specific tabs in the tab control when it is selected (you cannot use the tab key). This is explained with more information here:
http://digital.NI.com/public.nsf/allkb/C050233A993F14F88625698E007EB082
I hope that helps!
-
Tab control: all objects in different tabs of the line
I have a tab with 6 tabs control. Each tab has exactly the same things: two graphics and digital indicator. I want the objects on each tab of too each other perfectly. When the user moves from page to page, I do not want the user to see any movement due to a misalignment of the objects among the tabs. What is the best way? Thank you!
Create a property for each element node and copy the Position of one of the indicators to all other indicators of the same type.
See attachment.
You can also use an array of clusters instead of a tab control. Put the graphics and digital indicators in a cluster. Put them in a table. Only display a single element of the array at the same time, but the table control allows to change is visible.
This will probably make your code simpler and more logical also.
-
Change the shortcut tab of the controls
Is there a way to change the shortcut tab in the Enter key, instead of using the Tab key? And it is possible to set the tab order of controls?
Thank you
Chris
I would advise against using tab for navigation has been standardized for a long time. But you can use the button Down? event filter in an event structure to change a behavior of keys. Specifically if someone hits the identification key 9 by Char and ASCII for Vcleentry. You can also use this to disable the tab key.
-
I can't get the automatic updates to enable secutiy tab in the control panel.
I can't get the automatic updates to enable secutiy tab in the control panel. There are propmts me to light them mannualy in systems that they tab already, but they do not always allow me to turn on the automatic updates on the Security tab. I don't see the yellow shield appearing at the bottom RHS of the screen more updated? someone know why?
YAY. I got it fixed. I had to reinstall the automatic updates service and everything works. All updates now came through windows and the Security Center has all the lights GREEN.
HISTORY_TABLE
ITEM_CODE | BAT_NO |
TXN_CODE
DOC_NO
UPDT_DT
I1
B1
T1
1234
JANUARY 3, 2015
I1
B20
T20
4567
MARCH 3, 2015
I1
B30
T30
7890
FEBRUARY 5, 2015
I2
B40
T20
1234
JANUARY 1, 2015
TRANSACTION
TXN_CODE | TXN_TYPE |
T1 | IN |
T20 |
OFF
T30
ALL THE
T50
IN
T80
IN
T90
IN
T60
ALL THE
T70
ALL THE
T40
ALL THE
IN_TABLE_HEAD_1
H1_SYS_ID (primary key) | TXN_CODE | DOC_NO |
DOC_DATE
H1ID1
T1
1234
JANUARY 1, 2015
H1ID2
T70
1234
FEBRUARY 1, 2015
IN_TABLE_ITEM_1
I1_SYS_ID |
H1_SYS_ID
(foreign key referencing H1_SYS_ID in IN_TABLE_HEAD_1)
ITEM_CODE
I1ID1
H1ID1
I1
I1ID2
H1ID1
I100
I1ID3
H1ID2
I3
IN_TABLE_BATCH_1
B1_SYS_ID | TXN_CODE DOC_NO (now in IN_TABLE_HEAD_1) | BAT_NO |
B1ID1
T1
1234
B1 / can be empty
B1ID2
T70
1234
B70
IN_TABLE_HEAD_2
H2_SYS_ID (primary key) | TXN_CODE |
DOC_NO
DOC_DATE
H2ID1
T30
4567
FEBRUARY 3, 2015
H2ID2
T60
1234
JANUARY 3, 2015
IN_TABLE_ITEM_2
I2_SYS_ID | H2_SYS_ID (foreign key referencing H2_SYS_ID in IN_TABLE_HEAD_2) | ITEM_CODE |
I2ID1 | H2ID1 |
I1
I2ID2
H2ID1
I200
I2ID3
H2ID2
I2
IN_TABLE_BATCH_2
B2_SYS_ID |
I2_SYS_ID
(foreign key referencing I2_SYS_ID in IN_TABLE_ITEM_2)
BAT_NO
B2ID1
I2ID1
B30 / null
B2ID2
I2ID2
B90
B2ID2
I2ID3
B60
IN_TABLE_HEAD_3
H3_SYS_ID (primary key) | TXN_CODE | DOC_NO | DOC_DATE |
H3ID1 |
T50
1234
JANUARY 2, 2015
H3ID2
T80
1234
JANUARY 3, 2015
H3ID3
T90
1234
JANUARY 4, 2015
H3ID4
T40
1234
AUGUST 5, 2015
IN_TABLE_ITEM_3
I3_SYS_ID |
H3_SYS_ID
(foreign key referencing H3_SYS_ID in IN_TABLE_HEAD_3)
ITEM_CODE
BAT_NO
I3ID1
H31D1
I2
B50
I3ID2
H3ID2
I4
B40
I3ID3
H3ID3
I4
I3ID4
H3ID4
I6
There is no IN_TABLE_BATCH_3
Please find below the expected results.
OUTPUT
ITEM_CODE | BAT_NO | TXN_CODE | DOC_NO |
BOE_DT
BATCH_YN
I1
B1
T1
1234
JANUARY 3, 2015
THERE
I1
B30
T30
7890
FEBRUARY 5, 2015
N
I2
B60
T60
1234
JANUARY 3, 2015
N
I3
B70
T70
1234
FEBRUARY 1, 2015
THERE
I4
T90
1234
JANUARY 4, 2015
N
I6
T40
1234
AUGUST 5, 2015
N
Controls database to create the tables above and insert the records.
CREATE TABLE stock_table()item_code VARCHAR2()80),bat_no VARCHAR2()80),txn_code VARCHAR2()80),
doc_no VARCHAR2 (80), boe_dt DATE );
INSERT EN stock_table
VALUES ('I1', 'B1', '', '', '');
INSERT EN stock_table
VALUES ('I1', '', '', '', '');
INSERT IN stock_table
VALUES ('I2', '', '', '', '');
INSERT EN stock_table
VALUES ('I3', 'B70', '', '', '');
INSERT EN stock_table
VALUES ('I4', 'B80', '', '', '');
INSERT EN stock_table
VALUES ('I5', 'B90', 'T102', '1234', '02-JUL-2015');
INSERT EN stock_table
VALUES ('I6', 'B100', '', '', '');
SELECT *
FROM stock_table
CREATE TABLE history_table()item_code VARCHAR2()80),bat_no VARCHAR2()80),txn_code VARCHAR2()80),
doc_no VARCHAR2 (80), updt_dt DATE );
INSERT IN history_table
VALUES ('I1', 'B1', 'T1', '1234', '03-JAN-2015');
INSERT IN history_table
VALUES ('I1', 'B20', 'T20', '4567', '03-MAR-2015');
INSERT IN history_table
VALUES ('I1', 'B30', 'T30', '7890', '05-FEB-2015');
INSERT IN history_table
VALUES ('I2', 'B40', 'T20', '1234', '01-JAN-2015');
SELECT *
FROM history_table
CREATE TABLE transaction1()txn_code VARCHAR()80),txn_type VARCHAR()80));
INSERT INTO transaction1
VALUES ('T1', 'IN');
INSERT INTO transaction1
VALUES ('T20', 'OUT');
INSERT INTO transaction1
VALUES ('T30', 'ALL');
INSERT INTO transaction1
VALUES ('T40', 'ALL');
INSERT INTO transaction1
VALUES ('T50', 'IN');
INSERT INTO transaction1
VALUES ('T60', 'ALL');
INSERT INTO transaction1
VALUES ('T70', 'ALL');
INSERT INTO transaction1
VALUES ('T80', 'IN');
INSERT INTO transaction1
VALUES ('T90', 'IN');
SELECT *
FROM transaction1
CREATE TABLE in_table_head_1()h1_sys_id VARCHAR2()80) PRIMARY KEY,txn_code VARCHAR2()80),
doc_no VARCHAR2 (80), doc_dt DATE );
CREATE TABLE in_table_head_2()h2_sys_id VARCHAR2()80) PRIMARY KEY,txn_code VARCHAR2()80),
doc_no VARCHAR2 (80), doc_dt DATE );
CREATE TABLE in_table_head_3()h3_sys_id VARCHAR2()80) PRIMARY KEY,txn_code VARCHAR2()80),
doc_no VARCHAR2 (80), doc_dt DATE );
INSERT IN in_table_head_1
VALUES ('H1ID1', 'T1', '1234', '01-JAN-2015');
INSERT IN in_table_head_1
VALUES ('H1ID2', 'T70', '1234', '01-FEB-2015');
INSERT IN in_table_head_2
VALUES ('H2ID1', 'T30', '4567', '03-FEB-2015');
INSERT IN in_table_head_2
VALUES ('H2ID2', 'T60', '1234', '03-JAN-2015');
INSERT IN in_table_head_3
VALUES ('H3ID1', 'T50', '1234', '02-JAN-2015');
INSERT IN in_table_head_3
VALUES ('H3ID2', 'T80', '1234', '03-JAN-2015');
INSERT IN in_table_head_3
VALUES ('H3ID3', 'T90', '1234', '05-JAN-2015');
INSERT IN in_table_head_3
VALUES ('H3ID4', 'T40', '1234', '05-AUG-2015');
CREATE TABLE in_table_item_1()i1_sys_id VARCHAR2()80) PRIMARY KEY,
h1_sys_id VARCHAR2 (80) REFERENCES in_table_head_1()h1_sys_id),item_code VARCHAR2()80));
CREATE TABLE in_table_item_2()i2_sys_id VARCHAR2()80) PRIMARY KEY,
h2_sys_id VARCHAR2 (80) REFERENCES in_table_head_2()h2_sys_id),item_code VARCHAR2()80));
CREATE TABLE in_table_item_3(i3_sys_id VARCHAR2(80) PRIMARY KEY,
h3_sys_id VARCHAR2 (80) REFERENCES in_table_head_3()h3_sys_id),item_code VARCHAR2()80),
bat_no VARCHAR2 (80));
INSERT IN in_table_item_1
VALUES ('I1ID1', 'H1ID1', 'I1');
INSERT IN in_table_item_1
VALUES ('I1ID2', 'H1ID1', 'I100');
INSERT IN in_table_item_1
VALUES ('I1ID3', 'H1ID2', 'I3');
INSERT IN in_table_item_2
VALUES ('I2ID1', 'H2ID1', 'I1');
INSERT IN in_table_item_2
VALUES ('I2ID2', 'H2ID1', 'I200');
INSERT IN in_table_item_2
VALUES ('I2ID3', 'H2ID2', 'I2');
INSERT IN in_table_item_3
VALUES ('I3ID1', 'H3ID1', 'I2','B50');
INSERT IN in_table_item_3
VALUES ('I3ID2', 'H3ID2', 'I4','B40');
INSERT IN in_table_item_3
VALUES ('I3ID3', 'H3ID3', 'I4','');
INSERT IN in_table_item_3
VALUES ('I3ID4', 'H3ID4', 'I6','');
SELECT *
FROM in_table_item_1
SELECT *
FROM in_table_item_2
SELECT *
FROM in_table_item_3
CREATE TABLE in_table_batch_1()b1_sys_id VARCHAR2()80) PRIMARY KEY,
txn_code VARCHAR2 (80), doc_no VARCHAR2 (80), bat_no VARCHAR2 (80));
CREATE TABLE in_table_batch_2()b2_sys_id VARCHAR2()80) PRIMARY KEY,
i2_sys_id VARCHAR2 (80) REFERENCES in_table_item_2()i2_sys_id),bat_no VARCHAR2()80));
INSERT IN in_table_batch_1
VALUES ('B1ID1', 'T1', '1234', 'B1');
INSERT IN in_table_batch_1
VALUES ('B1ID2', 'T70', '1234', 'B70');
INSERT IN in_table_batch_2
VALUES ('B2ID1', 'I2ID1', 'B30');
INSERT IN in_table_batch_2
VALUES ('B2ID2', 'I2ID2', 'B90');
INSERT IN in_table_batch_2
VALUES ('B2ID3', 'I2ID3', 'B60');
Please advise a solution for the same.
Thank you and best regards,
Séverine Suresh
very forced (question subfactoring used to allow easy testing/verification - could work with these test data only)
with
case_1 as
(select s.item_code,
s.bat_no,
h.txn_code,
h.doc_no,
h.updt_dt boe_dt,
cases where s.bat_no = h.bat_no then 'Y' else ' n end batch_yn.
cases where h.txn_code is not null
and h.doc_no is not null
and h.updt_dt is not null
then 'case 1' '.
end refers_to
from (select item_code, bat_no, txn_code, doc_no, boe_dt
of w_stock_table
where bat_no is null
or txn_code is null
or doc_no is null
or boe_dt is null
) s
left outer join
w_history_table h
On s.item_code = h.item_code
and s.bat_no = h.bat_no
and exists (select null
of w_transaction1
where txn_code = nvl (s.txn_code, h.txn_code)
and txn_type in ('IN', 'ALL')
)
),
case_2 as
(select s.item_code,
NVL (s.bat_no, h.bat_no) bat_no.
NVL (s.txn_code, h.txn_code) txn_code.
NVL (s.doc_no, h.doc_no) doc_no.
NVL (s.boe_dt, h.updt_dt) updt_dt.
cases where s.bat_no = h.bat_no then 'Y' else ' n end batch_yn.
cases where h.txn_code is not null
and h.doc_no is not null
and h.updt_dt is not null
then 'case 2'.
end refers_to
from (select item_code, bat_no, txn_code, doc_no, boe_dt
of case_1
where refers_to is null
) s
left outer join
w_history_table h
On s.item_code = h.item_code
and exists (select null
of w_transaction1
where txn_code = nvl (s.txn_code, h.txn_code)
and txn_type in ('IN', 'ALL')
)
and not exists (select null
of case_1
where item_code = h.item_code
and bat_no = h.bat_no
and txn_code = h.txn_code
and doc_no = h.doc_no
and updt_dt = h.updt_dt
)
),
case_31 as
(select s1.item_code,
NVL (S1.bat_no, W1.bat_no) bat_no.
NVL (S1.txn_code, W1.txn_code) txn_code.
NVL (S1.doc_no, W1.doc_no) doc_no.
NVL (S1.updt_dt, W1.doc_dt) updt_dt.
cases where s1.bat_no = w1.bat_no then 'Y' else ' n end batch_yn.
cases where w1.txn_code is not null
and w1.doc_no is not null
and w1.doc_dt is not null
then "case 31'.
end refers_to
from (select item_code, bat_no, txn_code, doc_no, updt_dt, batch_yn, refers_to
of case_2
where refers_to is null
) s1
left outer join
(select i1.item_code, h1.txn_code, h1.doc_no, h1.doc_dt, b1.bat_no
of w_in_table_item_1 i1
inner join
w_in_table_head_1 h1
On i1.h1_sys_id = h1.h1_sys_id
inner join
w_in_table_batch_1 b1
On h1.txn_code = b1.txn_code
and h1.doc_no = b1.doc_no
) w1
On s1.item_code = w1.item_code
),
case_32 as
(select s2.item_code,
NVL (S2.bat_no, W2.bat_no) bat_no.
NVL (S2.txn_code, W2.txn_code) txn_code.
NVL (S2.doc_no, W2.doc_no) doc_no.
NVL (S2.updt_dt, W2.doc_dt) updt_dt.
cases where s2.bat_no = w2.bat_no then 'Y' else ' n end batch_yn.
cases where w2.txn_code is not null
and w2.doc_no is not null
and w2.doc_dt is not null
then "case 32'.
end refers_to
from (select item_code, bat_no, txn_code, doc_no, updt_dt, batch_yn, refers_to
of case_2
where refers_to is null
) s2
left outer join
(select i2.item_code, h2.txn_code, h2.doc_no, h2.doc_dt, b2.bat_no
of w_in_table_item_2 i2
inner join
w_in_table_head_2 h2
On i2.h2_sys_id = h2.h2_sys_id
inner join
w_in_table_batch_2 b2
On i2.i2_sys_id = b2.i2_sys_id
) w2
On s2.item_code = w2.item_code
),
case_33 as
(select s3.item_code,
w3.bat_no,
NVL (S3.txn_code, w3.txn_code) txn_code.
NVL (S3.doc_no, w3.doc_no) doc_no.
NVL (S3.updt_dt, w3.doc_dt) updt_dt.
cases where s3.bat_no = w3.bat_no then 'Y' else ' n end batch_yn.
cases where w3.txn_code is not null
and w3.doc_no is not null
and w3.doc_dt is not null
then "case 33'.
end refers_to
from (select item_code, bat_no, txn_code, doc_no, updt_dt, batch_yn, refers_to
of case_2
where refers_to is null
) s3
left outer join
(select i3.item_code, h3.txn_code, h3.doc_no, h3.doc_dt, i3.bat_no
of w_in_table_item_3 i3
inner join
w_in_table_head_3 h3
On i3.h3_sys_id = h3.h3_sys_id
) w3
On s3.item_code = w3.item_code
)
Select item_code, bat_no, txn_code, doc_no, boe_dt, batch_yn
of case_1
where refers_to is not null
Union of all the
Select item_code, bat_no, txn_code, doc_no, updt_dt, batch_yn
of case_2
where refers_to is not null
Union of all the
Select item_code, bat_no, txn_code, doc_no, updt_dt, batch_yn
from (select item_code, bat_no, txn_code, doc_no, updt_dt, batch_yn,
ROW_NUMBER() over (partition by item_code of updt_dt desc order) rn
from (select item_code, bat_no, txn_code, doc_no, updt_dt, batch_yn
of case_31
where refers_to is not null
Union of all the
Select item_code, bat_no, txn_code, doc_no, updt_dt, batch_yn
of case_32
where refers_to is not null
Union of all the
Select item_code, bat_no, txn_code, doc_no, updt_dt, batch_yn
of case_33
where refers_to is not null
)
)
where rn = 1
ITEM_CODE | BAT_NO | TXN_CODE | DOC_NO | BOE_DT | BATCH_YN |
---|---|---|---|---|---|
I1 | B1 | T1 | 1234 | JANUARY 3, 2015 | THERE |
I1 | B30 | T30 | 7890 | FEBRUARY 5, 2015 | N |
I2 | B60 | T60 | 1234 | JANUARY 3, 2015 | N |
I3 | B70 | T70 | 1234 | FEBRUARY 1, 2015 | THERE |
I4 | - | T90 | 1234 | JANUARY 5, 2015 | N |
I6 | - | T40 | 1234 | AUGUST 5, 2015 | N |
Concerning
Etbin
Maybe you are looking for
-
I'm not able to remove 1 inch gap, which came just after the installation of google toolbar. After that, I uninstalled Google Toolbar and Firefox respectively and there still, installed Firefox only, but the gap of 1 inch (1 row) remains just below t
-
Satellite A100 Toshiba controls program - TFncKy.exe
Hi all I hope I can get help from the genius here. My model is Satellite A100 and it comes with the media next to the keyboard button (i.e.Open, Internet browser, open WMP 10, Play/Pause, Stop, etc.). However I face the problem that all of these butt
-
WXP MCE 2005 does not start after Windows update on Satellite P100-240
After the restart, following an automatic update windows laptop will not continue to boot, all that happens is that you get the Welcome to Windows XP Home edition screen, HARD drive activity, then a white with an arrow cursor screen and then the HARD
-
Window update for Vista didn't and now it stops when I use all the features.
I did my update for Vista window and now it stops when I use all the features. I use Google Chrome and the recent update adds Bing Bar.
-
Blue screen of death now very slow internet
I get a screen blue of death for a few months now, but never really sorted due to other commitiments, and also, it would be just blue screen flash and then restart automatically. I have not configured until recently to disable automatic reboot, but m