Control of the E4407B Spectrum Analyzer

Hi all

I was using E4407B made by the company Agilent spectrum analyzers.

Also, I designed the LabView program to control the E4407B.

But it occurred to me a few question.

Once I connect E4407B to the LabVIEW program, I couldn't control the E4407B manually until I got disabling it and turn it on.

Please let me know how E4407B manually control while I connect E4407B to the LabVIEW program.

Kind regards

Kwangbog ham

NURI Telecom

Material engineer/Assistant Manager

Electric bike seems like overkill. It is not a button for local or remote? Read the manual for the manual method.

To do this programmatically, you can try the command GTL or deasserting REN. Either is done with the function of VISA CRTAP control REN.

Tags: NI Software

Similar Questions

  • ID of the query for HP8562A Spectrum Analyzer

    Hello

    I'm just having some difficulty in communicating with my the HP8562A Spectrum Analyzer. I tried to send the query "* IDN?" but he cannot read (probably due to the age of the parser). I look around the Query Analyzer can understand but have had no luck so far. If anyone has had experience with this instrument and communicate with him using GPIB, any help would be greatly appreciated.

    See you soon.

    Try again with ' ID? (no * and no N)

  • Search drivers for Spectrum Analyzer ifr2399

    you want to perform a test, labview order.
    But I have a problem, I do not have drivers to control which references IFR2399 Spectrum Analyzer. I see on the site (national instruments) but no driver it offers is not good, because it's in LabWindows/CVI and get drivers in labview.

    I found sulution,

    http://sine.NI.com/apps/UTF8/niid_web_display.download_page?p_id_guid=8A579A0E26853B57E04400144FB7D2...

  • Remote Control GPIB for R & S to set FSL Spectrum Analyzer "RF expected low distortion.

    Hi all

    Anyone know what is GPIB remote command for R & S FSL Spectrum Analyzer set the softkey "RF expected low distortion" (found in the SOUL-> Ampt->)?

    The operating instructions on page 200 (page to the menu where you see this button) is not this remote control

    Thanks for the help


  • Spectrum Analyzer (Keysight PXA) get the Trace using the binary format

    1. The ASCII format uses drivers. I need binary format. Number of points and many traces.

    2. This topic in several positions, but do not give a good answer.

    3. I have attaced my code.

    4. Visa to read data from binary block. VI has been lifted to another post, but I can't find it to give credit.

    5. Array of bytes to trace.vi has default data that are extracted from my PXA Spectrum Analyzer. I stole the basic idea, but there is much prettier. To convert the 8-byte doubles, but it doesn't.

    6. Because I use Windows I use ': FORM:TRACATA %s;: FORM:BORD SWAP; "where %s is real, 64 for the binary data. Don't know if the SWAP is required.

    7. I have a general idea of how it works, but the details elude me. MSB, LSB exchanged and normal. My eyes is glazed.

    Thanks for any help is good.

    Norm

    Try this. It works well for me.

  • wanted to know on how to use labview to get the values of the Spectrum Analyzer?

    Hi all

    I am a new Member and I am doing a project I have to see the performance of the DSl cable (lasting different for example 100 m, 200 m) on the Analyzer of spectrum and its values as graphic, food, BW should be get in excel sheet. I the company Rohde and Schwarz Spectrum Analyzer, I use interface GPIB 82357 B Agilent... If anyone can help me how to start. I plugged GPIB to spectrum and its drivers on the computer...

    Thanks in advance

    Patricia

    @Dennis Knutson

    I did not choose, he gave to me... and I have to work use only... no other choice...

  • Error on the screen of the Spectrum Analyzer "interrupt request".

    Hi all

    First of all sorry I originally posted this message in the wrong place...

    I want to make a screenshot for ESA series Spectrum Analyzer. I make a screenshot, but still not even the current. If and only if I do not use MMEMEL function after reading binary data under vi I screenshot, but not the current one. And if I use the function MMEMEL then I get blank screen capture. And on the screen of the spectrum I always get message that INTERRUPTED the query and error output, I get attention. I don't know what to do these things happened... I'll be very happy if someone help me with this...

    Thanks in advance...

    Pals

    I don't know if it's important, but the 'PSA Screen Capture via GPIB1' VI you downloaded is looking for the Subvi "VISA Read block of binary data", but you have downloaded "VISA read binary block given to file1. What is the difference?

    The reason of the error of REQUEST INTERRUPTED, is you issue one * OPC? command, but never read the answer. This command causes the parser to return a 1 after the command is completed. You never read it. Thus, the Analyzer complains, as it should.

  • How to capture a .gif of a spectrum analyzer file and save the file in PC

    I want to capture a .gif from a spectrum analyzer file and save the file to the PC, but I have a problem when reading data from the instrument. I don't know how to format the string has obtained from the instrument, when I use '%s' or '%t' as string format to read the data from the instrument is truncated.

    my code are, could someone tell me where I'm wrong?

    char resultsArray [5000];

    viPrintf (hSpectrumInstr, ": MMEMTORCR ' CIMAGE.") GIF "\n"); "
    viQueryf (hSpectrumInstr, ": MMEMATA? '") CIMAGE. (' GIF'\n ', '%t', resultsArray);
    printf ("%s", resultsArray);
    GetChar ();

    as you can see your code is not readable, can you post a screenshot or, as before, a Word document?

    When you use "%b" table must be of type ViInt8

  • Reading / writing to the HP 8562 A of Labview with GPIB Spectrum Analyzer.

    Hello

    My requirement is to send commands to Labview (in string format) of the Analyzer of spectrum HP 8562 (SA) and read the output of the SA, and write it to a text file. To use interface is GPIB. I have no prior experience in Labview and I'm pressed for time, within a close period. The HP 8562 A Spectrum Analyzer is an obsolete model.

    Any help will be most appreciated.

    Mohan

    Hi Dennis,

    I had the Instrument i/o Assistant to talk to HP 8562 A. But I was able to write a simple with VISA Open, read, write and close program screws to read the instructions and write to a file.

    Thanks for the help.

    Concerning

    M.R.

  • Optical Spectrum Analyzer

    Hi all

    I have problems relating to the control of optical spectrum
    Analyzer of... I followed exactly the commands in the programming but user guide
    It turns out that a lot of mistakes. Yes, is there anyone here have some
    experiences with controller OSA? Could you help me?

    Thank all

    For the ID? and * IDN command, it returns the display name. Other commands does not work

    But it is strange that when I connect GPIB instruments (OSA), two devices are analyzed (display HP7004A, another (HP 70952 (B) is not recognized/responsed). It may be the source of error when writing the commands to the instruments.

    In fact, when you use MAX, I chose HP70004A to connect. I do not know how other assets.

  • Data storage of the optical spectrum for several points and recalling a specific

    Hi, I'm working on an installation of measurement of the optical spectrum automated for a summer project, I have been using labview for about a week now and have had bases for stage motor control, but I have problems with the data management...

    I'm looking to store data such as those acquired with an optical spectrum for several XY points Analyzer and recall the optical spectrum for a specified point? Currently, I am looking at writing to the file of measure and reading of the measures such as the options file, but I'm not sure how to name each piece and the data and to recall them correctly. Are there examples where this has been done? any help will be greatly appreciated.

    I use a connect Yokogawa AQ6370 via ethernet, LabVIEW drivers are provided for this, but I can't find the screws provided here is

    Thank you very much

    Asiri

    Not clear? Ask at your

  • Spectrum Analyzer?

    Hi all

    I am looking to invest in a DAW for audio work (obviously), but I'm torn between Logic Pro X and Adobe Audition CC. I'm not a fan of the Adobe subscription model so I would invest in LPX, but the problem is that I can't find the function that I need.

    Adobe Audition CC has a Spectrum Analyzer and allows me to eliminate noise from my soundscapes, but I can't find the feature in LPX. Y at - it to download a plugin or a way to do this? I don't do music production, I am more than a sound designer for the theater and cinema and use recorded sounds so clean and restore is more what I'm looking for. I am rather new to this and would like any input you can provide.

    Thank you!

    I've been a user of the logic for many years, but I use Izotope RX as a plug-in (s) in the logic for a serious cleanup work.

    https://www.iZotope.com/en/products/repair-and-edit/Rx.html

  • OR PCI-5640R serving of real-time Spectrum Analyzer

    Hello

    The code for the demo of the real-time Spectrum Analyzer real NI SMU-5641R is shown HERE for LV 2009. I want to use the same code for NI PCI-5640R NI SMU-5641R instead. Since I'm on a 5640R, I changed the device in the project.

    Can someone guide me what else I need to do in this demo code so that I can use the same code for the NI PCI-5640R
    instead of the SMU-5641R NI?

    Thank you and best regards,

    Rashid

    Hello r,.

    Since you have not mentioned I guess that you do not have NI 5600. Therefore, to make this example work, you will need NEITHER 5600 buck frequency converter and driver of DAMA. NEITHER 5640R serves only as a digitizer in this case.  Also note that the 5600 is the resource name hardcoded in the program, so if you have OR 5600, you can either rename in 5600 Max or change the name of the resource in code for matching a max. You also need re 5600 NOR as a DAA, so so right click on 5600 OR in select Properties MAX and select external under scanner. All should be good as long as you recomplie the project to create a new file of ILO.

    Thank you

    NOR-khil

  • Output power of the frequency spectrum

    Hello

    I have a pretty simple question. I m using the power spectrum of FFT and PSD vi. and have trouble understand output frequencies. If I understand the first line is DC-value and delta frequency then describe the following frequencies. But when I put for example in 8 points say sampling frequency of 4 Hz = 2 seconds of data to analyze, I'll be back 4 lines of data (including 0). If the first is DC, then the 2nd should be 1 / 2 Hz 1 Hz = 3rd place and 4th place = 3 / 2 Hz, but what about the frequency of 2 Hz Nyquist, why Don t I get this one? or is there something I don't understand?

    I also tried the example of Units.vi of FFT spectrum and can understand, but I still Don t get it.

    Help, please!

    Best

    Jesper

    FFT returns to power in frequency bins. The frequency of the bins is determined by the Fs (sampling frequency) divided by N (number of points), from DC (0Hz). For your case, the table returned would be:

    Bin 0: 0-0.5 Hz

    Bin 1: 0, 5 - 1 Hz

    Tray 2: 1-1.5 Hz

    Bin 3: 1.5 - 2 Hz

    So effectively Bin 3 holds the power of 1.5 to 2 Hz (which contains your Nyquist frequency).

  • Weird problem with control of the ring and foot

    So I have some sort of weird issue with a control of the ring and a chart. I'm with LabWindows/CVI on a Windows 7 computer. The part of the program I'm looking at is basically to navigate through data - there are several "transition" (rehearsals experience), and you can choose the one that you want to watch in the list.

    Normally, you would select transitional in the list, it plots the data, then it is done, basically. However, all of a sudden (don't know how long it spent for), when I select anything except 'Average', he made all the tracing and such, then it changes control of the ring to 'Average' (it is not plot the average data or generate all the reminders that I can tell).

    Now the thing the more bizarre as you can see below, it seems that the switch happens just when I draw something on the chart:

     

    So, it's just weird. The code in this section is here:

       if(uidc.polyon) {
                polynomial_subtraction(curr_data, np, uidc.polyord, 0); // 0 Skip for now
            }
    
            // Scale the curr_data for gains, then pre-scale the FFT data
            // to have no change in the power spectrum (multiply by (2/np)
            for(j = 0; j < np; j++) {
                fft_data[j] = curr_data[j]*2/np;
                curr_data[j] = curr_data[j]*uidc.fgain[i] + uidc.foff[i];
            }
    
            uidc.fplotids[i] = PlotY(dc.fid, dc.fgraph, curr_data, np, VAL_DOUBLE, VAL_THIN_LINE, VAL_NO_POINT, VAL_SOLID, 1, uidc.fchans[i]?uidc.fcol[i]:VAL_TRANSPARENT);
    
            // Prepare the data.
            FFTEx(fft_data, np, npfft, NULL, FALSE, curr_fft);  // Do the fourier transform
    

    DC is a structure that I use to better organize some UI controls and uidc is for display RAM variables, then dc.fid is the Panel that is embedded in the tab "FID", dc.fgraph = FID_Graph and corresponds to the chart control. Control of the ring is actually in a child Panel, dc.cloc [0]. FID_Graph has a point, it can produce, but the reminder is empty (no not coded something there yet).

    I have also considered that perhaps something in another thread (I don't think there is, but whatever) I see is the cause, however, this behavior still happens on that line. I tried to break in different locations, on hold, then continues, as well by adding a loop containing Delay (0.01), a loop of 100 times. Always happens after the conspiracy.

    Does anyone have any idea why this might be happening?

    Hi Paul,.

    I don't have a solution, but I wanted to point out that, even if you see the ring to change its value only when you call the function of tracing, that doesn't say what this function call that really changes the value of the ring. In CVI, some drawing operations are batched, for performance reasons, and the Panel updates only visually at certain times. One of those moments when you draw a chart data. Yes, the ring changes visually at this time there, but it is probably just 'catch up' a change earlier.

    As you are looking through the code, when the value of the ring, you can use the term > command update UI to force the update panel, so that you don't have to wait for the tracing function and see if all goes well this change happening earlier.

    Luis

Maybe you are looking for

  • Portege M750 WIFI disconnects all about 30 minutes on its own

    Hello I recently bought a new M750 and made a clean installation of vista on the system. I downloaded all the drivers from the Toshiba support website and everything works fine. However, the WIFI connection drops every 30 minutes and takes about 2-3

  • The HT820 ear and lower volume stuck button

    I had these headphones for almost 2 years works very well. I don't have a bluetooth phone, but I use my HT820 with my HP Ipaq 211 listening to music or watching movies. I also connected them to my work and the home pc. At work I connected them to the

  • for fms services initialization script?

    VFoglight 6.6 under Linux.  Currently, when the server restarts, it must go and manually start the services fms ("" / opt/quest/FMS/bin/fms - d ' ").  I know that we can add to the inittab, but we prefer to have an initialization script where we coul

  • Verification of updates that Windows 7 takes forever

    I know that it's pretty common, but when I try to get updates on my computer, the control never gets anything done. I'm running on Windows 7 Home Premium

  • If disappearing third-party JDBC drivers attempted to use Data Modeler

    Hi allI'm trying to reproduce the steps described in this blog post Oracle: https://blogs.oracle.com/datawarehousing/entry/oracle_sql_developer_data_modeler about the hive JDBC connectivity. Successfully, I can connect to hive and query the tables of