Control of user access rights

Similar Questions

• Problem with user access rights invited after the installation of el capitan (10.11.6)

  After that I installed OS X El Capitan (10.11.6), I can't change the way the guest user can access applications.

  When I change the usage rights of the guest user in Control Panel (user admin), everything's fine. Safari is the only application that I leave available. But then, nothing has really changed and guest user can use all applications. When I make the change, the guest user is disconnected (otherwise changes cannot be made).

  Could someone help me in this problem.

  There are problems with Parental controls do not stick in El Capitan.

  There is a long thread about this; of some people have found workaround solutions, but they do not always seem to work.

  OS X El Capitan: controls parental NOT work

• CUE 2.3.1 and user access rights

  Is it possible to restrict user rights on the personal Web page of CUE? For example, to keep end users change 0-out option? Thank you.

  No, unfortunately it is currently impossible to restrict to a more granular level. I guess you could use an IP access list for web traffic captured to eliminate completely from/to CUE for some ip addresses/subnets but I don't think that's what you had in mind.

• Vcenter 6 - integration vRealize Log Insight user access rights

  Good afternoon.

  I'm to deploy the solution to the latest version of vRealize log Insight. In my work asked me if I could create a user account only to integrate Vcenter vRealize Log Insight that wasn't the root of vCenter. Search for documentation, I found information on this subject. Also important to remember that this account will collect newspapers of my hundreds of ESXI.

  In the image below:

  

  It is a demonstration of the integration that I made using the default account with root access to Vcenter.

  You must provide credentials user with the following privileges:

  System.View

  Host.Configuration.Advanced settings

  Firewall and Host.Configuration.Security profile

  For more information you can consult the official documentation:

  Configure vRealize Log Insight to be learned from the events, tasks and alarms of vCenter Server Instance

  Configure an ESXi host to events of the journal before to vRealize Insight journal

• level of data access rights

  Hello
  
  In your opinion, what is the best way to implement data access level rights?
  
  Before I used VPD to database 11g. Now, we decided to keep the aggregations in the cube OLAP (AWM 11 g) and I'm looking for the best solution limiting the user access rights to members of special dimension to different levels. For example, we must leave Office Manager to see only its data from team members (and do it dynamically, without having to grant the role of severl hundreds of managers separately), or let product manager see only 3 categories of products.
  
  I am browsing OLAP forum for awhile, most of old son means AW_ATTACH / PERMIT_READ / AUTOGO. Are there other options?

  There are two mechanisms available to control that can see the data by user: cube or dimension according to the strategies of security and private virtual database (DPV). Each have their own forces. Many organizations use a combination of the two.

  Cube security policies allow you to grant access (SELECT, INSERT, UPDATE, DELETE) to a database user or role. You describe what dimension members a user has access. For example, Europe and all descendants. If the security policy is applied to a dimension, that policy is applied on all cubes that use the dimension. If cube security if applied in the context of a policy, the policy is limited to this cube.

  Cube security policies:

  * Are 'hermetic', because they apply to all access methods (SQL querying the views of dimension and cube, SQL, OLAP_TABLE and CUBE_TABLE, OLAP DML, PL/SQL, queries etc.).
  * Are convenient. Apply a policy to a single dimension, and it applies to all cubes. It is very easy to express security policies by selecting the members or the use of hierarchical expressions in Analytic Workspace Manager.
  * Are limited to users and roles, so the applicability may be limited to certain use cases.

  Virtual private database policies are applied to views of dimension, hierarchy and cube. These views using OLAP is not different from any other table or view.

  MEV:

  * Applies only to the objects on which you apply a policy (for example, dimension, hierarchy, and cube views). If you need to make the hermetic policy, you should stop other access methods. For example, revoke execute on DBMS_AW, etc.
  * May take a bit more work to set up, but they offer some additional flexibility because you set the policy with PL/SQL. That's all what you can invent.
  * Can be applied beyond the users and roles.

  The key is that both are quite useful. Learn more about the two and use the feature that best matches your request.

• HOW CAN USER ACCOUNTS - I GET THE CONTROL TOTAL OF THE RIGHTS OF THE ADMINISTRATOR

  My son gave me a new laptop & was the only thing he had done about it. I have to fill his user a/c (I don't know if he had as long as administrator or standard use, i. t is an Assus running Windows 7 Home premium 64-bit. The 1st thing I did was to fill my a/c user and put myself as administrator and then I deleted my a/c son, I deleted then security trend micro came with the laptop and loaded AVG (as I had on my old laptop running xp), I loaded then firefox to allow me to get WOT (Web of trust web) & then I deleted firefox as I didn't want her as my web browser Then I downloaded the drivers from HP for me to load my printer which I did via cable & it worked, then I tried to load the software of the printer & at the end of the installation, a box came in saying that this software cannot be installed using the command "run as" & to log on as a user with administrator privileges (which I've already connected as) I then tried to install a program of work that she did, but when I tried to access it told me who requested access to the registry is not allowed. After all this, I really wanted to I stayed with XP, I started to search microsoft answers forum & got a lot about UAC & I saw a response messages recommending an ITknowledge24 download what is UAC controller tool v1.0, I downloaded it & the icon that he was put in my taskbar , but this has now disappeared, I'm not a beginner on computers but I'm a geek, there seems to be a lot of people with the same or the same things I feel, I just want to know how I can get a complete control of the administrator rights on my computer to allow me to do what I want I could do on my XP , by the way I'm never any infections or malware on my computer laptop previos. CAN someone HELP Please, THANKS (sorry for this post being so long, but if I put in what I did now, it might save some time later).

  I had the same question and posted in this forum 4/17 in order to check the answer here.  Can't say it will solve all of your multiple problems, but you should get full administrator rights.

  Re-start while pressing F8 repeatedly.  Select "Safe Mode with command prompt.  At the prompt, type net 'user administrator /access:yes' and press ENTER.  He should then confirm the success.

  Restart and you should now see administrator as well as your own journal on.

  Note: there is a space between the administrator and the slash.

  WARNING: In Win 7 access to some folders and permissions files is limited for security reasons.  Normally, you should not access this and please be careful when using it.

• I can, t our user access in Control Panel; is a message "wrong number of arguments or invalid property assignment.

  I can, t our user access in Control Panel; is a message "wrong number of arguments or invalid property assignment.

  Hello

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  Cannot open the item user accounts in Control Panel on a Windows XP-based computer

  http://support.Microsoft.com/kb/919292

  Hope this helps

• How to set a new user in Enterprise manager with specific access rights?

  Hello
  
  I want to create a new user in OEM 11g which should be able to access only the jobs section of Scheduler.
  
  How can this be achieved?

  You can create new directors through the installation--> page of administrators
  You can grant some access rights to the target, you can not however grant private access only to the employment system

  Take a look at http://download.oracle.com/docs/cd/E11857_01/em.111/e14586/security3.htm#sthref235

  Concerning
  Rob

  http://oemgc.WordPress.com

• How do I give users access to the addition of other users and groups in weblogic * without * giving administrator rights

  Hello

  Before opening a SR Oracle for the same problem, just wanted to put it out there to see if we can provide a non administrator user access to the Weblogic administration Console so that it can log and ONLY add users and groups, but not change any setting in the administration console. We offer a personalized access? All grain specific to be accessible?

  Please don't give me the links where it says "give read-only access", giving "monitor."

  read only user cannot add new users/groups in the administration console. The administrator credentials can be provided to that user. It just has to be able to connect, go to security domains > myrealm and add new users and groups. nothing else.

  Please let me know.

  Thank you

  Dan

  Thanks Christian.

• Satellite M40-282: I don't have access rights to run Power Saver

  I installed GST when I reinstalled my new OS manually
  and I installed GST but he did not show up to reinstall after.
  In the control panel when I try to click the GST that it says 'cannot be opened because you do not have access rights to run Toshiba Power Saver '.

  But I am logged on as administrator for sure

  Hello

  It s very strange and unusual.
  Have you chosen the right drivers and you have everything installed correctly?

  I studied a little on the net and it seems that the M40-282 Sat has a serial number PSM42E and so take the drivers of the PSM42E series.
  (On the driver page I saw three different M40 accordingly large number)

  I discussed with other users, and especially incorrect installation was the problem. On the driver page, I found a statement of installation, and in my opinion, you should follow the guidelines in this document.
  Everything should then work. I hope ;)

  Check it out. Good bye

• Windows Vista Volume control - several users connected

  Vista Home Premium. Several users. IE8 on a site playing music.
  fast user switching. The music heard in the new session of the user. Mixer volume control unable to see the other application users to turn off the music.
  How can I make Blender see other sound control applications users

  Hello gmayes,

  In addition to what Anthony has provided above the quick change of user in Windows Vista is designed to run programs that are specific to each user profile. This means that when you play the music in a single profile and use the fast user switching will continue to play music and the secondary profile will not have access to control the Web pages or the volume of the music played on the primary profile.

  Using programs of another quick switch mode user profile is not something that is supported by Vista right now.

  Judd
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• EssbaseCluster-1 to 11.1.2 - giving users access filter

  I'm trying to grant access filter to an Essbase application users in 11.1.2.1
  
  Shared Services, I am right-mouse-click on the application under the EssbaseCluster-1 node and selecting 'Assign Access Control', but no users don't appear when I click on the button "search". I have already configured some users with access filter HSS, but without success.
  
  Suggestions people?
  
  Published by: Xansaman on August 1, 2011 20:41

  Users access on one level essbase server role, if not try to assign this role to one of them and see if it helps.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Tecra M2: Energy saving - have no access rights

  Hello

  I am running a Tecra M2 with Windows XP SP2 and I recently installed Toshiba Power Saver as I want to make the most of my battery on a flight that I take. However, when I try to run the Toshiba Power Saver in the Control Panel, I get a window with the following error message:

  Cannot be opened because you do not have access rights to use 'TOSHIBA Power Saver'.

  I am logged on as administrator, but I still get the same problem. I even re-installed Windows XP, but after having installed all the drivers, I get the same error. I tried to install the version of Win2K of soft, but it gives the same problem.

  Any help is appreciated as I want to make the most of my laptop computer power wise.

  TIA

  Klaus

  Hello

  I put t know what is happening in your case, but if you are logged in as administrator starting point please power saver utility and go to the CONFIGURATION OPTIONS. Check the CONFIGURATION PROFILES and activate both options here.

• How can I block the users access to microsoft office?

  How can I block the users access to microsoft office?

  You must set "" permission to run on each of the Microsoft Office programs (word.exe, excel.exe, powerpnt.exe, etc.) such that the group 'Administrators' and the SYSTEM is allowed to run.  To do this, you do a right click on the .exe file, select 'Properties', then click on the 'Security' tab and change security as you wish.

  If you do not have a 'Security' tab, then it is because you have XP Home Edition, or if you have XP Pro with active Simple file sharing.  For XP Home, you must boot mode safe (repeatedly tap F8 at startup key) and login as an administrator to access this tab.  For XP Pro, follow the instructions in the following article:

  "How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP"
    <>http://support.Microsoft.com/kb/307874 >

  HTH,
  JW

• After installing a new HARD drive, I get a screen "control i to access the configuration utility.

  Help?

  I installed a new HARD drive on my xps 15 because the old drive crashed. Everything works fine and the system boots perfectly. Before entering the Dell splash screen, the screen "control i to access the configuration utility" appears for 5 seconds. After that, the normal boot sequence resumes. Can someone please explain to me why this is happening and what I can do about it?

  Here is a link to the screen I get started: http://s102.photobucket.com/user/alexcinie/media/photo_zpsb75f0a7f.jpg.html

  The mSATA drive is used as a cache for the hard drive dynamic - these are essentially implemented in a RAID 0 array.  See the link below (it is for Alienware, but applies to your system as well).

  If you want to keep the disk cache, you need to configure the array as shown.

  http://www.Dell.com/support/troubleshooting/us/en/04/KCS/kcsarticles/ArticleView?docid=564442