Control Panel does not match the user's Guide

My printer is an Officejet Pro 8500 a A910n. Several pages in you User Guide, Chapter 9, give instructions after you press the right arrow button. some touch asy 'Reports' and some say touch "tools." On my control panel I don't see 'Setup', 'network', 'photo' and 'Discovery' when I press the right arrow.

The user's Guide may need to be updated.

Thanks for the valuable comments.

I asked bad team to solve problems.

Tags: HP Printers

Similar Questions

  • Control Panel is not on the list. Users and local groups does not appear in computer management.

    1. click on start, and then point to setting, control panel is not on the list.  When you try to get to the Panel of control via a link in Help and Support, had an error, "operation has been cancelled due to restrictions in effect on this computer.  Contact your system administrator. »

    2. local Users and Groups does not appear in computer management.

    There is only one profile on the PC, the OS is XP Home.  It seems lost his administrator privileges somehow my user profile.  Could you please suggest how to solve this problem?  Thanks in advance.

    Hi PJohnson,

    You can access the link below and follow the steps in the article to create a new user account and copy the data to the new account.

    http://support.Microsoft.com/kb/811151

    I hope this helps. Let us know the result.

    Thank you and best regards,

     

    Srinivas R

    Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • the audio control panel does not appear on various websites which I am sure they are there. I see them in IE and chrome, but not in FF

    The audio control panel does not show simply. On this site, I should see the control panel. http://www.testplek.annemariebeeke.nl/huiswerkopdracht_week3_bonus.html.
    It does not show in the other browsers, other people can see it, but I can't.
    Even with these sites:
    http://www.jokevan.nl/HTML5/oef3-3.html
    http://kokenvoorpapegaaien.nl/Kellerhuis/oef3-3.html

    Reload Web pages, and ignore the cache.

    • Hold SHIFT and click reload.
    • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
    • Press 'Cmd + Shift + R' (MAC)

    Clear the cache and cookies from sites that cause problems.

    "Clear the Cache":

    • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

    'Delete Cookies' sites causing problems:

    • Tools > Options > privacy > Cookies: "show the Cookies".

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Possible error with module GWT.xml file. The value of time compilation agent user (ie6) does not match the value of user.agent (ie8) run time

    Hi there... How can I sort this problem as this message looks back constantly on google Account... ERROR POSSIBLE WITH GWT. The value of time compilation agent MODULE XML FILE user (ie6) does not match the value of user.agent (ie8) run time

    Hello nEve Adam,.

    Thanks for the return of the response.  Below, I've added some links Google support on this issue.  I hope this helps.

    ERROR: Problem Possible with your *. GWT.XML file module. The value of compile time user.agent (opera) does not match

    http://www.Google.com/support/forum/p/blogger/thread?TID=2d6d9bd1326a07c4&hl=en

    In addition,

    Message from Web page

    http://social.technet.Microsoft.com/forums/en-us/ieitprocurrentver/thread/53194559-306a-4ffc-a614-4bac817f178d

  • Power options in Control Panel does not open

    Hello

    I use an Acer laptop with windows XP.
    The option of power supply in the Control Panel does not open. If I was not able to adjust or correct energy options including registration screen saver.
    Appreciate a feed back from any body.
    Concerning
    BIJU

    When you have double-clicked on it, did minimize you the Panel?  The dialog box appears sometimes behind the Control Panel, and you can not see.

  • 0xc0000221 error: Windows Boot Manager is possibly corrupt. The header checksum does not match the checksum calculated.

    Just turned laptop on a message saying... Manager of windows startup, the file is possibly corrupted, his header checksum does not match the sum of computer control. ?? File: / windows/system32/win load.exe...

    status: 0xc0000221.

    What help please this meen?

    Original title: help!

    Hi markwiggins,

    Follow these steps:

    Method 1: Run the Startup Repair

     

    For instructions, see the following article:

     

    Startup Repair: frequently asked questions

    If the startup repair does not resolve the problem, follow all the methods of these items:

    What to do if Windows does not start correctly

    How can I fix a startup (startup)?

    Method 2:

    Restore the system in the advanced system to a restore point recovery options menu before the show.

    For more details, see the following article:

    What are the system recovery options in Windows Vista?

    Method 3:

    Use the Bootrec.exe tool in the recovery Windows (WINRE) environment to troubleshoot and repair the Boot Configuration data.

     

    For instructions, see the following article:

    How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  • White Panel - Control Panel does not open

    Control Panel does not open

    I had printing problems - this workstation is connected to a home network and will not print.  Instructions suggested that I check my printer controls.  However, when I choose Control Panel, only an empty white box opens - and then closes.  How can I fix my control panel?

    Hello

    ·         It is a network printer, or is it connected locally?

    ·         It worked before?

    ·         You get the error while trying to print?

    (1) we will try first to resolve the issue of Control Panel.

    Run the System File Checker tool.

    Diana

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • NVIDIA Control Panel does not open

    I just reinstalled Windows 7 on my PC and the NVIDIA Control Panel does not open when I click on the link in the windows control panel.  I installed it by using Windows Update.

    Updates Windows reports that it installed properly but the Panel itself will be open from nt.

    Should I remove it and reinstall again?

    Version is Ver: 191.07

    Hi AdelaideJohn67,
     
    I suggest to uninstall existing NVIDIA Control Panel and restart the computer. Visit the NVIDIA Web site, download and install the drivers manually.

    http://www.nvidia.com/download/find.aspx?lang=en-us
    After installing the drivers, restart the computer and just do a right click on your desktop and watch if the NVIDIA Control Panel whether or not written.

    Thank you, and in what concerns:
    Shalini Surana - Microsoft technical support.
    Visit our Microsoft answers feedback Forumand let us know what you think.

  • Option of customization in Control Panel does not open. Premiuim Windows 7 64 bit home

    The option of customization in Control Panel does not open when you click it in Windows 7 Home Premium 64 Bit.

    Impossible to change the current theme.  Any suggestions?

    Hello jls8w,

    Because you are unable to view the file in this way, try the following:

    -Click Start > type notepad in the start menu search box > right click on Notepad in results above > click on run as administrator

    Notepad is open at the same time:

    -Click on file > click Open

    Navigate to the location of the cbs.log... Type C:\Windows\Logs\CBS\ in the cbs.log file and press enter

    Now follow the rest of the instructions in the link provided by Amrita.

    Hope this helps

    Chris.H
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Control Panel; Does not open programs and features.

    Help! Programs and features in Control Panel does not open. It's as if the file is no longer there.

    Hello

    I had the same problem, caused by an update of thugs. I had to do a repair installation to fix the problem. For this,.

    1. Start your Windows computer.
    2. Insert your Windows system DVD into the DVD drive.
    3. Once there either using Windows Explorer or AutoPlay navigate Windows system disc and double-click on the file called "Setup.exe".
    4. Let Windows boot phase review and collection, when that is complete, Windows continues to install Windows 7 on your existing installation of Windows 7. If there is a problem, Windows will give you the opportunity to continue or back out (I would recommend back out).
    5. Once installation is complete, you will need to then activation key, then go to Windows Update and precede to download and install all the WU you miss.

    That's all. It takes more time to make that a full install as Windows must work around your installed files. But it is the method that worked for me.

    Let me know if this solves the problem for you.

    Kind regards

    BearPup

  • computer/control panel does not load in windows 7

    Hello

    I had this problem and have sought for a while again, unsuccessfully, trying to open the computer, it's green bar slowing down the loading, but once completed no content will show in the computer at the same time control panel does not load.  This problem will not occur all the time. and if I close the window and reopen it. He came back to normal, did a sfc according to other threads have disabled the network discovery.  past again, Please HELP?

    CONCERNING
    LEE

    Click Start
    Type: CMD, according to the results, right-click CMD
    Click on "Run as Administrator"
    At the command prompt, type: sfc/scannow

    This will check for any breach of integrity

    Restart your system

    also:

    Check your hard drive for errors:

    Click Start

    Type: CMD, according to the results, right-click CMD

    Click on "Run as Administrator"

    At the command prompt, type: chkdsk /f /r

    When you restart your system, your computer will be scanned for errors and will try to correct them.

    If the problem persists, I suggest that you scan your computer for malicious programs:

    There are some that will hide your files/folders so that you don't normally see them. I strongly suggest to run a scan on your computer with your antivirus/antimalware software. If you need to, you can also use the Microsoft Safety Scanner, it's free:

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Also, if your files are hidden, check out the following article on how to display the:

    http://Windows.Microsoft.com/en-us/Windows7/show-hidden-files

  • Windows Update Control Panel does not open in Windows 8

    Hello

    I use Windows 8 unique language that came pre-installed with my laptop.

    My problem is that the option to update windows from the Control Panel does not open. All other options like Firewall, power, administration etc tool are all very well opening. but every time I try to access windows update, it gets stuck, curious thing is that explore is not having hung or whatever it is, the Explorer appears not any message "not responding" in Task Manager either, everything else seems to work fine, except for the update of windows which is completely frozen.

    I've included a snapshot of the frozen window also...

    I tried to use the restore of the system for as long as possible, but it does not work. I want to update to windows 8.1, unfortunately I can't do unless I upgrade my windows 8 first. Please help me to solve the problem...

    Thanks in advance

    Hi Gray,

    Thank you for the update on the question and sorry for a delayed response.

    If the Windows Update service is missing in services.msc then I suggest you follow the suggestions provided by the suggestion of Ned Pyle and jasoncollege246 the link below.

     

    http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/5a8bf018-C522-4a8e-a857-ac73f5e706ee

    Note: Follow the steps described in this section carefully. Serious problems can occur if you modify the registry incorrectly. Before you modify it, Save the registry restore problems.

    Keep us updated on the issue and we will be happy to help you.

  • Error message - the value entered does not match the Format of the field

    I get an error message in Adobe Pro x: "the value entered does not match the format of the field [JF13].

    I have JF13 scheduled as follows:

    Calculate tab:

    If (Number (this.getField("ck4").value) > 0) this.getField("JF13").value = Number (this.getField("FL019").value); else this.getField("JF13").value = "";

    It is programmed in this way, so if the user checks the checkbox in front of the field, only then will JF13 fills a value, which pulls of FL019. I also value parameters 'number' because the data to display in the form of a dollar amount $xxx.xx.

    FL019 is a hidden field on the form which takes an amount of a central computer and its settings can also be programmed to 'Number':

    I get four popup windows with the above mentioned error message, and the only way to make the stop message is to remove the «number» field format. However, when this is done, if a number any ending in a zero is entered, it cuts the zero. This is not acceptable either.

    Is there some kind of script that I could add or otherwise to prevent the error message and the cutting out of the zero on JF13?

    I'm not very proficient with javascript, any help would be appreciated!

    Just include the two quotes, not the comment brackets.

  • Signature App, number of Folios error does not match the main file Folio

    Hi all;

    I have a standalone application of 250 pages that I'm trying to compile for the Apple Store. I've read through the forums and enabled "AppBuilderLoggingEnabled.cfg" in my home directory of the user to discuss the issue. Here is an excerpt of the newspaper which has been created which, to me, shows why the app is not signed.

    46386 codesign ERROR [main]. Signatory - failure during the signature

    java.lang.RuntimeException: invalid package, number of folios does not match the primary file (Folio.xml or Issue.xml) 251-250 folio

    at com.adobe.devtech.codesign.IPAOutputHelper.convertFolioProduceFormatToFolio (IPAOutputHelp er.java:272)

    at com.adobe.devtech.codesign.IPAOutputHelper.replacePlaceholderFolio (IPAOutputHelper.java:1 92)

    at com.adobe.devtech.codesign.IPAOutputHelper.execute(IPAOutputHelper.java:82)

    at com.adobe.devtech.codesign.Signer.sign(Signer.java:169)

    at com.adobe.devtech.codesign.Signer.processArgs(Signer.java:106)

    at com.adobe.devtech.codesign.Signer.main(Signer.java:46)

    46388 codesign ERROR [main]. Signatory - error: invalid package, number of folios does not match the master folio (Folio.xml or Issue.xml) 251-250

    I deleted special characters in the article titles and rebuilt the app only to deal with the same error. I have advanced and created a new AppID in the portal to Apple developers, created new files available, and the error remains. I am now to create a new folio and import the items into the new folio to see if that will solve the problem of "number of folios does not.

    Any help or idea would be amazing. Thanks to you all.

    -mat

    I created a new folio and all items imported again. After hitting "Create App" for this new folio, to about 10 pages in a 'PDF Export' error stopped the app creation process. I went in InDesign to update the layout for the 10 page to see that the PDF export issue kept me from updating the page layouts as well. Some thing in the InDesign file was not playing nice with the creation of folio, so I created two new InDesign files, deleted the article and built a new article from scratch. I was able to import the new page in a new article to the main folio and click on "Create App" again. This time he had no problems with the creative process. I have synced files available in App Builder and could sign the application code.

    I guess the moral of the story is to double and even triple check each item along the way to make sure there is no problem, is introduced into the process that eventually causes headaches during the phase of distribution of creating applications!

    -mat

  • View usage type lookup does not match the object list definition drop-down display

    can someone tell me why this error could be coming:
    View usage type lookup does not match the object list definition drop-down display

    Thank you and best regards,
    Amrit

    Hello
    seems that in your choice list item (probably call him messageChoice), you are defiining of these properties of the list view definition and the choice list view instance.
    You must provide one. If your choice list values to all users (i.e. the vo behind the choice list has no dynamic where clause or the query), then use choose list definition property. If each user sees different options in the drop-down list (i.e. dynamic where clause for vo), use the property of the lookup instance.
    In the definition of choice list, give the fully qualified name of the vo.

    Abdul Wahid

Maybe you are looking for