Control photoelectric Windows 7 screen saver

Similar Questions

• Why not remove images from my office window and screen saver?

  You have a thorny problem and a bit tricky here.

  A few months ago, at my work, I got a new iMac (for me). As I was getting started upward, furnished and ready to use, at some point it must be synchronized with my iPad, which was nearby. So, when I open my desktop and screen saver system preferences, I see a multitude of images that I took with my iPad and I somehow was stored and transferred to my work machine. One of these pictures is, shall we say, I don't like for anyone to see except my other significant... and it is possible that I can receive an offer for a new job at some point in the near future. Needless to say, I don't want to leave this pic on my machine here for someone else to run into.

  Problem is that I can't remove it. It won't let me select it; -button stays grayed out. The offensive peak is no longer on my iPad, but it remains obstinately to the view from my office window & screen saver system preferences. 1. Why can't select and remove? 2 in the world this image file actually location? I could trash it maybe, if I could find the actual file.

  To sum up, I want this pic from this machine, but I can't remove it now as it is. What can I do?

  

  Open the pictures folder in your user account and browse the library of Photos for the photo of the source and remove it.

• 3D Windows XP screen saver does not work after a CMOS battery failure

  I have a dual-boot Windows XP / Windows 7 Ultimate 64 bit set in place.  Somehow, after a flat battery CMOS, my 3D screemsavers do not work.  I mainly use the Windows 7 but I'm checking the XP.  The screen saver settings seem OK but the preview and the screen saver appears not to do 3D.  I've updated my drivers nVidia GTX 275.

  Note Pleaser that everything works well under Windows 7.

  Hi smlunatick,.

  (1) what version of Windows XP are you using?
  (2) if it works much earlier?
  (3) you use multiple screens?
  (4) were there any changes to the computer before the question?
   
  See the method mentioned below.
  You receive an error message when you try to use or to preview a 3-d screen saver in Windows XP Media Center Edition 2005
  http://support.Microsoft.com/kb/925086
   
  Three-dimensional screen savers may not appear correctly on computers that use multiple monitors in Windows XP
  http://support.Microsoft.com/kb/839693
   
  3D screen saver may not work if you extend the desktop on some portable computers
  http://support.Microsoft.com/kb/325550
   
  Get back to us with more information on the issue so that we can send the exact resolution.

• Windows Vista screen saver don't work.

  I have Vista Premium Home edition.  Years my screensaver bivalent has switched to display my photos in random order, after 3 minutes of inactivity.  Now turns to black and a little rectangular screen appears saying the screen saver does not start.  I tried to reset the screen saver, but so far, I can't make it work.  Help, please

  There is no other details I can think.  My screen saver does not work and I don't know how to fix it.  Thank you.

  Hi Tom,

  ·         Were there recent changes in the computer before the show?

  ·         Have you tried to run the system restore?

  ·         You use Microsoft Wireless mouse?

  Follow the steps mentioned below and check if that helps.

  Method 1: solving the problems of power option.

  To solve the problems of power, run the fixit mentioned in the link below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-power-problems

  Method 2: Clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow these steps to reset the computer to start as usual. See step 7 in the article.

  Method 3: Update graphics card drivers.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Note: The steps mentioned in the books above site Web for Windows vista and Windows 7.

  Hope this information helps.

• I can't find the pictures being shown in Windows 7 screen saver!

  In the screen saver Windows 7, if I choose the "Photos" option, it shows a lot of pictures that I can't find on the computer, despite navigating to the folder, to what it seems.

  The photos are a mixture of holiday snaps, images that I never saw before and other images of type system, for example standard SatNav screenshots.

  How can I find where on the computer of these photos are taken from? I have walked my HDD, conducted the research of windows but also to check the option to show hidden files and folders with no luck.

  Hello ChrisMartinFX,

  Have you checked to show hidden files?  I would like to suggst confirming this is defined first, but if you are unable to locate the photo I opened Windows Explorer and type in .jpg to see if you can find it.  I know that this may take time if you have hundreds of pictures.

  If you go to the screen saver settings, you should be able to see in the settings tab where the pictures come from.

  Show hidden files

  http://Windows.Microsoft.com/en-us/Windows7/show-hidden-files

  Please let us know status.

• Windows 7 screen saver has suddenly stopped working

  Recently, the screen saver on my laptop (Sony Vaio Z model VPCZ119GX with 6 GB of ram and a core i7 processor) has stopped working.  He has always worked in the past, but suddenly (as of mid-June 2010) stopped it.  None of the Windows 7 default screensavers work (for example to mystify, ribbons, etc.), nor fact Windows live Gallery screen saver.

  I am running Windows 7 Professional x 64.  If I go to preview, I can see the screen saver, but it does not start after a period of inactivity.  I reduced the timeout to 1 minute and I tried both require a password and no password and neither work.  I do not use a wireless mouse (I have read other posts that a mouse without a wire could cause this problem) and I have fixed via the USB port.  I went in the Manager of peripheral and done so that devices that have power management options have been disabled.  I checked my task manager and I don't notice anything out of the norm running in background.

  Here's the interesting part.  If I connect to the hidden administrator account screen saver works perfectly.  If I create a new user account screen saver still does not work.  Something prevents the screen saver works in the created user accounts, but works perfectly under the administrator account.  What could cause this problem?  How to solve this problem?

  Another interesting information.  The same problem exists on a friends Lenovo T400s under Windows 7 Ultimate.  His screen saver has worked a few days ago (week of June 21) but suddenly stopped as well.  A windows update may have caused this problem?

  Finally, I have not tested this, but it seems that hibernate/sleep has also stopped working.  Unfortunately, I sleep/hibernation activate after 4 or 5 hours and I can't say for sure 100% that I let the computer idle for this period of time, but I could have sworn that I have.

  I think screensaver and put into hibernation / sleep are all affected by the activities of intelligence and something is causing the machine to think that this is not idle.  But under the Admin account, it works very well.  I spent hours trying to understand this point, but without success.  I have even restored to the point of thinking older restoration that something could happen, but it does not solve the problem either.

  Help, please!

  Brian

  briboynyc and dougfulcher

  I am so happy that I found this forum.  About 6 weeks ago, I lost my screen saver on our computer brand new with windows 7.  I was on the phone with HP in India twice and finally they decided to take back me to the factory restore thinking that it was because of our backup files in windows XP.  Repeat all. I backed up all my files, and then we started again from the beginning.  It's the same thing.  We packed up the computer and returned to the store, a new computer and started all over for the third time.  Last night is the same thing.  I was really frustrated and thought maybe it was a little problem with windows 7 so decided to get on the microsoft Web site to see if I could communicate with someone from Microsoft.  That's when I discovered this forum and started reading everything.  When I read the answer of dougfulcher, he mentioned magic jack running in the background.  We disconnected magic jack and that solved the problem immediately.  I am really grateful and only wish I had discovered it before that I lived all this computer return and restoration.  Everything seems to work very well.  I hope this helps someone else.

• Windows 98 screen saver

  An old windows 98 trans me screen saver will not work on windows 7 the same using the compatibility settings correctly. When I try to launch it I get the error message "the version of this file is not compatible with the version of windows you are using. Check your computer's system information to see if you need a x 86 (32 bit) or x 64 (64-bit) version of the program and then contact the software publisher. "I can't really get a new version of the screen saver, but I'd really like to use this screen saver.

  If you are running 64 bit win 7 as far as I know it won't work.  Did you check with the developer to see if there is a newer version?

  http://transamcountry.com/home/index.php?option=com_content&task=view&ID=14&Itemid=1

  It doesn't seem to work even in vista.

• Windows 7 screen saver photos

  I want to have the file source discreetly displayed on the screen when using 'my images' as a screensaver of windows 7. This option has been made available on XP but I can not find on windows 7. Any help

  I want to have the file source discreetly displayed on the screen when using 'my images' as a screensaver of windows 7. This option has been made available on XP but I can not find on windows 7. Any help

  Hello

  This feature is not available on the version of Windows 7 the photos screen saver.

  Kind regards

  Thank you for using Windows 7

  Ronnie Vernon MVP

• How to make Windows 7 screen saver 'Photos?' display the name of pictures or pass

  I have updated Windows XP Pro Sp3 to Windows 7 pro 64 English on the AMD Phenom II X 4 64 with ATI Radeon HD4650.

  I liked my screensaver on XP who showed me one of my photos of 5,000 in random mode with name wich included date and place.
  Can't do Windows 7!
  I know that the screen saver appears not to be a big problem, but for me it means a lot. I found this question on this forum but no response.
  Please help me configure screen saver Photos that I wish or find and install an old XP before I reinstall XP on my computer!

  Hello!
  I discovered how do in reading
  http://social.answers.Microsoft.com/forums/en-us/w7desktop/thread/45799d0c-38f2-40FC-B42B-4b53ef7c798f/
  Then I found ssmypics.scr in terms of Windows XP and copied on W7/Windows/System32 map!
  It works very well!

• Windows 7 screen saver works in Panel, but does not start

  A graphics card freezing issues so I replaced the card and installed the drivers updated.  However, screensaver windows 7 won't launch itself.  It works very well in the Panel, including the example.  But when the time comes to launch due to inactivity of the system the screen goes black and the monitor goes to sleep.  Several times, the monitor hangs to this state of sleep and I have to restart the computer.

  It is a clone of pc with a Biostar G41D3G, socket 775, the Intel Core 2 Duo 4 GB memory, 500 gb hdd, MSI Radeon 1 GB graphics card in the pci-e slot.  Operating system is Windows 7-64 bit.

  E-mail address is removed from the privacy *.

  Hello

  It happens with all screensavers?

  Method 1:

  See the following site:

  A screen saver that displays the images stops working in Windows

  http://support.microsoft.com/kb/2425702.

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://windows.microsoft.com/en-US/windows7/Back-up-the-registry.

  Method 2: Save a new user account

  See the following site:

  Create a user account

  http://windows.microsoft.com/en-IN/windows7/Create-a-user-account.

• Windows 7 screen saver

  You can use photos edited and filed under LR4 photos screen saver in Windows 7?  I noticed when using Windows Live Photo Gallery as my screensaver, the unseen photos are used.

  There is a plug-in that allows for previews of LR for the screen saver.  http://www.lrsaver.com

• Go to active windows and screen saver comes up.

  Original title: need more time

  My active pages are going and I get my screensaver, then I have to click back in my browser. I looked at my aid centres, nothing. I feel stupid like all out them, but can someone help me? God bless you.

  If mean you your screen saver "comes" too early, right-click on an empty area of your desktop, choose Properties, the screensaver tab and check your adjustments there.

  Click OK to save the settings and close the dialog box.

  If this isn't what you mean, you need to provide more details.

• Windows 7 screen saver problems

  My screen saver does not work correctly. After I got the settings, the saver will start and run for a few moments and close. A while later it will restart and stop again. It could be hours before it starts again. I have reset all settings several times screensaver, and again, I have problems with it working properly.

  Maybe things can stop a screen saver

  Just to name a few.

  Update of security suite / a keyboard or a mouse too sensitive wireless...

• When I start windows my screen saver comes up, I hear windows in the background, but my desktop is not visible

  When I start my screensaver displays but my icons don't display Windows

  Hello

  What have been the recent changes in hardware or software that are performed on the computer before the question?
  Please follow the below link to help solve the problem.
   
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  
  322756 (http://support.microsoft.com/kb/322756/)
  
  How to back up and restore the registry in Windows
   
  Why my screen is black when I start Windows 7?
   
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7
   
  I hope this helps.

• Problem with Windows Live Screen Saver - about Indeo codec

  Curiosity got the better of me and I tried an old favorite game on my Vista.  In fact, it worked, but now I have problems with my Windows Live screensaver.  He stops working whenever it starts.  Not too serious, but very annoying and we love our screensaver slideshow.  I uninstalled the game using the uninstall program, but the problem is still there...
  Here's the problem report that keeps coming back.  I'm ready to try the suggestions, but the link in step 1 doesn't seem to give me any information that would be useful.  I would try the second step, but I don't know if the unsubscription iac25_32.ax will mess thing up - and if so, how do I re - register... Help, please!

  Problem report

  has stopped working properly. is a codec. The file name of this codec is iac25_32.ax. To try to resolve this problem, follow these steps. One step might solve the problem, but if it isn't, then go to the next step.

  1. Click here to access the Intel Corporation Web site to check and install updates iac25_32.ax

  2. Use the regsvr32 command to unregister iac25_32.ax

     If you are unsure which program is causing the problem, you can delete iac25_32.ax from the list of codecs installed by cancelling registration there.

     Warning
     Iac25_32.AX deactivation will result in all programs that are based on the codec to stop working or lose functionality.

     1. Click on the Start button , then, in the search box, type command prompt. In the list of results, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

     2. At the command prompt, type regsvr32 /u iac25_32.ax, and then press ENTER. iac25_32.AX is now saved.

  Hello

  I suggest you post the question in the forums and check them off below if it helps:

  http://windowslivehelp.com/solutions.aspx?ProductID=1

  It will be useful.