Control the actuator linear pulsatile - need help
Hello
I have a VI that controls the speed of a linear actuator, which is placed in a case. A switch of race entry
the structure of matter between the forward and rear. This allows the actuator to move in a continuous movement is forward and
reverse. What I want to achieve is a pulsatile movement. The linear actuator works for a time determined and completely off
for a time determined.
I tried various approaches with the elapsed time function, to alternation of wait times but can't seem to get this, any help
would be greatly appreciated, I have attached the VI.
Thank you
GER
Try a state machine.
When the button is clicked, switch between an and the State to proceed with a waiting inside.
Same for the return.
Tags: NI Software
Similar Questions
-
all the deleted variable envoirment need help
all the deleted variable envoirment need help
Hey Hamid,
I suggest you perform a repair of the system. Followf operations from the link provided and check.
How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
http://support.Microsoft.com/kb/936212?WA=wsignin1.0
Important: Remember to backup all important data before doing the repair.
Hope this helps and let us know if you need more assistance. We will be happy to help you.
-
worked very well and when was time to save I get the cyclic redundancy check, I try several times and made the same thing I need help please
Hello Hans,.
Thanks for choosing Microsoft Community!
According to the description of the problem, you have problems when you use the backup on Windows 8 feature.
Please answer these questions to better understand the issue and help you:
1. are - what you're talking to backup and restore functionality on Windows 7?
2 have you made any changes to the computer before the show?
It is perhaps to cause bad sectors on the hard drive, run the disk check to repair bad sectors
Check your hard drive for errors:
http://Windows.Microsoft.com/en-us/Windows7/check-your-hard-disk-for-errors
Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
For more information:
Backup and restore: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions
Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.
-
My hp s3321PC Virginia-PC on safe mode and has been hacked, I don't have the recovery CD, I need help to restore at least it ' s factory settings. Thanx
See the manufacturer's web page for detailed instructions on 'Factory Restore'.
-
I am trying to download Adobe premiere pro cc 2015 but it just says: error writing to the location of the temporary file, I need help!
Clear your temp and tmp directories.
Close your cc desktop app and restart as admin (win) or root (mac) user. Next, install your cc applications.
-
The latest version of Lr does not work with the last WIN10, I need help
The latest version of Lr does not work with the last WIN10, I need help
Finally I understand it by putting at level c ++ Redistributable Package, surprisingly it works. Anyway, thanks for your answer...
Good day!
-
Hi Mr President, last week I have a crash on my computer. Yesterday I installed PSE12... but I can't open the program, please I need help/support for this.
Wath can I do?
In the box: PN 65224809, product key 1057 -.
Please can you tell me wath is you solution?
Thanks a lot for helping me
Best regards, Roland Cuypers
Post edited by: Sandeep Singh removing serial number
Hi rolandc65772962,
Sorry for the inconvenience. Please provide us with the complete error message you get.
Kind regards
Sandeep
-
Need to show daq reads per second, but only to record a reading every 10 minutes, need help
You are also looking to taste to 1 Hz data acquisition?
My approach would be to use the DAQ acquisition to time your loop display reading each acquisition, then use the loop counter to control the logic of your writing to file. For 1 Hz and 10 minutes write I would use 'quotient and remainder' I / 600; If rest = 0, then write the data point.
For the date and time, under Calendar palette use the time get in seconds food a DateTime Format to a string.
-
I can not restore all the missing profile I need help and I want to reinstall my firefox browser
whenever I installed the firefox browser app and once installed it say cannot load the missing profile I do not know what to do and want to installed my firefox evil bowser and I need help please and thank you.
Hi, see How to run Firefox when your profile is missing or inaccessible and let us know how its going
-
I forgot the password of admin, need help. (unique number)
I have a problem with my computer. I have access to a guest account, but the account admin I need to access an administrator account on my computer, I have a guest account and I have access to cmd, but I cannto run administrative.
I also use an ibuypower drilling rig. If the spamming f8 does not bring in safe mode. They have their own menu f11 but I don't know how to operate it.
Can someone help me get into the hidden administrator account or recover the password of my account admin? Thank you.
Hello
"What to do if you forget your Windows password"
http://Windows.Microsoft.com/en-us/Windows7/what-to-do-if-you-forget-your-Windows-password
"If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
http://support.Microsoft.com/kb/189126/en-us
Tools third password
Some third-party companies claim to be able to bypass the password that have been applied to files and features that use Microsoft programs. For legal reasons, we cannot recommend or endorse any of these companies. If you want to help to break or reset a password, you can locate and contact a third party company for this help. You use these third-party products and services at your own risk.
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.
Here's information from Microsoft, explaining that the policy:
See you soon.
-
Having a few issues with the functionality of Windows, need help.
The question I want to have all started with Windows media player, it kept giving me an error whenever I tried to say something about some dll and she had to be reinstalled so I went in the programs and features Panel and took office and uncontrolled Windows media player in the media tab. I restarted my pc and when I am returned to features to reinstall media player it gave me an error message indicating an error has occurred. Not all features have been changed. Well, I restarted my pc again and it says failure configuration windows updates, returning to the changes before the logon screen appears.
He did exactly the same thing every time I try to get media player back, gives me this error and is unable to set it up. Need help please, I'm frustrated and don't know what to do as I use media player as my default player. I'm running Windows 7 Ultimate x 64-bit with service pack 1 installed.
(Moved to programs)
Personally, if Id had malware on my pc, after a clean analysis Id make sure pictures of data, documents, etc. are saved.
After that, you can try creating a new account admin test, and if it leaves you then try to install WMP for this account.
With some malware is hard to know what that its alteration, but it sounds like it may have fiddled with your security access settings.
-
No index on the primary database. Need help with "COUNT OFF"; option
11 GR 2 11.2.0.3 under linux
Hi everyone,.
It's an honor to be with you guys.
I have a big question here and I am unable to decide on a permanent solution.
We have a primary database that is configured to have a logical expectation.
The logic of the day before was not built by me. But I'm now support...
So as the title suggests, there is NO primary index / unique + not null on a large number of tables in the database of emergency primary/logic. But the application logic guarantees uniqueness values rather than null.
Here is where the problem starts.
Guys request DO NOT want us to create an index on the primary database.
According to my understanding, because the database lack of clues, the apply SQL must do a full table scan whenever it changes / remove data. It is a very expensive process and consumes a lot of time. This takes hours together to apply a minute with a value of newspapers on the logic of the eve... A huge lag is created during the hours and is not acceptable.
So as I told you earlier, the guys request do not want an index on the tables not supported.
They use the database pending logic exclusively for information purposes and it's like production for them...
Let me give an overview...According to the document on the creation of the logic of the day before for 11.2 as below
http://docs.Oracle.com/CD/E11882_01/server.112/e41134/create_ls.htm#SBYDB4730
Step 1 to find tables without identifying unique logic in the primary database.
Query the
DBA_LOGSTDBY_NOT_UNIQUE
view to display a list of tables SQL may not apply be able to uniquely identify. For example:SQL> SELECT OWNER, TABLE_NAME FROM DBA_LOGSTDBY_NOT_UNIQUE
2> WHERE (OWNER, TABLE_NAME) NOT IN
3> (SELECT DISTINCT OWNER, TABLE_NAME FROM DBA_LOGSTDBY_UNSUPPORTED)
4> AND BAD_COLUMN = 'Y';
The above query has 1040 tables in a particular schema. All the these have no index is not null primary / unique.
Now according to the step 2 as below, we have an option to add a disabled RELY primary key constraint.Step 2 Add a disabled RELY primary key constraint.
If your application provides the rows in a table are unique, you can create a primary key disabled
RELY
constraint on the table. This avoids the overhead of maintaining a primary key on the primary database.Can someone explain what this RELY constraint is disabled and how to function and help please?
I have a few questions about the constraint to RELY.(1) change current plans of optimizer on primary for the execution price?
(2) can help to boost the performance of SQL apply without creating index on the logical standby database?
(3) it will change current plans of optimizer logical pending for the SQLs running?
What are the options that I need to increase the performance and table scan complete engine AVOID SQL apply on the logic of the day before?
Thanks a ton for reading my post.
Kind regardsAbhishek
In fact, I've implemented a key primary rely disabled on primary and unique index on the logic of the previous day.
The logic of Eve runs lightning fast now
-
Remove the scaling of fonts - need help with FindChangeList.txt
First the whole question: is there a utility or a method that will allow me to convert a saved query F/c the kind of writing required by the FindChangeByList.jsx script?
As:
text {"findWhat: '-'"} {"changeTo: '" ^ = "} {includeMasterPages:true, includeHiddenLayers:true, includeFootnotes:true, wholeWord:false} Find out all the space-dash-space and replace it with an en dash. (It comes just to refresh your memory... in fact, it is not the text string I need to help, but find/changes formatting.)
I need a quick way to go through a document and remove any instance of glyph local scale or style. That is, to turn again to 100% horizontal and vertical. This is necessary for the correct exit to EPUB (fixed provision).
A script would be great, but who, a way to write about this kind of implementation in the form of instructions to add to FindChangeByList.jsx would serve me well in the long term, as I have other similar types of doc-all of the formatting I often need to make default
Thank you
AM
For your first question, you can use the find/replace registration script...
http://InDesignSecrets.com/find-change-scripting-goodness.php -
Change the advanced title (I need help)
OK, so I'm working on a project of my own and need help. I know how to see through title so that only my title shows through the text shows my video but now I want to take this title with the below video and put that on top of another video clip. So for those who do not follow:
Clip 1 to see through text, but you can't see the video under the title of the text. Now how take clip 1 with title and just the title with 1 under the clip on another clip of overlay?
I hope that makes sense... I don't know if there is a specific name for this action, but I'm completely new to first adobe and I'm trying to understand this
put a matte key track on your video, then assign the text above it matte. See if that if what you are looking for.
-Bob
-
I forgot the password for Windows, need help
I just restarted my computer and don't remember the password is there a way to make it work?
Hello
If this is not applicable, you must reinstall the operating system.
"What to do if you forget your Windows password"
http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password
"If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
http://support.Microsoft.com/kb/189126/en-us
Tools third password
Some third-party companies claim to be able to bypass the password that have been applied to files and features that use Microsoft programs. For legal reasons, we cannot recommend or endorse any of these companies. If you want to help to break or reset a password, you can locate and contact a third party company for this help. You use these third-party products and services at your own risk.
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.
Here's information from Microsoft, explaining that the policy:
See you soon.
Maybe you are looking for
-
iMovie says I can't use with 10.10.5 osx, how can I fix?
-
Tecra R850-147 - custom Flash work tool cards
Hello I just downloaded new Windows 8 Professional 64 bit - English on MSDNA.I downloaded the drivers called Windows 8 - upgrade of official Toshiba site My question is. Why when im pressing 'fn' I can't see my screen tabs on top. Also I can not turn
-
HP 15-ac125TU (N8M38PA): Wifi Lan driver need
Hi guys, I recently bought a laptop HP [HP 15-ac125TU (N8M38PA)]. I tried many things for divers, but couldn't. Please suggest me how can I get drivers LAN WIFI for WIN8, 64 bit. Now, it's very urgent. Thank you.
-
Satellite Pro L850 - slider 'hang up' and related problems
I recently bought a L850 Pro of the Satellite with Windows operating system.When using the Synaptics Touchpad button the cursor tends to cling randomly on the screen and sometimes disappears completely. Sometimes, the ToolTip displays a small rectang
-
Hello I have a problem when I start my Hp Pavilion Admin password or power supply necessary system to disable the key: 98735144 after 3 attempts Could you please help me find a solution? Sorry if I made any mistakes in writing, I'm an old french man.