control the mouse using models

Similar Questions

• How to control the mouse cursor using EEG signals

  Hello world

  I am doing a project of cursor control using EEG signals. The idea is to find a way to all signals in a specific period of time in order to find the signal Ridge. Then, the highlight will be a parameter to control the position of a cursor.

  Can someone tell me the function that allows you to control the mouse cursor?

  I also found an old topic asking about it (http://forums.ni.com/t5/LabVIEW/Moving-Mouse-using-Labview/td-p/1285842) and I run an example of this link ( smercurio_fc) program. My cursor is stuck in the upper left corner of the screen, I can't control it again. Can you tell me how to run this program and to use the windows API?

  Thank you in advance.

  Sorry, but I can't do it for you.

  As I advised, you should take the free online tutorials. You clearly lacks the basic concepts of LabVIEW, as data flow.

  Things more: in your real applicaton does not use DAQ Assistant, screw Express are generally not optimal for data acquisition. It is safer and better use good DAQmx live. What is the equipment you use? Sampling rate, etc.?

  Why do you need to read data files? For testing? I thought that you will acquire data active, right? In your VI generate you some signals and write in a data file. Is this also for testing?

  There are several constructs in your VI which simply don't make sense.

  So again, I really suggest to go through online Core1-2 teaching material, which is accessible if you are a student, or if you have shared services provider license... It will really help.

• How to put running or OFF controls the mouse on laptop or how do I get rid of modules and toolbars like conduit, spirit and friend spark Checker?

  Hi, are two quick questions, there any settings of the mouse on laptop computers. I use a mouse usb right now about this because the finger mouse does not work.

  are there ways to activate and deactivate? and how can I get rid of modules and toolbars as auditor of conduit and friend and spark of spirit? any help would be great. Thanks in advance

  Original title: CONTROLS the MOUSE for laptop

  Hello

  Thank you for your question to Microsoft Community.

  Quick questions:

  1. What browser version are you working?
  2. What is the brand and model of the laptop?

  Case 1:

  Mouse, touchpad and keyboard problems can have several causes:

  ·         Cables that are not connected correctly

  ·         Incorrect device settings

  ·         Missing updates

  ·         Corrupt or incompatible drivers

  ·         Hardware problems

  As a first step, you can check the status of the devices by following the steps mentioned below:

  a. click Start, type Device Manager in theStart search box and press ENTER.

  b. Locate the mouse and other pointing devices and expand the same.

  c. click Pointing device and check its status.

  Method 1:

  To enable the touchpad try these steps:

  a. click Start and select Control Panel.

  b. Select mouse.

  c. click on Device Settings.

  d. Select the touchpad device.

  e. click on turn on.

  Note: The steps above are generic to any model of laptop. The parameters may vary depending on your model of laptop.

  Method 2:

  If activation touchpad does not help, you can go ahead and uninstall the drivers of the touchpad and re - install the same thing again.

  To uninstall the touchpad drivers,

  a. click Start, type Device Manager in the Start search box and press ENTER.

  b. Locate the mouse and other pointing devices and expand the same.

  c. right click on the Touchpad driver and select Uninstall.

  d. restart the computer, if prompted.

  Also I suggest you to consult the following link.

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  Case 2:

  Now for the question of the toolbar, if you use these methods follow Internet Explorer:

  Method 1:

  If an unwanted toolbar appears in Internet Explorer, you can turn it off using the Add-ons Manager. Sometimes, however, the problem may be more persistent. If the problem persists, start Internet Explorer in no add-on mode and then use the add-on Manager to disable all add-ons that you have not intentionally installed.

  You can see the following link for more information:

  Manage Add-ons in Internet Explorer

  http://Windows.Microsoft.com/en-us/Internet-Explorer/Manage-Add-ons#IE=IE-8

  Method 2:

  Most toolbars can be removed using Add / Remove programs.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Method 3:

  You can also use the specific toolbar removal tool to uninstall or remove the toolbar from the computer.

  WARNING:

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Thanks for posting the result and let us know if you need assistance on Windows.

  We will be happy to help you.

• Is there a way to control the fonts used by a remote façade displayed in a browser?

  When you use a web browser (on a system with only the TEN LabVIEW installed) to monitor a remote façade commissioned from a cRIO is a way to control which fonts are used by the browser when it displays the Panel?  In the case of a stand-alone executable, I know that you can include definitions of fonts associated with the executable 'appfont' and 'FPfont' in the INI file to control the fonts used by the executable. Is there something similar that can be done with a front panel running in a browser window?  Or do I go through the VI and explicitly define a non-generic font specific for each control and indicator that is displayed?

  What is the size of fonts in windows on the PC?  It has 125%?

  Your problem is similar to that discussed in this thread.  Set a Date and hour - week 5 months does not last line

• Can I know how to control the robot using LabVIEW? My PLC is Omron CJ1M-CPU11-ETN21.

  Hello

  I am new to LabVIEW, and I need help with the configuration between LabVIEW and the controller. My PLC is Omron CJ1M-CPU11-ETN21. I have the DSC Module and I have an OPC server as well. I create tags or even used the shared variables to try to write to the output of the PLC, but it does not work. The configuration for the ethernet Powerline had done, and I can control the PLC using CX-program via the Ethernet module. May I know what are the problems?

  Kind regards

  prchin

  Check out this webcast I hope it will be useful. http://zone.NI.com/WV/app/doc/p/ID/WV-263

  Kind regards

  Kuhn.

• Can not see the mouse using projector

  When I use my macbook pro 2015, I don't see the cursor of the mouse (I see the effects of it, though) when connected to a projector using an HDMI cable.

  There are two ways of 'classics' to connect an external monitor. One is mirrored, the other is "Extended desktop", this picture of the Watch pane arranges extended desktop. Each blue rectangle is an icon for the location of the display on your bench. If you make them slide in the same order as they appear in fact, or remember that the area of the projector is "to the right/top/bottom/left" from the main screen, you can move the mouse across the border between views and drag items to follow correctly.

  

  .

• Satellite A660 - 07P problem with the pointer of the mouse using the touchpad

  I just bought my A660 07P last Thursday, September 15, 10 and I noticed that I had problems with the mouse pointer using the touchpad.

  From time to time, the cursor/pointer is locked and seems something like a button up and down.
  I assume it's because it's on a mode of waiting, but in this case as every 5 minutes.
  When it is locked, it will also change the zoom percentage when the touchpad is struck. It is very not when I'm in the middle of something and I can not move the pointer. In addition, the start is very slow.

  BTW, I have not installed any programs or applications. I'm still testing until Friday, otherwise I'll go back to where I bought it.

  Hi mate

  This isn't touchpad problem.
  I guess as support for computer laptop MULTI-TOUCH PAD
  There are a few additional features supported by touchpad, and I think that you have enabled this while using the touchpad

  The touchpad supports the features:
  _ChiralMotion_
  You can scroll vertically and horizontally

  _Pinch Zoom_
  This feature provides functionality like the scroll wheel zooming

  _Rotating (chiral spin) _
  This provides gestures to rotate the photos and other objects

  _Momentum_
  This feature provides a smooth, fast trackball as the movement of the mouse. A quick finger on the touchpad surface can move the sliders in the entire screen.

• Pointing to the mouse using Atan2

  When I try to use atan2 for the object with the mouse, you get still a little weird.

  package

  {

  import flash.display.MovieClip

  import flash.events.KeyboardEvent

  import flash.events.MouseEvent

  import flash.events.Event

  import flash.ui.Keyboard

  SerializableAttribute public class player extends MovieClip

  {

  var xdiff:Number; declares the variables

  var ydiff:Number;

  public void Player()

  {

  This.x = stage.stageWidth / 2; Put it in the Middle

  This.y = stage.stageHeight / 2;

  addEventListener (Event.ENTER_FRAME, EnterFrame);

  }

  function EnterFrame(event:Event):void

  {

  xdiff = mouseX - this.x; modifies the variables each enter_frame

  ydiff = mouseY - this.y;

  This.rotation = Math.atan2 (ydiff, xdiff) * (180 / Math.PI); the (180 / Math.PI) transforms the radians into degrees.

  }

  }

  }

  Here is the result - the faces of lighter arrow right in symbol, with the darkest arrow Editor to the left. If when facing to the right of the object = 0 degrees, probably the lightest arrow must always deal with the mouse?

  Thanks in advance.

  I use the x / y of the arrow_mc in my example and you are so when you use 'this.x"/"this.y ':

  It's yours:

  xdiff = mouseX - this.x; modifies the variables each enter_frame

  ydiff = mouseY - this.y;

  That's fine because you use this code "to the inside of your arrow", I'm not though. I get my parent mouseX/mouseY. I make it to the scene that is the parent of arrow_mc in my example. You get this from "mouseX', i.e. 'this.mouseX" or the location X of the mouse as opposed to the arrow, not the parent.

  I don't know how your display hierarchy, but it could be as simple a fix as applicant mouseX of the parent.

  for example:

  xdiff = parent. mouseX - this.x;

  ydiff = parent. mouseY - this.y;

  Yet I know not your display hierarchy, but I think you understand that the code is not the same between the two.

• Qosmio G does not recognize the mouse using two left USB ports

  I'm right handed so I naturally put my optical mouse Saitec in the port of the right hand.

  The other day I plugged it in the ports of the two left hand and the machine did not recognize the mouse.
  He went through the process of installing the drivers (even if it was done a few weeks ago, when I plugged in the port of the right hand)

  In any case the mouse doesn't at all plugged into ports on the left side.

  Does anyone have any ideas as to why what is happening?
  Look of Sean.

  Hello

  Have you tested the two left with other USB devices USB ports. That is to say USB flash stick?
  Maybe you should do this to see if it could be a defective USP port.

  But I recommend to test this;
  First disconnect all USB devices
  Then go into the Device Manager and all the USB host controller and hubs USB remove from the list of devices.
  Close all windows and restart the laptop.

  Finally the operating system should recognize the new devices (USB ports) again.
  Connect a USB device to one of the ports on the left and check if it would work.

  Good bye

  PS: What Qosmio do you have?

• HP dm4-1160us - cannot get the right click of the mouse using my touchpad

  Hi all

  I bought my HP dm4-1160us model yesterday of staples. When I use it for the first time, I found a strange problem with the touch pad. When I click right click button on the touchpad, I couldn't see the right display context menu, also same problem with both left click button. I couldn't choose any text while pressing the left button or...

  Anyone, please help me if you know the solution for this. I'm sure it's a configuration problem, but your ideas are very important to me...!

  see you soon

  KIRU

  Hello

  It's all DONE... I found the solution.

  The problem was due to the physical development of the touch pad. New song itself came with this incoherent design. When the side of the left and right buttons on the touchpad was not seated properly, instead he pulled little as in an oblique position. Don't know why, just made a hard push down on the side buttons of the touchpad today... which is it... suddenly I heard a noise like fit inside in the correct position and now my touchpad is flat...! I tried the left button and right click on... WOW... worked.

  I have almost given up for the use of left & right click on my touchpad, instead I started to use my mouse...

  Thank you...

• Control the timeline using measures of scrolling/hit ipad

  I'm looking to create a page in the digital brochure to a customer who plays a down through an animation controlled by the user of high vertical scrolling the page.

  A similar idea to present here, but on an iPad instead of a Web site: http://slaveryfootprint.org/#sthash.yoB42KR6.9AvG3q3S.DPBS

  I don't need to control anything in the actual animation, only the movement of the washing of the timeline. The finished product should be suitable for use with DPS.

  I saw a couple of similar questions on the forum, but they all appeared to be demanding a lot more interactivity. Does anyone know a simple way to address the issue?

  The example of the communes of edge is very nice!

  Here's another example which directly controls a symbol timeline, rather than take advantage of the scroll event. It works on contact, and on the desktop with drag. The code is a bit long, so I'm not going to stick here.

  Example:

  http://www.timjaramillo.com/code/edge/parallax_touch/

  Source:

  www.timjaramillo.com/code/Edge/_source/parallax_touch.zip

• a link to the stylesheet using models

  I have a site that looks exactly like I want to on my local machine. He uses a style sheet and a model for the entire site. However, when I upload the entire site, the link to the style sheet change and is inefficient. So on my local machine, the style sheet is located in the folder root of the site and the model is of course in a models folder. In my template file, I simply reference to the stylesheet like this-... / style. CSS - and everything works fine.
  
  Then I upload it to a server and my page loses any style. During the inspection of the code, I see she's changed to designate now - templates/style.css - to get the stylesheet. Why is this happening? better yet, how can I do if the page is called on the server end and my local line? Thanks for any help!

  of course, when I have opened Dreamweaver to do as you say, guess what... everything works fine. I don't really hate computers. Anyway, sorry to have bothered you.

• Anyone know of a doc covering using ACS 5.3 to control the VLAN using GANYMEDE?

  Hello

  If someone could help with this, I'd appreciate it.

  I configured a system ACS 5.3 and all my groups etc fucniton corrcetly both for network access and for the Administration of the unit.

  However I am stuck trying to allow clients to authenticate on the page web of the router or the Web authentication, using GANYMEDE + between the router and the ACS5.3.

  I watched this and I need to configure a custom attribute of 'service' with the type bound and in relation to a permission policy.

  I think that the custom configuration attributes is where I'm stuck.

  Once agin thanks for any help

  Brian

  Your best bet is to use the RADIUS, ACS supports RADIUS and most of the time you try to users access to the network of your admins of device segment, and the best way to do that is using RADIUS versus Ganymede.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• the mouse keys. Tour of the mouse and use the numeric keypad instead. Does not work...

  I need to use the mouse instead of a mouse pad.  I followed the instructions on both pc to get the keyboard to work like a mouse, but it won't work.  What I am doing wrong?  I can't have sticky keys to work as well.

  Hi Carolynmarcel,

  1. Who is the manufacturer of your laptop?
  2. The num Lock is off?

  Follow the steps in the link that will guide you to control the mouse using the keyboard below.

  http://www.Microsoft.com/enable/training/windowsvista/MouseKeys.aspx

  I hope this helps.

  Bindu S -Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• State of the mouse with menu items that overlap control

  Hello

  I have a problem with the recovery of the location of the mouse using GetGraphCoordsFromPoint...

  I use the return status of GetGraphCoordsFromPoint to determine if the mouse cursor is over the plot of my graph control area (1) or not (0) to switch between styles of mouse (VAL_DEFAULT_CURSOR against VAL_CROSS_HAIR_CURSOR).

  It works in most cases...

  Above the Panel, there is a bar menu, located below is the xy graph. Now, if the mouse opens a menu and is the style of mouse on the menu (and also on the chart) depends on history of mouse:

  If the mouse has always been above the menu, it is not recognized by GetGraphCoordsFromPoint be loacted in the graph - which is what I would like to see, in this case of the style of the cursor is always the default style.

  Now, if the mouse leaves the menu for a short distance, the menu does not disappear (only if the mouse is to a greater distance) and acccordingly GetGraphCoordsFromPoint realizes that the mouse is over the chart. It is correct and as expected, too. (the style of the mouse is replaced by a sight then)

  Now, if I move the mouse over the menu, it is not recognized by GetGraphCoordsFromPoint, unfortunately, and the style of the mouse is not being in default.

  Am I missing something, or is there a way to fix this behavior? Styles different from the mouse on a menu is confusing for the user, and I would avoid it, of course

  Thank you...

  Hi Wolfgang,.

  It is not a very good way to work around this problem. As you found, Panel moving events are sent to the callback of the Committee even a menu is followed, and when you change the cursor of the mouse that it also affects any menu that can be active at a time.

  If the cursor changes do not at all while the menu is active, even if the user moves on the graph, there is a possible strategy don't mind you can pursue to remedy the situation. It consists of trying to detect if a menu is active, so that you do not change the cursor when the menu is active. Unfortunately, this is easier said than done. Although it is easy to be notified whenever a new menu is activated (via a menu drive recall) there is no right way to be notified when the menu disappears. And there are several ways in which it can disappear. So it is not possible to set an internal flag that tracks when the menu is active.

  However, it is possible to know if the menu is active at the time you receive the Panel move event (or in the timer tick event, although I'm not completely sure why you also use a timer). You can't do it with the UI CVI library, but you can, using the Windows SDK, in a way a little round point.

  The idea is to know which window is the top-level window. And if she is not the window of the Control Panel, then you should be able to assume that a menu is active and therefore refrain from changing the cursor. Note that you must also make sure that the active window belongs to your process, because there could be a number any other windows that might be the 'top' window at any time. But if it belongs to your process and it is not your Panel, then presumably it's the menu.

  I did a quick test with the following code and it seems to work, although you might want to test more thoroughly I did:

  topHwnd = GetTopWindow (NULL);
  GetWindowModuleFileName (topHwnd, topHwndModule, MAX_PATHNAME_LEN);

  GetPanelAttribute (Panel, ATTR_SYSTEM_WINDOW_HANDLE, (intptr_t *) & panelHwnd);
  GetWindowModuleFileName (panelHwnd, panelHwndModule, MAX_PATHNAME_LEN);

  If (! strcmp (topHwndModule, panelHwndModule) & panelHwnd! = topHwnd)
  return 0; do not change the cursor, unless the Panel is really on top

  Good luck

  Luis