Control to monitor the traffic of serial bus
Just started my hands dirty with an eval of Veristand. My tinkering goes well, but I noticed a problem potential for when I started developing my own stuff for my program. I hope someone can point me in the right direction.
If things I understand correctly, the data is passed between the target and the host form DBL scalar. If the user changes a Boolean value true, then the host transmits a 1.0000 to the target, etc. I will need to implement a set of unique proprietary for the CAN and Ethernet protocols in a device to measure. For elements such as the 'Régime' or 'State of the switch' it won't be a problem. However, this Protocol includes the ability to transmit several error codes, with their time stamp and count. In addition, the customer usually wants to control traffic bus as well.
I don't see how I can transfer cluster (or cluster table) data to the target for the transmission or the length data message to the host for display variable. Anyone raised this issue yet? All elegant ways to do other than to define channels for each possible byte of data that could be received?
Hi Dan,.
Shared variables will work, just to manage the deployment of a LabVIEW project, then you can control with the Manager of distributed systems. You can write on it using a device that is customized by using the palette of the shared Variable or create target RT in the custom device project and work with them.
Another option is to use a component of engine: you can configure engine components in the environment for a setup file settings dialog. A motor component is launched automatically whenever we connect to the target of RT. He didn't need to be called from the Tools menu.
A part of the engine doesn't have to have a special connector pane or anything like that. It can be any VI. The only special feature that there is the ability to offer synchronization options when executing the workspace. The workspace can be configured to have the following options in the synchronization with the engine components:
None: Starts the engine component but do not expect it to do anything
Waiting for synchronization: wait until the motor component to draw a Boolean notifier before and opening of the workspace. This reference of Boolean notifier must come from a Panel control before called engine synchronization.
Wait full: wait for part VI engine to complete its performance before and opening of the workspace.
We do not ship a model of engine with VS2009 components. It is located in the:
Tags: NI Products
Similar Questions
-
original title: network connections
I want to set up a link between my computor and my brothers through the internet in order to control and maintain. How can I do this >
Hello
Maybe this can help.
-
How can I download the drivers for the Universal Serial Bus controller?
After many restarts and troubleshooting tests, I had to go into Device Manager and uninstall some drivers under USB bus controllers because I was faced with a problem where my usb ports were not recognizing my mobile. I can't find drivers for usb on hp website?
HI @sazz1295 ,
Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP laptop and the USB doesn't work does not correctly. Here is a link to solve the USB connections.
I would like to uninstall all listed in the universal serial bus controllers list.
Please note remove any and all USB devices and remove the memory card in the slot of the card reader. Disconnect all non-essential devices before you uninstall the controller Universal serial bus.
Restart your computer, and then insert the USB device.
Here is a link to the HP Support Assistant. Simply download and run the application and it will help with the software and drivers on your system.
I hope this helps.
Thank you.
-
Aspire driver E5-551 Windows 7 Universal Serial Bus (USB)
I installed Windows 7 in Acer Aspire E5 - 551G, but there doesn't seem to be an operating system that is supported by ACER, because on the page to download ACER drivers, drivers are available only for Windows 8.1
I found manually and installed successfully the various drivers for Windows 7, but I'm not able to find the appropriate driver for the "pilot of Serial Bus universal (USB)", and I guess that's the reason for a USB connection that does not work.
Anyone know which is the correct driver?
Thank you
the 2 missing IDs are in the drivers VGA AMD chipset/USB (), try this:
-
How can I monitor the traffic of data cascading... As he should give me the amount of data sent or received by the cell phone/wifi network... There is a bb app world that makes so... goal im not out sort of do the same thing... no matter what sample code would be great...
Thank you
I quoted my implementation in this post:
http://supportforums.BlackBerry.com/T5/native-development/network-traffic/m-p/2303227#M13028What exactly did you use?
-
The Manager of devices-other devices-Universal Serial Bus
I have a laptop HP Envy dv7 - 7227cl. It came with Windows 8. I formatted the HARD drive and put Windows 7 Ultimate on it. I went on HP website for my model and put all drivers to this topic. I got everything to work, except the 3 USB 3.0 ports. The USB 2.0 port works fine and when I plug a USB key in it recognizes it and its proper use. When I plug a USB key into one of the USB 3.0 ports 3 nothing happens. No light on the thumb and no bubble of recognition in Windows.
In Device Manager it reads other devices under the two headings. They all have both read (USB) Universal Serial Bus controller. I tried right click and let Windows search for a driver and it says that it cannot find a. I am at a loss here. I searched and searched for a solution and don't know what to do. Any help or advice would be appreciated.Thank youHello
You have reached the right forum. I've surely you will help find a solution on the issue.
You see an exclamation point on the control of USB device drivers in Device Manager?
You can check if you can provide us with the error message for the devices in the Device Manager. Please refer to the below steps.
a. open the Device Manager by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
b. in the device, Manager find device , then right click on the name of the device and go to properties.
c. now on the general tab, check the status of the device. Let us know the status of the device. Also you can inform an error code with the State.
Drivers and download
As the computer came pre-installed with Windows 8, I suggest you to contact HP support to obtain the driver suitable for Windows 7.
Reference:
http://WWW8.HP.com/us/en/support-drivers.html
Hope this information helps. Please reply back with the State so that we can help you.
-
DV6-6b51ea: the problematic driver, Universal serial bus installation does not
Hi, is it possible to also help me find the right drivers?
This is the id of the hardware:
Universal Serial Bus (usb) controller:
PCI\VEN_1033 & DEV_0194 & SUBSYS_1658103C & REV_04
PCI\VEN_1033 & DEV_0194 & SUBSYS_1658103C
PCI\VEN_1033 & DEV_0194 & CC_0C0330
PCI\VEN_1033 & DEV_0194 & CC_0C03
Unknown device:
ACPI\HPQ0004
* HPQ0004
Unknown device:
USB\VID_138A & PID_0018 & REV_0078
USB\VID_138A & PID_0018
Also, I installed a new windows 7 64 - bit, I hardly did to install allmost all the drivers from this link:
Most of the pilots could not be installed, telling me that I am suggesting not all system requirements to install this specific driver...
I'm strugeling with my Amd Radeon graphics card install also, in device manager says: Windows has stopped this device because it has reported problems. (Code 43).
I went to the Amd Web site, I download from there is version 14.501.1003.0 for Amd Radeon HD series 7400 M (same dough I remember that I have a series of 6xxxm on my laptop). It didn't matter how hard I tried to install the correct driver, only this one worked...
A year and a half a go on my model laptop that it's really simple to get all the correct drivers drivers hp supports, but now... There are a lot of drivers than mach doesen't with my machine.
my product is: QG799EA #ABU, model: dv6-6b51ea with core i5, 6 GB of ram (if this is important).
Believe me, I've installed windows on a large number of PCs and laptops, but as mine... ever... .to fight so hard to do things... 6 hours...
Well, I hope you can help me with this. Sorry that I have several questions to a post...
Hello:
You need these drivers for devices:
PCI\VEN_1033 & DEV_0194:
ACPI\HPQ0004:
USB\VID_138A & PID_0018 & REV_0078:
The only graphics driver that you can install is this one. Do NOT install the stand-alone Intel graphics driver.
This driver installs the drivers for the AMD and Intel graphics processors switchable.
-
HP Pavilion Slimline s5-1204: replace the front serial bus
OK, so all first off I am new to the fourms to HP. Suffice to say. But 2 days ago or so I got up from my office to watch TV and I was still wearing my helmet and they were always connected. So when I got up I almost tore the helmet on the plug and now the front plug on the usb hub is heavily damaged. I was wondering if there was a way I could replace the front serial bus.
Try here get spare parts:
-
Pay attention to the catalyst control center monitoring program does not work
computer keeps displays the warning that monitoring program, catalyst Control Center does not work - what is it
Hello
· Did you make any changes before the show?
· What operating system is installed on the computer?
I suggest that you download and install the Catalyst Control Center from the AMD website and check if it helps.
-
I just reinstalled windows and I'm looking for the missing driver for my Pavilion 15, the hardware for the missing driver ID is:
PCI\VEN_8086 & DEV_1E31 & SUBSYS_196F103C & REV_04
PCI\VEN_8086 & DEV_1E31 & SUBSYS_196F103C
PCI\VEN_8086 & DEV_1E31 & CC_0C0330
PCI\VEN_8086 & DEV_1E31 & CC_0C03and it's for (USB) Universal Serial Bus controller, I tried to install the Intel USB 3.0 Host controller driver, but will not install and don't know if it's the correct driver. Would be grateful if someone could lead me to the correct driver.
Thank you.
Hello:
Download, unzip and run the file setup.exe from the link below...
-
What is controlling the traffic in LWAPP
Hi all
According to the book CISO LWAPP manages traffic between the access point and controller.
IF someone can explain to me what is controlling the traffic please?
Thank you
Mahesh
Hello Manu,
His is the detailed information on LWAPP and CAPWAP...
http://Tools.ietf.org/html/draft-Ohara-capwap-LWAPP-04#section-4.1
Let me know if that answers your question...
Concerning
Surendra
-
(satellite a60) (USB) Universal Serial Bus controller
Hello, I just formatted my laptop and now when I goto the Device Manager I see an icon missing drivers. I already have a full windows update. Its about "(USB) Universal Serial Bus controller". I tried to find the drivers to support page here to toshiba, but when I tried to install it, it says that it can be installed with SP1 and I have SP2. So my question is, where can get the drivers for it?
Thanks for any help.Hi vivendi.
have you tried to uninstall SP2, to install the drivers and reinstall SP2? -
Hello, after buying this model and the installation of new copy of win 7 x 64 im Device Manager, I have a yellow exclamation mark on universal serial bus controller driver (when I connect my optical mouse red light is flaashing, but nothing happens, it is the same with all devices on all three usb ports usb) ž
hardware ID
PCI\VEN_8086 & DEV_22B5 & SUBSYS_81F1103C & REV_35
PCI\VEN_8086 & DEV_22B5 & SUBSYS_81F1103C
PCI\VEN_8086 & DEV_22B5 & CC_0C0330
PCI\VEN_8086 & DEV_22B5 & CC_0C03Thanks in advance
Hello:
Download, unzip and run the file setup.exe from the link below...
-
Monitor the problem flashing on the reactivation of the computer.
Monitor the problem flashing on the reactivation of the computer.
I have a new HP laptop G60 - 243 CL of Costco and a new HP W2207h monitor. The screen flashes when the laptop wakes fashion "sleep" with the HDMI cable connected. It works very well with the VGA cable. Any assistance in finding the cause would be much appreciated. Here is my hardware spes and a newspaper detailed observations.
Thanks in advance,
Paul
--
HP W2207h monitor
680 x 1050 hz @60
Laptop:
HP G60 - 243 CL
AMD Turion X 2 RM - 72 2.1 GHz
3 GB RAM DDR2
320 GB SATA, 5400 RPM HARD DRIVE,
NVIDIA GeForce 8200 M G, with up to 1407 MB total graphics memory (shared).
16 "16:9 1366 x 768 display
Drive x drive LightScribe 8 with support double layer
HDMIHere is my log.
25/01/09
1 unpack the monitor. With mobile connection cables on: HDMI, USB, power Turn on the monitor. It flashes. Black for about 2 seconds, then the light for a split second, repeat, ongoing. Turn off monitor, the driver of the CD W2207h monitor, restart. Monitor works normally.
The monitor HP w2207h Readme says driver using driver Nvidia 10.65 or later version.
The Control Panel on the computer laptop G60, NVIDIA GeForce 8200 M g: Device driver 7.15.11.7614, 11/07/2008 (this is the latest driver from the HP support page. See on 27-01-08 below).
Install W2207h Monitor driver CD and restart the computer. Control Panel, device, Manager I see two monitors, the two "monitor PNP generic", first Hardware ID "MONITOR\HWP26A8", the second "MONITOR\SEC314C", both with the 6.0.6001.1840 driver (longhortn_rtm.080118 - 1840), I wonder if, maybe, the pilot did not.
2 put the laptop into sleep mode. Wake the portable computer and monitor flashes market, as described in (1). Image appears normally while the monitor is turned on for fraction of a second intervals. If reboot laptop, follow the work properly.
Occasionally, flashing monitor heal without rebooting. Out of about 10-15 tent: once the monitor began to function properly while the computer shuts down. Once the monitor was OK on the reactivation of the laptop. Once, while the screen flashes, I removed the USB cable and the monitor started working. None of this is repeatable.
3 removed the HDMI cable and started using the VGA cable and an audio cable. No more flashing on the reactivation of the computer. Very repeatable. About 7 7 times.
01/26/09
Control Panel, two monitors, Device Manager, the two "monitor PNP generic," first of all we have the Hardware ID "MONITOR\HWP26A8", second is "MONITOR\SEC314C", both with the 6.0.6001.1840 driver (longhortn_rtm.080118 - 1840), I wonder if, maybe, the pilot did not.
27/01/08
Download NVIDIA drivers
Downloaded from Nvidia support: Version 179,28, 2008-12-18, 179.28_notebook_winvista_32bit_beta.exe Beta (attention: are not supported by the laptop to the manufacturer.)
HP support: Version 7.15.11.7614 has, 2008-09-08, sp40385.exe (same version that is installed.
Version of the driver installed is the same that the one on HP support site, so did not not update driver.
w2207h monitor download driver
Download and install A Rev 2.0, 4.0.100.1189, 2008-10-16
Version of the file now reads 6.0.6001.18000 (longhorn_rtm.080118 - 1840), I think it's the same as the driver already installed.
Flashing problem is unchanged.
–
end
It was the monitor! I brought my laptop and a HDMI cable at Staples where I bought the monitor and tried on the w2207h on set. It has worked well. Took the phone in and out of fashion 'sleep' several times. I'm in the store week return policy 2 stables will replace it. The seller was very accomodating to let me try different monitors with HDMI and VGA cables and my laptop while I was there. I even brought in a large piece of cardboard to protect the ceiling :).
-
I installed win7 64 bit in 15 ac122tu laptop, but now I see yellow exclamtion on network controller, Universal Serial bus Controller SM bus controller in Device Manager.
I am not able to connect to Wifi or LAN
Thank you
Hello:
For the smbus controller, download and install the second file on the link below and restart.
https://Downloadcenter.Intel.com/download/20775/Intel-chipset-device-software-INF-Update-utility-
For the USB3 controller, download, unzip and run the file setup.exe from the link below.
Wireless (network controller):
Bluetooth:
http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_149791_1
Maybe you are looking for
-
Why am I being sent received for the purchase that I did not?
Hello I just got the second email with a purchase on iTunes Store that I have not bought, this time for a Netflix subscription. The last time I just ignored him because I have never enter my details of credit card at Apple before, so there is no way
-
my laptop has many old or obsolete files or programs on it and I want to remove them or just make more room on my computer. I would like to fix my registry problems but cannot pay the fees online
-
V525W printer will not connect wireless
I just moved and had to change my ISP. Now, my V525W printer which was working fine, will not connect wireless. When I try to reinstall the printer, the program stops after I connect the USB "put in place by cable". The CONTINUE button dark rest. I
-
I can't delete some of my e-mail address in Microsoft Live Mail
I can't delete some of my emails in Windows Live Mail, I get an error that says: "Unknown error" How can I get rid of them. Thank you Bob
-
Company 10 Show on BB 10 devices blackBerry address book
Hello and happy new year, We have 10 BB devices configured as exchange active sync email and contacts I would like to find how to show the company address book, I can put a name and press search to search in the address book, but I need to display th