Controller of domain and DNS behind RRAS without VPN connected directly to the internet with a Cisco router

Similar Questions

• I use a VPN in AirPort Express. I've updated firmware for 7.7.7 and DNS assigned by my VPN does not work anymore. Upon entry, the icon 'internet' in utility Airpot turns brown, and the internet stops completely. Anyone have any idea?

  Why my internet connection dies? I use a VPN to my internet at home. I put the DNS numbers supplied by the company VPN in my airPort extreme, which, in turn, provides wireless for home. It worked perfectly until I updated to firmware 7.7.7. Suddenly the green light next to the 'internet' in airport Utility icon went Brown, and it is therefore most all internet. I put numbers in DNS to my ISP, and internet provider is displayed again. All the other numbers in DNS, whether it's Google, OpenDNS or VPN to stop the dead from the internet. Anyone has an idea about this?

  Airport base stations, are at best, a VPN-well past that device. It is a server or a VPN client. Upgrade to the latest firmware does not change this fact.

  To create a VPN tunnel using the AirPort Express Terminal, your computer must be running a VPN client that connects to a VPN server somewhere on the Internet. What DNS servers you use should make no difference with VPN.

  If the ISP-supplied DNS servers do not work, I would say that you contact your ISP to find out why they don't allow you to use them.

  What we need to study is more why you lose Internet connectivity when changing the DNS servers of your ISP. Please check with them and to report back, then we can try to help.

• I have a p6310f and I have my cpu fan connected directly in my msu and fan controller how do I

  can say that the cpu fan has no error and fan service doesn't have a system soon error

  EDTII

  The fans (CPU and case) are attached to the motherboard for this (the sensors) headers. Connect directly to the power supply (not a ' SSM') bypassed motherboard sensor circuit.

• a computer laptop, internet is accessible only if proxyserver offline, my office internet is accessible with the proxy server. without him we cannot access the internet.

  I am faced with a kind of strange and unusual error. in my office, the internet is accessible with the proxy server. without him we cannot access the internet. However, there is a laptop computer on which some time the internet is accessible only when I leave the proxyserver only on that machine... any idea?

  Hello

  Work on a domain environment?

  Changing the proxy settings is something that you usually only have to do if you connect to the Internet via a corporate network. By default, Internet Explorer automatically detects proxy settings. However, you may need to manually set a proxy with information supplied by your network administrator.

  If you are on a domain environment then please post the question on the link mentioned below using:
  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

• I can't access the internet with any browser without proxyfire

  I can't access the internet with any browser, without proxyfire software & internet option checked to see if the proxy server is marked or not. I think I checked everything I know now I will be honerd if someone help me with this problem.

  Hello

  1. have you made changes on the computer before this problem?

  2. do you get any error code or error message?

  3. what version of Internet Explorer is installed on your computer?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the network troubleshooter, and check.

  Using the troubleshooter from network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  Try the steps in the Microsoft article and check below if the problem persists.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Method 3:

  Try the following steps to turn off the Proxy connection and check if it works.

  Follow the steps to disable the proxy:

  a. open internet explorer.

  b. click on tools and then click Internet Options.

  c. click on the Connections tab, then click LAN settings.

  d. turn off the server to use a Proxy.

  e. click on apply then Ok to save the changes.

  Hope the information is useful.

• Slow down the speed of the Internet with TC Gen 5 and Time Warner Modem

  I use the 3 TB Gen 5 Time Capsule and Time Warner Cable Modem. Recently, TWC has increased the speed of internet download at 300 Mbps. using TWC speed Test I get about 95 not only when you're using TWC Wi - Fi, but also when my iMac is directly connected to the TC by ethernet. I get almost 300 Mbps when TWC Modem is connected directly to the iMac by ethernet. I'm surprised that the speed of WI - Fi is nearly one-third, but more surprised than speed is also a third when connected by ethernet. I don't understand how the TC and TWC modem work together. My use of TWC rather that TC Wi - Fi Modem Wi - Fi has been recommended by Apple Support when they helped put in place the TC about six months ago. I don't know what I should be waiting. TWC has replaced the cable Modem so that is not the culprit. TWC also said speed of 300 the Modem must be connected directly to ethernet to the computer. There may be a configuration problem or a lack of understanding on my part. To unravel it any help would be appreciated.

  Fixed: using the TWC speed Test I get about 95 not only during use of the TC Wi - Fi, but when my iMac is directly connected to the TC by ethernet.

• I have an invalid jpeg file that appear on my screen. He got there when I moved the files to a new folder. I can't get rid of it and it remains visible even when I'm on the internet or have opened another application.

  I have an invalid jpeg file that appear on my screen. He got there when I moved the files to a new folder. I can't get rid of it and it remains visible even when I'm on the internet or have opened another application. It interferes with the applications and documents. I tried to click on (nothing happens). I have the version 10.9.5, processor speed 2.7 GHz Intel core 15, 8 GB 1600 MHz DDR3 memory.

  Have you tried a re-boot?

• I can ONLY connect to the internet with IE7 and Outlook Express

  I have Win XP SP3, home wired network, Netgear router, cable internet, Lenovo desktop.
  I can run IE 7 and Outlook Express and connect to the internet very well with these.  However, I can not connect using FireFox.  Windows Update returns an error and does NOT connect to scan my computer and display the necessary updates.  I just installed tax program this year HR CD block and it is unable to connect to internet to download the updates.  I used IE7 to go to the web site of the tax program to download the update manually, but it doesn't connect either.  I also can't complete installation OF Adobe (Digital Editions) program because it must connect to the internet in order to make a registration.

  I have disabled the Windows Firewall, do not have a configured proxy.  So, I can browse the internet with IE7 and get email with Outlook express.  I went on the site from Google Chrome to try to download it and install it that (using IE7 of course), but after I press the "Download" button, IE7 says that it cannot connect to perform the download.

  I scanned this forum and not seen similar symptoms that would allow me to reach a solution.  Everyone knows about this issue and how to resolve?

  P.S. I have two other laptops Win XP which CAN completely connect to internet with IE and Firefox via the same router and the modem cable.

  I tried trojan remover and none of the things in the menu utils found any problems.

  But it turns out that my problem was a hidden/partial copy of Symantec Client Firewall that I thought was deleted.  Over the months some programs had been updated and Symantec didn't know about them, so it was blocking their access: FROM Adobe, HR Block, IE8, Firefox, etc.  Given that I have not seen it listed in the start menu and it was not listed in Add/Remove Programs, I didn't have to try to remove it.  And it was not poping up to tell me of a new program attempts to access the Internet.

  I used the Symantec tool to remove all THE stuff of Symantec and it cleared up my connection problems.  I then reinstalled Symantec Client Security (antivirus and firewall) and turned off the Windows Firewall.

• I have a Hp touchsmart 600-1050 and I also have 3 other laptops running of the internet itself, but I get a message IP address conflict.

  I have a Hp touchsmart 600-1050 and I also have 3 other laptops running of the internet itself, but I get a message IP address conflict, why? & How can I fix this problem, thanks Aldo Zapata

  An IP address conflict occurs when two computers on a LAN (local area network) or the Internet were assigned to the same IP. IP conflicts between two computers normally make one or unusable both for network operations.

  Try below methods

  1. for networks where the addresses are fixed (statically assigned) IP, ensure that each local host is configured with a unique IP address.

  2. If your computer has an address assigned dynamically, releasing and renew its IP address can bypass IP address conflicts.

  Run the following commands in the command prompt:

  ipconfig/release

  ipconfig / renew

• Windows 8.1 in Adobe Illustrator, I tried to copy my design & tried to paste it, but after sticking the image (file), now the color looks different, drive and lighter. So, kindly inform how to paste the file with 100% same resolution / color / appeara

  Windows 8.1 in Adobe Illustrator, I tried to copy my design & tried to paste it, but after sticking the image (file), now the color looks different, drive and lighter. So, kindly inform how to paste the file with 100% same resolution / color / appearance. Thank you.

  Hi GANESHKUMARAPILLAI CHRYSTELLE,.

  Here is a link for color management workflows in Illustrator.

  It is best to place the image instead of paste into Illustrator. When you paste the images they are in RGB color format. Make sure your document is a RGB file

  Click on these links for more information.

  Understand the workflow of the CC of individual course Illustrator color management: Advanced

  Creative Suite * keeping colors consistent

  Implement the print color management workflow. Illustrator, InDesign, Photoshop

  Concerning

  Scott

• How to install a service pack after you download it, without him needing to access the internet during the installation?

  I just reinstalled xp cd, to update the service packs in order to access windows update... when I try to insatll sp1 it stops and tells me to know how to install sp without it need ing to access internet to complete...

  Try the quick link below

  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=0136e5f8-1684-4202-b2d0-c6a43430f12a

  Download the file in a folder, and then double-click it to install.

  J W Stuart: http://www.pagestart.com

• Windows 7 keeps changing home network to the public network, without pompting, in this case I can't access the internet, even though my router still receives the internet signal.

  Windows 7 keeps changing home network to the public network without asking for confirmation, this prevents me to access the internet

  Hi douglas wilson,.

  Welcome to the Microsoft Answers site!

  Since when are you facing this problem?

  We need additional information to help you better.

  Make sure that you save the settings after clicking on homepage or work profile in the network profiles.

  Strengthen the security of your computer and your network:

  Identify and resolve home network problems:

  http://Windows.Microsoft.com/en-us/Windows7/identify-and-resolve-home-network-problems

  Open network problem:

  http://Windows.Microsoft.com/en-us/Windows7/open-networking-troubleshooters

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I use google chrome and lately my screen started flashing intermittently then on the internet.  Any suggestions?

  I use google chrome and lately, my screen begins to blink intermittently during the use of the internet. It flashes maybe several times in a minute... I uninstalled chrome and reinstalled... no change. This just started about a month ago.  Suggestions?

  Chrome support

• I can't access the internet with IE 11 on my PC so I would like to download Firefox on my laptop and install it on my PC. I have been using Firefox on my laptop.

  I use Mozilla Firefox on my laptop and I would like to install it on my PC because Internet Explorer 11 stopped working. I can't access the internet so I downloaded the installer of Firefox on my laptop and saved on my PC. It initializes, but unable to connect to the internet to retrieve the program. How can I work around this problem and install your browser?

  Unfortunately, it did not work. I tried downloading earlier and it cannot connect to the internet. I need the program to install. I reset IE 10 as their recommended technical support and I even tried to reinstall, but that no longer works. I'd rather have Firefox

• Implementation of two R7000 mode bridge (1 connects them 2 the internet and all devices, use 2!)

  Hello

  I have trouble finding my drives NAS via Wifi.

  Since I moved my NAS drives to the location of my second router and connect the first router to the internet and all my mobile devices and laptops, I have problems connecting to my NAS readers. Sometimes it works, but more often, it's not.

  I've implemented the first router as "router mode" and the second router als 'bridge'

  Can I change the configuration, so that my second router is connected to the NAS drives and also works as my router for mobile devices and laptops? Then the first router just to connect to the internet and transfer it via the bridge on the second router.

  I tried this, but it doesn't seem to work...

  Concerning

  Michael

  Just to close this topic: got the solution works by using a set of powerline Netgear. It provides internet access to my router located posting the TV and works perfectly. Wireless AC is not the answer to everything, I realize ;-)

  Thanks for the discussion.