Controls are out of control in the structure of the event

Similar Questions

• My pictures are out of order in the window of the Organizer (PES 10) and I can't move them.

  My pictures are out of order in the window of the Organizer (PES 10) and I can't move them. Why?

  margielm2 wrote:

  So, if I did not albums, I can't move the images in the main window of the Organizer?

  Yes, you can not. The default order in the main window is based on the date, ascending or descending when you are in the standard "miniature". If you are in the 'folder', with folders listed in the left panel, you will see the photos in the alphabetical order of the names of files.

  I have not yet created albums.

  I have so many pictures. I wanted to put all photos in each album next to each other, so I can find them easily.

  It is not difficult to create albums and 'slide' pictures in. When an album is selected, you can move your images in order any in the Panel of the main window.

  Albums are a way to group and order photos. You should try to use keywords to organize and retrieve your photos.

• Control of the event: how to stop the race while loop within a structure of the event

  Hello

  I have some problems with control of a while loop inside a structure of the event (see annex VI).

  I have 3 buttons (the "Start measurement, stop, exit the program"). When a measure is running, it should be possible to stop the measure by clicking on "Stop the measure", but it does not work.

  Someone at - it an idea?

  Thank you very much and best regards,

  Michael

  Hi Michael,

  create a process parallel to your measurement. You can use the design model "producer/consumer with vents. You'll find it with «File-> new...» ».

  Another possibility would be to remove the "lock frontpanel" sign, in the case of event start measurement.

  Mike

• How do I know which control raised the event?

  In my program, there are six buttons that do similar things, such as changing the value of a table according to which the button is clicked. I used an event structure to do this. However, rather than repeat my codes six times in six events (one for each click of a button), I would like a case of event that meets at one of the six program buttons. The question is, how do I know which button is clicked on the inside of the box (of the key can be either false or true, then the value of the play button won't help)?

  Configure the node event property to return the ref of the object that triggered the event. The referee can be used to check if she even control using various methods (name, equal to a Ref etc.).

  Ben

• Internet Explorer plays not just... in divs are out of alignment with the other 1 px

  Hi I just finished draft of the boabdesignlandscapes.com.au site and all is good in other browsers, but of course Internet Explorer gives me a time hard and all my divs are 1 px out of alignment.  I've been over and over the code and set explicit and given widths to zero margins and paddings but can't see where the problem lies.

  I would like to reealllly reallly appreciate a look on that before go me crazy!  Thank you.

  Since then I've been able to resolve your problem in a different way. I changed your em to px width.

  Your css files should be involved in all areas:

  #header {}

  margin: 0 auto;

  padding: 0;

  Width: 1038px;

  height: 8th;

  background-color: rgb (17, 17, 17);

  }

  #container {}

  margin: 0 auto;

  Width: 1038px;

  }

  #mainContent {}

  margin: 0;

  padding: 0;

  Width: 638px;

  height: 71.8em;

  float: right;

  }

  #sidebar {}

  Width: 400 PX;

  height: 718px;

  float: left;

  background-color: rgb (109, 109, 21);

  margin: 0;

  padding: 0;

  }

  #footer {}

  margin: 0;

  Padding: 2em 0 0 0;

  Width: 1038px;

  height: 8th;

  background-color: rgb (17, 17, 17);

  margin: 0 auto;

  }

  Some of the css may be not the same as your as I was playing around with it, but it does not work. WHEB using 0 (zero) for padding, margin etc, you do not specify any unit. If the margin: 5px 0 would be 0 at the top and bottom and 5px to the right and to the left.

  Jim

• (Video included) Animation plays fine on the edge, but the objects are out of place on the export

  YouTube

  So my animation looks fine on the edge, as you can see, but stands out on export and search in the browser, the arm.

  A way to solve this problem?  I have a project on time and really need to solve this problem

  It is because of the transform-origin bug that existed in the previous version of the edge animate.

  This problem has been fixed in the latest version of edge animate.

  So, you have two options:

  1. put your lively advantage level and save the publication.

  2. If you do not want to level right now, and then add the following code in the file Untitled - just 1_edgeActions.js on the No. 15 line,.

  Symbol.bindTriggerAction (compId, NomSymbole, "Default editing", 0, function (sym, e) {})

  SYM. $("ArmGun") .css ({"transform-origin": '0% 100% 0px'});

  });

  HTH,

  Vivekuma

• is it possible to put in place a control of the event in labview to create a string indicator when you press a button

  I'm trying to implement a user interface where an operator can set the column headers for a report and I use indicators of the string as the placement for the text in the column headers.  Given that many of them will have experience with Labview, I was hoping to set a button with the ability to add or possible delete a string indicator when you press.  Is it possible to set up an event like this?

  You cannot create an indicator of the string, but you can change the visibility of the existing volumes.

  For example, you can display an indicator of the string, giving the impression that his creating.

  /Y

• I see that you are out of stock on the dashboard HP F210 camcorder. You will get over?

  Looking for HP F210 camcorder of dashboard.

  I found some at Costco and Amazon:

  http://www.Costco.com/HP-dash-camera-by-rear-view-safety.product.100082955.html

  http://www.Amazon.com/HP-F210-dashboard-accident-recorder/DP/B00EEHN7BO

• Iteration in a structure of the event on the subset of elements of control

  I have an array of boxes that I want to live inputs switch indicators.  I have two tables which cell values feed indicators.  The checkboxes indicate which table is routed.

  My options are:

  1. Make a giant list of nodes of property with the switches (30 + switch, subset, property of update)
  2. make a loop that repeats against a ring (or cluster), where the iteratable enumerates objects to watch ring + loop + 1Passez pressing sur-sous-ensemble-update

  The second options seems so much more elegant than the first.

  I think that the references will need to be more channels.  I can make chains in a cluster and iterate on the cluster.  I don't know if I can do a mass of object references.

  Issues related to the:

  • How a list of references to the inidcators that a loop is ready to go and change the values?
  • Is there any value (for the rest of the system) for me to set a delay time delay in the events of the while loop + structure?  Is it CPU free for other things if he timed it delays for the control of the event?

  Artem.SPb wrote:

  What is the Ref out of problem in table?

  

  In the case of all Boolean controls as you, it is fine.  You will have an array of Boolean references.

  If you had some Boolean references, some numerical values, strings, and built a table of these references, the table will be an array of more generic references.  So when you use the properties on them, they will simply say "control".  You will be able to work on properties that all of these controls have in common (e.g. activate or visible), but you wanted to do something more specific, such as the display of a digital format, you will need to know that your ctrlref is to a digital, then casting that make reference to a class more specific to a digital for more specific class properties.

  If it is to group references in a cluster, each item in this group will always be most specific type.

• Controls that trigger cases of timeout event structure

  In a structure of the event, we can understand the controls in the event of timeout. But if we do it this way, we do not get event data node associated with the controls. I don't know if it is a good practice and whether there are issues listed. Please comment. Thank you.

  guangdew1 wrote:

  In a structure of the event, we can understand the controls in the event of timeout. But if we do it this way, we do not get event data node associated with the controls. I don't know if it is a good practice and whether there are issues listed. Please comment. Thank you.

  A 'practice', it's what you do. You talk about a limitation (or characteristic). Event data nodes display only those items that are common to all the events of this particular event case, so for example "old/new val" is not available if there is also a timeout that is assigned. If you do not need them, it does not matter whether they are there or not.

  This often isn't a problem because you usually only the new value and you can get that by placing the terminal control inside this event.

  If you need the specific event data node, create an otherwise empty case event dedicated to control and raise the timeout event temporarily affecting the timeout to zero using a shift register. Set the time-out period to zero in the case of timeout events. If the new value is also necessary in the case of a time-out, leave the Terminal inside event newval event data node timeout usage in the case.

• Event case + while loop (the controls inside the loop will not be updated)

  Ok. I don't know what I'm doing wrong.

  But when I press Start, I can't move the slider control.

  All the obvious errors here?

  Bob123456 wrote:

  But when I press Start, I can't move the slider control.

  Your event is set to lock the front until the end of the event. This means that you are in a bind, because the event cannot be completed until the button is pressed, which can happen because the FP is locked.

  Quick "bandaid fix" would be to uncheck this option in the configuration of the event. Not recommended!

  You should never place interactive code within the structures of the event. Restructure your code accordingly. See state machines, for example.

• The audio files are out of sync with video clock?

  I record an audio book with premiere pro 2014, is therefore a larger file, then Adobe switched me to first pro 2015 and now it says that my audio files are out of sync from the video clock. I realize Adobe has no technical support so I googled a cure. They told me to remove CC 2015 and reinstall CC 2014. Of course, Adobe's download anything over three days old extremely difficult unless you are following specific steps that are simply in place to harass. Try as I could, download CC 2014 cannot be done. My question is this: How can I re - sync my files using only CC 2015? What is the best way?

  * UPDATE. Problem found! It turns out that when I opened my task manager my CPU or central processing unit, was filled to 99%. I just had to uninstall some programs needed and things much better brought.

• Computer performance are slow and unresponsive in the middle of the running applications

  Original title: Volsnap error, VSS, registry handle leaks, the drivers won't load is not etc.

  Little by little over the last few months, my computer has been slowing down, suddenly "not responding" in the middle of a program and a few other oddities.  I can't identify when this started because he was progressive.  I had to replace an old drive SSD C and when I did, I also bought a new copy of Windows 7 Prof 64 bit SP1.  Drive C is now SATA 6.

  Specs are adequate, CPU i7 930, 16 GB ram, 2 7200 1 TB WD drives each, 1 WD 'green' 2.5 SATA 6 GB, an Intel SSD SATA2 M225 and a Corsair Force SATA 6, which is the 'new' drive C.

  First mistake, as mentioned above is:
  Log name: System
  Source: volsnap
  Date: 28/08/2012-06:46:26
  Event ID: 8
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: mg - PC
  Description:
  Flush and hold writes operation on E: has timed out while waiting for a written statement of the volume control.
  The event XML:
  
   
     
      8
      2
      0
      0 x 80000000000000
     
      131589
      System
      mg - PC
     
   
   
     
     
      E:
      000000000200300000000000080006C 0000000000000000005000000000000000000000000000000
   
  

  Following error, which is quite common VSS:
  Log name: Application
  Source: VSS
  Date: 27/08/2012-22:38:52
  Event ID: 12341
  Task category: no
  Level: WARNING
  Keywords: Classic
  User: n/a
  Computer: mg - PC
  Description:
  Volume Shadow Copy WARNING: VSS past seconds 0x000000000000002b try to rinse and keep the volume \\?\Volume{51e5830d-560c-4d2f-9ed8-343e5dbe5b8c}\.  This could cause problems when the other parts in the cliché of the time-out value for the phase of release-written, and it can cause the creation of snapshots to failure.  Try again when the disk activity is less can solve this problem.

  Operation:
  The execution of an asynchronous operation

  Context:
  Current status: flush and hold writes
  Volume name: \\?\Volume{51e5830d-560c-4d2f-9ed8-343e5dbe5b8c}\
  The event XML:
  
   
     
      12341
      3
      0
      0 x 80000000000000
     
      73849
      Application
      mg - PC
     
   
   
      0x000000000000002b
      \\?\Volume{51e5830d-560C-4D2F-9ed8-343e5dbe5b8c}\
     

  Operation:
  The execution of an asynchronous operation

  Context:
  Current status: flush and hold writes
  Volume name: \\?\Volume{51e5830d-560c-4d2f-9ed8-343e5dbe5b8c}\
      2D20436F64653A20434F524C4F564C4330303030303239302D2043616C6C3A20434F524C4F564C4330303030303233332D205049443A202030303030323632382D205449443A202030303030353532302D20434D443A2020433A5C57696E646F77735C73797374656D33325C76737376632E6578652020202D20557365723A204E616D653A204E5420415554484F524954595C53595354454D2C205349443A532D312D352D313820
   
  

  Following error - register cast handles
  Log name: Application
  Source: Microsoft-Windows-user profiles Service
  Date: 30/08/2012 20:07:49
  Event ID: 1530
  Task category: no
  Level: WARNING
  Keywords:
  User: SYSTEM
  Computer: mg - PC
  Description:
  Windows detected your registry file is still in use for other applications or services. The file will be unloaded now. Applications or services that keep your registry file may not work properly thereafter.

  DETAIL-
  Register of the 1 handles user are escaped from \Registry\User\S-1-5-21-3328621373-938311138-4019764245-1001:
  800 (\Device\HarddiskVolume2\Windows\System32\winlogon.exe) process has opened \registry\user\s-1-5-21-3328621373-938311138-4019764245-1001-cles

  The event XML:
  
   
     
      1530
      0
      3
      0
      0
      0 x 8000000000000000
     
      74995
     
     
      Application
      mg - PC
     
   
   
      Register of the 1 handles user are escaped from \Registry\User\S-1-5-21-3328621373-938311138-4019764245-1001:
  800 (\Device\HarddiskVolume2\Windows\System32\winlogon.exe) process has opened \registry\user\s-1-5-21-3328621373-938311138-4019764245-1001-cles
  
   
  

  Next error - another problem of registry on the leak and be in use
  Windows detected your registry file is still in use for other applications or services. The file will be unloaded now. Applications or services that keep your registry file may not work properly thereafter.

  DETAIL-
  Register of the 1 handles user are escaped from \Registry\User\S-1-5-21-3328621373-938311138-4019764245-1001:
  800 (\Device\HarddiskVolume2\Windows\System32\winlogon.exe) process has opened \registry\user\s-1-5-21-3328621373-938311138-4019764245-1001-cles

  Last error I hope - system boot or boot startup failed to load drivers
  The next (s) starting or starting system could not load:
  UimBus
  Uim_IM
  Uim_VIM

  I apologize for this long post, but I thought that some of them might be related, and I'd appreciate any help I can get like this had been a machine very good and fast until the last month or two.

  33000

  Hello
  The three files that does not loaded at startup proved a Paragon backup facility that I had deleted.  I found in the registry and is more had this error.

  Slow and sudden episodes of "not responding" continues in safe mode, safe mode with network and boot.

  Mr. Fixit noted that I had too many programs loaded on startup that I already knew and will work hard to stop.  It has been useful in this gave me a list of the programs that did not need to start.  Some of this list was a distant base such that suggests my AV does not need to start, but some of it was useful.

  I then started to keep track of programs that seemed more likely to slow down or freeze the machine.  I reduced to one of my drives 3 1/2 inch WD 7200 and my 25 M Intel SSD.

  I ran Intel SSD toolbox and it showed no errors and no updates.  Estimated of life was about 95% and I had the car for 2 years.  There is an option to click that says "SSD Optimizer", and I suspect it is similar to a manual pad because it is one of their first records.  I "optimized" and it was immediately faster.  Intel said to do once a week or two and I never did.

  I ran HD Tune Pro on the WD and it showed a bad CRC so that a warning on the drive, which is less than a year. HD air said the drive is bad OR a cable is bad.  I had a backup, Acronis Disk which took most of the data and I also had the cloud with versioning backup.

  Knowing that the food had been replaced by a technician who had twisted power cables, because most of the readers had been asked in reverse, I attacked this first.  I turned every drive so that the connection of the power supply has been on the same side and reconnect the cable after doing my best to straighten out and flatten the wire.  I then installed a new SATA cable on the WD drive in question.

  Then, wanting to be done with it once and for all and ensuring that I could save between Acronis and my backup of cloud, I used the command line in Administrator, then to Drive E tools mode, error checking.  I ticked the boxes: analyze and attempt to recover bad sectors and automatically fix file system errors.  A reboot and the process had started.

  When you are finished, I seemed to have a catchy machine and some of the programs which often hung, is done in two days.  Programs were pretty much intact, but most of the files had been erased from the disk.  I have restored all wiped files and files of Acronis and the cloud and everything seems to work perfectly.

  Unable to help me, I ran HD Tune Pro and made a mistake (not fast) full scan on the E drive.  She came back without error.

  I know that this drive can fail again, and above all, I couldn't have been this aggressive if I had not had 2 backups.

  Do you think it will fail again?  I decided that, if so, I'll get another SSD (or two) to replace.  Although it will cost you much, I fear that hard drives are not very well made and I don't want to go through this again - and maybe not be so lucky.

  Thanks for your help and I'll post again if it fails in the near future.  Someone knows something about the new SSD Plextor?  Or would you go with Samsung?

  Thanks again.

• Loops Parallels and Structure of the event

  Hello

  Is attached a valid way to the use of the structure of the event?  I keep hearing that the case of the event should include control of the event.  Can the control be placed elsewhere?  For example, if I have 2 loops, I placed a structure of the event in the 1st loop and control associated with the event in the 2nd loop, is there a potential problem?  It is true that no matter where a Boolean with a value change is read, the Ministry of value in the event structure will be fired?  See attachment.

  This screenshot you posted should work for you fine.

  The main reason that you hear the case of the event should contain the control for the event is so that the control is read and for locking of Boolean values, gets reset when the case of events runs.

  Here since the first parallel loop runs (assuming nothing else in the loop causes the loop to get blocked), the stop button will read and reset.  The value change event will always be raised in the upper structure of event loop.

• Area hideShowHeader: how to get the name of region on Hide/Show Event

  Hello
  
  I would like to retrieve the name of the region (hideShowHeader) when I click on the hide/show icon. I know how to catch the event but some OAWebBeanConstants I always check null... any idea?
  
  Thank you very much, Pier Paolo.

  Hello

  Try to print below in LIC...

  System.out.println ("name of the event:" + pageContext.getParameter (OAWebBeanConstants.EVENT_PARAM));
  System.out.println ("the Source of the event:" + pageContext.getParameter (OAWebBeanConstants.SOURCE_PARAM));
  System.out.println ("value:" + pageContext.getParameter (OAWebBeanConstants.VALUE_PARAM));

  Thank you
  Mukesh Uchaniya

• Automated Webinar reminders an hour before the event

  Hello

  We do not use the typical WebEx or Adobe Acrobat Connect Pro for our Webinars so I need some suggestions on the establishment of an automated reminder email out an hour before the event. I tried several ways to set up in rural areas, but I'm stumped. The requirements and conditions that I have are:

  • The time change event and there is no reason to set
  • Guests can attend more than once these events and can be filed for several events at the same time
  • We can use custom Contact fields to accommodate data and imported it via CSV, or the same information is available in the maps of data/object custom
  • Registration information is not submitted by Eloqua, it is entered into our system and sync'd with Eloqua
  • We would like to do this so it is set and forget

  The challenge I have is that I am not being able to constantly evaluate the same people within Eloqua and time of the communication. Do I need to use programs for this? We have no experience with programs yet so if there is the guide who can guide me through this it would be great, thanks!

  Gary

  The best way to proceed would be in the program generator, you can configure a feeder that evaluated permanently and allow members to reinstate the program several times. I don't think there is a guide that would walk you by it, but your basic program flow would look like this:

  Step 1) no passthrough-action stage, with a charger. Your criteria for fattening would be like "Contacts where the value 'Webinar time field' is in the next 2 hours. This feeder constantly evaluates.

  Step 2) waiting stage for 30 minutes, in order to take account of the delays in the program generator, so that you get as close as 1 hour before the event possible.

  Step 3) send your message using the package step send.

  You can then make any desired treatment, or remove contacts from the program right here.

  You can do more complicated if you want, but using field blends in the email to fill out all the info of the webinar, it's pretty "set it and forget it".

  He is also a very good documentation on available on central client program generator, and I think that here on Topliners as well under the button at the top right, the Product Documentation by searching.