Converet GPT without data loss

Hello

I am formatting my system. Partition there are two in my drive C & E system. Now when I'm getting type format my PC. He is in error of TPG. I have given in the E drive, now if I use the command wipe the drive, it will clean my data. So, how can I change one partition or a full disk without data loss. We formatted our system C drive.

Kind regards

Kuldeep Singh

Hello Kuldeep,

Thanks for posting your question on the Microsoft community.

We need more information about the issue so that we can help you better.

What is the exact error message or code when you say, 'mislead the GPT?

Thank you for details on the issue.

GUID Partition table (TPG) is a new style of partitioning that is part of the Unified Extensible Firmware Interface (UEFI) specification. This is used for Windows 8 facilities factory for more flexibility of partition and

more advanced features of Windows 8. With an installation of Windows 7, the GPT partition must be removed and UEFI BIOS must be configured in a configuration to boot Legacy.

I suggest to check the following items and check if it helps.
Reference:
http://www.Dell.com/support/article/BB/en/bbdhs1/594701/en

Windows and GPT FAQ
https://msdn.Microsoft.com/en-us/library/Windows/hardware/dn640535 (v = vs. 85) .aspx

Important notes:
Converting a hard disk partition or volume from NTFS to FAT32 requires that you reformat the partition, which deletes all the data on this subject. Be sure to back up data that you want to keep before you begin.

BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

I hope this information helps.

Please let us know if you need more help.

Thank you

Tags: Windows

Similar Questions

  • My ipad is disabled. How to activate ipad without data loss? I know the password

    My ipad is disabled. How to activate ipad without data loss? I know the password

    You can not. If you know the password, how the iPad become disabled? If the device is disabled, the content is not already available. The only way to recover the device is to restore. You can restore your last backup after that. Follow the instructions in this document support. If you have forgotten the password for your iPad, iPhone or iPod touch, or your device is disabled - Apple supports

  • How to convert NTFS to FAT32 without data loss?

    Hello
    I want to format a computer with 4 logical partition, where C: is partitioned FAT (Windows NT Server), and other (D:, E: and F :) are on NTFS.

    Now I want to install Win98 on it, which requires the hard drive or FAT32 partitioned. How to do that without losing valuable data in all 3 NTFS partitioned drives.

    Hello

    I think you are very lucky.

    Aomei technology is giving away NTFS to FAT32 Converter Pro Edition 1.5 which can help you convert NTFS to FAT32 without data loss. The offer is limited from 18/05/2011 ~ 23/05/2011.
    Contest page: http://www.aomeitech.com/giveaway/ntfs2fat32.html

  • Can I partition my C: drive without data loss and transfer user files to the new?

    I have a pre-installed windows 7 Home Premium(64-bit) on a computer laptop DELL studio. Unfortunately, it only has drive C and no partition at all. Therefore, it is possible to create partitions without risk of loss of data (System and user)? If so, is it possible to transfer all the files from the user to the new one system files and all stay in C.

    Rodney

    Partitioning itself has no impact on performance. You can get slightly better performance by how you distribute folders and files on a partitioned system but I would not partition to eliminate program freezes. It's the wrong way to tackle the problem.

    There are many reasons for freezes.

    Freezes occur mainly because the task or tasks require more memory or one that is immediately available to the capacity of the CPU. The solution is to increase what is available or to reduce demand. You can do both. How to do this is much more complicated. It depends on what element of hardware is causing the bottleneck. If memory is limited, it can be simply remedied by adding RAM. If the problem is the capacity of the CPU, you will find that increasing capacity is often not practical to replace the often average CPU processor replaced motherboard, operating system and other equipment doing expensive exercise... Change the hard drive could help, but switching to an SSD is also expensive. If the processor is the problem, then demand reduction is often the way to go.

    If you are resolved to reduce the demand, it can significantly improve the performance if you delete the browser add ons such as toolbars and search engines that are not necessary. Most of the time when you install the new software you will find recommended add ons. You must learn to say no when they duplicate what you already have. Add on can hide malware, including spyware, reports how you use your computer. Do not believe the bland statements like 'works quietly in the background. It's more than one spin. Multitasking may be good, but it can provide performance problems. It translates into a surplus of supply over demand.

    Another cause of gel can be for lack of material, most commonly, the hard drive, RAM wiring associates or defective. These flaws are often easy to detect, but not always the case. You must also make sure that you have the latest version of the BIOS and motherboard drivers. They can be updated on a brand new computer if the person selling you the computer is not updated immediately before restore you the computer.

    If Frost always involves the same programs uninstall and reinstall the program, and you make sure you have the latest updates. You can also use Google to find out if others have or have had the same problem. Focus your search by using keywords, descriptions of the extracts may event viewer and limit the results to those within 12 months.  Many programs have dedicated forums where other users may be able to help.

    A gel is often the result of a malware infestation. In this case do not rely on your existing software. You need to perform analyses with software like Malwarebytes and Superantispyware. Perverse freezes may be caused by security software. Norton and McAfee are known to be involved, in particular where the computer has limited the capacity of RAM and CPU.

    Poor or no maintenance will result in poor performance. You must have a maintenance routine. This can include compaction (some e-mail programs) and should include the cleanup with cCleaner and disk cleanup and defragmentation. You must make sure that the partitions have at least 20% of disk space. You do not defragment SSDS.

    You must use the tools on your computer to look for clues as to what is happening. More you use, the more you understand what they say. The most useful tool is event viewer, although many users, it is difficult to interpret.

    You will find many sites on the internet promoting the use of registry cleaners and optimizers to maximize the performance of your computer. They are promoted by the spin and the hype. The truth is that their use causes finally grief when you use to reinstall windows to eradicate the mistakes of the system they have caused.

  • How Downgrade of El Capitan in Yosemite without data loss and without the help of a Time Machine?

    I, are looking for an answer to this question, but couldn't find one.  If there is an and missed it, please tell me and I will look happily on it.  I want to do it without the help of a Time Machine, because I used it at the time of Yosemite.  And I discovered that you can use a cable USB or SD to come down, but how do you do this without losing all my data?

    You must save, erase the drive, install Yosemite, restore your backup of the data

  • Satellite A300 - how to restore the system without data loss partition?

    Hi all

    My Satellite a * 3 partitions hard drive * as in Photo

    In the E: partition it is a hiddn folder named "* hddrecovery * ' with a lot of files and a redame file (.html) warns:
    * "HDD Recovery folder *"
    * WARNING! *
    * Do not remove or edit these files and folders.*
    * Any modification may damage the HARD drive recovery system! "*

    The last time I did system recovery using the 2 DVD (created when you first start), it was also * removed the 'D:' partition with all data files *. I'm very disappointed to lose data :_|
    Suggest me _how to make safe system restore to factory state_ * without affecting the secondary partition and its files *.

    Thank you very much.

    Hello

    AFAIK, restore (F8) image of HDD factory settings will delete all data on the C: drive. Using recovery disks it will delete all data on the local local c and D: (hard disk image file creation). If you have some important data moving to device drives or dvd external usb for all cases. That's all I can suggest

  • Install Windows 7 on a partition that include data and files without data loss

    Hello

    I have a question :

    • I've already installed windows 8 on the C partition.
    • but I also D partition with the files and folders.
    • so is it possible to install windows 7 on the D partition without losing my data in it?

    Kind regards

    No, installation on drive D will remove. I suggest to create an on C:\ partition and install Windows 7.

    http://notebooks.com/2011/02/25/how-to-create-a-simple-partition-in-Windows-7-quick-tip/

  • Add datasore without data loss

    Hello guys, for some reason any my ESX 3.5i crashed, I rebooted everything and saw that a store of data configuration (sata secondary drive), lost when I add this disc tells me that you will lose data. You can do it without losing data?

    If the drive appears in the list of disks (Configuration-> storage adapters), so I suggest that a new analysis on the adapter, including scanning for data warehouses. This should produce useful entered into the vmkernel log file.

    André

  • How to go from iPhones without data loss

    My wife died last year and I want to transfer my iPhone profile and apps phone him and transfer its stuff at 5 s.  How can I do this so I do not lose its contacts, SMS, voicemails etc.?  I looked into possible solutions on this site, but I'm so worried about losing data.  Both phones have the latest iOS update.  Can anyone help?

    any help?

  • Convert disk dynamic disk Basic without data loss on Windows 8?

    I have a laptop with a 500 GB hard drive. I have windows 8 is installed. How can I convert this disk to dynamic disk to basic disk? Is this some Partttion managers as EaseUs allow convert dynamic disk to basic disk to the disk on which the operating system is installed?

    Hi harsh,

    The disk must not have any volumes nor contain no data until you can change to a basic disk. If you want to keep your data, back it up or move it to another volume, before converting the disk a basic disk.

    Note: If you convert Dynamic Drive reader Basic with Windows installed Windows does not start.

    For more information, see change back to a basic disk dynamic disk. (Valid also for Windows 8)

    You can also post your query to Microsoft TechNet Forum for more information.

    http://social.technet.Microsoft.com/forums/en-us/home?category=w8itpro

    Hope this information helps. If you need help with Windows, let us know and will be happy to help you.

  • How do I cancel the mapping of a data store of esxi host without data loss

    Dear team,

    I want to cancel a data store that is mapped on two cluster mapping (cluster1 10 esxi host and cluster2 esxi 4 guests)



    Query1

    What step will be OK

    Disassemble = > detach = > start the activity of storage (storage poweroff) movement = > move the storage = > poweron = > join = > mounting

    or

    Disassemble = > detach = > team san will cancel the mapping = > start the activity of storage (storage poweroff) movement = > move the storage = > poweron = > san team will map the data store = > join = > mount

    Query2:

    Once I sail, I am able to see vpshere ha and dvs folder data, I just want to confirm if I want to take it apart and to separate the data store it will allow me to do it or it will throw an error, please confirm.

    Query3:

    If we remove and detach a data store, before that I have to cancel the registration of all the virtual machines?



    concerning

    Mr. Vmware

    Please find the right measures

    Query1


    before the take-off of export activity VM that are stored on the data store


    Home-online store of data and the data cluster store => select the data-VMs online store => add all columns => take export VM


    take the last export RVTool.



    stop all VMs-online you unsubscribe from all models and virtual computers-online RK on Cluster (change the setting-online data store-online here hearbeating we have to choose another data store and click OK)


    to confirm the new data store is visible as heartbeat data store select Cluster-online Sumamry-online state Custer-online Heartbeat Datastore)

    If we are able to see the new data store, then now remove old data from the heart rate data store store


    RK on Cluster (change the setting-online data store-online here hearbeating he have to uncheck the data store and click OK)


    disassemble => detach (you will need to perform this step on all esxi hosts)-online san team will be unmap-online beginning of movement storage (storage poweroff) => move the storage-online poweron-online san team will map the data-attach online store ((need to perform this step on all esxi hosts) => set up the data store)


    Register for all virtual machines


    PowerOn all VMs if get message (moved or copied) select moved.


    Query2:

    He doesn't throw any errors, will work flawless.


    Query3:

    Yes we must cancel the registration of all models and virtual computers before disassembling a data store.


    concerning

    Mr. VMware



  • Switching from Lightroom 5 CC of Lightroom without data loss

    I am currently using LR5 on my computer.

    Now I would like to spend in LR CC I have as part of the CC subscription for photographers and move the LR5 to another computer.

    How do we uninstall the LR5, so that it can be used on another computer and at the same time keep all the data (images developed, libraries) to work with them on the new CC LR?

    You are allowed to install LR on 2 different computers at the same time. If you do not have to uninstall LR 5 on the computer, on which it is currently installed.

    The installation of LR CC will be installed in a completely separate folder leaving LR 5 as it is now. It will also COPY and CONVERT your current LR 5 catalog a catalog LR CC/6 so your original LR 5 catalogue will be as it is now.

    NOTE: The CC/6 LR catalog is not backward compatible. So you can not (it's impossible) (original fault correction) open a catalog LR CC/6 with LR 5.

    Your photographers subscription also allows for the installation of LR and PS on 2 different computers as long as they are not used at the same time. So you can have the LR and PS installed on a desktop computer and a laptop computer.

  • restart m515 without data loss

    my battery wears down, I was able to recharge his batteries after about four days, and my data were included.  However, the current date and the correct date out sinc.  So, I resinc-ed with my computer (pc with windows xp).  This reset not the current date.

    Then I tried the reset button and the screen became a symbol flashing 'palm powered.  I tried a 'hard' reset by pressing the top button and click on the reset button.  The symbol flashes continued.  Then I tried a 'hot' reset by holding down the power button and hit reset.  I got a screen that asks: do you want to delete the data?  I said no and the flashing continued.  I stopped to ask for help?

    My hypothesis is that I can continue in answerring Yes, deletion of my data, and then you will be asked to re - open my device.  Is this correct?

    My concern is my data.  I should be able to recharge my camera with the data that is on my pc.  But when I sinc-ed in the past, the unit was more getting and I'm afraid that it (being blank) will remove the data that is on my pc.  I want to assure you that I did this correctly so that I don't lose my data.

    Help!

    Dave, it sounds like you need a good 'Hard Reset' on the device:

    To perform a hard reset: (Palm Knowledgebase article #887)

    http://KB.Palm.com/wps/portal/KB/common/article/887_en.html

    By now the power down button, press on and release the Reset button on the back and continue to press the Power button. When the gray Palm logo is displayed, you can release the Power button.

    You should now see the warning in 5 languages page. Press the direction upward on the 5-way keypad to perform the task. The Palm restarts several times as it re - install the original programs and erases all data from your previous.

    Normally, Palm Desktop would not write entered empty void to a PC device, but if you want to be sure, you can set all lines PIM "Desktop replaces handheld" for those you want to keep.  Click the HotSync Manager icon in the toolbar on the PC and select "Customize".  Select the lines that you want to change, click the "Edit" button, then select the desired direction.  If you do not check the 'Default' box, it will make this one-way transfer only once, then back to synchronize.

    WyreNut

  • Conslidating multiple LUNS in a single lun without data loss

    I have original started with 2-50 GB LUN as drive C and D for a virtual machine.  Since then, we have had some problems with the virtual machine and wishes to consolidate the LUN down to one 100 GB LUN with a partition C and D.

    I think that I should just clone the virtual machine through to store 100 GB data and the value of the c: 50BG then attach the drive D: current LUN and copy files to your new partition. This will be a thing of your time if this idea works and I have to repeat the process on multiple machines.

    Has anyone found a better way to run this process by cloning or svmotion?

    Thanks for the help.

    So you created 2 50 GB LUN on your San with the VMDK for C on a LUN and the VMDK for others the lun or have you created 2 50 GB VMDK for the virtual machine in a data store?

    If you have found this helpful at all prices please points using the correct or useful!  Thank you!

  • HP pavilion 2777TU g6: downgrading Windows 10 to 8.1 showed a 0xc0000225 error. How to recover without data loss?

    I had upgraded to windows 10 8.1 about 20 days back, but now I don't like the outlook and my system also became slow so I thought to go back to windows 8.1. My laptop gives error 0xc0000225. Please help urgently.

    Kkss

    While Microsoft says there is no risk in the upgrade of Win10, because they allow you to believe that you can always return to your BONES and the original installation program within 30 days, the ugly fact of the matter is that the Win10 GoBack feature turned out to be unreliable - and when she fails, she can let machines in a State corrupted - that does not always happen , but it happens often enough to be a problem and you will get no warning beforehand that he goes to the trash your PC!

    If this is not enough, the Win10 upgrade is known, in some cases, corrupt partition recovery stored by the OEM that built the original machine. It's pretty much guarantee that no HP recovery will work.

    You should probably use HP recovery media to restore your PC to its original state, and you will have to order from HP.

Maybe you are looking for

  • Satellite M30 961 modem connection problem

    Hello I'm struggling to establish a connection with the modem on all phone lines. Some lines are working and others drop immediately after the handshake. Help, please Jaco

  • Base system device driver

    Hello IM here because I need help with basic system designs drivers. Recently I reinstalled windows 8.1 on 4540 probook s (Serial: [Personal information deleted], product: C4Y85EA #BED). And I have two missing pilots of the 'base system device ': PCI

  • Find the name of the column in all tables

    How to find the name of the column in all tables in the database for any column to reveal the name of the person?We have over 1000 tables looking for.and in some places, the name column FNAME LNAME, First_NAME, DNAMEFor example we have Customer table

  • Alt in CS6 dropper is slower than on the earlier version?

    HelloI'm used to paint by clicking quickly drops alt eyepieces and paint in quick succession. Its been my method of paint on all the photoshop to CS4, I just moved to CS6 and a very annoying bug prevents me from doing this effectively.When eyedroppin

  • Merger, shared between the user - end of Permission accounts

    I'm trying to share 4 Fusion between two user accounts in Mac on a Macbook Pro/Lion.  I moved my virtual machine to the shared according to the instructions of VMWare, unbundled directory, change the permissions for everyone to read and right and he