Conversion number entry

Similar Questions

• Limited numbers on the number entry

  I'm writing a driver for some hardware and I don't know how to do something.

  There is a synchronization setting that can address a number of different things, and the format of the string commnd resembles RDVALXXXXYY.

  The chain is built with 3 user controls, one is a ring of menu which includes the "RDVAL" from a list, the following is a control number that must be 4 digits long (no more, no less) and the last of them is another control number with 2 digits, no more, nor less.

  I could just make instructions that describes the fact that the numbers must be of a certain length, but I need a way to force the digital control to accept only a 4 digit number (and a number with 2 digits in other cases).

  Configure your digital orders as follows:

   This maximum number is FFFF

  

  Do something similar for the 2-digit entry

  Ben64

• ORA-06502: PL/SQL: digital or value error: character conversion number e

  Hi all
  I work with DBLOCALE , which is

  Oracle Database 10g Release 10.2.0.3.0 - 64bit Production
  PL/SQL Release 10.2.0.3.0 - Production
  CORE     10.2.0.3.0     Production
  TNS for IBM/AIX RISC System/6000: Version 10.2.0.3.0 - Productio
  NLSRTL Version 10.2.0.3.0 - Production

  and DBREMOTE

  Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production
  PL/SQL Release 9.2.0.8.0 - Production
  CORE     9.2.0.8.0     Production
  TNS for IBM/AIX RISC System/6000: Version 9.2.0.8.0 - Production
  NLSRTL Version 9.2.0.8.0 - Production

  Leave a procedure on DBLOCALE I run SCHEMA. MYPROCEDURE@dbremote (NUMBER, stringPar VARCHAR2, datePar DATE numberPar)
  
  I use this procedure only to call a function in a package of DBREMOTE with education booleanresult: = MYPACKAGE. MYFUNC (NUMBER, stringPar VARCHAR2, datePar DATE numberPar)
  
  In the service, I try to INSERT IN MYTABLE (numberPar, stringPar, datePar) and the error

  ORA-06502: PL/SQL: numeric or value error: character to number conversion error

  is triggered.
  
  I missed something basic? Where is my mistake?
  
  I have check all types of past data and types of data in the table, that I have to insert.
  
  Any help or suggestion will be appreciated. Feel free to ask me any questions that need me to explain or for more details.
  
  Best regards
  Alex

  OraclePSP wrote:

  It starts with a page of APEX who call a procedure in DBLOCALE.

  Apex point (page) variables are all text - and bind as text variables when used in PL/SQL and SQL code.

  In this procedure, ii assess the past, then insert into a few tables@DBREMOTE without errors.
  The end of it, I'm calling the remote packaged function.
  In the function I use parameters to open a cursor and insert into MYTABLE.

  That you pass as parameters? The variable element of Apex (e.g. : P1_DATE) or do you attribute the object variable to a PL/SQL variable and the neck of the PL/SQL variable as a parameter?

  Even if I agree with you on the copy & paste I don't know what part of the process, I can speak to you.

  Well, you can try the following. Create a dynamic PL/SQL region on the page. This region should be implemented and made that the page has been sent (in other words, element variables used in the page need value for this region, for the record). You can create a condition for this region that must be met to be made - and this can check the QUERY variable, or to check if the relevant variables have values.

  In this dynamic PL/SQL code for the region block, use HTP.prn () as you would use DBMS_OUTPUT.put_line () in client-server test normal (using TOAD or SQL * more). And in this block of code, call the remote procedure.

  For example

  --// dynamic PL/SQL region code block:
  HTP.prn( 'Item P1_DATE = ['||:P1_DATE||'] 
  ' );
  HTP.prn( 'Item P1_NUMBER = ['||:P1_NUMBER||'] 
  ' );
  ..etc..
  
  HTP.prn( 'Calling remote procedure:
  ' );
  begin
    RemoteProc@RemoteDB( param1=>:P1_DATE, param2=>:P1_NUMBER );
    HTP.prn( 'Call was successful
  ' );
  exception when OTHERS then
    HTP.prn( 'Call failed with: '||SQLERMM(SQLCODE)||'
  ');
  end;
  ..etc..
  

• Text with shortcut key number entry box

  I'm simulating a scenario where the user enters a numeric value, then press the key on the keyboard to the right-aligned number +. When I put the shortcut key in the text entry box for ' keypad + ' is not submit their response even when they correct entry in the text entry box. Does anyone have any ideas on how I can get around this?

  I figured out how to do this in case someone tries to do the same. In the property of your box of text entry into the field of the correct entries, type a '+' at the end of the text input required; in the success field, select go to next slide. then set Numpad + your shortcut key. Then, when the user types the required entry and press the + key on the numeric keypad, they will go to the next page. Interestingly, the + does not appear when they enter, so it works perfectly.

• Number entry

  I was wondering, is anyway to lock the alt button (toggle it perhaps) so that phone numbers can be easily entered using the keyboard in the emails and texts and things like that?

  What would be surprising would be a numpad screen on the right side of the screen in addition to the keyboard. But I know it's probably less likely that control the thing by simple will power! :-)

  Love my Dext, I'm a little older that it was perhaps designed to (25), like the look of the droid, but it's just a little bulky for my taste. 18 months is not long to wait for something better to come in the world of phones.

  Off topic, but would also second support for an Android 2.0 update. Or even an option to install a ROM official Motorola created without the blur from the 2.0 if that's what maintains back. (Yes I know it came out 5 minutes ago but something like that could change a huge number of people moaning in Motorola Fan boys and girls (including me), and be much more effective marketing that spending money on a second 10 Add)

  If you double-click the button Alt the cursor turns to a triangle in a triangle open (open on the top flat side - like a V) and this puts you in 'Alt' mode if you can type numbers until you press Alt again.

• String conversion number

  Hi all

  I need to convert the string like "-73.28" to the number - 73.28. With decimal string to number Vi I get only - 73,00 output with "-73.28" Dim input As string. What I've done wrong? How to get the required results? Also, note that it must be. the number of output!

  Thank you!

  Hi Nina,

  Firstly: have the decimal separator ',' in a digital indicator is just for aesthetic purposes, you can always calculate using the value...

  (1) you can change the settings of the operating system (Win: settings regional aka regional Einstellungen). I do this for all my computers as it seems "natural" for me when working with scientists/measurement data

  (2) you can move LV to ignore the decimal separator system settings - you will find in the dialog box options...

  But when using properly formatted output functions you do not need to change any setting...

• Conversion number to a hex string

  Hello

  I want to send a command string hex to a device via the serial port. The chain includes a fixed part (address, function, register) and editable part (setpoint). The fixed part is a string constant hexa (0106 0022) the editable part is a number (1000) converted to string hex (03E8). Finally, the two are coding pour get the final string. The problem is that instead get: 0106 0022 03E8, I get: 0106 0022 3033 4538.

  After concatenates two strings, it seems that the second part is turned into ASCI.

  I can't find the solution!

  Thanks for your help.

  Sorry, I saved the vi in a different version.

• Conversion number

  I have a BI imported table using ODBC 3.5 and OCI10g / 11g, they have the same results.
  
  My column number (10,0) is available as a double. Thus, 579 is now showing that 579,0.
  
  I tried to change the data type of int column, always 579.0.
  
  How can I get rid of the fuite.0?
  
  Thank you
  Kathy

  You can change the data type in the column properties (answers), tab type data, override datatype checkbox, no decimals to 0.

• conversion number need help

  Hello

  I have this string.

  23.527705

  can someone help me with this? I know I should know how to do this, but I can't seems to think properly now. been 3 hrs trying this.

  I need to round 24?

  Like this:

  

  Alternatives to the rounding to the nearest are round worms + infinity and round - to infinity.

• string conversion number in Unix

  I'm extremely sorry to post this here. I googled a Unix category for this post here. But could not find one.
  I have a string in Unix. I need to remove characters from the string.

  var=2012/03/26
  I need to remove the special char's('/') from the string. It should be 20120326. 

  I tried expr substr, but did not get the result.
  
  Sorry again to post in the wrong category.

  Try

  newvar=`echo $var|sed 's/[^0-9]//g'`
  

  Who's going to shoot anything that isn't a digital character in the string in the variable ${newvar}.

  Seems you watch a channel that will (eventually) be interpreted as a date, what happens when the string 'date' lack of zeros? It won't be pretty.

• Entry number of HTML does not accept the figures after the decimal point

  I use html5 number entry type. But do not accept the figures after the decimal point. Any suggestion welcome. Thank you

  The below HTML syntax works with the last update BB10.

• ADF BC entity UIHints Format Number telephone number

  Hello

  I would like your help to attribute entity ADF BC so number formatting when I add this attribute in a user interface (such as the text in the form of entry or table for example), the number is formatted for a U.S. phone number. For example, in the database, I have a UserPhone of type Number field (10,0) with values (1112223333). In the user interface (and only the user interface), I would like to show that it formatted (such as 111-222-3333) to the user.

  I added the trainer next to formatinfo.xml for the Number type;

  <FORMATTERS>
     <DOMAIN class="oracle.jbo.domain.Number">
        <FORMATTER name="Number" class="oracle.jbo.format.DefaultNumberFormatter">
           <FORMAT text="0000" />
           <FORMAT text="####" />
           <FORMAT text="####;(####)" />
           <FORMAT text="0000;(0000)" />
        </FORMATTER>
        <FORMATTER name="Phone" class="oracle.jbo.format.DefaultNumberFormatter">
           <FORMAT text="000-000-0000" />
           <FORMAT text="###-###-####" />
        </FORMATTER>
        <FORMATTER name="Currency" class="oracle.jbo.format.DefaultCurrencyFormatter"/>
        <FORMATTER name="Percentage" class="oracle.jbo.format.DefaultPercentageFormatter" />
     </DOMAIN>
  ...
  
  

  And in the entity of the user, the phone attribute, to the UIHints tab, I change the attribute phone Format Type to the phone and select one of the two phone trainer. This is the attribute ID Entity:

  <Attribute
      Name="UtilisateurTelephone"
      Precision="10"
      ColumnName="UTILISATEUR_TELEPHONE"
      SQLType="NUMERIC"
      Type="oracle.jbo.domain.Number"
      ColumnType="NUMBER"
      TableName="UTILISATEURS"
      Scale="0">
      <DesignTime>
        <Attr Name="_DisplaySize" Value="20"/>
      </DesignTime>
      <Properties>
        <SchemaBasedProperties>
          <LABEL
            ResId="model.Utilisateurs.UtilisateurTelephone_LABEL"/>
          <DISPLAYWIDTH
            Value="50"/>
          <FMT_FORMAT
            ResId="model.Utilisateurs.UtilisateurTelephone_FMT_FORMAT"/>
          <FMT_FORMATTER
            ResId="model.Utilisateurs.UtilisateurTelephone_FMT_FORMATTER"/>
        </SchemaBasedProperties>
      </Properties>
    </Attribute>
  
  

  And the lines of ModelBundle:

  model.Utilisateurs.UtilisateurTelephone_FMT_FORMATTER=oracle.jbo.format.DefaultNumberFormatter
  model.Utilisateurs.UtilisateurTelephone_FMT_FORMAT=\#\#\#-\#\#\#-\#\#\#\#
  
  

  The problem is that the UI text entry field is showing always bad formatting as 1112223333 - and never use the phone.

  I use JDeveloper 12.1.3 and Java 1.7.0_51

  Any help or reference would be greatly appreciated

  Thanks in advance,

  Yolaine

  This message was edited by: Y Courteau

  I guess it won't work because the indicators are not applied when you enter something. You can use a custom converter (validation and conversion of entry) that you apply to the field where you show the exit number use you http://www.oracle.com/technetwork/developer-tools/adf/learnmore/dec2010-otn-harvest-199274.pdf 'get social security numbers right.

  Timo

• String MySQL DateTime to the number

  Hey... I have a problem with mysql date-time conversation number string.

  ID like converse in digital format date excel.

  My LV conversation for beginning 2013-01-22 10:00 is 3, 44169E + 9 and for

  the same day in a conversation of exel is 41295,4166666667.

  Why is this?

  TNX for your explonations.

  LV: "seconds that have elapsed since 12:00 a.m., Friday, January 1, 1904.

  Excel: "days since January 1, 1900 00:00".

  If you have a scale of 86400 and the shift of 1461 days factor (assuming that 1 year scot)

  /Y

• Hexagonal n.o decimal whole conversion?

  How to convert 1 byte hexadecimal n.o in decimal form to the decimal integer of 8-bit data.

  Hello

  You can use the hexadecimal number fucntion. This option is available in - programming > String > String Conversion/number.

  Alternatively, you can search for hexadecimal number conversion.

• Exception: "could not validate SAML token.

  We have a configuration of rating system that we use to generate a PDF of Psalm we you connect through the EJB client and usually have had no problems. Until today. At some point today we started seeing some exceptions are thrown on the client:

  Caused by: com.adobe.idp.um.api.UMException | [com.adobe.idp.um.api.impl.AuthenticationManagerImpl] errorCode:16421 errorCodeHEX:0 x 4025 message: SAML - Assertion impossible to validate the token has expired and therefore not valid for user [administrator@DefaultDom]. Its valid until time [kill Feb 04 10:58:45 MST 2014] turns out to be before the current time [kill Feb 04 16:04:41 MST 2014]

  Bounce just the application server running the client code has solved the problem, but we would like to better understand what is happening and why. Nothing of what I can find in the docs seems to indicate the cause/solution and possible solutions have links which seem to no longer work: http://cookbooks.adobe.com/post_Renewing_the_context_to_handle_session_expiry-16410.html

  Any suggestions or insight would be greatly appreciated. Thank you!

  PROBLEM

  Using the same instance of ServiceClientFactory to call remote services exposed by the LiveCycle container can lead to

  exceptions related to the expiration of the assertion

  Solution

  To handle the timeout use the ThrowHandler mechanism provided by the ServiceClientFactory framework

  Detailed explanation

  LiveCycle provides a client sdk for java-based client call its services remotely.

  An invocation involves the creation of an instance of ServiceClientFactory setting user credentials in thefactory instance passes this factory to a customer of service or creating an InvocationRequest directly

  Use the client to perform the actual request.

  For more details, see Invoking

  LiveCycle ES using the Java API .

  An instance of ServiceClientFactory once created is valid for a certain

  period of time that is default 120 min., if the same instance is used to call beyond that period, while he leads to an exception indicating that

  the session has expired [com.adobe.idp.um.api.impl.AuthenticationManagerImpl]

  errorCode:16421 errorCodeHEX:0 x 4025 message: could not validate SAML

  Token - Assertion has expired and therefore not valid for the user

  [administrator@DefaultDom]. Its valid until time [Thu Oct 22

  17:07:53 IST

  2009] turns out to be before the current [Thu Oct

  [22 17:58:18 2009 IST]

  This isn't a problem if the ServiceClientFactory instance is used for a short time. However if you want to make a long

  the task as great conversion number of documents to PDF, applying the policies their etc., then it would be a problem.

  Session time-out

  Before fxing the question some info on what is session time-out.

  • When you use an instance of ServiceClientFactory to invoke service suite fow arrives
  • You set credentials in the properties and call the service
  • LiveCycle server side validates the credentials and issues a context. It's the kind of a ticket which can be reused later rather than the actual credentials.
  • After receiving the response from the server the ServiceClientFactory instance deletes its own copy of credentials and instead stores the context for calls more later on that this instance of context is passed instead of the credentials of the user
  • This fow everything is done to ensure that the credentials of the user are not sent for each remote call, thus improving security.

  For more information about the context, refer to

  Identity of the user in LiveCycle .

  Solution

  Fx this problem you need to re authenticate to LiveCycle and get the context new draw. the best way to do this is to use the ThrowHandler provided by the ServiceClientFactory framework

  Step 1 - create a Throwhandler

  ______________________________________________________________________ ______________________________________________

  /**

  * This ThrowHandler caches the credentials of the user and use them

  to update the framework in the

  * ServiceClientFactory to expiration.

  */

  private public static class SimpleTimeoutThrowHandler implements

  {ThrowHandler}

  private String username;

  private String password;

  public SimpleTimeoutThrowHandler (String username, String

  {password)

  me.username = username;

  This.password = password;

  }

  public boolean handleThrowable (Throwable t, ServiceClient

  SC,

  ServiceClientFactory EFC, MessageDispatcher md,

  IR InvocationRequest, int numTries) survey

  {DSCException}

  {if (timeoutError (t))}

  The call to AuthenticationManager does not require

  the authentication if the default properties

  are the people

  AuthenticationManager am =

  New

  AuthenticationManagerServiceClient (ServiceClientFactory.createInstance (getDefaultProperties()));

  AuthResult ar = null;

  try {}

  AR =

  AM. Authenticate (username, Password.GetBytes ());

  } catch (UMException e) {}

  throw new IllegalStateException (e);

  }

  Context ctx = new Context();

  ctx.initPrincipal (ar);

  Refresh the ServiceClientFactory instance with

  the new context

  scf.setContext (ctx);

  Logger.info ("refresh the related context

  ServiceCLientFactory");

  Now say CFS to try again, the invocation

  Returns true;

  }

  Check so that we do not again wrap the exception

  If (t instanceof DSCException)

  throw (DSCException) t;

  If (t instanceof RuntimeException)

  throw (RuntimeException) t;

  How is it possible to get that much?

  throw new IllegalStateException (t);

  }

  Private boolean timeoutError (Throwable t) {}

  If (!) () t.getCause () instanceof UMException)) {}

  Returns false;

  }

  UMException EU = t.getCause ((UMException));

  Check that UMException is due to the

  expiry of the assertion/context

  if(UMConstants.errorCodes.E_TOKEN_INVALID ==)

  {ue.getErrCode ()}

  Returns true;

  }

  Returns false;

  }

  }

  ______________________________________________________________________ __________________________________________

  This ThrowHandler would be invoked by the ServiceClientFactory to receipt of any exception. The manager would then determine if it's a timeout on the exception and then update the context associated with the instance of the factory and told him to retry the invocation.

  STEP - 2 record Manager

  ______________________________________________________________________ __________________________________________

  ServiceClientFactory.installThrowHandler (new

  SimpleTimeoutThrowHandler (username, password));

  ______________________________________________________________________ __________________________________________

  Note: the Manager should be listed only once in the application

  STEP 3 - make your invocation

  Following example would try to apply policies to all the fles present in a directory

  ______________________________________________________________________ __________________________________________

  Properties p = getDefaultProperties();

  p.setProperty (DSC_CREDENTIAL_USERNAME, username);

  p.setProperty (DSC_CREDENTIAL_PASSWORD, password);

  EFC ServiceClientFactory =

  ServiceClientFactory.createInstance (p);

  Now, to make a long running operation

  String inputDirName = "path-of-entry-dir";

  String outDirName = "path - to the-out-dir";

  String policyName = "the-policy-name ';

  Download the file = new File (inputDirName);

  Folder outDir = new queue (outDirName);

  RightsManagementClient rmClient = new

  RightsManagementClient (CFS);

  DocumentManager docManager = rmClient.getDocumentManager ();

  Iterate over all in the inDir pdf and apply the

  policies. If it takes a

  {for (file pdfFile: {inDir.listFiles ())}

  The inDoc document = new Document (pdfFile, false);

  Document securedDoc = docManager.applyPolicy (inDoc,

  pdfFile.getName (), policyName, null, null, null);

  securedDoc.copyToFile (new

  File (outDir, pdfFile.GetName ()));

  }

  ______________________________________________________________________ __________________________________________

  Now the invocation would end even if it takes a lot of time. If any session time-out occurs then our ThrowHandler would take care of it.

  Here's a sample:

  TimeOutSample.zip