conversion of back for win 7 to win 10, don't reboot on my laptop Acer 5253 help!

Similar Questions

• ENVY of HP dv6-7215tx Notebook PC back for win 7

  Somebody has experiences in return HP dv6-7215tx Notebook PC ENVY come back to win 7 HP with any success, win 8 just don't do it for me?

  Main prob trying to get around the raid drivers.

  Hello:

  See if it works...

  Download the drivers from this link below (first or second file listed - 32 or 64 bit depending on the case).

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=2101&DwnldID=23060&keyword=Intel+RAPI...

  Extract the files on a usb flash drive.

  With the flash player and the installation of W7 media connected to the computer, boot from the installation of W7 media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and hopefully W7 should install.

  You can then use all the W7 x 64 drivers and software by the dv7t-7000.

  DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5273547

• Decommissioning Win 8 for WIn 7... G6-2210US laptop

  I found the base for this laptop drivers but am still missing USB drivers PCI device, SM bus controller driver.   I'm looking for Win 7 Pro 64 bit drivers (except 32-bit will work).   Can someone direct me to it?  It's on a laptop based AMD, using the A4 Vision chipset.

  First, install the AMD chipset driver and restart.  First download listed.

  http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2

  Then, all the W7 x 64 drivers for this model of the G7, which has the same material as your should work (except the graphics and the BIOS files - they are not for your PC, so do not use them!).

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5275620&...

  The PCI device is the card reader found in the storage section.

  This W7 x 64 graphics driver may work if you need the graphics driver.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5262610&swItem=ob-107649-1&mode=4&IDX=1

• Want to go back for Win 7 after the installation of Win 8

  Hello!

  2 years ago, I bought a toshiba laptop satellite L series.
  It came with a win7 64 bit os and a folder HDDRecovery on hard disk, no cd.

  I have used this cover several times before, no problem with that.

  Then I bought 8 Win and installed on my computer, removal of Win7.
  But I want to go back to Win7.

  I tried to press 0 at the beginning for the recovery, but it did not work. Pressing 0 will not activate HDDRecovery

  In addition, F8 at startup no longer works with the advanced startup options. I tried to copy all the contents of the folder HDDRecovery on a usb key and start with that, but he said: "no operating system found, displug all devices and restart etc.»

  So, the problem is, I can't use HDDRecovery. It is a record around 8 GB. I have it, but can not activate the recovery.

  I hope some1 can help

  Thank you

  Hello

  Looks like you made a BIG mistake because you have not created the recovery din mentioned user manual disc / reminder on screen, etc.

  The fact is that recovery of HARD drive was an option of additional recovery next to recovery disk but drive HARD recovery does NOT work after the HARD drive has been formatted, modified or another operating system installed.

  If not, you have just one option: you have to order a recovery disc that contains Win 7
  http://backupmedia.Toshiba.EU/landing.aspx

• drivers for win 8

  Hello

  I can't find driver for other devices-Unknow device driver for win 8. He is absent. Please can enyone help me?

  ACPI\VEN_HPQ & DEV_0004
  ACPI\HPQ0004
  * HPQ0004

  Hello

  Must be the Protection of the HP ProtectSmart hard drive on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp58001-58500/sp58423.exe

  Kind regards

  DP - K

• Satellite A300-1MT: where to download for Win XP Toshiba face recognition

  Hello. I bought Satellite A300-1MT, but installed Windows Vista does not suit me.
  I am install Win XP. I found all the drivers on the toshiba web site. But cannot find Toshiba face recognition.
  Please advice me something!

  Hello

  I fear that you will not find this tool for Win XP m.
  It seems that this function can be used only under Win Vista OS.
  If page European driver of Toshiba does not provide these software for Windows XP, then you won't be able to find it on other sites

  So I see only one solution; back to Vista if you prefer to use!

  Welcome them
  Jack

• Satellite A300D-15B PSAKCE - cannot install the audio driver for Win XP 64 bit

  Hi all

  This is my first post here after hidden during the last week or so, my hope is that somewhere it helps and hope so!

  I have a wonderful Toshiba A300D-15B PSAKCE with RAM 4 GB/O, but I suffer from some problems RESEARCH Holy function cannot resolve. I use this laptop as a box of development for uni/work unfortunately...

  After a complete nightmare and Vista32, Vista64, I decided to go back to windows XP32, however this custom install, continues to claim a failure of a CRC file after (and Yes, that's with SATA in IDE mode and a disc of XPSP2)

  I decided that I really DON'T want to goback to Vista, so installed Windows XP64. Now the first installation is very easy, I have the basic configuration, the chipset, graphic, network, CPU, usb, fine... except basic... and that's where I lost most of my hair... SOUND!

  First try to install the results of the pilot of his failure, claiming the mmdriver.inf cannot be found or corrupted, obviously I checked, and yes there it is, downloaded pleasure the MMDRIVER. INF and placed it system32 and the installation always fails.

  I also tried a "manual installation", in .inf files... which includes pilots XP32/64 and Vista 32/64 bit drivers, still the same
  problem, the driver continues to not install. I am going bald. Exceptional drivers who moved there

  * - Audio device on High Audio Defninition Bus *.
  * - Mass Storage Controller *.
  * - Modem Device on High Audio Defninition Bus *.
  * - USB device *.

  If what follows is any help, (Sandra 2008)

  * - Disk controller *.
  (AMD (ATI) SB700 SATA Controller [IDE Mode])

  * - Disk controller *.
  (Toshiba SB700 IDE)

  * - Audio device *.
  (Toshiba IXP High Definition Audio Controller)

  * - Audio Codec *.
  (Conexant Systems 5051 hours)

  * - Audio device *.
  (AMD (ATI) [Radeon HD 3600 Series] RV635 Audio device

  Now, as I write this, I heard the rumor that the A305D uses the same
  audio/graphics drivers... Well well... off to try something I guess...

  If there is no help or ideas, I'd appreciate it.

  Hello

  The laptop seems to use the Conexant audio chip. So, you will need the right sound driver for Win XP 64 bit.
  Unfortunately, the European driver Toshiba page provides the drivers for Win XP but I don't know if the pilots would cover the OS 64 bit as well m.

  Anyway, what you need to know, is that you will need to first install the patches Ms.
  The fix KB835221 and KB888111MS must be installed before installing the audio driver.
  If you have tried to install the driver, then remove it from the Device Manager and update Windows XP first!

  AFAIK that SP3 already contains these patches then perhaps you should install SP3 first before starting with the installation of the audio driver.

• I get a message that Generic Host Process for Win 32 Services has encountered a problem and needs to close. How can I get rid of this? It freezes everything up.

  I don't really know what the good topic for this problem.  I get the message that Generic Host Process for Win 32 has encountered a problem and needs to close.  I need to get rid of it because it freezes everything up.  No matter if I send or not send the message to Microsoft.

  Hi ArdythPhillips,

  ·         Exactly when you receive this error message?

  ·         You did it of any material changes or software on the computer before this problem?

  This problem may occur if you use an old HP printer driver or an old HP scanner driver.

  If you are using an HP printer, you can follow this link.

  Generic host process error message and a flashlight icon appear

  To improve the performance of the computer, you can follow this link & check if it helps.

  Restore the performance of your computer with Windows XP

  Hope the helps of information.

  Please post back and we do know.

• Does anyone have a solution to error 80096001 for Win VISTA

  Does anyone know a quick fix to the error 80096001 for Win VISTA?  Please answer as soon as POSSIBLE

  Hello, Pauledwards007,

  Is - this related to Windows Update?

  Run the update for your version system preparation tool - may have to run it twice

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-system-update-readiness-tool

  Retry updates

  Reset the Windows components - first of all, use 'default' mode then go back and use the "aggressive" mode

  http://support.Microsoft.com/kb/971058

  Retry updates

• Lost metadata when transfer of Win Vista/WMP 11 for Win 7/WMP 12

  Hello

  After I moved all my music library from Win Vista/WMP 11 for Win 7/WMP 12, I note that several metadata is lost. For example all the values in the PlayCounts and stamp fields have been updated with 0/white. Before the transfer I backed up all the metadata using the metadata (http://www.dalepreston.com/Blog/2007/03/windows-media-player-metadata-backup.html) backup program which I was recommended to this forum. But when I try to restore I am not able to run due to the restoration, the button is grayed. I change all the file/folder names.

  I also noticed that the KeyField field existence more in the library. Is it possible to restore these values to the new database?

  Very grateful for any help to recover the missing data!

  Already answered in the forum of backup metadata:

  http://sourceforge.NET/projects/metadatabackup/Forums/Forum/1105147/topic/4094696

  Tim Baets
  http://www.BM-productions.TK

• Missing driver for win 7: qlfcoei.sys

  Original title: lack of driver win 7

  Missing driver for win 7: qlfcoei.sys. Withou it cannot update w 7 w 8.1

  Karisik P

  Hello Predrag,

  Thank you for visiting the Microsoft Forums.

  I understand that the problem with the upgrade of your Windows 7 computer to Windows 8.1 due to a hardware device driver. I would certainly like to help you with this.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. What is the brand and model of your computer?
  2. Do you have any QLogic device plugged into your computer?
  3. What is the accurate and complete error message you get on this driver?

  qlfcoei.sys. these files more often belongs to the QLogic FCoE Stor Miniport Driver from Inboxproduct. and are most often between QLogic Corporationcompany. These files usually have description QLogic FCoE Stor Miniport Driver from Inbox.

  I suggest to remove all unnecessary programs installed on your computer and run System File checker to check on any integration of file system and get automatically replaced by the correct file.

  The command sfc/scannow (System File Checker) analyses all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Follow the steps outlined in the article below to run the (SFC Scan) System File Checker tool. It will have to open the prompt as an administrator, the article below explains how to open the prompt as an administrator.

  Use the System File Checker tool to troubleshoot missing or corrupted system files.
  http://support.Microsoft.com/kb/929833/en-us

  Also check the updates and make sure that all important updates are correctly installed.

  Updated drivers

  You can see the article below to help update the drivers for hardware devices creating problem.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  I hope this helps. Do not hesitate to write back for any further assistance with Windows, we will be happy to help you.

• questions about the decommissioning of win 8 for Win 7

  I plan to install Win 7 Pro on my Win 8.1 on my desktop computer. My computer came preloaded with Win 8 and then I upgraded to win 8.1 by using Windows Update in Control Panel. So I have the computer manufacturers 64 bit Win 8 Support disc that came with the computer, but no Win 8.1 disk. I also have my old drive for Win 7 64-bit. My main concerns regard the problems potential decommissioning and also possible future problems if I decide to come back to Win 8 (regardless of the version then in force).

  I have two questions:

  (a) there will be problems if I decide in the future to upgrade Windows 7 Pro to whatever the current version to win 8 given that I only have my Win 8 of the manufacturer of the computer drive?

  (b) in addition to needing all the drivers for Win 7, are there other problems by going win 8 for Win 7?

  If you want to downgrade to Windows 7.

  You will first need to go to the website of manufacturers for your model computer and first find out if there are native drivers in Windows 7. A large number of computers that are preloaded with Windows 8 have no native driver support for Windows 7 by the manufacturer.

  If there are native drivers for Windows 7, there should be a problem.

  Prior to decommissioning, I highly recommend facility backup the Windows 8.1 currently on the disk, so if you decide to go back to Windows 8, you can simply save your data in Windows 7 and restore the image of Windows 8.1. Learn how to:

  How to create the System Image in Windows 8.1

  Decommissioning:

  http://www.PCMag.com/Article2/0, 2817,2417359,00.asp

• Try to install the update for win 7 error code windows service install could not be accessed

  I can't indtall a program

  Try to install the update for win 7 error code windows service install could not be accessed.  Insatller Windows is not installed correctly.

  Try to make sure that the Windows Installer service is running, or force start it.

  1 open run and type services.msc, and then press ENTER. You can also go
  to the Panel of control-> Administrator Tools-> Services.

  2. in the installation list services, locate Windows Installer.

  3. check that the status is started. If the condition column is empty,
  Right-click Windows Installer, and then select start.

  4. If you get the error trying to force starts the Windows Installer service,
  try to change the Startup Type to automatic (default is Manual), then
  Restart the computer.

  You can also give the following a try, make sure that you back up your Windows registry database before you try:

  7 How do I backup the registry in Windows

  http://blog.thinksharp.nl/2009/03/08/WindowsInstallerHELLOnVistaX64PlatformsAlsoFixesITunesInstallProblem.aspx Change of the

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSIServer\WOW64 key from 1 to 0 got my install iTunes work.

• This copy of Windows is not genuine I have Win 7 Home Premium doc & key that came with the pc but no disc, can I come back to win 7 HP?

  Bought an ASUS Eee PC a few months back - a well - was inactive for a few months and now has the following message displays on the screen "this copy of Windows is not genuine" - riddle previous owner installed Win 7 Professional w/o legitimate key? I have Win 7 Home Premium doc & key that came with the pc but not the Windows 7 installation disc. Is there one had to return/restore Win 7 HP without the original disc for Win 7?

  Adding infrom of win diag tool:

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 50
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - CM74G - RPHKF-PW487
  Windows product key hash: 71BRYMECVaSXedfumfu8zryHJVY =
  Windows product ID: 00371-177-0000061-85265
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 6.1.7600.2.00010100.0.0.048
  ID: {C258D6DC-FCEC-4D78-A6AE-D0290D63818A} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0x00000000
  Build lab: 7600.win7_gdr.120830 - 0334
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 103 blocked VLK
  Microsoft Office Visio Professional 2003 - 100 authentic
  Microsoft Office Enterprise 2007 - 103 blocked VLK
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: B4D0AA8B-604-645_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Users\admin\AppData\Local\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {C258D6DC-FCEC-4D78-A6AE-D0290D63818A}1.9.0027.06.1.7600.2.00010100.0.0.048x 32*-*-*-*-PW48700371-177-0000061-852655S-1-5-21-3606206582-1294634331-2799272895ASUSTeK Computer Inc. 1005PE American Megatrends Inc.. 0401 20091110000000.000000 + 000B8B83607018400F404090409Eastern Standard Time(GMT-05:00)03_ASUS_portable103100Microsoft Office Visio Professional 2003118DD0A165A1C2500EhKkzIViDaNcyOyUrmH6SKEP5sY =72085-640-9640702-5517614103Microsoft Office Enterprise 200712fFic3JgCreGGRxyF8uMWB4R4Jcg =89388-707-1528066-6591714 ACD7202654E586

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7600.16385

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, retail channel
  Activation ID: e838d943-63ed-4a0b-9fb1-47152908acc9
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00371-00170-177-000006-00-1033-7600.0000-2572012
  Installation ID: 005144242421870610215885787746464524889844109506716151
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: PW487
  License status: Notification
  Reason for the notification: 0xC004F009 (grace period expired).
  Remaining Windows rearm count: 3
  Trust time: 06/01/2013-06:27:26

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0xC004C532
  Beyond: 0 x 0000000000000000
  Event timestamp: 1:4:2013 22:28
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID hash: MAAAAAEAAQABAAIAAAABAAAAAwABAAEAJJTQ1TeXyGP8ULjtak5GkPhQ0OYk7nIZ

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC A_M_I_ OEMAPIC
  FACP A_M_I_ OEMFACP
  HPET A_M_I_ OEMHPET
  MCFG A_M_I_ OEMMCFG
  CO-SUBMISSION A_M_I_ OEMECDT
  LASRYVITRAGE A_M_I_ AMI_OEM
  GSCI A_M_I_ GMCHSCI
  SSDT PmRef CpuPm
  SLIC _ASUS_ Notebook

  the key of product in use is touch uses default windows when no key is entered during installation and cannot be enabled. (he has a 30-day grace period that has expired)

  See response from Andrew on how to install home premium.
  Office status: 103 blocked VLK
  Microsoft Office Visio Professional 2003 - 100 authentic
  
  Microsoft Office Enterprise 2007 - 103 blocked VLK
  
  
  your office is not genuine.

• Did not win 10.  I'm back to Win 7, player will not work.  Don't delete and reinstall.  Help please.

  Tried to win 10 and don't like it.  When back to Win 7, Acrobat Reader will not work.  Make me

  "the Acrobat PDF DC browser plug is missing
  Please reinstall Acrobat Reader DC for this problem"

  Also receive "the older version of Acrobat DC cannot be removed" Contact tech support group

  Try to install it becomes: "the network function you are trying to access is unavailable.

  Try to remove and reinstall doesn't work can not remove the old version and it will not reinstall it

  Please help.  Thank you, Scott Boyd [email protected]

  Try to use this tool: Download Adobe Reader and Acrobat tool - Adobe Labs