Conversion of the white areas of the image transparent

Similar Questions

• How to avoid the transparent background, white in smart object (psb) conversion when the image track high fidelity that we have the ability to ignore track of white up to 16 colors.

  I have an image psd file in photoshop cc 2014 the layer background transparent. I wanted to convert to vector. The best option I've seen was converted first to a smart object in photoshop by layer-> Smart objects-> convert to smart object. then he exported a CPS. Then I opened the file in illustrator and applied image tracking tool, but the background transparent got converted to white but I had the option to skip white up to 16 trace of color. But in the case of Conversion of high fidelity, the option do not know white is not available, what do I do now?

  After using the Trace of the Image and expand the result, just find a part that is filled with white and use Select > same > fill and just delete.

• Gum changing from white to black on the layer mask, leaving the image transparent.

  I used the following method in CS5 to erase parts of a layer/bring these pieces back again if necessary. It works in the same way after that I upgraded to CS6 (not sure if the version difference plays a role or not.)

  What I'm doing here is blend two layers that overlap in one of the other

  1. create the layer to the top layer mask

  2. Select pure white in the color selection window

  3 select the Eraser tool, set the opacity to 30%, 50%, flow 100% hardness

  4. Select hide, erasing the edges of the image where there is overlap to eliminate hard edges and merge the images into another

  5. when I need to highlight an area of the image at the top (one mixed), I pass the color pure black opacity set to 100%, hardness 100% and paint over the areas that I want to "undo" my deletion.

  -Sometimes happens a lot after my initial deletion, so a simple cancellation or who goes back in history is not a possible solution at this moment here.

  -Another note: I have to move over the other layers to align as much as possible, make the story do not brush useful in this case.

  Previously, this would simply restore the image to where it was originally for this place, by removing completely all masking. Now, when I do this procedure, the area that I'm trying to "undo" is however, as if the opacity is set to a level lower than 100%. This poses problems because I want to have the completely opaque image at this stage.

  Some other notes I hope to answer some questions that may arise in advance:

  I haven't settled the opacity of one of my layer masks

  I tried to do the same operation by using the Brush tool (with 100% opacity and hardness, using the opposite colors), with the same result

  As we have earlier I don't know another effective way to achieve the same goal. I'd be happy to do it differently but if necessary.

  All the layers in these documents are dynamic objects

  Thank you!

  I'm sorry it's so confusing. I guess the only reason why I use the Eraser tool is a vestige of when I was actually erase the image - and also I get the brush and Eraser different opacity value to quickly switch between them.

  @Theresa actually, I didn't watch only the mask. Of course the mask was gray in the areas that I was talking about. But that lead me to realize that while the color picker looked purely black and white, I was working with a grayscale image, and it was in fact color and converted to looked at pure Grayscale black and white. I need to set the color of the brush at a certain point, when working in RGB (which I rarely do) and not realised.

  Sorry for posting something with such a trivial response, but you all help me to understand thank you!

• .PS to GIF conversion - truncates the image

  Hi all

  I have an image file in .ps format. When I try to convert it to GIF or JPEG or PDF, I could see that the image is truncated on the right. But when I change the .ps file to be in landscape mode image conversion is correct.

  But I want the image to be converted to Portrait without truncation of the image mode.

  Can any help me to solve this problem in the .ps file.

  Can do something chnaging the .ps file so that I can get a complete picture

  Seen the content of postsript below:

  --------------------

  % ! PS
  %% Version: 3.15
  %% Presents: (atend)
  %% Pages: (atend)
  %% EndComments
  Ident % ' @(#)lp:filter/postscript/postscript/dpost.ps 1.1 ".
  %
  Prologue to version 3.16% for troff files.
  %

  /#copies store 1
  1 def /aspectRatio
  1 def /formsperpage
  / landscapes false def
  Def lineWidth.3
  1 def /magnification
  /Margin 0 def
  /orientation 0 def
  def /Resolution 720
  /xoffset 0 def
  /YOFFSET 0 def

  /roundpage true def
  /useclippath true def
  /pagebbox [0 0 612 792] def

  /R/Times-Roman def
  /I/Times-Italic def
  Def/Times-Bold/b
  Def/Times-BoldItalic /bi
  Def /Helvetica/h
  /Hi/Helvetica-Oblique def
  Manual/Helvetica-Bold def
  /HX/Helvetica-BoldOblique def
  /Convoyeur def /CW
  / Co /convoyeur def
  In/Courier-Oblique def
  /BG/Courier-Bold def
  /CX/Courier-BoldOblique def
  /PA/Palatino-Roman def
  /ER/Palatino Italic def
  /PB/Palatino Bold def
  /PX/Palatino-BoldItalic def
  Def/Helvetica-Narrow/h
  /Hi /Helvetica - Narrow - Oblique def
  Manual/Helvetica-Narrow-Bold def
  /HX/Helvetica-Narrow-BoldOblique def
  / Bookman-Light def /KR
  /Ki/Bookman-LightItalic def
  / Bookman-half def /Ko
  /KX/Bookman-def DemiItalic
  /AR/AvantGarde-Book def
  /AI/AvantGarde-BookOblique def
  Def/AvantGarde-half/AB
  /AX/AvantGarde-DemiOblique def
  /Nr/NewCenturySchlbk-Roman def
  Which/NewCenturySchlbk-Italic def
  /NB/NewCenturySchlbk-Bold def
  /NX/NewCenturySchlbk-BoldItalic def
  Def/ZapfDingbats/ZD
  Def/ZapfChancery-MediumItalic/Zi
  /VR Varitimes #Roman def
  / VI Varitimes #Italic def
  /VB /Varitimes def #Bold
  /VX Varitimes #BoldItalic def
  Def/s/s
  / Def /S1 S1
  Def/Symbol/gr

  /inch {72 mul} bind def
  / min {copy 2 gt {exch} if pop} bind def

  / Setup {}
  counttomark 2 idiv {def} repeat pop

  landscape {/ orientation orientation 90 add def} if
  / 72 resolution div def scaling
  LineWidth setlinewidth
  1 setlinecap

  pagedimensions
  definition of Massilia overview
  Rotate orientation neg
  definition of width 2 neg 2 div height div
  definition of x_offset inches decalage_y
  2 div DUP. neg. margin definition
  scale of magnification dup aspectratio mul
  scale scale scale

  / Symbol/s Sdefs FC
  / CF S1defs S1 times-Roman
  0 0 moveto
  } def

  {/pagedimensions}
  useclippath /gotpagebbox userdict doesn't know not and {}
  /pagebbox [pathbbox newpath clippath] def
  roundpage currentdict known /roundpagebbox and {roundpagebbox} if
  } If
  pagebbox pop aload
  4. 1 roll 4 1 roll 4 exch copy
  landscape {4 2 roll} if
  void /width exch def
  void /height exch def
  Add 2 div /xcenter exch def
  Add 2 div /ycenter exch def
  UserDict real /gotpagebbox put
  } def

  {/PageSetup}
  / page exch def
  currentdict /pagedict known currentdict known page and {}
  Page load pagedict exch get cvx exec
  } If
  } def

  [/decodingdefs
  {repeat it counttomark idiv 2 {y moveto show}}
  {repeat it neg/y exch def counttomark 2 idiv {y moveto show}}
  {repeat it neg moveto {index 2 sub stringwidth pop exch 0 32 4 div - 1 roll widthshow}}
  {repeat it neg moveto {void 0.0 spacewidth 32 4 - 1 roll widthshow}}
  {repeat it counttomark idiv 2 {y moveto show}}
  {setfunnytext neg}
  ] def

  /setdecoding {/ t decodingdefs 3-1 roll get bind def} bind def

  bind/w def {neg moveto show}
  /m {neg dup/y exch def moveto} bind def
  / fact {/ lastpage where {pop lastpage} if} def

  /f {}
  DUP / make exch findfont exch def
  DUP /ptsize exch def scaling of div dup/Size exch scalefont setfont def
  width of stripe ptsize mul scaling 10 setlinewidth div mul
  /spacewidth () stringwidth pop def
  } bind def

  {/changefont}
  /FontHeight exch def
  /fontslant exch def
  [CurrentFont
  1 0
  FontHeight ptsize div fontslant sin fontslant cos div mul
  FontHeight ptsize div
  0 0
  ] makefont setfont
  } bind def

  /SF {f} bind def

  {/ cf}
  DUP length 2 idiv
  /Entries exch def
  /chtab exch def
  /NewFont exch def

  findfont length 1 Add dict dup
  /newdict exch def
  ForAll {1 index /FID {newdict 3 1 roll could not} {pop pop} ifelse}

  newdict entries /Metrics dict set
  newdict /Metrics get
  Start
  chtab pop aload
  1 entries 1 {pop def}
  newdict pop definefont NewFont
  end
  } bind def

  %
  % Some tables used to adjust the points of reference and widths in some of the characters
  % of the printer resident fonts. Try changing if the square roots are too high
  % the lines describing the /radical and /radicalex,
  %
  % /radical [0-75 550 0]
  % /radicalex [-50-75 500 0]
  %

  / [Sdefs
  /bracketlefttp [220 500]
  /bracketleftbt [220 500]
  /bracketrighttp [-70 380]
  /bracketrightbt [-70 380]
  /braceleftbt [220 490]
  /bracketrightex [220-125 500 0]
  / radical [0 0 550 0]
  Newsprint %------(br is too low to compensate for
  statusdict /product get {eq (NeWS server)
  /radicalex [-50 100 500 0]
  /parenleftex [-20 100 0 0]

  } {
  /radicalex [0-50 500 0]
  /parenleftex [-20-170 0 0]
  } ifelse
  / integral [100-50 500 0]
  /Infinity [-10 75 730 0]
  ] def

  / [S1defs
  / underline [0 0 80 500]
  /endash [7 90 650 0]
  ] def
  %% EndProlog
  %% BeginSetup
  brand
  %% FormsPerPage: 2
  /formsperpage 2 def
  Setup
  2 setdecoding
  % EndSetup
  %% Page: 1 of 1
  Save
  brand
  1 pagesetup
  14 I have f
  (Sp) 1220 882 w
  11 S f
  (-) 1378 924 w
  14 I have f
  (A) 1439 882 w
  14 S f
  (\354)1547 799 w)
  (\356)1547 939 w)
  14 I have f
  W (UtranCell) 1616 882
  14 S f
  (\374)2208 799 w)
  (\376)2208 939 w)
  (=) 2277 882 w
  14 R f
  (100) 882 2354 w
  14 S f
  (\351)2587 799 w)
  (\353)2587 939 w)
  14 R f
  (%) 2657 882 w
  14 S f
  (\371)2796 799 w)
  (\373)2796 939 w)
  (\264)2849 882 w)
  14 I have f
  w 1387 1467 (pmTotNoRrcConnectReqCs)
  14 S f
  (\354)2967 1384 w)
  (\356)2967 1524 w)
  14 I have f
  W 3036 1467 (UtranCell)
  14 S f
  (\374)3628 1384 w)
  (\376)3628 1524 w)
  14 I have f
  w (pmTotNoRrcConnectReqCsSucc) 1255 1146
  14 S f
  (\354)3099 1063 w)
  (\356)3099 1203 w)
  14 I have f
  W (UtranCell) 3168 1146
  14 S f
  (\374)3760 1063 w)
  (\376)3760 1203 w)
  14 f S1
  t 1 2616 1 1234 1257 (_ _)
  14 S f
  (\264)3864 1299 w)
  14 I have f
  w 1255 2052 (pmNoNormalNasSignReleaseCs)
  14 S f
  (w \354)3094 1969
  (\356)3094 2109 w)
  14 I have f
  W 3163 2052 (UtranCell)
  14 S f
  (w \374)3755 1969
  (\376)3755 2109 w)
  (+) 3824 2052 w
  14 I have f
  w 3901 2052 (pmNoSystemNasSignReleaseCs)
  14 S f
  (w \354)5700 1969
  (\356)5700 2109 w)
  14 I have f
  W 5769 2052 (UtranCell)
  14 S f
  (w \374)6361 1969
  (\376)6361 2109 w)
  14 I have f
  w (pmNoNormalNasSignReleaseCs) 2558 1731
  14 S f
  (\354)4397 1648 w)
  (\356)4397 1788 w)
  14 I have f
  W (UtranCell) 4466 1731
  14 S f
  (\374)5058 1648 w)
  (\376)5058 1788 w)
  14 f S1
  (_ __________________________________________________________________________)1 5217 1 1234 1842 t
  14 S f
  (\264)6465 1884 w)
  14 I have f
  w (pmNoRabEstablishAttemptSpeech) 1255 2637
  14 S f
  (2554 \354)3191 w)
  (2694 \356)3191 w)
  14 I have f
  W (UtranCell) 3260 2637
  14 S f
  (2554 \374)3852 w)
  (2694 \376)3852 w)
  14 I have f
  w (pmNoRabEstablishSuccessSpeech) 1255 2316
  14 S f
  (\354)3192 2233 w)
  (\356)3192 2373 w)
  14 I have f
  W (UtranCell) 3261 2316
  14 S f
  (\374)3853 2233 w)
  (\376)3853 2373 w)
  14 f S1
  t 1 2709 1 1234 2427 (_ _)
  cleartomark
  showPage
  restoration
  %% EndPage: 1 1
  %% Trailer
  fact
  % Present: Times-italic Times-Roman symbol
  %% Pages: 1

  --------------------------

  Thanks in advance.

  Kind regards

  Jawahar

  Your file PS does not contain the parameters of size or page orientation, so the PostScript interpreter you use

  simply defines the configured default page size.

  As the file defines something as a page covering (the name pagebbox is used), take the fiven values it

  to build a State of page size. For example insert

  < agesize="" [792="" 612]="">> setpagedevice

  right after the comment lines (lines starting with two percent signs). Forcing your PS interpreter

  (condition he speaks at least the language level 2, that I take in silence) to make the formula for a

  Letter size page orientation is landscape.

  If you really want a portrait orientyation, you need to swap two numbers in the

  Statement above and enter the code to scale down the formula.

  Helge

• Save just the image with the background removed

  I have a little graphic, but it has a white background.  I'm new to finally using my PSE 8.  How do I remove the white background and save the remaining image so that the image I only after having removed the white background is that of the element remains in the picture.  I have wan to insert just the image (without the background) in a powerpoint presentation or another tool, but don't want the white background.  I tried a lot of things, but I can't seem to be able to save it as I just have the image.  Can someone help me with detailed instructions on how to do?

  Thank you.

  KLL

  Hello!

  Try please select it magic wand tool.

  

  Now click anywhere in the white area in your image. Your workspace should look like this:

  

  Now press delete and you'll end up with a transparent background.

  

  Now for the rescue. If you save this image in JPEG, you will get a transparent background. Select. Type PNG from the drop-down menu when you save the image.

  That's all. Your finished!

  You can select and remove several areas in this way by using the magic wand tool.

  

• HELP: Deleting background but not the elements of the image that are white.

  

  Hi, I have a feeling there will be a relatively simple solution to this, but as I'm kinda a noob to photoshop, I have been unable to escape myself.

  Basically, I'm eager to have the image attached, printed on a t-shirt. That's why I need to remove the white background and just leave the shirt in the shape of design in the middle. But because there is white on the edges of the design elements when you use the Eraser tool magic, they disappear as well. What is the best way to remove the background while maintaining the design intact?

  If you print on an iron on, you don't need to remove the white. As white do not print. It uses the white of the paper.

  If you are printing or any other process that prints white. It can be as simple as turning off of this color in the section of the print dialog box color separation.

  If all else fails, you can create a background selection and pressing DELETE.

• Since the installation of LR 2015 2.1 when I import from a card, that RAW files are OK by my JPEGs are blackened. The images are there because if I convert to black and white and then back to appear momentarily before color become blackened again

  Since the installation of LR 2015 2.1 when I import from a card, that RAW files are OK by my JPEGs are blackened. The images are there because if I convert to black and white and then back to appear momentarily before color become blackened again? Any ideas for help?

  Hi rsev,.

  For existing photos, select all your images in the grid view, and then click the Reset All button in the quick develop Panel. Then click on the auto tone button to correctly apply this feature.

  To prevent this from happening in the future, choose Lightroom > preferences > Presets (Mac OS) or edit > Preferences > Presets (Windows). Uncheck the apply auto tone adjustments.

  Reference: thumbnails appear black in Lightroom CC 2015.2/6.2

  It will be useful.

  Kind regards

  ~ Mohit

• When I opened the PS from LR to edit an image, the thumbnail appears in the sidebar, but the area of the image is white, PS CC 2014!

  Hello

  I just started a subscription for the Pack of photographers, when I opened the PS from LR to edit an image, the thumbnail appears in the sidebar, but the area of the image is white, I'm sure this is a rookie mistake stupid, but I can't for the life of me see what I did wrong.

  With 256 VRAM, you won't be 3D but with the right drivers, you should be able to use the features of PS that don't require 512VRAM and GPU support.  You should be able to see and edit images.

• pictures are not displayed, just white windows appear instead of pictures.  Information on the images appear.  I use Windows 10

  Good evening.  My lightroom shows white instead of the images.  It presents information about all images and appear as images were shown.  I use windows 10.  Is someone can help me?

  Double post; See my response to your other post: Re: after importing into Lightroom, my pictures appear as white squares - no image. [was: Ned Help!]

• The images are dark conversion of Powerpoint 2007

  Can someone help me with a problem in Acrobat9 Pro.I have about 20 slides with images and free lines.  The file size is about 30 MB. When I try to convert the Powerpoint 2007 document to PDF in Acrobat 9 Pro, the first 16 slides are fine however each slide after that has either the all black image or if more than 1 photo is on the slide, the image on the left is very good and right, or the images are in the black.  All lines drawn by hand and the text display correctly in all the slides.

  If anyone has experienced this problem and know of a resolution can you please help.

  If you are not already on the 9.1, update your software.

  If you're on 9.1 and are still seeing the problem, you can post a sample file that demonstrates the problem?

• Create the image with black and white patterns

  Hello

  With the attached VI I am able to create an image that is completely black (or white or any color according to values in the color palette). See picture1.

  Is it possible to create an image as photo 2 and photo 3 or any other form which consists of black and white patterns? I need an image with black and white areas that a camera can recognize.

  Thanks for any help.

  
  

• Photos appear white and cannot get images to display on the photos

  Original title: I CANNOT GET PICTURES TO DISPLAY ON THUMNAILS, THEY APPEAR as WHITE, WITH a RECORD #, WHY?

  WHEN I NAVIGATE TO UPLOAD PICTURES, MY PICTURES APPEAR IN WHITE, WITH A FILE # BELOW THEM, I CAN'T S EE THE MINIATURE OF THE PHOTOS, I DID CHANGE SOMETHING?

  Hi marvin z..

  1. are you using Windows Photo gallery?

  2. were you able to view a thumbnail preview?

  2. you remember to make changes to the computer before this problem?

  You need enable preview of thumbnails in the navigation pane.

  a. open the pictures folder by clicking the Start button, click photos.

  b. in the Navigation pane, click the folder that contains the images that you want to display.

  All images in this folder are displayed.

  c. click on the arrow next to the view button and then move the slider to change the size of thumbnails.

  Check out the link:

  View and print picture thumbnails

  http://Windows.Microsoft.com/en-us/Windows-Vista/view-and-print-picture-thumbnails

  Also check out the link:

  Change the thumbnail size details and file

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-thumbnail-size-and-file-details

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Selection tool sensitive to color in a limited area of the image

  Hi all

  For my work, I am interested in the measure of the area of pixel of the dark (black) in the sub picture, even the smallest. For less complex images, I used the magic wand and the selection tools to select my black areas and have Photoshop CC 2015 do measures on my selection. The problem with the image below that I have is that there are so many blackheads and they are scattered all over the image. Non-continuous the magic wand option unfortunately does not work for me in this case, because some of the dark spots have the same color as the other dark areas in the picture. So far, I only managed to make a good choice by selecting each point individually, which is a very tedious and somewhat subjective work. What I would like is a sort of quick selection tool with a tolerance as the magic wand option, so I can just fly over areas with small black to select tasks that these. I don't think that this is available in Photoshop, I'm looking for alternatives. That would also work for me, it is to have a way to limit the area that the magic wand tool selects objects of. For example, set a small area (as one of the white ice blocks) and then use the selection option discontinuous of the wand in this ice blocks so it will only select the dark stains on the ice block. If I can do this several times and combine the selections, I should be defined as well. Is it possible to achieve such a thing in Photoshop? In other words, what I would basically is the type of features in the background removal tool, but then make a selection in the foreground based on a color. All other ideas, suggestions, tips and tricks are also welcome! I hope my question is clear and that there is a solution for my problem. I'm very new to photoshop, so please be very clear in your answer, so I can understand every step .

  Edit: I noticed that I posted this maybe in the wrong part of the forum (?), I was a bit in a hurry at work. My apologies. If there is no matter what mod around to place them in the right sub-forum, please do!

  

  

  It works for you?

  To see it in full screen, double click on the image.

  1 use the curves to increase the contrast

  2. place an empty layer below the image and fill it white

  3. return to the top layer, click on the layer to bring up the layer Style

  4. in the section mixture if move the top left right slider until the black dots you want are isolated.

  Also, consider using this technique after the first change the mode to grayscale

• How you reverse the black text on a white background to white on a black image?

  I have a psd that has 3 layers. A white background layer, a layer of text (black) and a black silhouette of myself.

  I want the black text to be visible on the white background. The text is placed above the image of the black silhouette, I want the text of white color.

  Below is a screenshot for reference.

  How can I do this?

  

  If reverse you the color of white text, it will appear on the layer of black, but not on the white layer. Fooled the text layer and change the color of text on the white text fool layer then add a layer mask which is the area of the black layer visible.  Hide which is not on the black.

• Hello. I need to clear this white borders as soon as I enlarged the image files in Photoshop cs5.

  

  Hello. I need to erase this white borderswhen I enlarge the image files in Photoshop cs5.

  When I took some courses in Photoshop, I remembered how fix and do more smoothly...

  Now, I totally forget.

  The solution could control somethings inside preference... I guess...

  Anyway, here, the photo is the horrible headache I'm asking now.

  Please answer my question.

  Thank you very much.

  I think you are referring to the pixel grid that shows extreme enlargement. If that's what you're talking about, go to view > view and uncheck the grid in pixels