Convert 16-bit signed decimal


I need to convert integer to signed decimal value is 16 bytes.

For example a xCC lower byte and the high xFF who in decimal-52.

The string coming from the instrument is xFFCC. What can I use with Labview?

LabVIEW 6.1

Windows XP

In my view, a type of cast string I16 must resolve.

Tags: NI Software

Similar Questions

  • Custom message for: must be a signed decimal number consists of zero, one or more digits


    We have an InputBox mapped the attribute type EO BigDecimal. Whenever the user enters special characters other than digital Gets the error message below.

    < af:inputText id = "it2" value = "#{bindings." Number.inputValue}.

    autoSubmit = columns '10' immediate = "true" = "true".

    Binding = "#{pageFlowScope.ServicesBean.numberInputText}" >

    < / af:inputText >


    Part r2:0:it2: "/" must be a signed decimal number consisting of zero, one or more digits, which can be followed by a comma and the fraction.

    Tried to add the custom resource group error message as shown in below, but no use.

    javax.faces.converter.BigDecimalConverter.DECIMAL=Summary - BigDecimal conversion error
    javax.faces.converter.BigDecimalConverter.DECIMAL_detail=Detail - BigDecimal conversion error

    Is it possible to give the personalized message?

    JDev Studio Edition Version:

    Thank you

    Bhaskar Pola

    Following this article and the problem solved.

    Customize the validation error message in JSF 2.0

    Thank you

    Bhaskar Pola

  • How to convert 32 bit 64 bit os os


    I'm prabhakar computer lab technician... I don't know... I have 64-bit processor, but I use 32 bit windows7 ultimate version 6.2, build 7601 operating system... now I need to change the os 64-bit without formatting... so how do to convert 32 bit 64 bit os...

    Pls answer my qus...

    You will need to do a clean install, there is no place on the way to upgrade Windows 7 32 bit to 64 bit.

    Using the disk of 64-bit Windows 7, install Windows 7 Windows Easy Transfer Utility from the DVD (to find it, simply navigate to x:\support\migwiz, "x:" is the name of your hard drive. (In this case, you will see a collection of files, the important"that you must search for and double-click is 'migsetup'.) run it and create a DAMP (Windows Easy Transfer file), if you have an external hard drive, you can access it later when you perform a clean install of Windows 7 64-bit disk so you can stored there.

    Once you have done this, just do a clean install of Windows 7 64 bit disc. In Windows 7 64 bit disk, start Windows Easy Transfer, follow the wizard screen, tap on which is stored the WET file (external hard drive) and it will restore your personal files and settings. Reinstall the applications needed.

    Boot from the Windows 7 DVD
    Click Install now
    Accept the license agreement
    When the option is displayed to select a type of installation, click (Custom advanced)

    Select the disk partition where you want to install Windows 7 click Next.

    You will receive the following warning:

    The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

    (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

    The installation program will now begin installation. During installation, your computer will be restarted several times.

    Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

    You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  • How can I convert 16-bit files to 8-bit in 5 Lightroom?

    How can I convert 16-bit files to 8-bit in 5 Lightroom?

    You can actually convert a 16-bit image to 8-bit using Lightroom image. You can export a copy and make the copy an 8-bit image. Lightroom does not change the content of the image or makeup. The images that you import into Lightroom are kept in State of origin. But you can export copies in different configurations.

  • Is there a simple way to convert the bits to 16 bit depth?

    It seems there are specific methods PDF/BITMAP to convert 8-bit depth, but I can't find any documentation to make it easily the file as a whole. Is there a way to do this? I want to convert from 32 to 16 bit.

    I have the Image Processor Pro code that looks like this:

      // Bit Depth
      var bd = toNumber(task.@bitDepth) || 0;
      if (bd) {
        var bpc = doc.bitsPerChannel;
        try {
          if (bd == 8) {
            doc.bitsPerChannel = BitsPerChannelType.ONE;
          } else if (bd == 8) {
            doc.bitsPerChannel = BitsPerChannelType.EIGHT;
          } else if (bd == 16) {
            doc.bitsPerChannel = BitsPerChannelType.SIXTEEN;
          } else if (bd == 32) {
            doc.bitsPerChannel = BitsPerChannelType.THIRTYTWO;
        } catch (e) {
          LogFile.logException(e, "Error selecting bit depth " + bd);

    Then, later, I have this code that modifies the document mode so that you can save it as a bmp file:

      if (ImageProcessorOptions.JDI && ext == "bmp") {
        // We need to make adjustments depending the number of
        // bmp save bits selected
        if (saveOpts.depth == BMPDepthType.ONE ||
            saveOpts.depth == BMPDepthType.SIXTEEN ||
            saveOpts.depth == BMPDepthType.TWENTYFOUR ||
            saveOpts.depth == BMPDepthType.THIRTYTWO) {
          saveOpts.rleCompression = false;
        if (saveOpts.depth == BMPDepthType.FOUR ||
            saveOpts.depth == BMPDepthType.EIGHT) {
        if (saveOpts.depth == BMPDepthType.ONE) {
          if (doc.mode != ChangeMode.BITMAP) {
          var cnvtOpts = new BitmapConversionOptions();
          doc.changeMode(ChangeMode.BITMAP, cnvtOpts);

    I don't think I've tested with PDF files.

    I hope this helps.

  • 9 bit signed temperature


    I tried to do the 2 9 bitwise complement to determine the signed bit. I wrote text mode, and it was a job all right; However, I tried to convert LabVIEW. It seems that the digital thermometer does not have a negative temperature. Could someone help me to look through this code? Here is the text-based code.

    If ((tempdata & 256) == 256)

    TempData = (((tempdata & 255) ^ 255) + 1) *-1);

    on the other


    When I used the module 'Playing field' to read a temperature of 16 data bits, but I'm only looking for bit 7-15. However, the "Playing field" module takes care extract data in 9 bits. The data I've read from the 'Playing field' module is returned to digital U32. So I used the returned data determine if the MSB is equal to one.

    When you perform a bitwise operation, you should not forget to check the position again. Your case '1' statement is not valid. It must be "256".

    This should be the result you're looking for.

  • Do not understand why "the node fpga Audio IN Terminal is 16-bit signed integer"?


    I work with myRIO 1900 for my project of ANC.

    Audio IN of the fpga node gives its type terminal data as integer signed 16-bit. So, finally the exit on the nodes of the fpga is fluctuating between two values - 1 and 1. But I want the actual values of the audio data, I did not understand how to address this problem.

    Audio In on the side of RT gives type of terminal of data such as actual values, but I did not understand why the terminal of Audio In FPGAs is 16-bit integer. ??

    Please help me solve this problem.

    Thank you.

    If your analog range of +/-2.5 V.  32768 then--would be the equivalent of-2.5 V.  32767 would be + 2, 5V.

    If you get + /-1 V, then you should see somewhere between + / 13 107 on the analog input of the number I16.

    Basically, take the n ° I16, divide by 32767, multiply by 2.5.  You will have your analog input in volts.

    I don't know why you thing it's just rounding up to the-1 to + 1.  Something must be wrong with your code or configuration.

  • How to convert a negative "signed short int" in a picture of two "tank"?


    I'm having difficulties to convert a signed short int (2 byte) in an array of two characters.

    My current test is like this:

    void ConvertShortIntToByteArray(short int value){   unsigned char byteHi = 0x00; // High Byte of result   unsigned char byteLo =0x00; // Low Byte of result
      unsigned char C1 = 0x00;  unsigned char C2 = 0x00;  unsigned char C3 = 0x00;  unsigned char C4 = 0x00;  short int tempValue = 0;
        C4 = value % 16;  tempValue = value / 16;   C3 = tempValue % 16;  tempValue /= 16;  C2 = tempValue % 16;  tempValue /= 16;  C1 = tempValue % 16;
      byteHi = C1 << 4;   byteHi += C2;
      byteLo = C3 << 4;   byteLo += C4;}

    It works OK for positive values (for example say that 240 = 0 x 00 F0) but negative values don't work here.

    Is there a way to convert signed short int values to an array of two bytes of an easier way?

    I know that common sense would be to go over binary like this:

    Assume value = -240:
    So abs(-240) = 240 = 00 F0 = 0000 0000 1111 0000
    One-Complement:1111 1111 0000 1111
    Add '1' to the One-Complement: 1111 1111 0000 1111+0000 0000 0000 0001  ------------------- 1111 1111 0001 0000
    Result = 1111 1111 0001 0000 = FF 10 = -240

    But is there an easier way that doesn't have to go to binary to achieve?

    Any help is greatly appreciated.

    Thank you and best regards,


    If you want to just let C do its thing:

    void ConvertShortIntToByteArray(short int value)
        unsigned char byteHi = value >> 8; // High Byte of result
        unsigned char byteLo = value; // Low Byte of result

    Or maybe a little more understandable:

    void ConvertShortIntToByteArray(short int value)
        unsigned char byteHi = (value >> 8) & 0xff; // High Byte of result
        unsigned char byteLo = value & 0xff; // Low Byte of result
  • convert from hexadecimal to decimal

    I've recently started working with hexadecimal data. I want to convert a hexadecimal string of 2 bytes to a decimal number, but the VI where I expect to do this does not quite work. You can see that it tied for an example of what I mean. Any suggestions?

    Hi greg,.

    This has been asked so many times before: you need to be sure about the representation of your data.

    More simple would be a cast:

    (digital constant is defined as U16!)

  • Convert 8 bit RGB Bayer Image in Monochrome

    I'm looking for a way to perform an edge detect algorithm on the camera sensor image which was released in 8 bit RGB of Bayer (cannot specify the monochrome output sensor).  The image is read on the gray u8 IMAQ camera, but then the edge detect does not work because of the rasterization of bayer.  After the conversion of bayer in a u32, vi of detection errors color image edge by saying the image type is not supported (logic).  I wonder if there is a function that would allow me to take the image RGB U32 and then convert it back into an image in grayscale which has no pixel with the raw data read problems and will work with the edge detection algorithm.

    If there is a function to convert an image IMAQ from color to grayscale so I could make the edge detect would be great (I didn't see one).  I think it would be a common place because many functions run only with images in grayscale.  If a function does not exist, what is the best way to go on the conversion of the image using LabVIEW.  I'm not an image of expertise so I'm not sure of the best way to go about it.

    Thanks for your help.

    Use IMAQ Convolution with a 3 x 3 table.  The elements of the array are numbers that I entered previously.  The convolution function only like arrays of odd sizes so that the image does not move during the convolution.  You can ignore the idea of 2 x 2 - I think it is cleaner.

    So, to summarize:

    1 acquire U8 Bayer image as grayscale image.

    2. apply the filter convolution 3 x 3 to remove artifacts from Bayer.

    3. use the Sobel filter to find the edges.

    4. use IMAQ quantify for the average or STD dev of intensity.  It is a very good measure of the development.

    Now to confuse you even more: you can speed up the extent of the development if necessary by reducing the resolution of the image.  You must insert a step after 2 (or instead of 2) allowing to extract from every other column and row of the image.  The focus indicator always follows the development very well, and treatment is a bit faster.  I used this trick a few years back, but it is perhaps not necessary on modern computers.


  • convert 32-bit vista to 64-bit reinstall them with

    I have vista Ultimate 32 bit is there a way to convert it without having to reinstall windows 64-bit

    N °

    It is NOT an upgrade path.

    32-bit and 64-bit are two completely different operating systems.

    The only way to change Ultimate 32 bit to 64 bit ultimate is to do a clean install with a FULL Vista Ultimate 64 bit operating system.

    MS advice on the conduct of clean install.

    A tutorial on the use of a clean installation.

    See you soon. Mick Murphy - Microsoft partner

  • Impossible to convert 16-bit to 8-bit

    I'm working on an image that has entered into a NEF (Nikon file) in LR. Saved as a TIF. A lot of work on it. Recorded at the PSD. You want to send in JPG format to the client. Discover it won't convert to 8-bit, even if I ran the conversion command and it sees itself as converted in my historical Panel. It's also show that (RGB/8) next to the file name in the tab at the top of the image file. But when I go to Image > Mode, it is always in 16-bit mode. I must say that the file began as Prophoto RGB mode. I've converted to SRGB, but has not made a difference. I've converted to jpg, but the JPG file is attached to the 16-bit mode.

    I'm puzzled. Have you ever encountered this problem before.

    I wanted to run a blur and still make the changes, but cannot.


    BTW, I use Photoshop CC 2015.0.1, Mac OSX 10.10.3

    Very grateful for the entry. I need to send this image today.

    Jpg may not be 16-bit, it is always 8 bits, so open it in another application to check if it is ok.

    Share, you should try to reset the preferences - go in Edition > Preferences > General.

    Most of the customizations that you have made, like the custom shortcuts, workspaces, etc. will be deleted, so save them before doing so.

  • [JS] Convert String to number (decimal)


    I have a variable with the string value "12,5 ', I have to convert it to a number and kept his reckless.
    How to convert the comma point?

    Thank you.


    Hello ,

    I one variable with the string value " 12 5 , I need to convert to decimal number and kept sound. "
    How to convert le decimal point in ?

    Thank you .

    He is there not a function?

    Non; in fact, the majority of programming languages are hardcoded to the American conventions. But the charge to replace it if necessary is tiny.

    You might have a similar problem, if someone enters a number of thousands separators: '12.500,0' If you replace the comma with a period, "parseFloat ("12.500.00")" Fortunately will read the number, all the way to the next ' invalid' character, which corresponds to the second period. And then he'll "12.5"...

  • How to convert 16-bit to 8-bit without dithering

    I have 16-bit TIFF of RGB that I need to convert to 8-bit Windows bitmaps.

    When I Image > Mode > 8 Bits/channel, introduced Photoshop dither.  He doesn't want.  He's just doing.

    Of course Photoshop erode try to simulate the fine 0-32768 for 16-bit tiff with 0-255, rude to the 8-bit bitmap.

    But the nature of my photos do not dither.  He cannot have pixels that are identical to the neighbouring pixels have become true.

    So I want the simplest kind of 16-bit conversion to 8-bit - pixel by pixel - each 16-bit level is replaced with the level of 8 nearest bits.

    If there is no way to disable the dithering in Image > Mode > 8 Bits / layer is there some other way for the bitmaps in 8-bit necessary?

    Thank you


    Create a new 8-bit doc and copy the original 16-bit file to the new RFSO bit using the copy (or merged copy) and paste.

    Save for web strips almost anything but the image of the file data. Probably better to copy and paste If you need dithering for color space conversion, or do as suggested and change the color settings.

    Save for web (and devices) is in the file menu.

  • Convert or map Typedonnees decimal Transact-SQL for Oracle Number data type?

    MSSQL 2005
    Oracle 10.2 g

    In a MSSQL table, I have a column with the data type set on (decimal (1.0), null) with the values of line-1. (695 lines in total)

    In the Oracle table, the proposed mapped column is a number data type. When I import data, I received 695 errors with the message "invalid value for the field. How to properly convert or map Decimal (MSSQL) Transact-SQL for Oracle Number data type for a negative value?

    Thank you.

    How do you load data into Oracle? What tool or programming language you are using? Can you post something cause what you stated in your post should work, but there may be some ODBC, or other type of conversion factors to be taken into account.

     > create table t1 (field1  number(1,0));
    Table created.
     > insert into t1 values (-1);
    1 row created.
    UT1 > select * from t1;

    HTH - Mark D Powell.

Maybe you are looking for

  • Merger of Split drive

    Hi, one of my clients wanted an SSD in its iMac 27 "and carries the iMac to Apple repair center. They swapped the drive plate rotation with the SSD, and when he came to collect his iMac they told him that they also installed a new OS x disk. He thoug

  • My MacBook suddenly started working slow

    Hello! I got my MacBook Pro since 2012 and it suddenly started running slow. I rebooted several times. Also, I deleted some files, but it does not work perfectly. I noticed that when I start watching the video in my MacBook, it will stop so many time

  • Fancy an mSATA Sleekbook drive failure?

    I have a HP Envy Touchsmart Ultrabook 4 Sleekbook. He had a problem where it would not even go to the splash screen. I would press the function keys and the lower left corner, I'd get "System Info... "'System Recovery... '. ' or whatever the function



  • Cannot install the upgrade to Windows XP Pro SP1 of Windows XP Edition family with Service Pack 3.

    Cannot install upgrade The home computer has Windows XP Home (pre-installed) Edition with Service Pack 3.  Buy XP Pro SP1 update.  Can not install the upgrade, get the message: Setup cannot continue because the version of Windows on your computer is