convert elements using the DAQCard-6024E card to USB-6221using LabVIEW 2009

Similar Questions

• HPE h9-1001de: HPE h9-1001de - broken graphics card can I use the integrated graphics card Intel?

  I bought this PC four years ago (just the version, not CS as in the link):

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=c03106002

  The integrated graphics went broken today. Research on the spec Web site I noticed that the Intel's integrated graphics. I won't buy another video card, if there is a graphics processor integrated into the processor.

  Indeed, there are two additional DVI ports; However, they are sealed with a sign "DO NOT REMOVE", and each port is sealed with two screws with a strange format (star with six faces?).

  Why these DVI ports are sealed? Why with this format live strange? I hope that's not for licensing reasons, and that I'm still able to use them as DVI ports...

  Thank you.

  Hello:

  I don't think it is sealed for any other reason than from your PC with a video of the add-on card, they would not people plugging in these ports DVI cables and by calling HP support complaining that the video does not work (because an add on card disables the integrated graphics card).

  Remove your discrete PCIe x 16 graphics card, so the built-in graphics card is enabled, put your hand on the good size torx screwdriver and remove the cover, so you can use the integrated graphics card adapter.

• standalone application for the acquisition of data using the NI DAQ card

  I did a stand-alone application in labview GUI for data acquisition and processing of the signal. If I have to run this application in any other computer which should be all installed software other than the labview runtime engine... CD DEVICE DRIVERS OR alone must be installed or do I have to install any other software of data acquisition using the data acquisition card OR?

  Thanks and greetings

  You need only the racing of the engine, the device for the device drivers, maybe need pilots VISA if you make serial or something of this nature, you may need the channels or tasks created in the measures OR and automation if you created the it.

  There may be other things you'll need depending on what you include in your code and what tool kits that you have installed.

• Call of duty Black Ops Zombies 2, using the wrong graphics card

  Hello, I recently contacted Activision about the mode of call of duty Black Ops Zombies 2 very agitated and jumpy, like what you would get if you've played online with someone across the world, like really bad lag offline server, now I can play the campaign and multiplayer on the highest graphics settings and have no problem at all just the Zombies mode, even in offline mode. People at Activision back to me and said it could be because the Zombies is using the integrated graphics card Intel CPU and not discrete AMD card, and they said I should contact HP to see if if there is a way to activate manually in Control Panel. I'll link the Forum on Activision's post to read what said the people.
  https://support.Activision.com/Atvi_my_support_case_details?ID=500U0000005nbrlIAA&RMA=0

  If it does not work the link, then let me know and I will copy them here for you to see, if you think you need.

  Hi Goochster,

  I tried the link you provided, but it is inaccessible, unless we have a forum of Activision account.

  Normally, all you have to do is right click on an empty spot on the desktop and select Configure switchable graphics.

  

  Select it gpu performance and click apply. That should leave the AMD GPU default graphics package.

  Put a check mark in the box for the "saving GPU on battery switch' your laptop will not consume so much battery capacity.

• My HP Envy for television using the old Tuner card

  I currently have a HP Envy 17 with no PCMCIA card slot. My old computer is a laptop HP DV9260 (Vista) that came with a PCMCIA TV tuner card (I never used). I still have the card and all other components.

  I want to use my desire to pick up digital TV shows, but I can't use the previous tuner card because the desire doesn't have a card slot. Which is the best option... (1) find an adapter to use the prior TV tuner to the PC (via USB) card or 2) buy a new tuner system? I checked with HP, not a lot of help support. Thank you!!

  Nijuuf wrote:

  I currently have a HP Envy 17 with no PCMCIA card slot. My old computer is a laptop HP DV9260 (Vista) that came with a PCMCIA TV tuner card (I never used). I still have the card and all other components.

  I want to use my desire to pick up digital TV shows, but I can't use the previous tuner card because the desire doesn't have a card slot. Which is the best option... (1) find an adapter to use the prior TV tuner to the PC (via USB) card or 2) buy a new tuner system? I checked with HP, not a lot of help support. Thank you!!

  Hello

  You need something like this:

  http://sewelldirect.com/U142-USB-to-CardBus-adapter-for-3G-high-speed-modem-PCMCIA-cards.asp

  However, I would have preferred a new USB cards tv or boxes. Take a look at the price...

  http://www.amazon.com/s?ie=UTF8&keywords=notebook%20PCMCIA%20usb3.0%20card&page=1&rh=i%3Aaps%2Ck%3Anotebook%20PCMCIA%20usb3.0%20card#/ref=nb_sb_ss_i_0_15?url=search-alias%3Daps&field-keywords=external+usb+tv+tuner&sprefix=external+usb+tv%2Caps%2C234&rh=i%3Aaps%2Ck%3Aexternal+usb+tv+tuner

• Use the DAQCard 1200 with LabVIEW 2009 map

  Hi, I have a DAQCard 1200 and LabVIEW 2009 card. Can I use this device with this version of Labview? Is there anyway to make it work? Thank you.

  Hello ACTS,

  There is a difference betweenmx and traditionalDAQ DAQ!

  Installation of NI - DAQ6.9.3 is ok as outlined in this KB entry link above.

  But: you will find all of the DAQmx like this "DAQ Assistant" features! (Btw. why you insist on the use of ExpressVIs?)

  You must use the TraditionalDAQ functions instead. (There should be a few examples too...)

  Yes, DAQmx does not support your DAQCard1200. But TraditionalDAQ6.9.3 will do...

• How to remove iMessage, if I can't use the old SIM card?

  I've traveled abroad and used a temporary SIM card with my iPhone 6.

  Now I'back home, inserted my regular SIM card but iMessage continues to try to register with the temporary number, I used abroad.

  Although I always temporary SIM card, it is useless in my country and that's why I can't receive the confirmation code to unregister the temporary application number.

  How can I reset iMessage or know that I need to register with my local number and not the temporary?

  Tried everything and read a number of forums, but nothing seems to work.

  See this--> https://selfsolve.apple.com/deregister-imessage

• Can I use the operator SIM card on my T530 wireless?

  I have a card slot SIM which is supposed to be for WWAN, but I do not have a WWAN modem. Can I use the SIM location in this State for WLAN (HSPA) and others (with Intel Centrino?), or do I have to buy a modem USB to a wireless carrier?

  No, you can't. The slot for SIM card only works when a WWAN compatible card.

• The DAQCard-6533 card connections

  I have a DAQCard-6533 card with the following cables and connector box. Is this a valid configuration? I have trouble reading the entries.

  1835698 - 01.1 meters cable, adapter card to:

  183432 B-02 2-meter cable

  CB-68LP connector box

  It seems to be similar to a cable with part number, PSHR68 - 68 M.

  I think I got through this. Pin 1 of the connector for the PCCard was not indicated. Unfortunately, it is part of the map both ways and I knocked him over (upside down). I found this by injecting + 5v signal and looking at the answer through the utility of measurement and automation.

  Thanks, for your help!

  Go Bucks!

• HP Pro 3130 microtour: use the integrated graphics card Intel H57 Council

  Good afternoon.
  Motherboard HP Pro 3130 Microtour here MS-7613.
  What you need to install the CPU, which it was possible to use the integrated graphics Intel H57 Board adapter?
  Poised the Lynnfield Quad Core Intel Core i7-870, 3300 MHz. It does not work with an integrated video card.
  External graphics in the PCIe slot only.

  Hello:

  Please refer to page 3 of the quickspecs at the link below... specifically the part where it says: NOTE: HP Pro 3130 with Intel Core i5 750 processor or any what Intel i7 processor has no integrated graphics card.

  http://WWW8.HP.com/h20195/v2/GetPDF.aspx/c04290878.PDF

  You will need to add a graphics card into the PCIe x 16 slot.

• Aspire V3 - 571 G BSOD when using the dedicated graphics card

  Hey,.

  I just got my new laptop, but as the title suggests, whenever I try to run a program that uses the graphics card, it stutters a bit, before finally being BSOD'ing or saying "NVIDIA Windows Kernel Mode Driver display driver, Version 307.17 not responding and has successfully recovered."

  This happens even with own NVIDIA Control Panel program, where it gives you this small window of the NVIDIA logo rotating. I tried with Minecraft, just to make sure it wasn't this one program.

  Everyone has experienced this before or have any advice? Thank you very much in advance!

  PS: I would have presented a ticket of support on this issue, but it asks me to enter the date of purchase, but it keeps screaming at me that I need to enter "valid a date", even if I use the datePicker bit next to the entry field.

  I ended up sending the laptop in for repair, and apparently it was a faulty motherboard, so they changed it. Everything worked smoothly after that.

• Skyrim - using the integrated graphics card

  My Dell has a built-in Intel and a dedicated Radeon card. For the high range, such as Skyrim 3D games, I obviously prefer to use AMD, but the game is auto detection of the onboard. I've tried everything. I tried all ini files and that you can find no reference to intel or AMD, display or whatever it is. I have manually disabled the card intel in Device Manager, but then the game comes with intel base made graphic, I went into the bios to try and the value of the main graphics card to AMD, but I can't find it anywhere in the bios (which has very very few options) I also used the AMD Control Panel to set the game to run using maximum performance , but continues to use the map intel. Any advice would be appreciated, thanks Matthew

  You cannot set the AMD GPU as primary - it is not connected directly to the screen.  Only the GPU from Intel is directly connected - the AMD GPU is NOT a dedicated GPU.  It's a video coprocessor - all passes of video data by the Intel GPU on its way to the screen, even if it has been processed by the AMD GPU.

  If you selected the AMD GPU for the game by using the catalyst control center, that's all that is needed. No matter where you look under Windows, you will always see the Intel GPU as active.  It is a system controlled by software - controlled material no.

• Cannot use the Microsoft gift card.

  It gave me a gift card from Microsoft when buying my Surface at Staples Barrie (Canada), and when I logged on my account to apply the $25 gift card was said that it was invalid in my country.

  Attempts to contact Microsoft surface by CAT earlier and chat window was impossible to use, because I couldn't expand window Tech... SO could not see when they met or what they were saying.  Finally, tried to send it to my mail, and I saw that they responded with a Question, presumably while I had spent.
  Talk about frustrating...
  Staples was unnecessary, saying they were talking Tech was difficult to contact by phone...
  The gift card has an expiration...
  Someone else to Canada encounter the same problem, and if yes, how did you get your %25 card gift applied to your account.

  Hello

  Make sure that the date and time are correct on the computer.

  (a) check the Date/time setting by selecting the tile office and then left click on the time in the corner.

  (b) click on change date and time. And then check that the time zone is correct and the time of the internet tab has the ability to synchronize with the time server Internet.

  For more information, see this link:

  How can I redeem a gift certificate or promotional code?

  http://Windows.Microsoft.com/en-GB/Windows-8/redeem-gift-card

  I would say to contact the Microsoft Store support for more information: http://www.microsoftstore.com/store/msusa/en_US/DisplayHelpContactUsPage/ThemeID.29553000/

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• Is it possible to access AMX element using the AMS item ID and then update the value of the AMX?

  I created a prototype - where I need to create a static Page AMX element. I have a bean that will have a method of UPDATING: the user interaction with the element AMX fires this UPDATE method, and the method will determine the value of another node AMX. The example is as follows

  <? XML version = "1.0" encoding = "UTF-8"? >

  "< amx:view xmlns: xsi ="http://www.w3.org/2001/XMLSchema-instance"xmlns:amx ="http://xmlns.oracle.com/adf/mf/amx"

  xmlns:dvtm ="http://xmlns.oracle.com/adf/mf/amx/dvt" >. "

  < amx:panelPage id = "pp1" >

  < amx:facet name = "header" >

  < amx:outputText value = "Header-XXX" id = "ot1" / >

  < / amx:facet >

  "< amx:selectOneChoice label = '1' id = 'soc1" value = ""valueChangeListener ="#{SolverLogic.Update1}" > "

  "< amx:selectItem label =" "id ="si667803"value ="-1"/ >"

  < amx:selectItem label = 'O1' id = 'si667804' value="667800.667803.667804"/ >

  < amx:selectItem label = "O2" id = "si667805" value="667800.667803.667805"/ >

  < amx:selectItem label = "O3" id = "si667806" value="667800.667803.667806"/ >

  < / amx:selectOneChoice >

  "< amx:selectOneChoice label ="2"id ="soc753865"value =" ">."

  "< amx:selectItem label =" "id ="si2"value ="-1"/ >"

  < amx:selectItem label = "Ø21" id = "si753866" value="667800.753865.753866"/ >

  < amx:selectItem label = "Ø22" id = "si753867" value="667800.753865.753867"/ >

  < amx:selectItem label = "O23" id = "si753868" value="667800.753865.753868"/ >

  < / amx:selectOneChoice >

  < / amx:panelPage >

  < / amx:view >

  When the user selects 'O1' - 'SolverLogic.Update1' bean - will calculate 'Ø21' must be selected. Is there a way to access the node AMX 'amx:selectOneChoice label is '2' ' - using the ID - id = "soc753865" sound, and then set the value as "value = 'Ø21' '"

  My requirement is that I don't need a DataController object, I have a binary file that contains the business logic, what I need is to create a static page and then use business logic to determine the result of user interaction and then update the user interface accordingly.

  Thank you

  Shailendra

  There is no label but value.

  You must have the below for the value of selectonechoice:

• I AM trying to DOWNLOAD ADOBE PHOTOSHOP ELEMENTS using the redemption code, but it won't let me?

  I bought Photoshop Elements and followed all the instructions for download through the www.adobe.com/go/getserial because I don't have a CD player. I got the serial number, but it still won't let me download the software?

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".