convert pilot instr written in labview 5.1 to Labview 8.5

Similar Questions

• I need to convert programs written in Labview 8.5 in Labview 2012 when I want to run these programs in 2012 of Labview VI?

  I have VI moreover written in Labview 8.5. These programs can work well in labview 8.5.  Should I convert these programs VI Labview 2012 when I want to run these programs in 2012 of Labview? Thank you.

  LabVIEW 2012 can open the screw of from 6.0.  But if you save them in 2012, you need to perform a "save for precedent" to get back them to 8.5.

  This resource may be useful:http://www.ni.com/white-paper/8387/en

• Version of VI is still too early to convert the last version of LabView

  I get this error when deploying a simple loop VI I try to troubleshoot the symptom of not being able to connect to the remote control.

  I have LabView 2014 SP1 version 14.0.1 installed and that's what I used to build the VI (see attachment).  The version of the software on the cDAQ 9139 I work with ranges from 14.0.1 for real-time 14.2.0 for DAQmx 14.5.0 or Web Application Server.  (See attachment).

  How can we still too early to convert to the current version, if the software LabView 2014 is installed on the cDAQ has VI created in LabView 2014?

  Again, the symptom that I see is "Server does not support remote façade panels" when you try to access the façade of a web browser.   I confirmed by working with our it Department IS not blocking all communication.  The Blue Coat standard software is not installed on the computer, I'm trying to access the Panel of (I also tried to connect to the remote control of my computer at home that has no software IS on it with the same results).  Anything related to the NC was added as exceptions to the firewall.  I have tried a large number of configurations of ports and worked through the troubleshooting list, you can find on NI.com when you search for this error.  There must be something tiny miss me.

  In addition, nobody knows what the two links in the HTML file that is generated when you use the Web publishing tool are supposed to do?  One is a FTP link and the other is a link to the plugins page.

  I took two step forward on this issue.  First of all, I reformatted the hard drive of the cDAQ and reinstalled only most of the software as before, I had been all install available on the host the cDAQ.  This seems to have fixed the error 'version of VI is too early to convert the last version of LabView.  Secondly, I discovered an error in my understanding of the port settings.

  In the configuration of the cDAQ web screen, the web application server is listed as port 8080, by default I believe.

  In the properties cDAQ in the Project Explorer window, the web server has been changed on port 80 to eliminate the need to put in the port number to access the remote control.

  I'm sure it's an assumption on my part, and oblivion, but I thought that those who have the same parameter with just the ability to be set from two different places.

  When I try to access the remote control via the web browser uses the web application server port listed in the views of web configuration, I received the error "server does not support the remote panels.  When I try to access the remote control via the web browser using the port listed in the properties of the CDAQ project for remote control Server Explorer, I could see and interact with the remote control.

  This probably also makes perfect sense now that I understand they serve two different goals, but if you define two ports at the same address, you will get the error "server does not support the remote panels.  Interesting that it always provides the correct html page.

  I am sure it was my problem throughout linked to the issue of the remote control.  I was probably just lucky when I put the Panel remote port server during the initial setup and my luck ran out when I upgraded to LabView 2014.

  Hope this helps people who may have the same assumptions I made.

• Convert specific signals from NI Labview vi

  Hello

  I am currently using Labview SignalExpress. I need to work on a Labview VI to work more professionally. However I'm not familiar with Labview VI.

  I need to convert my program 8 VI Labview SignalExpress.  I tried several times but could not managed it. Could you please help me on this?

  Thank you in advance...

  ERS

  Hi John,.

  I had a look for her, but honestly I'm quite dummy do sth for the first time. could you please just show me how to adjust the frequency of the analog signal of my converted VI? And also exchange out digital up and down?

  Thank you

  Please help me

• Convert the old file of labview

  Hello

  I have an old labview file created with version 5.1. Currently, I'm using Labview 10.0, anyone could convert the file to a newer version?

  Thank you very much!!

  That's it, in 2010

• How to convert files vi 9.0 Labview 7.1 vi?

  Hi, I have a set of LabView 9.0 .vi files that I need to convert the 7.1 .vi, but the latest version of LabView 9.0 only allows me to save in version 8.0. So, my questions are:

  (1) can a user with LabView 7.1 open 8.0 file?

  (2) if not, is there another way to convert 9.0 files directly to 7.1 files?

  Thank you very much!

  It requires two steps.

  You must open the VI in 2009 of LV and make a backup for the previous version back at 8.0 LV

  Open in BT 8.0, then make a backup for previous back to LV 7.1.

  If you don't have a LV 8.0, then you can post the files to downconvert thread and ask it what they converted into LV 7.1

• Can someone please convert the driver Tektronix AFG3022 LabVIEW 7.0

  Hey, I need a driver for LabView 7.0 AFG3200. The driver page has only drivers for 7.1 or higher.

  Try these.

• VI, written in Labview 8.2 does not not in labview 8.5

  I improved labview on my PC. Old version was of 8.2 and now I 8.5.1. But the vi and the program that has worked well in labview 8.2, works no more. I noticed that some of the sub vi are not recognized in labview 8.5. A specimen VI is attached. Pls suggest what to do.

  Thanks in advance

  RSD

  errors such as the following, are reported;

  Poly VI 'VI Timing.vi': sub Daqmx is not executable.

  similar errors are reported to create virtual channels, mx writing Daq and the Daq mx start task.

  You just need to reinstall the DAQmx driver. You can find the latest version of the driver from the drivers and updates.

• conversion of LabVIEW 8.5 in 2012

  Hello

  I'm trying to convert my application written in LabVIEW 8.5 with NOR-traditional Daq OR DAQmx LabVIEW 2012.

  You can find the code as an attachment

  Thank you

  Are you aware of that very specific baord is available for applications for upgrading / downgrading.

  http://forums.NI.com/T5/version-conversion/BD-p/VersionConversion

  In addition, a VI that is created in LabVIEW 8.5 version can be opened in the 2012 version & later recompile (upgrade) it.

  Edition: Find VI improved with DAQmx functions in the attachment.

• Open the reference vi from Labview Labview 2014 6 conversion

  Is it possible that someone can help me to convert this VI written in Labview 6.1 so that I can work in EXE in 2014 of Labview.

  I have to open this vi of 6.1 until 2014, but it does not run. The reference open vi that those do not work in program exe. Anyone know how I can replace this function...

  Thank you!

  Error 7 is file not found.  So your dynamically called VI isn't in your executable.

  In to build for your project executable specification, there is a "Source files" section.  On options for the screw is always 'include '.

• How to convert the file with VI for LabView .lib to CVI?

  Hello

  I have the .lib file for my lock in the amplifier. The lib file is written for labView and already contains a visual interface (like ActiveX). The point is that I need this file for programming in CVI (8.5). How can I convert a LabView ICB .lib?

  Thank you.

  Denis.

  You said that you had a .lib file and in fact you have an llb file. There is a huge difference between an "i" (eye) and a 'l' (ell).

  There is a LabVIEW Instrument Driver Export Wizard but it's only for new pilots of project lifestyle and you need LabVIEW. There is no other way to convert a LabVIEW driver to a driver of the CVI. If the LabVIEW driver uses methods and properties of the ActiveX, you will need to write the same thing in CVI.

• convert labview 5.1 to 2014

  Could someone help me convert this 5.1.1 labview vi to the 2014 version?

  At the top of the page is a link to the Council of the Version Conversion. Please post here.

  http://forums.NI.com/T5/version-conversion/BD-p/VersionConversion

• Sypris Teslameter Driver_too early to convert version of labview 8.5

  I'm new to the labview program (8.5) and try to use it to run my setup. I have connected the Teslameter/Gaussmeter (FW Bell Sypris 6010) to the computer via the serial port and cable RS-232 and used the driver (of the company) for this type of devices to enable labview communicate with this device, but there is always an error when I try to access the device through labview. This error says:

  "Version of VI is still too early to convert the last version of LabView.

  I'd appreciate any help in getting this resolved.

  Thank you very much

  Alain

  Please report to the Upconvert thread you see at the top of the page Board of LabVIEW.

• Convert Labview 7.1 9.0 vi vi

  Hello

  Can someone convert the file from the labview version 9.0 for labview 7.1.

  Attached file as an attachment.

  Thanks in advance

  Vlaminck

  Thank you a show for guys to help

• Convert labview 5 llb to 8.6

  Could someone please convert this library (apparently from Labview 5) in a format compatible with Labview 8.6?  In addition, it is possible to download the version of labview 8.2 (so I can make these conversions myself without worrying about someone) that would be great too.  I tried to access some links but get'm denied access.  Messages before reading, is not uncommon.

  Thanks much for any help you can provide!

  Here you go...