convert several files version how?

Hi all, I have a folder with subfolders labviews in the 2009 version of LV.  Is there a quick way to convert all of them to an older verson?  Or do I have to open and save as an older version, one by one?  Thank you!

Yik

jyang72211 wrote:

I understand what you're suggestion, but I don't understand how this method allows to convert all the screws in an older version?  If I want to have some new and old version, should I make a copy of all screws before I use this method?

Yik

NO! what you do is-

  • Create a new project

  • Add existing project folder

  • Save > to the previous version

  • Select a new folder when prompted

LabVIEW will be "copy" of the vi in the folder to the new location and recompile all the files in the folder of the previous version of LabVIEW

Tags: NI Software

Similar Questions

  • Is there a way convert several files in sequence at a time?

    I am looking for a way to convert files in sequence from 2012 to 2010 in decline. You are looking to do more than one at a time and I'd like to be able to convert a whole folder down.

    This can be accomplished using the TestStand API by using the following method to check for the previous function:

    RunState.SequenceFile.AsPropertyObjectFile.WriteFile (WriteFileFormat_TestStand45)

    You need to just get a sequence of file references table, which is probably easier to do thanks to a code module (for example the recursive file list VI in LabVIEW).  Don't forget to call Engine.ReleaseSequenceFileEx on the references after the execution of the backsave.

  • How to convert pdf files to word doc files

    I've converted several files to PDF by accident.  I do not know how to convert them to a readable word document that has been written since the word processor

    Hello

    You must use third-party converter to convert PDFs into Word documents. I suggest you to use your favorite search engine to check the converters.

    Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    It will be useful.

  • Convert 1 file multiple at a time, possible?

    Dear Adobe community and users,

    I had a problem where it seems that I could not find the relevant information.

    • There are many available software > convert several files = both

    But on the contrary to here my request > How to export the 1 file > in several formats at the same time?

    For example:

    I have my template .psd is > and I wish export or save under = .pdf + .psd (with or without layers) .jpg + .tiff = both / 1-click.

    I work every day on photoshop and after the backup my .psd project > I need manually save my file > in a different format.

    The goods most valuable in life is the time! Do you think this kind of software or plug-in is available for mac?

    Any help would be greatly appreciated :-)

    Thank you

    F.

    He recorded under Photoshop PDF with layers. Quick solution is to check: Action to run and to download the action I recorded Image.zip flatten - Google Drive , it is action with only one stage to flatten the image. See screenshot below: click on set For PDF (first down after :) and the action should be Flatten (second drop after Action :). From the link below, you will download Flatten action which is within the defined action PDF. Quick tutorial is to decompress the package above, then go to file > Open > stand For PDF.atn and double-click on it which will load action that you can check in the window > Actions Panel.

  • How to change the extensions on several files with Windows 7?

    * Original title: Extentions

    How to change the extensions on several files with Windows 7?

    You hear no doubt, is that your movie software will only recognize certain types of image file formats.  If this is the case, you will need to reformat format files to any format PNG is recognizable by the software.

    Rather than we guess, please identify your «film» software

    Download and install IrfanView, which is a free utility for images.  http://www.IrfanView.com/

    IrfanView has the ability to read a great many formats of image files.  It can also convert image files formats.  And even better - for you - it can do all these things on a batch of files.

    As test, after I installed IrfanView, open one of your PNG files.  Now click on file > save as, and select the 'Save as Type' to be little matter the file type of your movie software will accept.  Save the file.  Make sure your movie software can accept the new file.

    Once you are convinced that you can modify files that you have in a format that you can use, use IrfanView

    File > Batch Conversion/Rename command.  If necessary, see IrfanView help on this topic.

  • How can I get a refund?  I'm unable to convert pdf files.

    I would like to know how I can get a refund.  I bought earlier today adobe reader software to convert a pdf file, I tried several times to convert the file, but I get the same message to try again.

    Hi Hollywood2020 ,

    I would like to inform that Adobe Reader is a free application, could have bought service Adobe export in PDF format to convert PDF files. Refund, please refer to this article:- return, cancel or Exchange an Adobe order

    Kind regards

    Christian

  • I'm trying to convert a file to PDF and continue to get a message indicating that an error has occurred all by signing. How can this be repaired?

    How can I fix this sign in error?

    Looks like you are using an older version of Adobe Reader. You can try upgrading your player to the latest version (CD) or you can convert your file to https://cloud.acrobat.com/createpdf.

  • How to convert PDF files to Word, Excel and other formats, and how I got it.

    How to convert PDF files to Word, Excel and other formats, and how I got it.

    Hi convert PDFs to word,

    You can use the ExportPDF online service to convert PDF files in several formats, including Word and Excel. Once you have converted the files, they will be stored in your online account, and you can download them here.

    Best,

    Sara

  • Using the stand-alone converter 5 with entry as local windows 7 in vmware fusion 4 output, the output is a folder with many files. How can I get this folder into a single file with the extension windows7.vmwarevm?

    I use standalone converter where I am converting my local windows 7 in vmware fusion 4 at the exit. When I made the migration wizard previously, I had an output of a windows7.vmwarevm file. However, when I made the converter, I had a folder called windows7. In this case, I had several files.

    Is there a way for me to convert all these files into one file, that is to say: windows7.vmwarevm? do I need to use the converter or other vmware tools?

    Welcome to the community,

    Please take a look at Re: how to convert a package/package of my folder on drive hard/vmware fusion? to see if that helps. This is a pretty old post, but I think that it is still valid.

    André

  • Convert several Word Documents into several PDF files

    Hi, I'm looking for a way to convert several PDF files in word documents. I am running Adobe Acrobat 3D Version 8.1.2. It seems as if will Advanced > Document processing > batch processing and then using the Print sequence All will do, but when I selected word documents I want to turn into PDF files, after I click on "Execute sequence" I get a message in the progress window saying «Start the application in which the file was created...» "then Acrobat stops and nothing happens. Does anyone have any ideas as to why this is happening?

    Thank you!

    Hi "jhaystead"

    Apologies to make an erroneous suggestion. "Batch conversion" is a feature of Acrobat 9 or higher.

    I would suggest that you use the "Open All" sequence > double-click the Edit > "2. ' Run the command: "choose"Selected folder"and BROWSE to your folder of entry. The same for the '3. Select output location", you can choose"Same folder as Original (s)", click OK, and then click 'run the sequence '.

    That invoke the PDFMaker to convert Word to PDF documents and save the PDF (s) in the documents mentioned, instead of printing output and inviting them to record the result every time as Adobe PDF Printer.

    Plus, could you please check if menu/toolbar Adobe PDF options are there in Word and works well?

    When you said,

    ' Is the only way I can get a PDF file produced to manually open each word document, and then save it in the format PDF.» I did have luck with the multiple PDF creation. " Print you documents Word, Adobe PDF or printer using the PDFMaker options?

    Thank you!

  • How to convert AVI files for first CS4 (Mac) with VLC - Please Help!

    Hi thanks for the reading-post it here for the first time.

    I'm another grass sorry, trying to convert AVI files, so I can import them into first CS4 on a Macbook Pro laptop. I am using VLC on the macbook to perform the conversion. I don't want to use free converters such as iSquint (tried and many others) b/c they cause a significant loss of video quality. But I'm trying to do it for free! (I'm broke).

    Been read tons here and on other forums to get advice first, but in my view, none is really specific to my situation.

    I'm fine (slight quality loss) video but NO Audio. I want the audio too!

    AVI files seized on an old NV3 camera SD card.

    VLC said the Codecs for these files I got off the SD card are as follows:
    0 workflow:
    Type - video
    Codec - MPEG - 4 (XVID) video
    Resolution - 640 x 480
    Rate - 30

    Stream 1:
    Type - Audio
    Codec-MS ADPCM (audio ms)
    Channels: Mono
    Sampling frequency - 22050 Hz
    Bits per sample - 16

    I tried several different configurations with VLC conversion according to the documentation of "Supported file Formats for import in first CS4": http://help.Adobe.com/en_US/PremierePro/4.0/WSf52ca809ac8f6c7135876f961243120b72d-8000.htm l

    For example I tried to convert the same file as follows:

    Wrapper MPEG 1 - converted with MPEG-1 VIDEO 1024 bits/Audio MP3 192-bit
    Wrapper MPEG 1 - converted with MPEG-1 VIDEO 1024 bits/Audio MP3 128-bit
    Wrapper MPEG 1 - converted with MPEG-1 VIDEO 1024 bits/MPEG Audio 128-bit
    Wrapper MPEG 1 - converted with MPEG-2 VID 1024 bits/Audio MP3 128-bit
    Wrapper MPEG 1 - converted with MPEG - 1 1024 bits/MPEG Audio 16 bit VID
    Wrapper MPEG 1 - converted with MPEG - 1 1024 bits/MP3 Audio 16 bit VID

    When converting to MP4 (MPEG-4) I get a general error while importing first so no dice on that, and I tried a lot of other configurations/combinations, but not all. 

    I check each result with VLC before import into the Prime Minister and they play both audio & video fine with VLC.

    My question is the following: what settings can I select in VLC for audio first? Or if there is a specific codec I need to download and install a download link... would be much appreciated.

    Alternative solution?...

    If I put these files on the SD card in my camera and click on and drag them on the macbook pro laptop as AVI files (instead of dragging to a PC first, as was the case)... don't you think it would make a diff?  Also, I tried sucking to the top of the camera first, but that didn't work... the camera turns on when connected to the computer... so that you can not navigate to a file on the camera and then use the GUI first to suck.

    I have a laptop. These original files play well with Windows Movie Maker because I downloaded the appropriate codec. Hi and low tried a mac version of this codec without result. CS4 my install discs do not work on Windows/PC. Trust me I wish they did! Even the configuration required on the package is in the absence of any mention of Windows. Windows Movie Maker convert .mov... that was my first game b4 plan, I realized that VLC was quite robust and user-friendly in its Export Wizard codec functionality.

    Any help would be much appreciated! I swear! I'm banging my head against the wall and I want to just change already!

    Thank you!

    Do not use the flow function; This isn't what you are doing.  (Although technically, I don't think it matters)

    Use the convert/save option.  The first screening, video - H.264 + AAC (MP4), should work great.  Don't change anything.  Save the file with a MOV or MP4 extension.

    If you get audio weird sounding, then create your own preset that matches the Video - H.264 + AAC (MP4) preset, uncheck only Audio the Audio tab and convert to video.  Then run convert/Save using the Audio - CD preset.  Save the file as a WAV (or an AAC?).

    Import the 2 files into PR.  You shouldn't have synchronization problems if the points are aligned in when you add them to the sequence.

    -Jeff

  • How to play (or convert) a file .avi on my MacBook Pro?

    How to play (or convert) a file .avi on my MacBook Pro?

    Probably by installing VLC, but some AVI files can not be played in Mac OS X; AVI is a container, not a format.

    (141493)

  • How to convert .mkv files?

    I have a Toshiba 40BV700B TV. I also have a USB key with .mkv video files saved on it

    Apparently, they do not like each other - any suggestions how I can watch my files on my TV... ?

    Any help apprecited - thank you

    Hello

    This is a laptop and a notebook forum options not quite sure if anyone would be able to help you here.
    However, as far as I know the TV supports only a file format FAT32 your USB drive must be formatted in FAT32.

    You can also try to convert mkv files to other formats like avi.
    There are a lot of tools as freeware * SUPER 2012 * which convert these files.

  • How can I connect sequence of database file version number?

    Hello

    As in the subject.

    How can I connect sequence of database file version number?

    Nothing like that under the purpose of registration.

    Here's how I did it:
    Configure-> results of treatment-> database-> schemas tab Options
    Copy + paste together generic Record
    Under the new scheme opened UUT_RESULT
    Add a new column - varchar type
    Set the value of Log as RunState.Caller.SequenceFile.Data.Version

  • How to convert 3ga files so that they play on Windows?

    changed title: Samsung Galaxy Player 5.0 8 GB Media Player

    I have the Galaxy G3 phone and I would like to share my voice recordings (which are 3ga files) on my laptop. How to convert this file so that it will play on iTunes or Windows Media Player?

    Frustrated,

    Isake

    I just rename 3ga in mp3 format, then it works well

Maybe you are looking for