Convert the string array to array of numbers

How to convert an array of strings (which are numbers) to an array of numbers so I can find the maximum value? I tried to use the code below in the excerpt, but my numbers come out too much.

It is much easier than that.

Tags: NI Software

Similar Questions

  • Convert the string with number of floats a number

    How to convert the string as "- 8.9E - 03" to a number of TestStand?

    Thanks in advance

    Hello

    Try to use the Val() function

    In the expression, it looks like this

    People of the country

    .nValue = val (Locals.strValue)

    Locals.nValue = Val("-8.9E-03")

    Hope this helps

    Jürgen

  • How do to convert the string (with the Hex data) in number?

    Hello

    I use TestStand 3.5 to automate a few test cases associated with boot loader.

    The requirement is that I need to read the value in some places for specific address. The values of these addresses are stored in a hexadecimal format.

    We have a step customized in TestStand through which we can read these values by address, but she returns as the type "String".

    For example, the value to 0 x 0000008 is 000001 B 2, and he returned in Locals.Value_Read as "000001 B 2" in the string.

    Is it possible, I can convert the string "000001 B 2" to a number?

    I tried to use the function-> val (locals. Value_Read), but it is return 0 as TestStand figures that the input string is not representing the valid number.

    Please help me with this.

    Thank you and best regards,

    Niraj.

    Try: Val ("0 x" + Locals.Value_Read)

  • Convert the string separated by commas in the rows

    Dear gurus,

    I want to convert the string separated by commas in the rows to insert in the collection.

    for example, the string 1234,2323,23232,2343,34234
    Higher up in the chain must be converted to ranks in order to insert into the table or the collection

    Thanks in advance
    Sanjeev

    String in rows separated to convert the comma.

    with t
    as
    (
    select '1234,2323,23232,2343,34234' as txt from dual
    )
    select REGEXP_SUBSTR (txt, '[^,]+', 1, level)
      from t
     connect by level <= length(regexp_replace(txt,'[^,]*'))+1
    
  • How to convert the string with numbers in the table of Boolean 2D

    Hello

    I have input a string with comma separated numbers 1,192 (starting at 1).

    This string must be converted to a table 2D-boolean. Each number that appears should be true, not true rest.

    The 2D table consists of 4 times of 0.47 Boolean values.

    1.48--> [0.47] numbers [0]
    49.96--> [0.47] numbers [1]
    Numbers 97.144--> [0.47] [2]
    145.192--> [0.47] numbers [3]

    If a '1, 49, 97 145' input string put all [0] [0.3] true.

    How can it be easy/fast resolved?

    Thanks for help

    Break the string of numbers in a table of numbers.  (Spreasheet String to Array).

    In a loop For, index with each issue of this table.  Use in the range and Coerce to see if it is in the range of numbers.  (You can put this in a loop For as auto good indexing through the ranges).  If it's in the range, then use subset replace table to activate the corresponding item in a real.  If this is not the case, do nothing.  Maintain the table of Boolean in a shift register.

    Repeat this step for each number in your table.

    (What is a class assignment?)

  • How to convert the string with numbers in U8 with ascii

    Hello

    I have a string with only numbers 0. 9 paper.

    Now, I want to convert to table-U8.

    He works here, but now the problem: How can I change each character to its ascii value?

    Example:

    entry: 123 (string)

    output: x 31, x 32, x 33 (U8-array)

    Thanks for the help

    It's very easy

    String to Byte Array Function
    Have the Palette: string/array/path Conversion functions

    Converts a string to an array of unsigned bytes. Each byte in the array has the ASCII value of the character corresponding to the string.

  • Convert the string of 32 bits to a hexadecimal number of LV 7

    Hello!!

    I have a 32 bit string I need to convert a hexadecimal number, what program I can do?

    Can someone help me?

    Thank you

    Each character in a string is a BYTE.  So you tell each of these I8s are 0 or 1?  If this is the case, then why not just use Boolean values (TRUE or FALSE)?  An array of Boolean would do this very simple since you can simply use the primitive Boolean array of numbers to do the conversion for you.

  • convert the string ASCI spell

    The attached VI allows me to convert a single ASCII character to the spell.

    If I have a string of ASCII characters, I can convert them to break the string into individual characters and converting each individually then forming a chain again. Is there an easy way to convert a hexadecimal ASCII without analysis string?

    For example: CN1003001A (string ASCII) must be equal to 434E3130303330303141 (string hex).

    Thank you

    String to byte array, number in hexadecimal string Concantanate String.

  • convert the string into individual components table

    Hello Experts,

    I would like to display an array of strings in a display of text/string. for example:

    My array of strings is:

    ['I', 'L', 'O', 'V', 'E', 'L', 'A', 'B', 'V', 'I', 'E', 'W'], and I want to show this picture as I LOVE LABVIEW in an indicator of the string and not an indicator array.

    How do I do that? I tried flatten to sting, but it added a lot of zero to the channel indicator, and the display is not only correct appearance.

    I hope my question makes sense.

    The functions of concatenate strings will do exactly what you want.

  • How to convert the string to a full decimal point and left shift

    Hey guys I tried to convert gps string to an integer, like this

    A string that is 2467.8976 and I need to convert it to a similar integer as point of this 2467.8979 so that I can shift the decimal point to the left (24.678979) which i coudnt do it with the chain. It's just been my 2 weeks with the labview so be gentle. Thank you

    Hi Awais07,

    Once you have created an indicator that signals the output of parsing the string, right-click on this indicator > display... Format > increase the value of the digit 9

    Kind regards

    Lennard.C

  • How to convert the string in milliseconds

    Hello

    Please suggest how I can convert a string (October 9, 1989) in milliseconds...

    If it has a certain format, you can use HttpDateParser, otherwise create a calendar object, set the relevant values and get the time to it.

  • Problem with convert the string to date using DateTimeStringConverter

    Hello

    I would like convert string date (JJ/MM/AAAA) - it is useful to compare dates in TableColumns.

    so I use DateTimeStringConverter (the string "01/11/2014" is a value of date picker)

    DateTimeStringConverter format = new DateTimeStringConverter (Locale.FRANCE,

    "dd/MM/YYYY");

    Date d1 = format.fromString("01/11/2014");

    D1. ToString()

    "I do not get the right date, but that date =" Mon Dec 30 00:00:00 THIS 2013!

    I don't understand what the problem is (which in fact should not be a problem)?

    Any ideas?

    Thanks in advance

    Fabrice

    You have an error in the spec use format ' dd/MM/YYYY' instead of 'dd/MM/YYYY '.

    DateTimeStringConverter f = new DateTimeStringConverter(Locale.FRANCE, "dd/MM/yyyy");
    Date d1 = f.fromString("01/11/2014");
    System.out.println(d1.toString()); // --> Sat Nov 01 00:00:00 CET 2014
    

    If you do not need long, I would use DateStringConverter

  • convert the string to type vCAC:vCACHost

    Hi all


    I have a client that wants to start a flood of vCO from an external source using the REST API of vCO. One of the arguments sent to the vCO workflow that will trigger, is the vCAC hostname.

    My question is - since the arguments acts as a channel of appeal REST, how to convert into a vCAC:vCACHost object in order to be used in a script in my stream.


    Thank you.

    Your customer can either pass a string representing the object to the REST API as described in this tutorial.

    Otherwise they can pass a string containing the host id and get the object vCACHost in the workflow like this:

    var vCACHosts = Server.findAllForType("vCACHost");
    
    for each (var vCACHost in vCACHosts) {
      if (vCACHosts.id==histId) {
       var matchingHost = vCACHosts;
      break;
      }
    }
    

    If there were many guests then I recommend using the entityManager to filter by ID and then by converting the entities back to object with the getInventoryObject() method as described in this article.

    1 problem, 3 solutions

  • Structure from case string "&lt;------"-LabVIEW converts the string

    Hello

    I want to parse the string lines read from a data file.  Some chains start with the characters ".<\".  when="" i="" enter="" this="" kind="" of="" string="" as="" a="" case="" in="" a="" case="" structure="" the="" string="" is="" being="">

    For example, I'm going home. "<\C" (upper-case="" c)="" as="" my="" case="" string,="" it="" changes="" to=""><\f".  if="" i="" enter=""><\c" (lower-case="" c)="" as="" the="" string="" it="" becomes="">

    I am currently using LabVIEW 2012.

    Any ideas what's happening?

    Thank you

    Ian

    Some ASCII characters are nonprinting control characters (less than 32 values). These are sometimes encoded using the backslash code and it seems that is what makes the structure of matter - when you type \C, the structure of the performer as "oh, you want the value 0x0C ASCII, which in the code for backslash is represented" as \f (means 'form feed). "When this is the case, you typically use one-to represent the------characters, so you really need set the structure to match on.<>

  • How to convert the string to the variable of the apex

    Hello

    I need to replace the overall point of the table column value chain in its value of origin when the page is rendered.

    the process code - plsql
    -column replacestring contain the string F100_EMPID value
    declare
    REP varchar2 (100);
    Start
    Select replacestring in the rep of emp;
    Select Replace ('EmployeeID', replacestring) in the content of emp;
    HTP.p (content);
    end;

    The output is:
    The employee ID is: F100_EMPID.

    but I need the actual value of the global element when the process is rendered.

    Select Replace (content, "EmployeeID",: F100_EMPID) in the content of emp;

    This statement gives a correct output: Employee id is: 230092

    I need to replace the string in the column of the table in the real global element inside the plsqcode for dynamic rendering code.

    someone please help me solve this problem.

    Thank you.
    ~ Logaa

    Hello

    What happens if you use:

    Select Replace (happy, 'EmployeeID', v (replacestring)) in the content of emp;
    or maybe
    Select Replace (content, "EmployeeID", v ("| replaceString |")) in the content of emp;

    Greetings,
    Roel

    http://roelhartman.blogspot.com/
    http://www.bloggingaboutoracle.org/
    http://www.Logica.com/

    You can assign this answer to your question in marking it as useful or Correct ;-)

Maybe you are looking for

  • Cannot search iTunes store

    I use iPad Pro, with iOS 9.3.4, on my private home wifi network. Date and time properly set up on this device. Correct AppleID is set up with the iTunes Store and Apple music. Cookies in Safari allows "Web sites that I visit. I don't get any results

  • M7 k111dx: supposed weird graphics bug after update to windows 10

    I upgraded to Win10 on day 1 and thought that everything was ok. Then I closed my computer and made after the drive hard light off, the power lights could not do the same thing. I had to make a "force stop" making them to extinguish. Windows don't th

  • Variation of thermocouples (+ - 2 ° C) and are under the same conditions

    Hi, my English is not the best but I trust in your intuition and intelligence capacity. Actually Im connecting many thermocouples (type J) in a DAQ 9213. I managed to take all measures (7 thermocouples) and also the thermocouples are calibrated. My p

  • Error - Server cannot be found. Can't connect to WIFI in Windows XP machine.

    Original title: I can't connect to wifi using my laptop. I can log on when perfectly well using the ethernet adapter and my cable modem. I can't connect on wifi with my laptop. "Wireless network connection" reads "connected." Power supply: 'excellent

  • After that the effects window is off screen

    My question is the same found here: CreativeCOWBut I'm on windows...I tried to restart AE, but the window always off-screen...