Converter USB-Ethernet Lenovo's tab 2 A10 - 70F

Similar Questions

• Tab 2 A10 - 70F: Internet access via USB connected 3G / 4G device?

  Hello

  The A10 - 70F Tab2 has WiFi only. Is it possible to connect to the internet with a connected USB 3G / 4G? With other words: the tab can handle? Anyone with experience?

  Thank you in advance,

  Michael

  Yes is the short answer. And a few ways to do this:

  1 micro USB Dongle of 3 / 4 g

  2. micro USB to USB 'female' - then plug a 3 / 4 g USB Dongle

  And a couple of less obvious ways:

  1 WiFi connection to another mobile and use of mobile data of quotas (although plans only works on some data)

  2 micro USB to Micro USB and connect a mobile as shown above (does not work on all devices, although I look at the phone and tablet to fight for the battery juice is hilarious)

  3. connected to a PC via the cable USB/WiFi connection internet PC use.

  But yes, 3 / 4g Dongles work indeed & the Tablet seems to walk along very well with a micro USB version or a USB version with an adapter cable.

• Cannot create folders after update of Lenovo to tab 2 A10

  My Tablet has downloaded an update for Lenovo this morning. After the update, all my files are gone, and my apps are spread over two pages in alphabetical order. I'm unable to hold and drag to create new folders. When I take an application icon, it brings to the top of the home screen to move the shortcut to the application. How to create folders after update?

  I just thought of it. You must move the shortcuts to the application in one of the home screens, then you can hold and drag to create folders. This seems like an unnecessary extra step...

• ext4 and SD - tab 2 A10 - 70F cards

  Although the android root file system is ext4 tab 2 seems to be able to use a fat32 formatted miniSD card.

  1. is there a way so he can use the formats of ext4, f2fs, exfat, ntfs file without rooting?

  2. If I root, what is the best way (s) to obtain the support of ext4, f2fs or exfat/ntfs?

  Here's how you get exFAT and NTFS support.

• Then the tab 2 A10-70 Lenovo run all creative Cloud applications?

  Hi, I take a few beginner courses graphic design and I have a small budget, but I need a computer or a tablet that will run the creative cloud apps. I was really interested in the Lenovo tab 2 A10-70, but I don't know if he can run all the applications. Any help would be appreciated. Thank you very much.

  It runs the Android operating system, so you cannot run any desktop applications such as Photoshop or Illustrator on it.

  It will operate the mobile applications such as Photoshop Mix cloud and Photoshop Fix, sketch of Photoshop and Illustrator to draw.

  Adobe mobile, iPhone, iPad, Android apps | Adobe Creative Cloud

• Tab 2 A10 70L - should I upgrade?

  Hi guys, I have a question to ask. Will I pass my tab 2-10-70 L lollipop 5.0? I got the update. I'm worried because everyone has problems with it. Any thoughts?

  Mod edit: System model added to the front of the subject line to improve visibility / clarity.

  It is no problem to operate, it has literally worked out of the box for me (my tablet was preinstalled Lollipop).

  Just to be clear: Haho asks on the A10 - 70L (LTE) 2. I do not have this tablet, but I have almost identical 2 tab A10 - 70F, the WiFi-only 'model sister.

  Of course, there are some things in Lollipop which are not large, as the percentage of battery missing display in the upper right corner (the percentage is still displayed in the quick settings pane). But things like this can often be changed with root + Xposed + GravityBox, I would use anyway, no matter if the Android 4 or 5.

  Google Earth will never block on my phone with 4.4.2 either, but it certainly plant on this tablet with 4.4.4. I've seen other people mention here in this forum, but it was drowned out by complaints of Lollipop.

  Could be a problem with Google Earth, or possibly a problem with 3D Kitkat pilots that could affect other applications such as 3D games...

  • As I said, the lollipop is faster, at least in the benchmarks (everything is not perfect, however, the scores of Java memory read/write took a dive).
  • Lollipop has less unfixed security vulnerabilities.
  • Also note how the Kitkat screenshot at the top, the two buttons below "resources:" are invisible (black on black) - a side effect of Lenovo messing around with the theming Android to Kitkat (change the decorations by default black to white, etc..). This happens with several applications; not often, but it is a problem. Lenovo did not try to personalize Lollipop that way, which is a plus.
  • Similarly, the component that many apps Android webview uses to display content (content and local content real web) Gets Play Store updated with Lollipop. Not the same with Kitkat. Given that the code of the web browser is known to have security flaws, it's also a plus for the pacifier.
  • Brings us also by the way some applications aren't available for lollipop and upwards, for Kitkat. Rare so far, but it is worth noting.
  • These tablets (A10 - 70F and the A10 - 70 L) are running a background called AALservice. It screws with the brightness of the backlight, which I find unacceptable. In Lollipop, LDA also has a significant performance impact. It's a negative fact, of course, but at least it is very easy to not disable, no root required, just some know-how. Making a positive. In Kitkat however, AAL does not appear to be (good) performance issues, but the boring auto brightness changes exist as well, and you can't disable them (very bad). If you have root or a custom, recovery you pouvez disable AAL on Kitkat too, but only because I created a patch for it.

• Tab 2 A10-70 - glued hourly language/time zone screen

  turned on my tab 2 A10-70 for the first time - it shows the screen of "set the language and time zone, but I do nothing that do accept the choice that I have selected.

  The only thing that looks like a button is the small blue dot at the bottom, but nothing happens, no matter where I touch or swipe.

  It allows me to change the language and time zone, and when I do, the lenovo logo down inside a little bit, but still nothing.

  Mod edit: System model added to the front of the subject line to improve visibility / clarity.

  have you seen the arrow in the lower right on this box? It is small enough

• USB ethernet does not work after update to Mac OS sierra

  Hello

  I use end of 2014 Macbook pro 15 "running Mac OS Sierra.

  Before the update for sierra, Captain, EL on OS USB ethernet has been working well, but after that the update for Sierra USB ethernet does not work, "showing the cable disconnected.

  Please advise and thanks in advance.

  Do you use the Thunderbolt Apple > Ethernet card?

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  The adapter works in recovery mode?

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• How to close a currency converter opens in the same tab in the sidebar?

  XE currency converter bookmark opens the same thing, but the tab of sharing with the previous site appearing as sidebar. How to cancel this setting, which is now on all consecutive tabs too, currency converter is displayed in all tabs and I don't know how to close it.

  -> Press CTRL + B to open the bookmarks bar

  -> right click on the bookmark appears in the bookmarks bar-> click on Properties -> uncheck load this bookmark in the sidebar -> click on the Save button

  -> To press CTRL + B to toggle the bookmarks bar

  Check and tell if its working.

• Converter USB/serial for Satellite P100-112

  Hi, I need to buy a converter usb/serial for my P100-112. The one I have, I can't make it work with my current machine. Tips for what to buy would be appreciated.

  Hey Buddy,

  I googled a bit around and found an example for a converter that can be useful for you:

  http://www.ramelectronics.NET/HTML/usb_serial.htm

  Please give some feedback what you need exactly, maybe find us something better...

  Welcome them

• Tab 2 A10 - App icon missing

  A tab 2 A10 bought it recently but it took over and replaced him on the advice of Technical Support. Now more questions.

  The first has a little button in the bottom toolbar that showed all the applications available. It doesn't have the same available button so I have to turn to page to see what's there. Ask yourself if there is in this tablet or simply what is displayed on the pages of other applications? In the other, with the apps key, all that are shown on the "bonded" pages for use. Do not have this choice, to view all available applications (if any) there could be in the tablet. Suggestions?

  Thanks for any help. New Android tablet, so be patient.

  FFP

  Mod edit: System model added to the front of the subject line to improve visibility / clarity.

  Do not take into account. Do you have a factory reset, several updates installed, working all right now.

• ProBook 430 G3: USB ethernet adapter cannot be enabled.

  Hello

  I have to connect the public network with integrated lan card and share another PC via the USB ethernet adapter.

  After installation of the USB adapter, the card is automatically disabled and it displays the error code 22 in Device Manager.

  Once I click on activate the device, it can be activated for less than 1 second, and then goes back to the people with reduced mobility.

  This condition occurs on these two chip axis and the Realtek chip.

  Are there solutions to enable the USB card successfully?

  I found the root cause that there is an application automatically disabled my NIC after the slaughter of the application, the NETWORK adapter can be enabled correctly.

• Add a printer series using RS232 converter USB Vista

  I tried to use a converter USB to RS232 to connect a HP Laserjet 5 L printer to a laptop using windows vista.
  The driver for the converter has been added and is recognized by the computer, but I'm unable to add the printer from the control panel (I have the printer driver).

  Should I change the settings of the printer in the port section or any changes since the Device Manager?

  Any help would be appreciated.

  Hey Fabian,.

  HP LaserJet 5 L seems to be a very old printer and it seems that there are no updated drivers from Hpwebsite for Vista based computers: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=15005&prodTypeId=18972&prodSeriesId=25480&swLang=8&taskId=135&swEnvOID=2093

  The printer is recognized as new hardware found?

  If possible, connect the printer directly to the RS232 port on another computer and check what is happening.

  Other USB devices work fine on this machine?

  Diana
  Microsoft Answers Support Engineer

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Construction 9333 XPS with USB ethernet problem

  Hi all

  I'm having a problem with OSD on the XPS 13 9333. I can perform a PXE device boot and install the OS I applied also all pilots of the driver of the CAB on the DELL (http://en.community...ent/w/wiki/2065) website.

  The problem I have is after the task sequence installs the operating system and drivers it reboot to windows 7, once it restarts the USB ethernet is no longer installed so the task sequence will fail.

  I use a Dell fm76n usb ethernet for network device and I have created a driver package to install the driver supplied with the unit but it will still not set please help

  RESOLVED:

  The issue seems to be related to the driver 'bus PCI. When I removed this form the driver package my OSD task sequence finished without any problem

  Concerning

  Robert

• Sony Ericsson W595 USB Ethernet problem...

  I have a Sony Ericsson W595. There is an option in the phone which allows me to use the PC internet on the phone. However, when I use the USB Ethernet mode, can't do internet on the phone. In Network Center, it says 'Public unidentified network'. Using Network Diagnostics, it tells to restart the phone. Even after reboot, I get no Net. Diagnosis shows that "' ' Sony Ericsson HSPA 3.6Mbps ' is not a valid ip configuration". " PLEASE HELP ME!

  Hi Su Haris,

  The question you posted would be better suited in the Sony Ericsson Support. I would recommend posting your query in the Sony Ericsson Support Forums.

   

  Sony Ericsson Support

  http://www.sonymobile.com/us/support/phones/W595/

  Hope this information helps.