Copy a project and media for the new hard drive

Similar Questions

• Recover the Original of Windows 8 for the new HARD drive

  Hello..

  Drive HARD original of my Dell laptop inspiron 15R 5521 has been crushed. She had previously installed Windows 8.

  And, I had upgraded to windows 10 recently.

  Please guide me to reinstall windows 8 or 10 for the new HARD drive via online, coz' I don't have any support recovery (DVD or USB).

  And further,

  1.) is it possible to reinstall windows for one SSD?

  2.) I get all venus applications (application of VGA, Audio application etc.) from Dell with my laptop with the re-installation of windows... ?

  Thank you

  Tilan

  If your system already has Windows installed and activated 10 follow my instructions here to directly download and reinstall clean Windows 10:

  http://dellwindowsreinstallationguide.com/download-Windows-10-OEM-and-retail-ISO/

  http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows-10/Windows-10-clean-reinstallation-via-bootable-USB-from-ISO/

  Looks like you're in this scenario.

  Note Windows 8.1 and Windows 10 editions are specific. If your system came with Windows 8.1/10 unilingual homepage, Windows 8.1/10 will not be activated.

  Unfortunately there is no clear marker for end users to determine the edition so my advise is to try first to try Windows 10 Home, if she does not activate Windows 10 unilingual homepage.

  Get a SSD for optimal performance.

  Dell have updated drivers for Windows 10 pilots (WT64a) system:

  http://downloads.Dell.com/published/pages/Inspiron-15R-5521.html

  See installing the driver recommended order:

  http://dellwindowsreinstallationguide.com/2015/09/27/driver-installation-order-Windows-10/

  If Windows 10 was not enabled you must reinstall Windows 8.1 and then upgrade. Follow my instructions here:

  http://dellwindowsreinstallationguide.com/download-Windows-8-1-retail-and-OEM-ISO/

  http://dellwindowsreinstallationguide.com/upgrading-to-Windows-10/

• Followed my previous inquiry, my hard drive crashed and lost my copy of Acropbat 9 in installing the new hard drive.  How can I go to re - install Acrobat 9 from the disc, I hold. Thank you, Don Hamilton

  Followed by my previous inquiry, my hard drive crashed and lost my copy of Acrobat 9 in the installation of the new hard drive.  How can I go to re - install Acrobat 9 from the disc, I hold. Thank you, Don Hamilton

  Just reinstall from the disc (or download it from https://helpx.adobe.com/acrobat/kb/acrobat-8-9-product-downloads.html) and activate it with your serial number.

  If your number of activations exceeds max (2), then you will need to contact customer service.

• need to upgrade 250 GB hard drive, how I transferred all my files and xps3 pro for the new hard drive without lsing all this?

  need to upgrade hdd 250 GB how I transferred all of the files and opperatting sys win xp sp3 new disk hard ad not lose any

  Hello

  You cannot transfer the operating system from one hard disk to another. But you can use the backup utility to backup data and restore it on the new hard drive.

  Reference:
  Install, reinstall, or uninstall Windows
  http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall
  How to use the backup utility to back up files and folders in Windows XP Home Edition
  http://support.Microsoft.com/kb/308422
  How to use the backup utility to back up files and folders in Windows XP Home Edition
  http://support.Microsoft.com/kb/320820
  How to use Backup to protect data and restore files and folders on your computer in Windows XP and Windows Vista
  http://support.Microsoft.com/kb/309340

• EliteBook 840 2: Procedure for software install OS and HP on the new hard drive

  Hello

  After a hard drive failure, I got a new hard drive and CDs (one with Windows 10) 2 and 1 with HP Appplication and recovery driver.

  I am looking for the procedure correctly reinstall my new hard drive, as if you just plant: with partition drivers and so on... But I've been to find such a procedure on the web.

  Could you tell me if there is somewhere? or could you help me by telling me if I should install the operating system first and then the HP software or on the contrary, before you start. Thanks in advance

  Hello

  Please use the following steps:

  1. install the new HARD disk on your computer,

  2. start Windows 10 DVD machine. This process will install Windows 10 on your computer,

  3. put the second DVD of your computer to install the drivers and tools/software on your computer.

  4. run the Windows updates.

  Steps 1 to 3 will bring your machine back to factory settings,

  Step 4 will bring machine to update.

  After that, you can install other software or programs.

  Kind regards.

• Satellite A100-225 keeps freezing and crashing with the new HARD drive

  Hi all

  I have a Satellite A100-225 with a 100 GB SATA Hitachi drive I int it that recently started showing bad sectors. Then I bought a Hitachi 320 GB SATA II drive to replace it. I tried the drive and it was recognized right away, so I didn't need to change the SATA speed. I ran the restore a disk installed newest. The problem I have is that the computer keeps freezing and crashing with the new drive. It takes a lot of time to load up when turned on and there is a noticeable to untermittant delay when you drag the cards around solo.

  I tried to run the Hitachi drive test and it comes back fine. I also tried to turn the SATA speed of the drive down from 300 to 150 via the firmware, and although I saw a slight improvement, it is still not right.

  I talked to Hitachi and they say that he could not be 100% compatible, so the problems. Someone at - it else sucessfully set up a replacement for this notebook drive and if so what make and model. Has anyone else had simular problems?

  Thank you

  Years ago, I've updated yet more former Satellite M70 with SATA HDD (270 GB if I m remembering well) and everything was fine.
  In my view upgrade with SATA HDD normal shouldn't be a problem. Do not SATA II because it will not work faster.

  I can't say for sure, but there must be a compatibility problem.

  Let's see if someone else had better luck with the upgrade of the disk on the Satellite A100.

  Have you checked this forum with advanced search option? Maybe you can find some old NET on upgrade the HDD on A100.

• Restore Vista Premum (32-bit edition) for the new hard drive from the laptop when original disks are lost?

  Hello

  I'm trying to upgrade from my son's laptop computer and want to replace the current drive with a much larger.

  It is running Vista Home premium Edition (32 bit) and he lost his records came with the laptop: I can do?  I bought Windows 7 Upgrade and a disk hard sata 500 GB, but I need to get Vista on the new drive before Windows 7 readers.

  I backed up the data using Windows Easy Transfer for issue restores the operating system.

  Please note that this is a laptop, I can only have a hard drive up both and I don't know how to get the operating system to the new blank disc? I can create a recovery on a DVD disc / C or something Vista or a 3rd party utility?

  Any help is greatly appreciated!

  Contact the manufacturer to see if you have a recovery Partition and if it can create recovery discs.  If so, create the recovery disks and you will be able to use them to restore the system to factory conditions once you have installed the new drive (but you may need to install the new Vista compatible drivers for the new drive as the recovery disks can have only those for the old disk).  Otherwise, contact the manufacturer and get a set of recovery (at a modest price) discs and use them to restore the system to the conditions of the plant on the new drive.  When we talk to them, confirm that their recovery process allows you to install new drivers for the new drive hard during the process and exactly how do (or it doesn't work - so be sure to check it out).  We cannot help you with recovery of the manufacturer process as it their not Microsoft.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Hard disk failed to keep windows 7 for the new hard drive or SSD

  Hi, windows told me recently there is a problem with my hard drive and that I would back up my data to an external storage device, in case it fails, but don't want to backup my files because they aren't important. When I tried to access file Explorer the next day I got the warning my computer froze. I'm not him have not restarted the laptop since then in fear that it could make it more worn, since I may still need it.

  I try to order a new hard drive or SSD and won't buy windows 10 because it's expensive. Instead, I want to keep my current operating system, which is windows 7 Home premium, which is preinstalled on my laptop.  I have no recovery disks and I didn't do all the backups at all, but here is a windows 7 product key stuck on the back of the laptop.

  I was wondering if I can use the product key to install windows 7 on the new HDD/SSD and if yes, how, I would go to this topic. Also, if I can't do the wrench is it another way (because I may be able to use it yet), because I don't want to have to buy any other OS.

  Specifications:

  Laptop: TOSHIBA Satellite A660

  OS: Windows 7 Home Premium

  (Let me know if you need more details)

  Thanks for any help.

  If you are still able to boot from the Windows 7 Desktop on the current hard drive, try to create a set of recovery disks. See the instructions in the following article:

  https://NeoSmart.NET/wiki/Toshiba-Recovery-disk/#Create_disc_for_Windows_7

  After you create the defined recovery disc, close, install the new SSD, then use the updated recovery disk to reinstall Windows 7 on new disk SSD.

  You will need 4 blank DVDs.

• Satellite A200-1AG - Limitation of size for the new HARD drive?

  Hello

  I want to improve my laptop with a new hard drive. It came with SATA 150 GB and I want to get a 320 GB Western Digital HD. Never changed the disk in a laptop and I don't know if there is no restriction on the voltage, overheating...

  Any help is appreciated. Thank you!

  Hey U-mass,.

  There is no limit of capacity as on the old IDE interface on the new SATA interface. This means that you can buy this 320 GB HARD disk or another HARD drive. Each 2.5 HARD drive to SATA interface is theoretically possible to use.

  One more interesting thing is RPM HARD drive. There are hard drives with 5400 RPM and 7200 RPM. The latter is a little faster but needs more power and produces more heat. Normally, 5400 RPM is sufficient

• Install Windows XP disc required for the new hard drive

  I bought an Inspiron 510 m new Dell laptop some time ago and am trying to install a new hard drive. However, even though I have the license key of Windows XP on the sticker on the laptop, I don't have a Windows XP installation CD - Dell would be please to send me an and let me know who I need to contact my details?

  Thank you very much

  Good news - I just called Dell who have been extremely helpful technical support. They had no problem talking to me and agreed to send me a replacement at a reasonable cost drive, and it seems they still distribute XP discs. Just thought I would post only in case it helps others in the same boat.

• Try to install the CS6 and Design and Web on the new hard drive

  MacBook Pro OS10.11.1 of operation. I try to install CS6 and Web Design Premium CS6 DesWebPrm 1.sparseimage. It is a registered in my years of hard drive and has worked in the past, whenever I need to re - install. Now it hangs in the installation process to 'Currently install Adobe Dreamweaver Widget Browser' installation is at a standstill at 31%

  Can someone help me understand this issue?

  Use the bons installation file.

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC | XI, X | 9,8 | 9 standard
  • Premiere Elements: 14, 13, 12, 11, 10: 9, 8, 7
  • Photoshop Elements: 10, 12, 14, 11, 13. 9,8,7
  • Lightroom: 6| 5.7.1| 5 | 4 | 3 | 2.7 (win),2.7 (mac)
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  window using the Lightroom 3 link to see these "important Instructions".

• How to copy the recovery on the new HARD drive partition, HARD drive failed?

  Hallo,

  I have a Compaq Mini netbook with Windows 7 Starter.

  The HARD drive has failed and it is not repairable. However, it seems that the recovery partition is OK.

  I want to buy a new HARD drive, install the driver on the netbook, and then use the tools/recovery partition to install windows 7 on a new PC.

  So, the question is simple: how to copy the recovery for the new HARD drive partition?

  Hello s91066.

  If your hard drive of your laptop doesn't have? If this is the case, what do you mean by the "recovery partition is ok? I doubt that this laptop has two hard disks, so if you are able to see this partition of your hard drive may still work.

  You will need a set of recovery disks to restore the partitions on the new drive. If you can start Windows, which you can probably not with a dead hard drive, you can follow these steps if you can get into Windows.

  If you are unable to boot into Windows, you need a set of disks. You can order it directly from HP. The number of the United States / Canada is 1-800-474-6836. If you are in another domain, you must visit HP's Support around the world to find contact information for your region.

  I hope that is useful; have a great weekend!

• Cannot install Vista on the new hard drive

  original title: Please help!

  I have a dell laptop inspiron 1720, not the newest I know but it surfs the web. At least it used to. I had some sort of virus or something and my hard drive kept bluescreening on me. I said, well I want to do this thing faster and have more space anyway. Out a ram 1 g got 4g, out went the 120gig and got a 250. Went to reinstall dell support stuff and it went well. Then had my vista disk and started to install. Expanded files ok and everything. You all the way to the install tab end and nothing happens? Don't know what else to do? Any help would be great.

  Turns out I'm only semi retarded. My friend told me since I have a new hard drive, I would probably need to first load the driver for it. Then I got to the part when you choose a car and chose to load drivers. Of course I had to change discs in the middle of install and load a driver for the new hard drive and everything went smoothly after that.

• Installed the new hard drive and now can't activate Widnows 7 as it says not valid for clean installation

  This computer is having problems and we tried to upgrade to Windows 7 hard drive crashed.  We installed the new hard drive.  Now, we try to activate this copy but code comes up saying invalid for a clean install.  We need to have some new code or just get ours to work.

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• HP G71: Install the new hard drive and the raw copy

  Hello

  My HP G71 is 64-bit, 4 GB RAM and hard drive WD320BEVT. The laptop has more than 5 years of service and I want to replace with a new hard drive while performing a raw copy of the current. I have a dual boot Win 7/Ubuntu installation I want to keep on the new hard drive.

  As I have not found a new HD of the same type and capacity, I would like to replace the current one with an another Western Digital 2.5 ", the IDE interface, but with a capacity of 0.5 to 1 TB (I choose one or the other).

  My questions:

  -can I install one of these hard drives on this laptop? They are compatible with the current BIOS/chipset?

  -If I make a raw copy of the 320 GB drive to the 0.5 or 1 TB, how would the current operating system partitions will be reflected in a higher capacity drive?

  -J' bought an IDE/USB interface adapter as well as to make possible the raw copy, could you recommend, if these questions have the THUMB, a good free to use software that I could use?

  Thanks for your help!

  Yes I use Kubuntu and tried several times to just the entire disk image and it does not reproduce partitions Linux and Grub, but when you try to start Linux it will hang and say can not find the prior specific hard drive. So now I just make a backup of Windows and reinstall Kubuntu from scratch. Much easier. I think there are also Linux backup programs you can use, but never really saw the need.