copy and paste the Chinese text in CS6 arrives as places please help

Similar Questions

• BlackBerry Q10 frustrating to select, cut, copy and paste the missing text and trackball

  Dear Blackberry, I immediately need an app to activate the touchpad virtual across all publishers note, email and sms where I am able to easily select, copy, cut, paste any text.

  It is very urgent but also important, for me to continue usign Q10.

  All users, you are also facing this problem, we will find a developer, who can develop it. If blackberry decides to take a lot of time to do this. That's my idea.

  It has significantly reduced my productivity.

  Hello such RR_on_Q10

  If you want to select copy cut paste a text, it's easy, just drop your finger on the text to be copied, and you will be able to copy, select, paste, share.

  I use Mac OS 10.2 and is very easy with just leave your finger a few seconds, you'll have the options you want.

  Kind regards...

  • Answer you like me? You want to THANK? Click
  • If it was the SOLUTION click on "accept as Solution!
  • #4LL   #ichooseBlackBerry10 @Gutijose14

• Security How can I remove the copy and paste the files I used?

  Security How can I remove the copy and paste the files I used?

  I can't get rid of all the e-mail addresses I have copied and pasted.  No matter what I will always appear if I hit paste again.  This is a shared computer and I would rather not have my copy and paste the files stored on the computer, after that I quit.

  Thank you

  Hi Ron,

  You can copy or move information (for example, text and pictures) between files and programs using temporary storage called the Clipboard. The Clipboard is not visible, so even if you use it to copy and paste information, you never actually see the Clipboard when you do this.

  The Clipboard contains a block of information at a time. Whenever you copy information to the Clipboard, the old contents of the Clipboard is replaced by the new information.

  When you shut down the computer everything is stuck in the memory of the Clipboard is cleared.

  Please click the below mentioned link to get an overview of the clip board memory.

  http://Windows.Microsoft.com/en-in/Windows7/copy-information-between-files

  Answer please if you have any questions.

• Copy and paste the code which gives different results

  I use PS CS5 and need to copy and paste the code from one page to another. The reason is that the only difference is a change in the images and titles.

  When I view the page copied in a browser the table continues beyond the wrapper div and none of the images are visible.

  Here is the copied code:

  <! DOCTYPE HTML > < html lang = "en" >

  < html >

  Head of <>< name meta = "robots" content = "INDEX, FOLLOW" / >

  < name meta = "robots" content = "noimageindex" / >

  < name meta = "description" content = "Ace with checkered flag logo" / >

  < name meta = "keywords" content = "Top Trumps, Ace, flag at checkerboard, Classic Cars, drag racing, heavy trucks, 500 miles of Indianapolis, International bus, luxury cars, luxury cars Made in Germany, Yachts of luxury, the NASA Super Jets, cars, Rolls-Royce, Street Bikes, street cruisers, Super-Bikes, Super Sonics, Super Trains in the world." / >

  < title > < /title > checkered flag

  < link href = "css/table.css" rel = "stylesheet" type = "text/css" media = "screen" > "

  < / head >

  < div id = 'wrapper' >

  < body >

  < div id = "bread crumbs" >

  < a title = "Return to Homepage" href = "index.html" > home < /a > & bull; < a title = "Go back to index of England" href = "england.html" > English Top Trumps < /a > & bull; "< a title ="Back to Ace Index"href ="... /... ' / index.html - ace "> Ace Index < /a >

  < / div >

  < div id = "banner logo" >

  "< img src ="... /... / images/title.jpg ">"

  < / div >

  < div id = "page title" > < flag checkerboard of h1 > < / h1 > < / div >

  < div id = "table" align = "center" >

  < table >

  < thead >

  < b >

  < th = "column" range > Classic Cars < /th >

  < th = "column" scope > < /th > Dragster

  < th = "column" scope > < /th > trucks

  < th = "column" scope > Indianapolis 500 < /th >

  < th = "column" scope > International bus < /th >

  < /tr >

  < / thead >

  < tbody >

  < b >

  < td > < img title = "cars classic Ace assets with the checkered flag" src = "images/futbol_yildizlari.gif" > < table >

  < td > < img title = "Dragster Ace assets with the checkered flag" src = "images/HP-ve - zumruduanka.gif" > < table >

  < td > < img title = "Trucks heavy Ace assets with the checkered flag" src = "images/hp_ve_ateskadehi.gif" > < table >

  < td > < img title = "Indianaplis 500 Ace assets with the checkered flag" src = "images/karayip_korsanlari.gif" > < table >

  "< td > < img title ="Bus International Ace assets with the checkered flag"src ="... /... / images/international_buses_ace.gif ' > < table >.

  < /tr >

  < b >

  < td > click on the < table > image

  < td > click on the < table > image

  < td > click on the < table > image

  < td > click on the < table > image

  < td > click on the < table > image

  < /tr >

  < / tbody >

  < thead >

  < b >

  < th = "column" scope > luxury car < /th >

  < th = "column" scope > luxury cars Made in Germany < /th >

  < th = "column" scope > < /th > Luxury Yachts

  < th = "column" scope > the NASA Super Jets < /th >

  < th = "column" scope > race cars < /th >

  < /tr >

  < / thead >

  < tbody >

  < b >

  "< td > < img title ="Luxury cars Ace assets with the checkered flag"src ="... /... /images/luxury-cars-ACE.gif' > < table >

  "< td > < img title ="Cars luxury Made in Germany Ace assets with the checkered flag"src ="... /... / images/Lux_Cars_Made.gif ' > < table >.

  "< td > < img title ="Luxury Yachts"src ="... /... / images/Luxury_Yachts.gif ' > < table >.

  "< td > < img title ="NASA Super Jets Ace with checkered flag"src ="... /... /images/NASA_Super-Jets_Ace.gif' > < table >

  "< td > < img title = 'Race Cars Ace with checkered flag' src = '... /... / images/Race_Cars.gif ' > < table >.

  < /tr >

  < b >

  < td > click on the < table > image

  < td > click on the < table > image

  < td > click on the < table > image

  < td > click on the < table > image

  < td > click on the < table > image

  < /tr >

  < / tbody >

  < /table >

  < / div >

  < div id = 'foot' >

  & copy; 2005-2016 Ultimate Top Trumps. All rights reserved < / div >

  < / body >

  < / html >

  Thanks in advance.

  At first glance, I see that you have a wrapper

  before the openingtag. You can't do that.

  Run the validator at http://validator.w3.org/nu for a list of your html of your page errors. Clean and your page should work fine.

• If I create a series of changes in a single video, can I copy and paste the changes in several videos?

  Hello

  I tried to do a series of queries to find my answer, but I think that my knowledge of the names of functions is not good enough to create the correct search.

  I'm in a band & use first mainly to edit our videos together for our YouTube channel. At the end of each video, we have a "bumper" of sorts that has tiles of recent videos. Is it possible that I can copy and paste the Group of changes/clips/transitions through different first projects?

  I know that I can create a static bumper and import this video file. The problem here is that the content will remain the same in the bumper of each video. I want to copy the animations and text that I created that says "Watch our last concert" "shows our last cover song" etc. Videos that highlight these animations change as the weeks pass.

  Any help you can lend would be most appreciated!

  If I understand correctly, this could be accomplished with nesting.

  Add each 'recent' clip to its own sequence.  Nest sequences in a 'bumper' sequence, then change them as if they were clips.  Finally, nest the "bumpers" sequence in a "weekly" in the end sequence.

  Configured this way, you can edit clips in the "recent" sequences, and these changes will be reflected everywhere where these sequences are nested.

• Can I copy and paste the name of the current file?

  I need to insert the file names of the property in code. Some file names are long enough (I inherited them and they are descriptive) and, being somewhat Dyslexic, sometimes I screw up the name when I type it.
  
  I would like a way to copy and paste the name of the file in the active panel. My temporary solution was to open a new page, drag the asset (photo) in the page, copy and paste of code view.
  
  Does anyone have a better solution?
  
  Thank you
  
  DennyA

  Quote:
  Posted by: newsgroup user
  > temporary solution was to open a new page, drag the asset (photo)
  > on the page...

  I don't know why you do not use only the button insert an Image, then
  Navigate to the desired image.

  But why open new page and drag/cut/paste into another page? If you want
  Do drag, just drag the name of the file in the assets Panel in the place you want to
  mode page code, you want it to be in.

  Or maybe I don't understand your intention?

  I have some Javascript which permutes the photos. He already has pictures in it, so I need to change. I didn't know that you could drag an asset in code view. If I highlight the text that I want to replace, and then drag the asset to replace, I have to delete extra closing tag, which is easy.

  I have to put a slightly different file just above version of it, but if I then copy and paste the name of the file, I just inserted and change 'thumbnail' to ' 400 x 300 "(mon chemin vers differentate les fichiers) it works like a charm." "

  Thank you very much!

  DennyA

  

• Cannot copy and paste the content of an email from browser AOL9.5

  Windows 7 can not / not to highlight, or cut and paste using aol9.5 which is compatible with Windows 7. HP will not help me. Hope the forum will, like MS wants $49 to talk to me. New computer, about to come back and continue to use the old XP. Thank you.
  In an email, I can 'select all' and copy and paste, but if I want a part of this opportunity and send someone else, only 'PART' of this same mail via via cut and paste, it doesn't allow me to do.  I have included for the forum, my chat session with HP that has not helped me... He talked about IE and I'm not on IE, I use aol9.5. So thank you and hope someone can help me.  Here's the question/conversation.  Thanks for your time in advance.   Gail

  If I send you an email and then I want someone to send the same email, but with less content that what I sent you, cut and paste highlights the whole email and not just the portion I want to send to the other party. I have to use the delete button to make it work properly.  Below is the response from HP.

  [Monday, September 13, 2010 16:23]-Rajeev K says:
  I understand your concerns. In this case, I'm afraid to say because this content is available to the web browser in line, we can not able to perform the cut dough. If we need to send content limited from the particular email, in this case, you can copy paste the documents to any word in the document then right a new email and send the details according to your requirement.

  [Monday, September 13, 2010 16:23]-Gail Smaldone says:
  Hope you understand. Google says Windows 7 allow to cut and paste, and highlight the part of the sentence, it does not work.

  [Monday, September 13, 2010 16:25]-Gail Smaldone says:
  What you say makes no sense to me. I do a lot of extra work.

  [Monday, September 13, 2010 16:26]-Rajeev K says:
  Gail, the issue is not with Windows 7.

  [Monday, September 13, 2010 16:26]-Rajeev K says:
  It is because of Web browser that we use.

  [Monday, September 13, 2010 16:27]-Gail Smaldone says:
  It seems to be Windows 7, Rajeev. I can't yet highlight the cat above. The highlight will not stay up there for cut me and paste.

  [Monday, September 13, 2010 16:27]-Gail Smaldone says:
  I use aol 9.5 and sometimes internet explore. Currently, I'm on AOL9.5 which they say is compatible with Windows 7.

  [Monday, September 13, 2010 16:27]-Rajeev K says:
  Are you facing the same question with all formats?

  [Monday, September 13, 2010 16:28]-Gail Smaldone says:
  I have not tried on IE.
  [Monday, September 13, 2010 16:28]-Gail Smaldone says:
  
  I use aol 99% of the time
  [Monday, September 13, 2010 16:28]-Rajeev K says:
  Alright.

  [Monday, September 13, 2010 16:30]-Gail Smaldone says:
  What can we do to fix this, if it's not the fault of computers?

  [Monday, September 13, 2010 16:30]-Rajeev K says:
  Gail, from now on, we have no other option to change this.

  [Monday, September 13, 2010 16:31]-Gail Smaldone says:
  I can't use the computer Rajeev in this way, then.

  [Monday, September 13, 2010 16:31]-Gail Smaldone says:
  : () O

  [Monday, September 13, 2010 16:31]-Rajeev K says:
  I'm sorry for the inconvenience caused to you.

  [Monday, September 13, 2010 16:32]-Gail Smaldone says:
  You are able to talk to who it is created the Windows 7 operating system and see what can be done to make it compatible with aol9.5?

  Hi Gail,

  At this point, I suggest to launch Internet Explorer and check to see if you are able to copy and paste the content of the emails. If you are able to accomplish the task uisng Internet Explorer, it could be possible that some features of AOL9.5 do not work as expected, and you would like to get in touch with AOL, to solve the problem.

  Please visit the below mentioned link for help on AOL products:

  http://help.AOL.com/help/microsites/microsite.do

  Kind regards

  Gaurav Prakash - Microsoft Support

  
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to copy and paste the touchpad on a Toshiba portable computer Satellite C655 S5505 windows 7?

  OT:touchpad.

  Hello, can you please suggest how to copy and paste the touchpad on a Toshiba portable computer Satellite C655 S5505 windows 7.

  It worked a few days ago... I don't know what I did so that it does not work right. I like to copy and paste when right or click with the left button of the touchpad... They have a key on the Panel of key with copy and paste and cancel and cut options next to the bar area to the right of the ALT key with lines and an arrow on the key... Always like the old mode right click and copy and paste from the touchpad... Thank you

  Hello

  Check with the manufacturer of system support, documentation in line, or forums as there probably
  are shortcut keys that enable and disable the touchpad functions.

  Toshiba has also map of keys which allow easy adjustment of the TouchPad. See support for Toshiba
  and Forums. The key shortcut for the TouchPad, if they are responsible in the Fn + F9 or see the key card
  So usually loaded at the top of the screen.

  There is also usually a TouchPad control utility that loads in the Notification area next to the clock
  at the bottom right.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad
  entries) and some have a utility that loads in the Notification area next to the clock in the bottom right.

  ==========================================

  This utility also allows to control the TouchPad:

  TouchFreeze
  http://code.Google.com/p/TouchFreeze/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Copy and paste the IPTC metadata entirely

  Hello guys.

  My question is on copy and paste the full IPTC metadata from file to another file.

  How can I do?

  Thanks in advance,

  Artem

  OK guys here is the solution (batch copy all metadata with the same name as this EPS EPS to JPG):

  (1) install Exiftool

  (2) use this code:

  ExifTool - tagsfromfile %d%f.eps-all: all-overwrite_original *.jpg

• Copy and paste the highlight, shadow and exposure?

  Can you copy and paste the parameters for each clip so that there is no dramatic change in the exposure of one small clip to another?

  Thank you!

  Jon

  Hi Jon,

  Great idea, but unfortunately you can't currently do that in video. We have this on our radar!

  Apply a 'Look' to the help project give a mood meets all the clips in the project.

  Keep coming suggestions!

  Best,

  Peter Garaway

• How to copy and paste the image parameters to image with ACR 9.1.1

  How to copy and paste the image parameters to image with ACR 9.1.1

  Hi nicholast15140269

  • You can save the current settings of the image or can save them outside in the form of XMP file. Then use as a preset.

  

  • With Bridge, you can open several files in ACR settings and sync.  Editing in Adobe Camera Raw synchronize > synchronization of editing in Adobe Camera Raw

  Concerning

  ~ Assani

• How can I copy and paste the URL into the browser?

  How can I copy and paste the URL into the browser?

  Hey laquettak2368033,

  It is enough to select the URL by dragging your mouse over it & then use the keys Ctrl + C to copy & then paste it using Ctrl + V keys.

  Kind regards

  Nicos

• Copy and paste the error code

  Hello

  Apologize that I'm not really good at English, but I'll try my best to explain what has happened recently?

  This is the result when I tried to copy and paste the vector file to the same location (Illustrator to Illustrator):

  <!-generator: Adobe Illustrator 18.1.0, SVG plugin Export->

  < version svg = "1.1".

  " xmlns =" http://www.w3.org/2000/SVG "xmlns:xlink =" " http://www.w3.org/1999/xlink "" xmlns: a = " " http://ns.Adobe.com/AdobeSVGViewerExtensions/3.0/ "

  "x ="0px"y ="0px"width ="17.5px"height ="17.5px"viewBox =" "0 0 17.5 17.5 ' enable-background =" new 0 0 17.5 17.5 ".

  XML: Space = "preserve" >

  < defs >

  < / defs >

  < filling the path = "#F5F5F5" d="M14.5,17.5H3c-1.6,0-3-1.4-3-3V3c0-1.6,1.4-3,3-3h11.5c1.6,0,3,1.4,3,3v11.5C17.5,16.1,16. 1,17.5,14.5,17.5z

  "/ >".

  < / svg >

  And when I tried to paste a vector file from Photoshop CS5:

  "This is not a valid document of the file Portable Document (PDF). It cannot be opened. »

  I found a similar question reported form another user but they are from the MAC and no, I didn't install any software except CC Cleaner, but I already uninstall but the problem persists.

  No idea how I can fix? Thank you.

  Additional information:

  Illustrator CC (64 bit) V18.1.1

  Windows 7 Professional SP1

  Disable the SVG code in the Clipboard prefs.

  Mylenium

• Copy and paste the selection of images on the timeline

  I have 2 layers. Layer 1 is a background, layer 2 is a square on top of the background.

  So the first 5 frames of the layer with the square are empty in the next 5 frames the place appears and the square disappears again for 5 executives etc etc..

  The place must be in a position that has taken some time and pixel by pixel, a process that I don't want to have to repeat every time I do the square will apear again.

  When I use ctrl + c on my calendar, which places it in the correct position and paste it into the next set of images him copy in the place, but it is not in the right place? How to copy a part of the timeline by keeping all the images in place?

  If your intention is to make each set of images even then copy and paste the images, not the content of their.  Just select the images in the timeline panel and right click on them... choose copy image.  Create the new keyframe where you want to copy them on and do a right-click and choose Paste images.

• Copy and paste the position and size of two different objects

  Greetings,

  I have a question, quite a delicate. Is it possible how can I copy and paste the position and the size of two objects?

  Let's say I have a 2 circle y 5 cm x 5 cm x 2 cm and its position, I a square of size 3 x 7 cm and its position is y 0 x 0 cm.

  How can I copy and paste in one step of order / position of circles and the size squared, so I can get the square of 2 x 2 cm and 5 cm x 5 cm position?

  Something like copy + paste in place with a different logic. I hope you understand what I want.

  I now do it manually, I'm copy the size and position of one object to another [ctrl + c > ctrl + v] but it takes quiet a while,

  Thank you for your suggestions,

  concerning

  Bryan

  Which would probably need a script, then maybe ask in the respective subforum...

  Mylenium