copy calibration data
Is it possible to copy the data from claibration from VI to another or a DAQ Assistant to another? I have calibrated pressure in separate Vi sensors and now want to create a handset. While the scales are calibrations are not. However has no way to insert the calibration, short data to get a voltage generator and recreate all the tensions. Use the table across a reasonable alternative?
If you press pause within the calibration tool, you can change the input value and the reference and then validate them both, so problem solved.
Tags: NI Software
Similar Questions
-
How could a routine walk-run? Inside, Indoor walk or another run? I do this routine outdoors with Gps first so that I'm not kidding my calibration data? Help please and thank you!
Hello
Choose indoor walk or run Indoor (it does not matter which) to an indoor walk-run routine.
Even if Apple Watch does not currently offer as a workout interval training, choose one of these allows the most appropriate data sources (which are the same for market and short) to use to track your training.
If walking or running, the accelerometer is used to estimate pace and the distance (allow your arms swinging naturally) as well as the frequency heart sensor for the estimation of calories burned.
Run or walk inside will not affect your calibration data. Calibration is based on the GPS of the iPhone data and is only held during the outdoor walking training or race outdoors when the iPhone combined is taken along.
More information:
Use of the workout on your Apple Watch - Apple Support
Calibrate your Apple Watch for better accuracy of training and activity - Apple Support
-
IAM using windwos vista that I try to copy a data usb port on my pc wile file copy the cry of power dwon ofter that I can't find the fine in usb and my pc so how do I get that file back please answer me
Hello
This program allows you to search for and attempt to recover the file to your C: drive and / or your USB Flash drive.
http://www.Piriform.com/Recuva
See you soon.
-
PowerVault MD1000: Attached directly slow to copy the data from storage.
Hi all
I have a powervault MD1000 attached to a PE2900 using scsi. When I write for the PV everything is ok, but when I want to read it, for example copying the data from it, he grinds the server stops and usually falls!
can someone advice could be what the problem?
-
Easy transfer - tool cleaning or copy of data
Easy Transfer transfers blindly * / settings files. If the old PC is bloated with crapware, malware, software of garbage,... it's an effective way to transfer or I'm better to manually copy (Documents, photos, music, videos, Favorites, links, PST files,...) to avoid problems of migration for a PC to another?
Easy transfer is designed to facilitate the transfer of your DATA and settings to another computer. That works as well when you replace a hard training or re - build a system. NOTE that it does NOT copy the applications (programs). For what it's designed, it does a great job.
I use it quite often. If the settings on the computer are dirty upward and are part of the problem, or I wasn't capable of first clean malware, I won't use Easy Transfer because he repeated bad settings that may be causing the problem. In this case, do drag and drop your files to an external hard drive to backup data. Do your re - build. Install the applications you want. Then, copy your data back.
I rarely re - build a hard drive because of the infection. There are enough good tools out there, and Windows 7 is so durable it can almost always be cleaned. My favorite tool is ADWcleaner.
Usually, when I use Easy Transfer, is when the OS is so corrupt that I can't fix it or I replace a hard drive. If you are replacing a hard drive go big. 500G is a good place to be.
-
Not able to copy the data on USB in WIndows 7 even with administrative rights
I use Windows 7 64 bit and have administrator rights, I can copy data from USB but system is not allowing me to copy the data on USB. This has happened with me also, but since I change my laptop, this problem has been resolved.
It happened suddenly, earlier, I managed to copy the data to USB abd take backup of my system, but now it is not possible. Please notify.You may need to take possession of your records - see here:http://social.answers.Microsoft.com/forums/en-us/w7network/thread/24bdf172-2DBC-43b8-995d-a99b6a81413c/ -
I have some important files on my desktop and the fear that one of my employees has copied that data on its USB, is it possible to check if there was such a transfer, such as a history of copy, or something?
In my view, the above question sums up all, I'm not that computer savvy, so please give detail instructions, and if there is way to secure these files are copied or sent by electronic mail, please let me know, if I can avoid these problems in the future. Thank you.
You may not know a posteriori if this transfer took place. To prevent it in the future, lock your device by pressing the Windows key + L before you leave your office and keep your secret password.
-
Tried to copy a data file to another drive using Power2Go disc. Received message that Power2Go has stopped working any suggestions. I tried to uninsall the CyberLink program and reinstall from Recovery manager. I have a HP with Windows 7 Home Edition computer.
Hello
1. were you able to burn the disc before using this software?
2. you remember to make changes to the computer before this problem?
3. are you able to burn the disc using Windows Media Player?
Look for error messages in the event viewer for detailed error information.
Open event viewer
http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer
What are the information contained in the logs of the event (Event Viewer)?
http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
Follow these methods.
Method 1: Check to see if you can burn the disc using Windows Explorer
Burn a CD or DVD in Windows Explorer
http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer
Method 2: You can perform a clean boot that allows to check if other services third party is causing a problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Please note: after troubleshooting, make sure you start the computer to a normal startup mode. -
For example, I would like to take our entry scenario Plan for FY16 and copy this data into our Long Range Planning scenario in the years 2016,2017,2018,2019,2020.
So I know I can do this script calc to copy a year but what can do to copy several years if possible
ESS_LOCALE English_UnitedStates.Latin1@Binary
UPDATECALC OFF SET;
SET CLEARUPDATESTATUS AFTER;
Fix (& PlanYr)ClearData "LRP Input;
DATACOPY "Entry Plan" to THE "LRP Input;
"Entry plan";
ENDFIXYes--but with several instructions DATACOPY (one for each year of the 'target').
You can always make your CLEARDATA in a FIX on every year, but then put the DATACOPYs after the ENDFIX.
-
Copy the data in the column of table 1->; table2
Hello I have a table like in this example:
Table1:
Notes ID 1 This is a short string 2 It is a text. 3 Test string Table2
ID cust_id comment 1 2 2 3 3 1 Now I want to copy the data from the 'notes' column in table2 in the "comment" column
table2 cust_id references ID in table1.
I have already tried:
Update table2
Set table2.comment = table1.notes
from table2
inner join table1 on
table2.cust_id = table1.ID;
But it does not work. I get an error.
What is the correct instruction for her?
Thanks for any advice.
UPDATE TABLE2
SET HOW = (SELECT NOTES FROM TABLE1
WHERE TABLE1.ID = TABLE2.ID)
WHERE EXISTS (SELECT 1 FROM TABLE1
WHERE TABLE1.ID = TABLE2.ID);
-
Copy a data file to a local diskgroup remotely a diskgroup
Hi all
RDBMS...: 11.2.0.4 (64-bit)
Then...: CentOS 6.4 (64-bit)
I do a few tests here with transportable tablespaces, and I got stuck in how to copy data directly from a local DG to DG distance in another server. I'm trying to do to make the time as low as possible (I could copy the data file of my DG of a system of local files and after that via asmcmd cp, copy this data file, through cp, for the remote server, but it might take a while with giant data files).
The question is: is it possible to copy a data file to a local DG to a distance DG (another server) directly?
Thanks for the attention.
Hello
Yes
You can copy the DG to DG by using ftp.
http://emrebaransel.blogspot.com.tr/2010/04/transferring-Oracle-files-between.html
Concerning
-
Copy of data in Hyperion Planning time consuming
Hi all
Hello.
I use copy of data in hyperion planning (11 1 2 2) to copy from one scenario to another selection account annotations and supporting details.
The essbase copy of the completed data (checked sessions) part, but when I checked the console work in planning, he said: treatment for more than 2 hours.
My planning java heap size is 1.5 GB and the backup database is SQL server
My suspicion is that the issue was with sql backend. but I have no where to start.
anyone can guide me please.It get connected in the HSP_JOB_STATUS table. I think that it disappears once you restart Planning.
-
Copy the data from USB key for comments
Dear all
How can I put a USB and copy some data and programs from other PC to a guest VMS on ESX 3.5?
You can also buy USB hubs attached ethernet. With these, install you an agent on the virtual machine and she moved the USB stick as if it was connected directly to the virtual machine.
See:
AnywhereUSB
Belkin network USB hub
http://gadgets.fosfor.se/Belkin-network-USB-hub
http://reviews.CNET.com/networking-and-Wi-Fi/Belkin-network-USB-hub/4505-3243_7-32467513.html
-
XTTS - problem by copying the data file in ASM
I test the migration of database from AIX to Linux using the cross-platform transportable tablespaces.
DB version: source: 10.2.0.4
Destination: 10.2.0.5
OS version: source: AIX6.1 - AIX - Based Systems (64-bit)
Destination: RedHat Linux - Linux x 86 64-bit
I have run the commands before copying the file data to destination below.
/DataImport is a shared file system mounted on Linux server and am able to see the file of data out there. But receive the error below to try to copy the data file on the linux server. Could someone let me know if I missed something / how to fix this error.EXECUTE DBMS_TTS.TRANSPORT_SET_CHECK('TBLSP1,TBLSP2', TRUE); SELECT * FROM TRANSPORT_SET_VIOLATIONS; no rows selected alter system archive log current; alter tablespace TBLSP1 read only; alter tablespace TBLSP2 read only; expdp DUMPFILE=xtts_exp.dmp DIRECTORY=DUMP_DIR logfile=xtts_exp.log TRANSPORT_TABLESPACES=TBLSP1,TBLSP2 CONVERT TABLESPACE TBLSP1,TBLSP2 TO PLATFORM 'Linux x86 64-bit' FORMAT '/dataimport/%U';
$rman target / RMAN> copy datafile '/dataimport/data_D-DBMGRT_I-3320277811_TS-TBLSP1_FNO-26_05m8miia' to '+DATA'; Starting backup at 05-APR-11 using channel ORA_DISK_1 RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-03002: failure of backup command at 04/05/2011 10:19:44 RMAN-20201: datafile not found in the recovery catalog RMAN-06010: error while looking up datafile: /dataimport/data_D-DBMGRT_I-3320277811_TS-TBLSP1_FNO-26_05m8miia
To be honest, I don't really see what you have done in the op, so I can't really comment on. I see you have an export of the TTS, but that's all.
If you have followed all the list I mentioned (you did write the TTS reading?), then you can try to save the file with RMAN, but I suspect that it does not work. Do you get the error even if you move the shared location (/ donneesimporter) to a local directory on the target area? Maybe he doesn't like the fact that it's a NFS mount (or whatever the proportion is).
Or maybe it's because you going to 10.2.0.4 10.2.0.5. I have always had the same group of patches and updated once I had plugged the tablespaces on the target database.
-
Copy the data from CollaborateSync to the other pc
Because Acrobat crashes sometimes, I would like to copy the data from CollaborateSync to a PC Backup. This means that I have shared a pdf with PC A one form I'd like to get answers on the PC B, too.
I tried to copy the Synchronizer-folder "documents and settings" - folder but I can't get answers.
What information should I copy can I geht PC B answers?
Klaus
Find the file "Workflows" in Acrobat under Documents and Settings folder. It is located inside the folder "Collab. If this file is missing, copy the folder "Synchronizer" will not do anything good.
In addition, copy "Forms" folder as well.
Maybe you are looking for
-
Emails sent via Thunderbird are not saved on the e-mail server.
I have a critical problem with the backup of the emails I sent to Thunderbird. The application works very well, that everyone sent mail is correctly saved in the folder "sent" located in the e-mail account of TB.The problem is that messages are not s
-
This only happens with Firefox. IE works fine
-
I have a desktop HP Pavilion a1400e with printer all-in-one HP PSC 1410, scanner. I use the HP Solution Center to scan. I have now the message "No device detected HP" with the HP Solution Center. I can still print documents (without using the HP
-
have w 120 GB HD on 60 GB free DVD have 32 and 64, as well as 2 DVDs with Office 2007 Ultimate. Could save the address book and all the other files, I want to keep and remove up to a 32-bit skeleton and then install a 64 bit os nude and would only be
-
Bluescreens and hal.dll
I get frequent bluescreens for months. Sometimes two or three a day. Recently, I reformatted my computer and reinstalled Windows, which did not help in the slightest. They occur at any time, is not serious if I am playing games or if the computer