copy cell support in numbers

Similar Questions

• How a copy cell text, supporting details and attachments from a Version to another Member?

  How a copy cell text, supporting details and attachments from a Version to another Member?

  There was a Hyperion Planning 11.1.1.3 copied cell text utility, supporting details and attachments from one (job) Version to another Version (for example Final).  At the time where we ran, data erased!

  The old version (11.1.1.3's) Administration, management, copy data doesn't copy the text in the cell, supporting details and attachments from one Version to another Version. Latest version 11.1.2.4 copy these textual data?

  Thank you.

  
  

  Yes, in 11.1.2.4 data copy copy 'annotations to account', 'support detail' and 'text in the cell. Read below for what copy can do and can't do.

  http://docs.Oracle.com/CD/E57185_01/EPM.1112/planning_admin.PDF

  Copy of data

  You can copy plans of one dimensional intersection to another, including relational data and supporting details. For example, you can copy Final of Budget, FY10, FY11, forecast, first draft.

  Notes:

  l parameters to copy selected data are kept for the current session only.

  members of dimension l copied must be present in the selected plan types.

  the data must be copied in the cells that can accept data. For example, you can not copy data in read-only or dynamic of cells.

  l , you can copy annotations of account, to support in detail and text in cells. You can't copy annotations unit planning.

  l you cannot use this feature with attributes, selecting the attributes to copy.

  data l Essbase is copied regardless of selections for the copy of data Options.

  l because it is an administrative function, planning means that you have full access to the data you are copying. You cannot copy in the planning units that are approved.

  l this feature does not calculate data. To perform calculations, including the increase in the forecast of 5%, apply the business rule after you have copied the data.

  l to copy the data to succeed, you must select at least one Member for dimensions scenario, account, entity, period, and Version.

• How to copy contacts to the numbers

  I use OS X El Capitan and unabl to copy contacts to the numbers that I have already with just drag and drop. Can therefore anymor?

  Yes - I tried. OS X 10.11.6. 3.6.2 numbers; Contacts 9.0

• Copy of supporting detail from Excel

  We are upgrading a Hyperion Planning 11.1.1.3 to 11.1.2.3 and have encountered a problem with the support of detailed.  When you try to copy more cells of data from Excel in the window of supporting details (web access), all the data is copied into a single cell.  In the previous version, the data would be copy across different cells as it existed in Excel.  The documentation has not changed, leading me to believe that this is a bug or miss me a setting somewhere.  Has anyone encountered this problem?

  Specifically, I am on version 11.1.2.3.500.17

  Any help is appreciated.

  As to apply it by you, it is actually a bug in code, see the reference bug # "" 17897098: RETAIL SUPPORT COPY/PASTE FROM EXCEL doesn't WORK IN WEB "»

  This set to be fixed in version 11.1.2.4.000 planning & later.

  HTH

  Nauzer-

• Transfer of calls to telephone numbers in different cells of 2 numbers online

  I have 2 numbers online and I want figures online transmitted calls to 2 different cell phone numbers when I am not connected to Skype. Is this possible?

  Currently, it is not possible since the call is transferred from the Skype account, rather than directly from the number online.
  
  This option would be to create several accounts and buy separate number for each

  If the answer was helpful, please mark with congratulations , and if the problem is resolved you can mark it with solution. This will help other users found this answer more easily. Thanks in advance!

• open copy vs ios spreadsheet numbers App

  I have set up several excellent spreadsheet to transfer in the iOS app via iTunes numbers.  Numbers gives no option to "open" the files, if their file type is of numbers or Excel.  But... I can "copy".

  Is 'copy' the newly darkened Word for 'open' in the application?  for example, to 'copy' a spreadsheet to open it?

  Hi Donot,

  'copy' is what you will do. When you keep the files in icloud you would open the file and it would keep synchronized on your devices. I like to keep my local worksheets so I'm back copy with iTunes. When I want to send a file back to my Mac, I have replace the file in iTunes and then save it from there on my Mac, by overwriting the file there. Changes on the Mac loaded into iTunes, overwrite the file and before that I have copied to iOS I delete the original or I'll have numbers and Document numbers Document 2 on the iPod. A little complicated but the price you pay to waive the 'transparent' iCloud experience.

  Quinn

• Add links to multiple cells by the numbers

  Hi good people-

  I'm looking for a way to add hyperlinks to a list of data in a spreadsheet numbers.

  http://streeteasy.com/sale/1135961

  http://streeteasy.com/sale/1095956

  http://streeteasy.com/closing/10303678

  http://streeteasy.com/closing/10324826

  http://streeteasy.com/closing/10327274

  http://streeteasy.com/rental/1343935

  http://streeteasy.com/sale/1159172

  http://streeteasy.com/sale/1158912

  I copied and pasted the section of the sheet as an example - but I use spreadsheets like this a lot and they never show up as hyperlinked.  I've found a workaround - which is to copy and paste the links into an email in Mac mail - convert it to plain text and then email it back to myself.  It comes back with the links inserted (

  ( http://streeteasy.com/sale/1202317)

  , so I then copy and paste from the email back into the spreadsheet.  There has got to be a better way.... Anyone know of one?

  Thank you

  Select the text, and make the order K.  It is found also in the Format menu.

• 9237 with deck full load cell: support cell_null_off_shuntcal.vi survey error 200077

  Normal
  0

  fake
  fake
  fake

  EN-US
  X NONE
  X NONE

  / * Style definitions * /.
  table. MsoNormalTable
  {mso-style-name: "Table Normal";}
  MSO-knew-rowband-size: 0;
  MSO-knew-colband-size: 0;
  MSO-style - noshow:yes;
  MSO-style-priority: 99;
  MSO-style - qformat:yes;
  "mso-style-parent:" ";" "
  MSO-padding-alt: 0 cm 0 cm 5.4pt 5.4pt;
  MSO-para-margin-top: 0 cm;
  MSO-para-margin-right: 0 cm;
  MSO-para-margin-bottom: 10.0pt;
  MSO-para-margin-left: 0 cm;
  line-height: 115%;
  MSO-pagination: widow-orphan;
  font-size: 11.0pt;
  font family: 'Calibri', 'sans-serif ';
  MSO-ascii-font-family: Calibri;
  MSO-ascii-theme-make: minor-latin;
  MSO-hansi-font-family: Calibri;
  MSO-hansi-theme-make: minor-latin ;}

  Hello

  I'm trying to use the example
  load_cell_null_off_shuntcal.VI with a scale of full-bridge (Honeywell
  Model 31, not amplified). I'm using LabView 8.6, cDAQ-9172 and NI9237. The
  load cell is connected to the pins 2,3,6 and 7.

  Entries for the front side of the VI
  are: excitation10V internal; mV/V 2.1492 (calibration sheet); weight max 10
  lbs; resistance bridge 350 ohms (Honeywell specifications); 9237 shunt internal
  100 kohm resistance; map of shunt R4 (default setting). I chose
  "Do not offset null" and "shunt cal.

  This is the error I get:

  Error-200077 occurred at DAQmx
  Do a calibration Shunt (bridge) .vi:1 or the possible reasons:

  Measurements: Requested value is not
  support for this property value.

  Property:
  AI. Bridge.ShuntCal.GainAdjust

  You asked:-61.980405e3

  Valid values begin with: 500.0e - 3

  Valid values ending with: 1.500000

  If the "shunt cal.
  green button is not selected, there is no error. I understand that the Gain
  Change value should be approximately 1, whereas I get is much larger. The Subvi DAQmx PerformShuntCalibration
  .VI (bridge) contains a "Call library function node" which I did not
  find out how interrogate.

  Someone else has experience
  with this error? Do you have any advice on:

  1)
  How to 'see' the calculations being
  carried out inside the "call library function node"?

  2)
  What the correct shunt element
  a full-bridge load cell location is? (although changing this location only)
  does not eliminate the error, I can't find this info).

  3)
  What can I do wrong with
  my entries to cause this error?

  Thank you

  Claire.

  Hi Claire,

  You must physically connect the SC of arm of the bridge terminals (normally R3). The terminal is not provided for the connection of external resistors.

  See the example

  C:\Program NIUninstaller Instruments\LabVIEW 8.6\examples\DAQmx\Analog In\Measure Strain.llb\Cont Acq strain samples (with calibration) - OR 9237.vi

• POS 5.5 - copy network support?

  Hello

  I have worked recently with 5.5 POS and have questions about the methods of backup - I know what the typical method for backup, the VDP hot-add device the VMDK from the source of backup of the device and performs disk copy, but was wondering if there is if rescue network-copy the hot add is not possible.

  If network copy is actually supported, is there a way to force this as the main method of backup?

  Thank you!

  D.

  Fallback to NBD (Network Block Device) in terms of your network-copy is the default if the hot add cannot be engaged. But you can't force it is a primary backup method. As a workaround, you can have your VM not shared to deployed POS host data warehouses. That way the hot add cannot be engaged and NBD failover is possible.

• I have a client who always uses 3.0 and I need to get a copy to support. where to go?

  I have a client who is not allowed to be upgraded because of their company policies. They met a section of javascript code that is not supported and I need to install 3.0 in order to find a solution for them.

  Where can I download Firefox 3.0?

  Do a custom installation and install each version in its own folder in program using several versions of Firefox.

  • https://support.Mozilla.com/kb/custom+installation+of+Firefox+on+Windows

  Create a new profile exclusively for each version of Firefox.
  Create a shortcut on the desktop with Pei 'profile' attached to the target to launch each version of Firefox with its own profile.

  See these articles for more information mozillaZine KB:

  • http://KB.mozillazine.org/Using_multiple_profiles_-_Firefox
  • http://KB.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile
  • FTP://FTP.Mozilla.org/pub/Firefox/releases/
  • FTP://FTP.Mozilla.org/pub/Firefox/releases/latest-3.0/

• Conditional highlighting with checkbox in the two cells by the numbers

  I have two columns.

  Check boxes, the other contains text.

  I want to apply formatting conditional for text, based on the checkbox (true/false) value.

  Hi Bebaj,

  Add another column (C in this example). You can hide C when everything works.

  

  Formula in C2 (fill down)

  = IF(A2,B2,"")

  A tick in a check box inserts the value of B in C, another "" (NULL)

  Conditional highlighting in column B

  

  Kind regards

  Ian.

• Copy the text of the planning cell and the supporting details

  Hello
  
  I need copy the supporting details and the text in the cell of a scenario to one another without copying the data.
  
  Is it possible to do outside the "Administration-> copy data" option in planning?
  
  Is it possible by accessing repository tables? If so someone please tell me the names of the tables in the repository where this information is stored?
  
  Thanks in advance...

  Hello

  What version you are, if it's 11 then you can try using lcm.
  It can be done with SQL queries, but it can be a bit messy, have a read of this [post | http://forums.oracle.com/forums/thread.jspa?messageID=3300400] it should help you if you want to go this route.

  Ok?

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Several numbers of cell for the same person

  Is it possible to store multiple numbers of cell for the same person in my contacts? For example: I have a contact with two phone numbers, these are all cell phones, but in the contacts that they marked as the default cell and home numbers. When I am trying to change home to cell number and record this is not registered. It is always the cell and home numbers. So my question is: how to change all the numbers to cell Type?

  When you change the contact, press the label, scroll and choose custom label. You can't have two identical labels, but you can have labels custom as mobile2, mobile3, etc.

• How to find how many times, how many numbers in a range of numbers (number of lines and columns) has been repeated (numbers 3.6.2)

  Hello

  I have a range of numbers from B2 - B11 until the G2 - G11. For example:

  31	7	28	10	4	17
  20	13	44	2	1	39
  32	45	39	4	10	25
  26	38	27	43	12	3
  42	35	37	1	34	21
  13	39	11	14	5	37
  21	33	34	4	13	10
  31	14	1	24	35	3
  20	2	24	27	22	30
  10	34	36	32	3	27

  I would like to know who among these numbers have occurred and how many times. For example (just to have as an example): number 10 repetitions 5 times, number 13 repeated 3 times, 24 repetitions 9 times.

  Repeats = duplicates.

  I want to know all the repetitive number and how many times they repeat.

  Is there some kind of formula I can use to get there. It would be good to have the sorted result. For example:

  32 repeats 10 times

  24 repeat 9 times

  6 reps 8 times

  5 repeat 7 times

  22. repeat 6 times

  10 repeats 5 times and so on.

  Hello

  Problem of three steps:

  1. Determine the distinct values
  2. Count the number of times each appears in the table
  3. Sort by value or frequency (or both).

  The first step is easily handled by copy separate Automator Service, a Service of Automator, written by SGIII. A link to the file in post June 21 of the SG in this thread: Re: Analyzing column (maybe not the correct wording)

  After downloading and installing the service, select the cells containing the numbers, call the service, and then select the first regular (ie. non-header) cell to a new table and the dough.

  (The following assumes the new table has a header row, no column header, and you have selected - click - cell A2 before pasting.)

  You will get a list of distinct numbers in a single column (A2 - A34, of your sample and support of note).

  To count the numbers:

  In this example, the existing table is named 'Table 1'

  Enter the following formula in B2 the new table, and then fill up to the last line of the column B:

  = COUNTIF (Table 1::B:G, A)

  Results should be as shown:

  

  Sort the results on column (value) or B (frequency)

  Two types (A, then B) will be put in order of frequency, with values appear the same number of times sorted by value within this group.

  Kind regards

  Barry

• text of numbers of pages (without formatting) or rtf

  I have a very full list of items in two columns that I would like to move to a page or a rtf document.

  I took the colours of the cell and the contours and seem to have been able to paste it into a rtf document that seems to behave a document strictly text (no cell spreadsheet in there). However, when I try to do it in the pages of so I can insert to start a new page, so I can format the document, it seems that it behaves like a numbers copied cell / worksheet.

  is it possible to convert it into a text document?

  None of these options export number seemed to do the trick.

  Thank you

  If all else fails, I often have to paste something I want as plain text in a new document TestEdit. BEFORE gluing make sure that it is really clear and not Rich Text... Look at drop-down menu Format and if you see make plain text, then select that... If you see doing Rich Text, then it is sure to stick. ALL formatting must go.