copy data from one comprehensive database to another in the same windows server

Hi all

We intend to migrate or copy the complete data of a database which is in 11.2.0.1.0 enterprise edition for 11.2.0.1.0 in the standard edition.

Two oracle homes are even windows Server.

According to my knowledge, we can do this:

1. create a database in 11.2.0.1.0 in standard edition and migrate by datapump

2 tablespaces transportable datapump option.

3 Rman cloning.

Is it possible to lower the db in 11.2.0.1.0 enterprise edition in a uniform State... copy the file pfile, backup of the controlfile, data files and paste in 11.2.0.1.0 in the standard edition home... After you re-create the control file and db startup?

You cannot clone a database of EE in a self a.

The only option you have is option 1.

Refer to support note 465189.1 if you want more details

Tags: Database

Similar Questions

  • How to copy data from one hard drive to another after the upgrade?

    I have a HP e9220y, and I recently bought a new hard drive for it. There is nothing wrong with the former, but this one has a 64 MB cache and 7200 RPM so I hope it will be a little faster. I installed it and it works fine, but I want to copy all data from the old disk to the new so I can start everything off the faster hard drive and I seem to have a bit of doing wrong. I can't just copy and paste because of the Windows system files that are used. And last night when I set up Windows backup, and went to bed, when I thought it that Windows has recovered from a stop unexpected, rebooted, and only 2 GB of data saved obtained.

    What is the best way to move all the data from the old drive to the new drive, make it the default C: drive and move partitions system and factory_image as well? Thank you!

    Please read this link to another post made by Big_Dave and myself

    http://h30434.www3.HP.com/T5/desktop-hardware/hard-drive-imminent-failure-problem/TD-p/438567

    (1) If your old drive and the new drive is Seagate or Western Digital, then free House with their cloning software.

    (2) before starting the clone process, I found best to perform a disk cleanup and defragmentation.

    Cloning software to copy the two partitions. Example:

    Old drive 250 GB formatted to 232 C: created 220 and 12 GB D:

    New 1000GO drive formatted to 931 GB created 919 GB C: and D: to 12 GB

    The "Seagate disc Wizard" cloning software will let create you a clone automatic or manual partition resizing.

    The two modes to offer an overview of the actions before commit you. The manual on this page of Seagate (PDF) is 68 pages.

    After the cloning process he complete, all you have to do is swap on the disks. Besure to connect your new disc on the original motherboard SATA port.

  • copy data from one database to another

    Hello

    I want to copy data from one database to another.

    I have two patterns such as

    dev1/dev@ORCL
    DEV2/dev@DCEL


    I have same tables dev1 and dev2 (tables)
    but I have not given in dev2 (tables).
    now, I want to copy dev1 (tables) in dev2 (tables).

    You can also use the database link:

    select * from dev1.emp@orcl;
    

    What database are you connected to?
    You must create and use the links in the database for all other databases.

    For example if you are connected to the database A and to retrieve data from database B, you must create a connection of database in base B

    create database link B connect to  identified by  using 'B';
    

    Then you can retrieve data from database B with

    select * from [yourschema.]yourtable@B;
    

    This will work only for tables that are visible to the user that you used in the definition of database link.

    Published by: hm on 10.08.2011 22:15

  • Copy data from one schema to another. Reopen the Question

    Hello

    I had asked this question earlier to copy data from tables of one schema to another in the same database using the database link. In my previous post have mentioned below.
    Re: copy data from one schema to another.
    Now I am faced with the question for the remote copy of database

    I have created a DB connection between my local system and the remote database. with the chain of connection as shown below
    CREATE THE DATABASE PUBLIC LINK "MERU_DEV_LOCAL_DEV".
    CONNECT TO MERUDEV IDENTIFIED BY MERUDEV WITH THE HELP OF "MERUPROD";
    In the above script
    LOCAL DEVELOPMENT scheme IS
    REMOTE schema is MERUDEV
    I try to copy remote database to my local database tables using the script below.
    network_link DEVELOPMENT impdp = schema MERU_DEV_LOCAL_DEV = MERUDEV remap_schema = MERUDEV:DEVELOPMENT TABLE_EXISTS_ACTION = REPLACE
    But the copy of the table does not occur. What could be the problem? Please suggest me or do I need to modify the script

    Thank you
    Sudhir

    You can:
    -monitor the BONE with ps - ef
    -monitor data pump: jobs are dba_datapump_jobs and dba_datapump_sessions
    -monitor with logops: v$ session_longops

  • Copy data from one table to the new table

    Hello

    I copy data from columns of a table to another table and my query is
    INSERT INTO TestTable (empno, empName, deptno)
    SELECT empno, empname, deptno
    WCP

    and it works fine but I want to insert a data column in testTable based on emp.deptno
    as if emp.deptno = 10 it will add 1 to the testtable.class column,
    If emp.deptno = 20 it will add 2-column testtable.class,
    If deptno = 30 it will add 3 to the testtable.class column,


    TestTable structure is
    EMPNO NUMBER (20)
    ENAME VARCHAR2 (50)
    DEPTNO NUMBER (20)
    CLASS NUMBER (20)

    Can someone please help me write this procedure.
    Thank you

    You can use a case statement as

    INSERT INTO TestTable (empno, empName,deptno,class_column )
    SELECT empno, empname,deptno, case when emp.deptno=10  then 1
                                       when emp.deptno=20  then 2
                                       when emp.deptno=30  then 3
                                  end
    FROM emp
    

    See you soon
    Katia

  • Composite planning form, copy data from one tab to the other?

    This is something I've heard of someone who did but have not actually seen. The requirement is to copy data from an existing entity to a new entity as a means of values seedlings early in the budget cycle. I was thinking about a form of 'source' and a form of 'target' within a composite shape. A calc would make a copy. After copying the Scheduler can manually adjust values, or type values in the accounts that the source had no data.

    If someone did please let me know how you did and what looked like the calc.

    Thank you!

    FA

    Hello

    Yes, this can be done in several ways. The calc script would be similar to what is mentioned above. But in regards to the copy, you can also create a menu on the source form set a rule of company on the menu and start the copy that also offer users the ability to choose several invited outside of the entity if necessary.

    Thank you

  • How to transfer data from one hard drive to another?

    I don't know how and has been upgraded to a new hard drive...

    Hello

    Well, it may be quite simple, if you install the new OS in the new drive.

    Then you connect the older HARD drive, and you should be able to explore the contents of the HARD drive in windows and copy the data from the old disk to the new. Be careful with what is selected in the BIOS startup disk.

    But depends on the unit you have, because you might end up having several types of questions.

    You can also use any kind of external card, depends on the type of connection of HARD drive you have and for example, if its SATA, you can simply use a SATA to USB adapter.

    Let me know if this helped.

    Thank you

  • Datacopy do not copy data from one to the other in a sparse dimension.

    Hi I m using the following script data copy of Act scenario to the scenario Fcst1, but I can't recover the data after it's done. I understand that datacopy should new blocks if necessary to copy new data. Is - this datacapy cannot copy data if there is Fcst1 blocks already created for this intersection?

    Please help, I don't have any ideas to the left, I can't make a datacopy!

    ESS_LOCALE English_UnitedStates.Latin1@Binary
    UPDATECALC OFF SET;
    SET MSG SUMMARY;
    SET CLEARUPDATESTATUS AFTER;
    SET CALCPARALLEL 3;


    SET CREATENONMISSINGBLK


    Fix (@relative("Income_Statement",0),
    "FY09",.
    @Relative("Q1",0),
    'Local_Cur', 'USD')

    / * Copy the forecast data of the forecasts for the month - Jan, Feb and March Act * /.

    ClearData "Fcst1";

    DATACOPY 'Act' to 'Fcst1 ';

    ENDFIX

    CREATENONMISSINGBLK OFF SET;

    Yes, DATACOPY does not support dynamically calculated members. It's a pain.

    Without changing your code too, could do you:
    DATACOPY ActChild1 to TransCanada.
    DATACOPY ActChild1 to TransCanada.

    ↑ This will take care of creating block.

    Then:
    FCST = ActChild1 + ActChild2;

    ^ This should work without the parameter CREATENONMISSINGBLK DEFINED as two DATACOPY instructions will take care of that.

    Kind regards

    Cameron Lackpour

  • Copy data from one column to another column in the form of customization

    Hi all

    I need, it's that I need to copy the value of a column to another column.

    But the two columns are different from the TAB

    Who be used, please send me the code.

    Thank you

    And can you describe your condition more clearly?

    My question was... you try to copy the incident followed summary on behalf of the task? In this case, you will need to find the event that triggers ONCE you have entered your resume. Enter in the preview, select display custom events and see what events are triggered. These are the 'moments' that you can use to add additional programming.

  • Copy data from one schema to another.

    Hello

    I have two patterns in my database named as DEV AND PROD, I need to copy the PROD schema to the schema DEV, please suggest me a better way to do it I'll be often clean the DEV and copy the PROD DEV schema schema.

    If please suggest me how to clean and copy also is an option to replace it please let me know this option as well.


    Thank you
    Sudhir

    Sudhir_Meru wrote:
    Thank you very much. I really appreciate your help for me. This works even if I get the message saying impdb.exe does not work as a popup.

    I checked the date of its working for me fine.

    Windows bug.

    This script will copy only the tables that are not out? If the output table it does not copy the data?
    For example > EMP table is DEVELOPMENT exist BUT without data, in this case it does not copy the data.

    IF EMP table does not exist, it will create the table and copy the data.

    If the table exists, then DP he falls and created again with the structure and data.
    If not - only creates

  • copy data from one form to another form filed

    Hi all
    I have the main form and in the main form, I created a trigger when button pressed button, I want to open another form using open_form ("change of name");
    and in the opening form I id, code, name, and other fields, now I want to copy the name to the name of the main form and also I want to copy the code in the main form code? Please help me out.thanks in advance


    Sarah

    Try something like this, call-trigger:

    begin
    default_value ( null, 'global.name' );
    default_value ( null, 'global.code' );
    open_form ( 'form' );
    if
      name_in ( 'global.name' ) is not null
    then
      :your_block.name := :global.name;
    end if;
    if
      name_in ( 'global.code' ) is not null
    then
      :your_block.code := :global.code;
    end if;
    erase ( 'global.name' );
    erase ( 'global.code' );
    end;
    

    The called form you decide when you want to take the return values by requesting the form.
    Peut a when button pressed trigger:

    begin
    :global.name := :your_block.name;
    :global.code := :your_block.code;
    end;
    
  • How can I copy data from one catalog to another catalog?

    Question says it all.

    "Export as catalog", then "import an another catalog.

  • Copy data from one to the other members of the siblings

    I have the hierarchy of entities such as:

    1234-abc-777

    -1234-abc-777-a11

    -1234-abc-777-b12

    -1234-abc-777-c15

    and I have to copy the benefit rate which present in 1234-abc - 777-> usd - > real-> 1234-abc-777 children final. I can't hard-code as I haved this type of hierarchy of 30.

    Is it possible to use any function to get 1234-abc-777-a11. I tried to use the function @Match dim crosswise but I receive the error message when running the script.

    Note:-a11 is common in any other hierarchy 30.

    Hello

    Glenn, I agree that it will create blocks that are not required if you use the DATACOPY approach. But it may be advantageous to have your rate to the level that you are calculating the data (but only for valid data of block combinations)

    The way I approach this kind of requirement is using this three-step process. I have a previous post where I posted a detailed script.

    1. set on RELATIVE("Entity",0), but delete the entities holding rates, in this case use a UDA called RATE_INPUT for example and assign to entities where you enter the rate.

    Then using calc dense 'rate' = #missing to clear the old values from rates against all entities not RATE_INPUT

    2 aggregate rate to the entity above, where the rate is entered. This will mean that the entity kinship is equal to the entity that has RATE_INPUT uda

    3. FIX on RELATIVE("Entity",0) but remove the entities holding rates

    Then using calc dense 'rate' = @PARENTVAL (Entity) to enter the tax rate of the parent.

    The advantage of this method is to push a rate only to entities that already have an existing block. So not more your database or the number of blocks

    Thank you

    Anthony

  • How to copy data from a pdf form to another?

    Hello

    I created a pdf file, it adds form data. Recorded data of the form as a file fdf - all good.

    I've updated the document saved as a new pdf and want to load the fdf inside data.

    So I select Tools - forms - more brush options and press the "import" function - it goes gray and nothing happens.

    If I re - open the document, import remains greyed out feature.

    I can't find any way to import these data... ideas?

    I tried to go in form editing mode - add a new field.  The import option is is more greyed out so I click on it and select the open hit fdf file... the dialog disappears and nothing happens.

    Is my Acrobat XI improperly installed 11.0.07 - or what?

    Actually - I think I sort of solved the problem.  I issued the pdf as a standard "PDF:X 4/2010" (instead of none)-compatibility as 'Acrobat 7 (PDF 1.6)' and even if the button import didn't always nothing except gray is present, I found that if I went to the old document, put highlight all fields, I managed to copy and paste into the new document.

    I did try copy and paste before, but probably the pdf must be created in one of the standards for import to work... sort of.

  • Copy photos from one project (book) to another

    I have created a project (book), but I'd like to see what it looks like with a different format.  So, I chose a new project but can't seem to find a way to copy the photos from the first to the second.  I can select all the photos in the first draft (placed Photos), but can't seem to find a way to copy in the second project.  Alternatively, the second project (book), I can choose "Add Photos" but he takes me to the main page of the Photo and can not find a way to have access to the first book.  No idea how to copy all the Photos of the Place of book 1 book 2?

    Two ways

    single - double employment with the book (select it and press command - d) and then change the theme of the copy

    or show the side bar (View menu--> see sidebar), create a new book, select the old book and all select and drag to the new book thr project

    LN

Maybe you are looking for

  • GPS inaccurate location - iPhone 6

    Hi all In recent weeks I had problems with the GPS on my iPhone 6.  It seems to start when my carrier Verizon sent their last updated of the carrier.  By coincidence, it was just before the latest iOS update to 9.2.1. I had problems immediately after

  • HP remote

    I was wondering if thiers any prgogram that plays all media and works with the remote hp I know windows media center dose units but it dosent play mp4s and downloaded files viedo so them is i tunes but it dosent play avi files so I need one that will

  • Where can I find a rotary switch 6 positions in Multisim

    I'll try to find a rotary switch 6 position in Multisim and I can't locate it.

  • Generic host Win32 - it keeps poping up and then I lose access to what it is connected to all Windows

    Generic host Win32 - it keeps poping up, then I lose access to all thing of all relative to windows and my internet is so slow that *. is the genric host win32 popup a virus that I tried everything and it still happens! I have windows xp sp2. any1 ca

  • Offline on Officejet J6480

    I have dignost but it still says "offline". Please help me It's a really hard job for me... For two days, I am struggling with this...