Copy default tray in mode selection

I have a HP OfficeJet Pro 8600 Premium with two paper trays.  Everything works well when the printing directions are sent to any one of my three computers.  The default tray (tray 2) has my paper supply Tray 1 has envelopes.  It is a great system when I print letters and envelopes using MS Word.  However, when I want to copy anything, the printer selects Tray 1, even if I named him tray 2 as the default tray on computers and printers.  Can someone tell me what I should do to get the printer to use tray 2 when I'm in the copy mode?  So far I've been switching the two plates when I copy something, but it's a big pain in the back.  I tried the reprogramming of the printer, but without success.  Help!

on the 8600 copy has its own Board of adjustment. Just tap the arrow pointing downwards in the menu copy and you will see the selection of the status bar, the parameter should be sticky.

Tags: HP Printers

Similar Questions

  • officepro 8600 more do not select the default tray paper

    Second paper tray added OfficePro 8600 more.   Printer recognizes second tray to tray 2.  Changed to render settings of the printer tray default 2.

    Funtion copy to printer takes only of the plateau which had envelopes.

    Browsers (Fire Fox) also print only from the Board one, what is envelopes.

    Settings in Microsoft Office implemented so that Word prints correctly.

    How can I tell the printer to select tray 2 paper letter?

    Thank you.

    I see that you are having problems with the 2nd set, this can be confusing. You will need to go into the actual printer settings and change TRAY 2 as default. On the touch screen, select:

    1. click on the configuration Menu
    2. click on Preferences
    3. default tray
    4. Select tray 2

    After selecting this option, and then try to print and see how it goes. Don't forget with the 2nd plateau, its not installed with printer drivers, so you have to put all the letter paper in TRAY 2 (as you already have). Any other type of paper (legal, envelopes, etc.) will still go into Tray 1.

    Let me know if this can help, thank you.

  • Select the default tray when printing from MS Word or any other application HP OfficeJet 8610

    Hello

    We have HP OfficeJet 8610 with additional tray. So, we have Tray1 and bac2. That's what I read in the specs of the printer about how we can use the bins:

    • Loaded into all of the paper trays and use paper from a tray if the other tray is empty
    • Loaded into all trays and paper of one of the bins first use
    • Be able to choose plain paper and another type of paper that you use occasionally

    My question is:

    Let's say that we have put the tray 2 as the default tray.

    In MS Word or any other application in layout, you can define special tray (say 1 tray) paper source. This means that the document should be printed on paper from the selected tray (Tray 1). But in our case, the document is always printed using paper from the default tray (tray 2).

    Could you please confirm that this is the expected behavior?

    Thank you so much, Ana.

    Hi @AnaGligorijevic,

    I understand that you want to be able to print the same document at different trays and change the setting via the Word software. This printer is not able to change the settings of the tray for different pages in the same document to multiple pages.

    To work around this problem, you can use the parameter to "print pages." "Select it print pages selected, then for other pages ' print pages" yet once and then change the parameters of the status bar of the application.

    The application, you can change the settings of the tray for 1 page or a multiple page document. But it will print all pages of the specified tray.

    Hope that makes sense. Thank you!

  • Printing from IPad or Iphone always goes to Tray 1, but tiroir2 is the default tray.

    Product name: OfficeJet 8500 has more

    Op systems: Win 7 & Apple Ipad and Iphone and MAC

    Error messages: no

    Changes: has never been worked, no change

    I have two bins in my printer.  Tray 1 is used for envelopes and tray 2 is the standard letter paper.  Tray 2, is that the default bin for normal printing and works perfectly in my Windows 7 Desktop.Tray 1 is the only one who can handle the envelopes so there is no other choice on what bin to use.

    However, when I try to print from my IPad, IPone, or my wife's MAC, printing always goes to Tray 1 which contains only envelopes.

    It seems not all options in the IPad or Iphone to select a bin, but I would have thought it would go to the default tray which is installed in the printer.

    For this reason, it makes the officejet 8500 more useless a eprint.  I like having the upper tray for envelopes, but I don't know that I would have bought the option two tray if I had know this before time difficulty.

    Forward to your response

    Ray

    Hi Ray,

    • Mac, you can change the settings of the tray as follows:

    1. check that the second tray has been installed correctly. To check this open system preferences and go to Print & Fax. Open the print to your printer queue. Click Printer Setup and in the tab menu choose driver. Make sure the box next to the entry optional feeder is checked.

    2. starting at the application used to print, click the file menu and select print.
    The print window is displayed.
    NOTE: The print window might be minimized: click the blue triangle next to product model (Mac OS X v10.5 or v10.6) or the button view details (Mac OS X Lion v10.7) to see all of the available parameters.

    3. to select the input tray, click on the area of selection below, listed as the name of the program (e.g. TextEdit)
    Will appear as Copies & Pages within Microsoft Office applications.

    4. Select the Type/quality paper in the menu dropdown.

    5. adjust the Source option as the desired input tray.

    You can save the settings for later use by clicking preset > save current settings as preset.

    • For iOS, Airprint does not support any selection of tray, but only the 1st plateau.

    However you can use HP ePrint home & Biz however, taking charge of selection of the status bar:

    http://support.HP.com/us-en/document/c02775166

    Kind regards

    Shlomi

  • Screen Mode selection

    In PS CS6, Mac OS 10.7.5, I can only select the "standard" display mode (Display, the screen Mode, - select).  The other two options are 'greyed out '. Why?

    You can try the key "F" on your keyboard to see if the changes of mode of your screen?

    NOTE: You can change the screen mode only when you have a document open. By default, when you simply open Photoshop without any document open in this document, you can not change the screen mode.

  • 8620 + 2nd plateau: 8620 + 2nd default tray always in Tray 1 even when tray 2 is selected

    Hello

    I have a new 8620, so I bought the 2nd set of HP direct.

    I use an Imac with OSX El Capitan.

    I loaded in all the normal paper bins.

    I have put 1 as a defuault tray tray. When I try and print via my text editing software or any other software and I select tray 2 into the presets, it ALWAYS prints from Tray 1. The only way, he goes to tray 2 If Tray 1 is empty.

    I have change the default to tray 2 and then select Tray1 to print and it will not print at all.

    The software is not acutally allowing me to use as 2 separate trays.

    I use 2 documents of standard 8.5 x 11 for my business, but one is for invoices and I need to be able to select different trays.

    Also I noticed in the presets when selecting to print from the ADF, it will also not print from there, he pulls from Tray 1 again.

    Thank you

    Hi @vortexted,

    Welcome to the Forums of HP Support! I see that you are having problems printing from tray 2. I will definitely do my best to help you. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

    Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
    Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Officejet 8620)

    If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

    Please check the settings for the paper trays. The information is provided on page 31 of the manual, Officejet 8620

    If the problem persists, try the following:

    Fix permissions of the drive on the Mac:

    Close all applications.

    In the Apple menu, click OK, click Applications, and then click utilities.

    Double-click disk utility.

    Highlight your hard drive / partition on the left.

    Click on check and then repair disk permissions.

    Restart the computer...

    Reset the printing system:

    Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

    Click on the Apple icon and then click on System Preferences.

    Click on Printers & Scanners.

    Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

    Click OK to confirm the reset.

    Type the name and the correct password.

    Click OK to reset the printing system.

    Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

    If there is anything else I can help you, let me know. Thank you.

  • HP laserjet M425dn MFP 400: white pages when using the copy flow tray

    Our HP laserjet MFP M425dn of 400 printer suddenly started printing blank pages when I food pages in the sandbox of copy on top of the lid and go through the routine of copy 'optimize '.  When I place the original on the glass, then select copy, copies are missing from the top of the page.  I spent around and in the settings and made sure that I selected the normal size of plain paper (not legal, etc.), but have not solved the problem.  Any suggestions?

    There is a "Reset Factory Default" option in the Tools menu. Or you can reset the printer. This forum post has the details: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Cold-Reset-HP-LaserJet-Pro-400-MFP-M425dn/td-p/3105277

  • shadow copy volume in manual mode

    Original title: shadow copy volume

    Hello.should I turned windows volume shadow road to automatic or not? After the upgrade to windows 7 with a glance I noticed that is in manual mode.also of time windows is in the manual mode(i_don't_have_any_problem_s_with_time_clock_or_anything_else).what are the correct s installation?

    Hello

    Whatever it is the Auto value is load/started when starting. Whatever it is set to Manual is started/charges at the request of the program requiring this service.

    Volume shadow copy service is responsible for safeguarding. By default, services will be set to manual. There is no need to change.

    If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

  • Copy/paste in edit mode, is this allowed?

    Using SnagIt I want to copy a screenshot of the application and paste it into a blank slide in edit mode. I had no success, I can do this? I know that I can first create and save a .jpg image file, then use the option insert a picture in the Menu insertion, but it's much much longer. Is there another way?

    Thanks for your help.

    Hi Ken and welcome in our community

    Absolutely, you can do this! One thing I found with SnagIt, however, is that you must first do a Ctrl + A to select the entire image before copy you it. That one bites me all the time. I'm so used to just pressing Ctrl + C and here I am, that I always forget to select all first!

    See you soon... Rick

  • Photosmart e: 7520 7520 HP e - AIO printer cannot copy of tray of food or a bed. PC fine.

    Cannot copy from the tray or a bed. Correct PC.

    Message says "make sure document inserted at bottom and try again"

    Hey @jimack,

    I see that you have some problems with the copy of your 7520 Photosmart e-all-in-one printer. I can help you with that.

    To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once it is, while the printer is on, remove the power cable at the back of the printer for one minute.

    If after the above, you can always not copy, the printer must be replaced. You can contact the HP Support by clicking on this link and fill out the form below to discuss the options based on your warranty.

    Please let me know the results after following the above. If you are able to copy or to reach a resolution with the support, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  • HP LASERJET P3015: CHANGE MY DEFAULT TRAY and the PAPER WEIGHT

    MY DEFAULT PRINTER IS TRAY 1 AND I NEED TO CHANGE IT TO TRAY 2 AND THE WEIGHT OF THE PAPER IS AT LOURDES AND I NEED TO BE AT STANDARD, HOW TO MAKE THESE CHANGES?

    To change the settings on the printer:

    Menu

    > paper handling

    > Tray 2 (or plate preferably)

    > Type of tray 2

    > choose plain

    Save

    I hope this helps!

  • WRT1900ACS: Missing "802.11n only' and '802. "11A / n only" network Mode selections

    On my new WRT1900ACS (ACv2, loaded with the latest firmware 1.0.0.169041) I want to force the two bands in 802.11n only, but I can not because the choice of "802.11n only" does not appear in the drop-down lists.

    The only choices that appear on the Wireless tab are 'mixed', '802. "11b / g only", "802. 11 g-only", "802. 11 b only for 2 .4GHz' and '802.11ac only', '802. 11 a only"for 5 GHz.  It's as if Linksys has decided to remove the 802.11n choice from the graphical interface at some point.  Why?  I want this option of return.

    The manual States that there is a choice for '802.11n only' for the two bands.

    From the manual (WRT1900ACS_FUG_ENandFR - CA.pdf):

    p. 41:

    "You can then select Wireless-N only as network below Mode."

    p. 43:

    i. on the 2.4 GHz band, you can choose among the following:

    -Mixed technique

    -802. 11 b / g only

    -802. 11 g only

    -802.11 b only

    -802.11 n only

    II. on the 5 GHz band, you can choose among the following:

    -Mixed technique

    -802. 11 a only

    -802.11ac only

    -802. 11A / n only

    Use WPA2 Personal instead of WPA2/WPA mixed personal

  • How can I set the default value of a selection in the Query Panel with table.

    Hi Experts,

    JDev 12.1.3.0.0

    I have a view Criteria (contains a attribute with LOV). and the named criteria is dragged as a query with Table Panel.

    In the user interface, the LOV is now visible in the query Panel. Suppose that the LOV has 3 values: 'Manual', 'Other' and 'portfolio '.

    How can I set a default value for the choice of a select. ?

    Thank you

    Roy

    refer to:

    Andrejus Baranovskis Blog: Dynamic value by default for the field in query ADF search

    but rather to express as in the bellows of the image, choose literal and let 2

  • Copy the data from the selected record line

    Hello I use Oracle Forms Builder 10g.

    I want to copy a line from a record that populated the request but that the first lines can be copied when I click on it. I want to know how to copy the specific line-specific data when I click it. Thank you.

    Untitled 1.png

    using

    GO_RECORD(:SYSTEM.) MOUSE_RECORD);

    the current selected row updates as you click mouse a line. «: SYSTEM.» MOUSE_RECORD' gives you the line number of the recording, you click and it gives a value of '0' char if you click outside the record block.

  • How can I change the default hand tool to select tool when a document opens?  also how to open in a single page instead of 2 pages side by side view

    How can I change the tool to hand to the Selection tool by default when I opened a document.

    How can I change the display of 2 pages on one page?

    Try setting the checkboxes in Edit > Preferences > General to the following:

    -Make sure you select text of hand tool & images

    -Make sure you tool hand read articles

    -Make the tool use mouse wheel zoom

    These adjust to the need but it make a difference?

Maybe you are looking for

  • Change background color of page newtab to black.

    I can't change the background color of my page newtab to something other than white that it is today. Navigation in a dark room is extremely blinding, when opening the newtab page. In the past, I modified my file userContent.css with the following (a

  • How to limit my request to run n number of days.

    I'm writing using LabVIEW License Manager. I want to restrict my application run n number of days. My problem is how to restrict the user if it has changed the data and time of the PC.

  • HP Pavilion dm1-4400sa Windows 8 ISO download

    Hello I have a Pavilion DM1 laptop 4400sa. This came preinstalled with the HP OEM Windows 8. He has been cleared and had Win 7 installed on it. This unfortunately does not currently very well. I think it's down to driver problems, due to the difficul

  • How to install download and install drivers for AX88172?

    original title: ax88172 driver Hello... A few have AX88172 driver? Or can solve problems on AX88172, kindly advice me please. Thank you. James Park

  • WRT54G and Xbox 360, with no internet

    New Xbox 360 hard connected to the router WRT54G, router recognize xbox but does not connect to the internet. What should I change?