copy error: error 0 * 8007045D: the request could not be performed because of an i/o device error

Similar Questions

• "Receive the error message" Windows 7 error 0x8007045D: the request could not be performed because of an i/o device error. "

  Original title: Windows I/O device error?

  Hi all

  I'm Chinmaya and I use Windows 7 Ultimate.

  I have this error message.
  "Windows 7 error 0x8007045D: the request could not be performed because of an i/o device error."

  whenever I try to copy songs to my PSP device. In fact, it started when I was copying a 16 GB file from a USB on my computer. One night before everything was fine. But now he's screwed. I tried several times, restore, backup start in safe mode and almost everything that has been mentioned in other responses from Microsoft. Another important thing, I was you know is

  Whenever I connect my camera to the computer, my computer is not responding. All possible suggestions... Please help :)

  Hello Chinmaya Sharma,

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description provided, looks like you have a problem with the Windows 7 error 0x8007045D error message: the request could not be performed because of an i/o device error

  Perform the disk check and check.

  Check a drive for errors (Windows 7)

  Warning of Chkdsk.

  Important: When running chkdsk on the drive if bad sectors are found on the hard drive, then chkdsk attempts to repair this sector. If no data is available while data may be lost.

  Answer to us if you are having problems with error e/s or any other issue of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• Error message: the request could not be performed because of an i/o device error. (0x8007045D) while performing the backup does not back up Outlook

  Original title: Outlook backup problem

  I support my computer using an external hard drive.  "It does not backup Outlook, declaring: the request could not be performed because of an i/o device error. (0x8007045D).  What should I do?

  Hello

  1. How did you perform the backup? He used the Windows backup and restore functionality?
  2. you have any third-party backup software installed on your computer?
  3. have you done any software or hardware changes on your computer before this problem?
  
  To work on the issue, check the following link.
  
  Error message when you try to perform a full backup on a Windows Vista-based computer: "the application cannot be performed because of an i/o device error."
  http://support.Microsoft.com/kb/952272
   
  CHKDSK warning:
  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
   
  See also:
  Back up your files
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-files
  http://www.Microsoft.com/athome/Setup/backupdata.aspx
  Hope the information is useful.

• Drive HARD Ext cant allocated, it is said: the request could not be performed because of an i/o device error

  Hello world. IM new here.
  I would like to ask questions about the allocation of disk

  My drive HARD Ext (WD my passport) will not appear. so, I check in computer management, and my disk not allocated
  When I try to assigned by the following method
  It is said: the request could not be performed because of an i/o device error

  Please... is if everyone there a solution to this issue?

  I tried to update the firmware, WD Essential, WD utilities

  but this does not solve the problem...
  When I try to checkdisk in promptcomand but I don't know how to put it, because the drive isn't there...

  Please help me...

  Hello

  This error may be coming because of unavailable storage required for the motherboard drivers. You can follow the steps one by one, mentioned below and check if that helps.

  Method 1: Uninstall, and then reconnect the external hard drive. This method solves the problems where the currently loaded USB driver has become corrupt or unstable.

  1. Click Start, type Device Manager in the box Search
  2. Click Device Manager in the returned list.
  3. Click disk drives in the list of hardware
  4. Right click on the USB external hard drive with the question and click Uninstall.
  5. Once the hard drive is uninstalled, disconnect the USB cable.
  6. Wait 1 minute and then reconnect the USB cable. The driver should load automatically
  7. Look for the USB key in Windows Explorer

  Note: Connection of your USB external hard drive to a non powered USB hub can cause a lack of sufficient power to operate the external drive. Instead, plug it directly into your computer.

  Method 2: Install the latest Windows updates.

  This method will install the latest drivers for your external hard drive USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  If your problem still exists, go to method 3.

  Method 3: Reinstall the USB controllers. This method addresses the steps where the USB driver currently loaded became unstable or corrupted.

  1. Click Start, type device in the area Manager Search , and then click Device Manager.
  2. Expand Bus USB controllers. Right click on a device, and then click Uninstall. Repeat for each device.
  3. When finished, restart your computer. Your USB controllers will automatically install.

  If your problem persists, go to method 4.

  Method 4: Disable USB selective suspend framework. This method prevents your power off USB external drive.

  1. Click the Start button, type power management in the search box, and then click choose a power plan.
  2. Next to your currently selected plan, click Change Plan settings.
  3. Click change advanced power settings.
  4. Click in the box USBsettings, and then expand the USB selective suspend settings.
  5. Click on the area, and then click the menu drop down and select disabled.
  6. If you use a laptop, click the cell, and then click the menu drop down and select disabled.
  7. Click apply, and then click OK.

  If this does not resolve your issue, go to method 5.

  Method 5: Install the latest drivers for your motherboard chipset. This method updates the chipset of your motherboard drivers, so that your computer will use your external USB hard drive.

  1. See the documentation for your computer that will contain the name of the manufacturer of the motherboard.
  2. Visit your computer manufacturer's support Web site. For a list of the computer manufacturers support sites, visit: http://windows.microsoft.com/en-US/windows/help/contact-support/computer-manufacturers
     (http://windows.microsoft.com/en-US/windows/help/contact-support/computer-manufacturers)
  3. Go to their Web site to find the appropriate drivers for your motherboard. For assistance, contact the manufacturer of your computer.

  Please post with the State of the question.

• Errors running SQLIOSim - Simulator/o SQL - error: 0x8007045D error text: the request could not be performed because of an i/o device error. Description: failed to get the info from cache drive to C:\

  When we execute SQLIOSim on a Server Windows 2003 VM hosted on an ESX 3.01 or 3.5 server, you get the following messages:

  Error: 0x8007045D

  Text of the error: the request could not be performed because of an i/o device error.

  Description: Failed to get the info from cache drive to C:\

  Anyone know what is the cause or how to solve the problem (if it is a question)?

  Thank you

  Had the same error and found this blog:

  http://blogs.msdn.com/psssql/archive/2008/01/14/SQLIOSim-error-request-could-not-be-performed-unable-to-get-disk-cache-info.aspx

  It will be useful.

• I'm trying my computer, but for some reason any that it won't let me back. Error "the request could not be performed because of an i/o device error (0 x 80070450)"

  Original title: I try my computer, but for some reason any that it won't let me back. and I get an error message

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: have problems with window vista home premium

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello Mipregunta,

  Thanks for your quick response! I suggest that you try to visit the following article for steps on how to solve your problem:

  http://support.Microsoft.com/kb/952272

  Please let me know if this helps J

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Equium A60-191: 'request could not be performed because of an i/o device error. "

  I have an Equium A60-191 my dvd drive has stopped working, the led on this subject is on all the time like his who seek constantly.
  It does not read the CD or dvd and gives an error "REQUEST COULD NOT BE PERFORMED DUE TO A DEVICE IO ERROR.

  I tried to remove and reinstall the drive from the Device Manager, it doesn't help. I also tried to boot from the drive computer, but does not start, so I think that the drive does not work.

  I also noticed that the motor does not work in the reader, because that drives don't spin. Device Manager indicates that the drive works properly. Anyone know what is this error?

  1. click on start
  2. right click on my computer
  3. Select manage from the menu that appears
  4. in the computer management window, select Device Manager
  5. in the right pane, click to expand IDE ATA/ATAPI controllers
  6 identify your CD/DVD drive in the menu expanded and right click on the appropriate drive
  7. Select Properties
  8. in the Properties window, click the Advanced Settings tab
  9. in the Transfer Mode box that represents your CD/DVD drive (typically device 1), open the menu drop down and select PIO only
  10. click OK and exit all windows.

  If this does not solve your problem, then you need to go back using the procedure above and change device 1 to #9 step will support to 'DMA if available '. Then, change the device 0 to "PIO" only in the Transfer Mode box.

  Device 0: Primary IDE Channel
  Unit 1: Secondary IDE Channel

  Of course, he could also be dead DVD player. In this case, a new drive should solve the problem.

• Save the 0x8078002A error code. The request could not be performed due to the i/o device error (0x8007045D).

  I tried to backup my C folder on a hard disk extrenal and received the following message:

  
  OT: Backup failed Windows7 0x8078002A error Code.
  Quote
  One of the files of backup could not be created (0x8078002A). The request could not be performed due to the i/o device error (0x8007045D).
  End of quote
  Can someone advise me?
  Nitin

  Hello

  Method 1
  Check the shadow copy Volume service in the services window. Use the following steps to check:

  a. Click Start and type services.msc in the search box

  b. Locate the Volume Shadow Copy service

  Make sure that the startup type is automatic. Steps to set the auto services

  a. Locate the service

  b. right-click on the service

  c. If the service is stopped and then starts the service

  d. Select Properties

  e. and in startup type, select automatic

  Method 2
  Try the steps listed in the link below: error message when you try to perform a full backup on a Windows Vista-based computer: "the request cannot be performed because of an i/o device error":http://support.microsoft.com/kb/952272 (for Windows 7)

  Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

• When I try to create or convert a PDF file in Acrobat DC I get the error "your request could not be performed. Adobe Acrobat DC license has expired or not been activated. "This will happen even if Acrobat is installed via a Customization Wizard

  When I try to create or convert a PDF file in Acrobat DC I get the error "your request could not be performed. Adobe Acrobat DC license has expired or not been activated. "This happens even if Acrobat is installed via a package of the Customization Wizard of the product which takes care of activation and the license is not expired. What could be the cause of the issue?

  Uninstall your creative cloud application that basically allows you to download apps and redownload it. This should do the job. Your system just lost you license update.

• Lightroom 5.6 error: the file could not be modified because Photoshop CC could not be launched...

  I upgraded to lightroom 5.6 recently and I use photoshop cs 6.

  My OS is windows 8 on i5 4670 with R280X gfx card 16 gb of ram

  After editing photo with lightroom, when I right click Edit in photoshop, immediately launch of photoshop, but the image is not imported into photoshop.

  After like 30 seconds a pop error message off saying "the file could not be modified because Photoshop CC could not be started".

  After another 10 seconds then the picture appear in photoshop... it becomes irritating for the me.

  
  

  If I select just open the original or a copy of the original, it works very well. It happens only when I try to open it with changes in lightroom.

  
  

  I had to uninstall/reinstall the photoshop and lightroom as well by removing all plugins, I had, but the problem doesn't go away.

  
  

  Another problem with lightroom 5.6 is the adjustment brush is slow and lazy, so it is unusable when I zoom using the adjustment brush.

  I have not had this problem until I upgraded. OMG

  
  

  does anyone have the solution to my problem?
  

  I upgraded to the latest version of ps cc 2014, problem solved.

  resemble cs6 I overwhelmed or something

• Whenever I try to update Acrobat XI 11.0.07 I get the error message: the update could not be applied because Adobe Application Manager is running. Please close Adobe Application Manager and look for updates again. This happened for months,

  Whenever I try to update Acrobat XI version 11.0.07 I get the error message: "the update could not be applied because Adobe Application Manager is running." Please close Adobe Application Manager and look for updates again. »

  
  

  This happened for months and still fails in the same way.

  You can download Acrobat pro XI of the same link:

  https://helpx.Adobe.com/Acrobat/KB/Acrobat-downloads.html

• Try to download a trial version of Acrobat Pro, but of course, I have an error message: "the application could not be installed because the Installer file is damaged. Try to get a new setup of the author of the application file. Any suggestions?

  Try to download a trial version of Acrobat Pro, but of course, I have an error message: "the application could not be installed because the Installer file is damaged. Try to get a new setup of the author of the application file. Any suggestions?

  Download from http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html.

• Error message the application could not be installed because the Installer file is damaged. Try to get a new setup of the author of the application file.

  
  

  The error message happens chronically today.

  It does not matter what I try to install the air file.

  I uninstalled, cleaned the registry and all the usual things.

  And then re-installed-with the same error messages

  
  

  Windows 7. Current update.

  processor 2.8 ghz, 12 G Ram - one machine to cook breakfast and make the beds.

  
  

  
  

  " The application could not be installed because the Installer file is damaged. Try to get a new setup of the author of the application file. "

  
  

  
  

  This is the last log of installation-

  I am not able to find out how to decipher what it means.

  
  

  Someone would have noticed?
  

  
  

  [2015-02 - 18:10:58:58] Unpackaging/validation complete

  [2015-02 - 18:10:58:58] no app location to "LocalizerLeadsTool" appID and pubID "

  [2015-02 - 18:10:59:01] conversion of unpackaged to a native installation package in C:\Users\admin\AppData\Local\Temp\flaAA62.tmp application

  [2015-02 - 18:10:59:02] create an installation package Native failed: [ErrorEvent type = "error" bubbles = false cancelable = false eventPhase = 2 text = "unhandled exception error: EndUpdateResource: error Windows #5" errorID = 0]

  [2015-02 - 18:10:59:03]

  I got a response on another area of support.

  And

  Because I asked for help here-

  I think it's the kind of thing to do to post the

  steps that allowed me to correct.

  I knew I had the latest Adobe air platform.

  I felt that I knew that the download files were updated.

  So-

  What was one of the suggestions I've had -

  Told to turn off the firewall and antivirus.

  Instinct made me disconnect the machine from the router.

  I continued and disabled all the protections I had put in place-

  and watched as the first program installed air -.

  Since before January.

  Then put those protections back in line.

  And re-attached the router line.

  It doesn't seem to work now.

• Updated to the Mavericks and obtain the following: could not initialize Photoshop because of a program error

  Updated to the Mavericks and obtain the following: could not initialize Photoshop because of a program error

  I tried all will set them on the web that I can find is Trash the Prefs, shift when it is open and plug-ins stop, download Java Update, deleted and reinstalled

  My business is to stop can't find a fix from Apple

  Did you run the vacuum after you have uninstalled and before reinstalling?

  -http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  AND JUST FOR MAC USERS - some links 10.9.x

  the following link tells After Effects, but check YOUR permissions.

  -http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml

  -Mac 10.9.4 and OpenCL number https://forums.adobe.com/thread/1514717

  -Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922

  -more than Mac 10.9.3 https://forums.adobe.com/thread/1491469

  - and https://forums.adobe.com/thread/1507936

• "Cannot change the priority. The operation could not be performed. Access denied. "

  When you attempt to change the priority of a process in the Task Manager (no matter what process, I've tried a few) I get the error message: cannot change the priority. The operation could not be performed. Access denied. It is while being logged on as an administrator. Would appreciate a solution.

  Since Windows Vista and Windows 7, a logon administrator account always uses a standard or limited account for certain purposes. To access these properties, you can run a program using the "Run as administrator". To run as an administrator, you right-click on a program and select "Run as Administrator" in the right click menu.

  Some processes of the system, such as services, you cannot change even as an administrator.  Come on in "show processes from the user all the" which will ask for permission. Then reopen the task Administrator Manager and then see if you can change the priority.