copy main typedef not found
Hi all
I posted this question in the LabVIEW forum, but I guess that maybe the teststand discussion forum should be better, so I'm now posting here.
I have a problem with my typedefine (Teststand UI Data.ctl) in the UI (derived from the interface chart single of Teststand). In the implementation, I was always able to add reminders in response to Teststand events in the past.
Recently when I try to add a new reminder of a Teststand events, I get error saying that the master copy Typedef is not found or error. What I find odd are:
1. If the Typedef master copy was not found or error comes, why would the error affect the reminders already implemented for other events Teststand?
2. If the Typedef master copy was not found or error comes, why is it possible to run the program?
Here I have 2 screenshots. The first screenshot shows the reminder of existing, where there is no error of the master copy of Typedef not found or error. The second screenshot shows the error when a new reminder is added to another event.
The main copy of Typedef, call TestStand UI Data.ctl is also shown in 1 screen capture, and it is located in the TestExec.llb, as shown in the third screenshot.
I'm not sure how to start debugging this problem, that is why I hope that experts from teststand out there can give me some advice.
I am using 32-bit LabVIEW 2014 and 2014 Teststand 32 bits. Running on the Windows 7 system.
Thank you.
Yours sincerely
chati
The simplest solution to this problem is to open the broken VI. Right click on the broken control and replace with the control of the typedef.
The reason why he broke up is because you changed the typedef and VI was not in memory to be updated. The EndEdit event callback is looking for a TestStandUI Data.ctl. However, this file no longer exists (and so your error) according to the other screws, you renamed it to TestESystemUI Dependencies.lvlib:TestStandUI Data.ctl. Be sure to have your files loaded into memory before rename/modify a location of VI. Way the easiest is to have all the related screws project that endedit was not
Tags: NI Software
Similar Questions
-
Hi all
I have a problem with my typedefine. I bypass my implementation an example LabVIEW to implement the user interface for Teststand (Simple user interface). In the implementation, I was always able to add the recall in response to the events of Teststand in the past.
Recently when I try to add a new reminder to an another Teststand events, I get error saying that the master copy Typedef is not found or error. What I find odd are:
1. If the Typedef master copy was not found or error comes, why would the error affect the reminders already implemented for other events Teststand?
2. If the Typedef master copy was not found or error comes, why is it possible to run the program?
Here I have 2 screenshots. The first screenshot shows the reminder of existing, where there is no error of the master copy of Typedef not found or error. The second screenshot shows the error when adding a new reminder.
The main copy of Typedef, call TestStand UI Data.ctl is also shown in 1 screen capture, and it is located in the TestExec.llb, as shown in the third screenshot.
I'm not sure how to start debugging this problem, that is why I hope that LabVIEW experts out there can give me some advice.
I am using 32-bit LabVIEW 2014 and 2014 Teststand 32 bits. Running on the Windows 7 system.
Thank you.
Yours sincerely
chati
Hello Bob_Schor,
I don't think that it is a problem of Teststand, rather a problem of LabVIEW. But I could be wrong. I'll close the display here. Open a new message in forum Teststand.
Thank you.
Yours sincerely,
chati
-
Generation of ants | Classes main mx not found
Hello
I am configuring build ant for my flex builder 3.2 project. I'm getting error as follows
Error: Type was not found or was not a compilation constant: RadioButton
Error: Type was not found or was not a compilation constant: LinkBar
Error: Type was not found or was not a compilation constant: EmailValidator
And a couple more type not found errors. All of these errors are for the base flex classes. Also, I don't get these errors for each of the flex, only a few classes. How can I solve this?
You should probably add base libraries to your mxmlc tag. The example has this part in the build script
Only, you get this error for the classes that you are trying to use in your code, not for each class of Flex.
-
Hi all
I am facing problem when I try to create the JAR file.
After creating the Jar file I tried to run but error message
Main class not found.
I follow these steps
(1) my WordNetOK.javaimport java.io.File; import java.io.FileNotFoundException; import java.util.Scanner; import edu.smu.tspell.wordnet.*; public class WordNetOK{ public static void main(String args[]) throws FileNotFoundException { System.setProperty("wordnet.database.dir", "C:\\Program Files (x86)\\WordNet\\2.1\\dict\\"); WordNetDatabase database = WordNetDatabase.getFileInstance(); String result = ""; NounSynset nounSynset; NounSynset[] hyponyms; //creating File instance to reference text file in Java File text = new File("C:/javacode/WordNetin.txt"); //Creating Scanner instnace to read File in Java Scanner scnr = new Scanner(text); //Reading each line of file using Scanner class int lineNumber = 1; while(scnr.hasNextLine()){ String line = scnr.nextLine(); Synset[] synsets = database.getSynsets(line); for (int i = 0; i < synsets.length; i++) { String[] wordForms = synsets.getWordForms();
for (int j = 0; j < wordForms.length; j++) {
System.out.println(wordForms[j]);
}
}
//System.out.println("line " + lineNumber + " :" + line);
lineNumber++;
}
}
}
Main-Class: WordNetOK2) Javac WordNetOK.java it create a class file 3) i create Manifeast.txt
C:\Javacode > jar cvfm WordNetOK.jar Manifest.txt WordNetOK.class4) i run this
Adding manifests
adding: WordNetOK.class(in = 743) (out = 435)(deflated 41%)
C:\Javacode > java-jar WordNetOK.jar5) i tried to execute it as * java -jar WordNetOK.jar * But error appear could not find main class
Exception in thread "main" java.lang.NoClassDefFoundError: WordNetOK
Caused by: java.lang.ClassNotFoundException: WordNetOK
in java.net.URLClassLoader$ 1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged (Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
The main class is not found: WordNetOK. Program ends.
C:\Javacode >
set PATH = C:\Program Files\Java\jdk1.6.0_32\bin;Note : i execute the classpath at beginning
set the classpath = C:\Program Files\Java\jdk1.6.0_32\bin;\javacode.
Edited by: Ayham on Apr 6, 2013 7:39 AM Edited by: Ayham on Apr 6, 2013 7:41 AM Edited by: Ayham on Apr 6, 2013 7:45 AM
Why are you creating your own manifest file? Let just for you Java.
It works for me using 1.6
C:\Javacode>jar cfe WordNetOK.jar WordNetOK WordNetOK.class C:\Javacode>java -jar WordNetOK.jar Hello World.
Generally, you should leave a tool (e.g., Netbeans, Ant) create the manifest because they know how to do it properly.
-
Hello
I recently installed App Server 10.1.2.0 on a new machine.
Copied all my forms on an appropriate directory. Implement formsweb.cfg to allow them to perform and attempted to run them.
Unfortunately, I'm stuck at loading Java Applet and screen in the status bar at the bottom that it is said:
load: class oracle.forms.engine.Main not found
I took a peek at the Java Console, and the 2 things that jump out to me are that it seems to be looking for a directory of forms90, which seems odd since I use App Server 10.1.2.0.2, and meaning of Forms Builder 10.1.2.0.2 should it be looking in a repertoire of forms not forms90 should - not?
And in addition, he mentions class without proxy, so now by browsing the forums it was suggested that put the details of proxy in jinitiator, what I did, but it made no difference either.
Can someone suggest something else please?
The Java Console log follows.
Thank you very much
Scott
Oracle JInitiator: Version 1.3.1.9
Using JRE version 1.3.1.9 Java hotspot Client VM
User home directory = C:\Documents and Settings\hilliers
----------------------------------------------------
c: clear console window
f: finalize objects on the finalization queue
g: garbage collection
h: display this help message
l: dump classloader list
m: print memory usage
q: Hide console
S: dump system properties
t: dump thread list
x: delete the cache of class loaders
0-5: set the level of trace to < n >
----------------------------------------------------
Listener of the unregistered mode
Removed the trace listener: sun.plugin.ocx.ActiveXAppletViewer [oracle.forms.engine.Main, 0, 0, 914 x 613, layout = java.awt.BorderLayout]
Sending events to the applet. STOP
Sending events to the applet. DESTROY
Sending events to the applet. HAVE
Sending events to the applet. QUIT SMOKING
Search for information...
Releasing the classloader: sun.plugin.ClassLoaderInfo@d9850, refcount = 0
Caching of classloader: sun.plugin.ClassLoaderInfo@d9850
Current ClassLoader cache size: 1
Fact...
Modality registered listener
Referencing of classloader: sun.plugin.ClassLoaderInfo@d9850, refcount = 1
Added the trace listener: sun.plugin.ocx.ActiveXAppletViewer [oracle.forms.engine.Main, 0, 0, 914 x 613, invalid, layout = java.awt.BorderLayout]
Sending events to the applet. LOAD
Sending events to the applet. INIT
Sending events to the applet. BEGINNING
Determine if the applet asks to install any HTML page
HTML Setup is complete.
Opening http://appserver008/forms90/java/oracle/forms/engine/Main.class
Http://appserver008/forms90/Java/Oracle/Forms/engine/main.class connection without proxy
Opening http://appserver008/forms90/java/oracle/forms/engine/Main.class
Http://appserver008/forms90/Java/Oracle/Forms/engine/main.class connection without proxy
load: class oracle.forms.engine.Main not found.
java.lang.ClassNotFoundException: java.io.IOException: open HTTP connection failed.
at sun.applet.AppletClassLoader.getBytes (unknown Source)
in sun.applet.AppletClassLoader.access$ 100 (unknown Source)
to sun.applet.AppletClassLoader$ 1.run (unknown Source)
at java.security.AccessController.doPrivileged (Native Method)
at sun.applet.AppletClassLoader.findClass (unknown Source)
at sun.plugin.security.PluginClassLoader.findClass (unknown Source)
at java.lang.ClassLoader.loadClass (unknown Source)
at sun.applet.AppletClassLoader.loadClass (unknown Source)
at java.lang.ClassLoader.loadClass (unknown Source)
at sun.applet.AppletClassLoader.loadCode (unknown Source)
at sun.applet.AppletPanel.createApplet (unknown Source)
at sun.plugin.AppletViewer.createApplet (unknown Source)
at sun.applet.AppletPanel.runLoader (unknown Source)
at sun.applet.AppletPanel.run (unknown Source)
at java.lang.Thread.run (unknown Source)Hello
What did you put in the tag to archive your formsweb.cfg file?
François
-
Windows appear on the taskbar, but won't focus, other 3 goes, only 1 that seems to be the main window is not found
ALT + tab select window; ALT + SPACEBAR; maximize; sigh
-
When I click on a link in an e-mail, I get the message following 'application not found. The only way I can access the site is to copy the link, but it is not always possible. Can you advise?
Hello
Follow these steps to solve the problem.
Step 1
a. Click Start, default programs
b. Click set your default programs
c. Select your browser from the list
d. Click set this program as default
e. click OK.Then proceed as follows:
Step 2
a. click settings by default access and computer program Set
b. click on continue if you see the user account control prompt.
c. click Customize
d. Select your browser from the list
e. click OK.Kind regards
Afzal Taher
Microsoft technical support engineer -
Hello
I'm developing for BlackBerry with the JDE-Eclipse-Plugin - 1.0.0.67 on an Eclipse - 3.4.2 using the 4.7.0.46 Simulator.
Eclipse seems to not compile not more. When I start the debugger the compiler runs but out corrupted producese, i.e. when the Simulator starts the application under development does not apear in the download section.
I get the following message in the newspaper comile.
WARNING! : no entry point found
Optimization
The fill
WARNING! : no definition not found for static exported routine: .main (String [])I tried...
.. .to close the project in eclipse.
.. to remove the project and reimport to Eclipse.
When I run the debugger of the JDE, everything works fine.
Someone at - it an idea to solve this problem?
I solved the problem. The reason was a misconfigured bin-path in the classpath of eclipse. Eclipse has generated the classfiles in a place other than the compiler of the CAP have searched for them. 'S done it by the classpath setting. Now, everything works very well as he has done before.
Thank you for helping me.
-
Hello world
In the JDE, I opened two different projects in the workspace of "samples" where all demonstration projects. One of my apps built correctly, also it is open in the Simulator and runs smoothly. But in the same way, when I try to build and run my application to another, it shows in the Simulator.
When generating, it displays the following warning, but still shows the "full version".
WARNING! : no definition not found for static exported routine: .main (String [])
What could be the problem? In my application, there is no hand method (String []) anywhere. Please help me to solve the problem, as I can't test my application. Best regards.
Hi Rene, I found the solution. Can't say, it's a solution, but is a parameter that is required to be done, especially for execution the Midlets. Just put here what I did... Select the project, right-click on it, then select the "Application" tab, and then change the 'Midlet' Project Type, then click OK. She's. Clean and build the project, now it will not show the warning. in any case, thanks much, Rene, for your time and valuable suggestions. Best regards.
-
ODI-1222: start failure on agent edge internal: logical schema was not found in the main repository. but when checked that all the logical schema is perfect
because of this session is failing.does anyone have the solution to this problem
Hello
Do you have the logical schema of the you configured for the respective physical server and assigned the same context. If not, please set up and re - test your work.
hope this can help you
Kind regards
Phanikanth
-
I can't open a pdf file of network. I get the error, "there was an error opening this document. This file is not found. "If I copy it to the desklop can I open it.
I have Adobe Acrobat XI version 11.0.12 and running windows 8.1
Hi brianh66664582,
Try the solutions suggested in this thread Re: could not open the files on the network server..
Kind regards
Nicos
-
Oracle.Forms.Engine.Main not found
Salvation;
My ststem is 11.5.10.2 on linux. I get this error when I try to launch the interface forms free service:
Oracle.Forms.Engine.Main not found
This system clon on test server but I have no problem when I got the system live login on the live server
I followed:
MetaLink Note 465063.1 this clinet is not any proxy, I also follow this too:
1 uninstall Langis
2. install travel location (I try defatult location too)
3. clear money
4 Control Panel-> administration of JInitiator, console the option "Use browser settings" and "use a proxy" is disabled.
But the problem is always appear... In the Java console, I noticed those it gives error for files below and a pop up screen opened and said that download these files:
WARNING: Impossible to cache xxx:800x/OA_JAVA/oracle/apps/fnd/jar/fndforms.jar java.net.ConnectException: connection refused: connect
+/XXX/OA_JAVA/Oracle/Apps/FND/jar/fndctx.jar+
+/XXX/OA_JAVA/Oracle/Apps/FND/jar/fndlist.jar+
+/XXX/OA_JAVA/Oracle/Apps/FND/jar/fndaol.jar+
+/XXX/OA_JAVA/Oracle/Apps/FND/jar/fndbalishare.jar+
+/XXX/OA_JAVA/Oracle/Apps/FND/jar/fndswing.jar+
+/XXX/OA_JAVA/Oracle/Apps/FND/jar/fndewt.jar+
+/XXX/OA_JAVA/Oracle/Apps/FND/jar/fndformsi18n.jar+
+/XXX//OA_JAVA/Oracle/Apps/FND/jar/fndforms.jar+
Any idea or advice?
Thank you
HELIOSHelios,
Please regenerate all JAR files through adadmin (with option of FORCE) and see if it helps.
Also, please check error_log and access_log files, you find more information about the error in these two files.
Kind regards
Hussein -
Can not import a copy of the application to our workspace. The page is not found
Hello
We have an existing schema and workspace called track 2 and everything was fine. We could export a copy of the application of prod and import it under a different number, so we could test some changes.
Then, we created a new workspace and schema called track3 and I tried to export a copy of prod and its import in track3 workspace.
It gave the error:
The page is not found
The page you are looking for has been removed, had its name changed, or is temporarily unavailable.
The URL, he found himself on after that the error was http://ourServer:7778/pls/apex/wwv_flow.accept
In troubleshooting, we went back track 2 environment and cannot import copy of this old workspace more either.
This has happened before on another post (contract), I was on and fixed it himself.
Then we tried to bounce the server HTTP, did not work. I tried to bounce the database server has failed.
What can do us?
Please, any help is appreciated. BillTo debug the problem using SQL * Plus, you must connect as KMX2 in the production database. If the script fails, there will be no harm. You can remove the validation of the end of the script and replace it with a restore where the script is not and you want to ensure that there are no changes to your db prod.
Don't you think that the version 3.2 upgrade would fix our problem?
I do not know.
Scott
-
Original title: How can I find backup Windows Mail e-mail files that are now gone?
How to find Windows Mail registered mail files that are now gone? My business is done mainly by e-mail and I save each citation in the e-mail to the client file. When I return to open the mail it says "content of this message is not found." Windows mail. How can I recover these files?
Hello
You can perform the following methods and check if it solves the problem.
Method 1: Rebuild the Windows Mail message store
This method will help you rebuild the message store. By rebuilding the message store, only the messages that have no errors cannot be loaded and delete messages that contain errors.
To remove the Windows Mail message store file and then rebuild, follow these steps.
Look for the message store
For Windows Mail, by default, the data is stored in the location C:\Users\
\AppData\Local\Microsoft\Windows Mail Check if the data is present in this folder. If it is present, you can import the data into Windows mail.i. open Windows Mail by clicking Start , all programs, and then click Windows Mail.
II. click on the file menu, point to importand then click Messages.
III. click on Windows mailand then click Next.
IV. make sure import mail from a windows mail store directory is selected, and then click OK.
v. click Browse, find the folder of windows Messaging (C:\Users\\AppData\Local\Microsoft\Windows Mail ) you copied to this computer and then click on the file once to select it. (Do not open the folder when you select).
VI. click Select a folderand then click Next.
VII. click all folders to import all the folders, or click Selected foldersand select which message folders you want to import and then click Next.
VIII. click Finish.Method 2: Virus scanner
You can download Microsoft Safety scanner, which provides on-demand scan, and remove viruses, spyware and other malicious software. It works with your current antivirus software.
See the link to download Microsoft Safety scanner on the system.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Warning: The data files that are infected can be cleaned by removing the file completely, which means that there is a risk of data loss.
Hope the helps of information.
-
sdnclean64.exe program not found - skipping Autocheck
sdnclean64.exe program not found - skipping AUTOCHECK
I get this error at the start of Windows 7 Home Premium. Anyway I can get this executable so Windows will do his boot cleaning function?
Thank you
Chris
Thank you for responding.
http://www.TomsHardware.com/Forum/349353-33-help-system-randomly-crashes-installing-7870
There were known issues with this particular GPU from ATI/AMD. Surprisingly, the card works fine with an old motherboard Asus, I have in a previous version. Given that the system has an activated copy of Win 7 Ult on it, I still have in service and access it through my main machine via the desktop remotely (product activation and DRM took some of the fun of upgrading material - I see it as an evil necessary.) Companies have the right to intellectual property, but it becomes more expensive to upgrade if you need to buy a new license every time you change on your motherboard). The guys at Asus even suggest to use an older driver for the card on my main machine. I submit all my screenshots and a dersription of the problem to technical support at AMD. If all goes well, they'll find a fix fo as they did for the TLB bug Phenom processors original back in early 2008.
Maybe you are looking for
-
How can I convert an old word AppleWorks document?
Hello We have a Mac Mini end of 2014 and have attached an old drive to a PowerMac 2002 and discovered that we have important documents that were created with AppleWorks 6.2.9 that we have been missing. Is there any tool that will open these document
-
PDF, COPY AND PASTE FILES
A Treasurer, I send monthly reports and statements my Secretary into the monthly minutes. He told me that when sent in PDF format, although it can download and open it can then transfer the minutes ("you can't copy and paste the content of PDF files"
-
In the Media Center in XP System Restore does not work
Hello everyone, I'm new to this forum so please be gentle! I have a Dell Dimension E521 with XP Pro Media Edition. 12 months after I bought the pc, I had a problem and wanted to use system restore. The calendar showed various restore points, so I cho
-
Help blackBerry Smartphones! How to reset the password for Wifi?
Hi there - just got a Blackberry "BOLD", today, but trying to connect to my network domestic wi - fi, I mistyped the password. When I try to connect to the wi - fi, I get a message telling me that "the connection failed due to incorrect network cred
-
BlackBerry smartphones freezes when downloading
When I try to download apps, that it never ends. How can I stop it tries to download an application? Now, I can't download anything. I have a curve.