Copy / paste stop working. Recently upgraded to Windows 10

Similar Questions

• Copy / paste stops working in Windows 7 Pro

  Hello

  We have a PC running Windows 7 Professional 64-bit, Quad i7, 8 GB of RAM. The machine is used for editing desk top - CS6 Adobe, Microsoft Office 2003, CAD. The machine will be left on for extended periods of time. Reboots occur if the system plays to the top (which is rare), or when Windows Update requires a restart.

  In rare cases, copy and paste in Windows work stoppages - which means that nothing can be copied and pasted between any application: Notepad, Word, Wordpad, etc. InDesign. CTRL + C and Ctrl + V do not. If we use the Edit menu to copy, and then in the same application or in another application click Edit, paste to the option is grayed out.

  A reboot will fix it.

  I ran SFC/scannow, but no problem not found:

  Microsoft Windows [Version 6.1.7601]
  Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

  C:\Windows\System32>sfc/scannow

  Start scanning system.  This process will take time.

  Start of the phase of verification of the scanning system.
  Full check of 100%.

  Windows resource protection did not find any breach of integrity.

  C:\Windows\System32 >

  Even if a reboot can solve this problem there are times where a large number of applications will be open and restart becomes a major obstacle. I don't want this issue to become a common problem, so I was wondering if you people had any suggestions that I could try to track down why it happened and how I can prevent it or even provide a fix that re - allows you to copy paste & without requiring a reboot.

  Thank you very much.

  There is a long thread here on this subject, with several proposed solutions.

• Speakers Logitech Z313 stopped working after upgrading to Windows 7

  I delayed upgrading to Windows 7 until after I graduated from College just for this reason. I just installed Windows 7 and my Logitech Z313 speakers that worked perfectly well in Windows XP are not recognized as material.

  There is no yellow! device drivers, I have the "High Def Audio" largest later device driver installed. Troubleshooting Windows does not detect a problem with anything. My speakers are working properly. When I disconnect or shut down the PC, I can hear the feedback and the pop Logitech has no drivers for these speakers because they must be detected automatically by the system when they are connected. I tried unplugging / plugging in different ways.

  Can anyone help?

  Thank you.

  Hello

  I quite had the same problem and found the solution: you must uninstall your device, then go to control-online Device Manager Panel => are looking for the "!" symbol on your list, then right click on 'properties' and 'details', you will see a list with weird names (ex: HDAUDIO\FUNC_01 & VEN_10EC & DEV_0662 & SUBSYS_18497662)

  Copy it and go to , paste it into the search bar, and then select your 'Windows' (for me it was 10 Win 64-bit), download the driver and install it. Fact! :-)

  Problem solved ^^ not by Microsoft or Logitech, unable to understand this problem, caused by the update of Windows 10... (-_-(

• Subwoofer stops working after upgrade to windows 7. __

  After the upgrade to Windows 7 my subwoofer is no longer in effect. I tried to uninstall the driver and the re - install the latest drivers, but it does not work. Strange thing, it is that the sub will work in test phase of the program, but not in music playback. Any help would be appreciated.

  Finally figured it for people with Realtech HD audio drivers! All you do is, right-click on the volume in the taskbar.  Click playback devices. Click the speakers properties. Access improvements. Activate bass management. That's all! Alternatively click on correction of the room and set the PB to have more control.

• Microsoft Bluetooth Keyboard 6000 randomly stops working after upgraded to Windows 7

  I just put my laptop to windows 7, previously using Windows XP. I have not had any problems with the Bluetooth keyboard/keypad, but now I have to add a link to them at least once / day. During the last 30 minutes, I had to do it twice. A way around this?

  Hello
   
  Follow the steps mentioned below.
   
  Step 1:
   
  Plug the keyboard into another computer and see if the problem still occurs. For more information, see the article mentioned below.
   
  Troubleshoot the incidents of the response to the mouse or wireless keyboard
  http://support.Microsoft.com/kb/838398
  
  Step 2:
   
  It may be that a third-party application is causing this issue. Put the system at boot. Follow the steps mentioned in the article given below to configure the system to boot.
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135     
   
  Note: Once you have finished installing, follow step 7 article to start on normal startup.
   
  Check if the keyboard works fine when the system is in clean boot.
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Windows Explorer stops working after upgrade to sp2 for newly created folders

  Recently upgraded to Windows Vista SP2. Any new cause of file created Windows Explorer to display error message "Windows Explorer has stopped working" dialog when you try to look at the files in a directory listing.

  Here is an article on the limits that can help you to file naming: http://vlaurie.com/computers2/Articles/filenames.htm.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Samsung SCX4623FW printer, fax, scanner. It worked fine w / WndowsXP. I have recently upgraded to Windows 7

  I have a Samsung SCX4623FW printer, fax, scanner.  It worked fine w / WndowsXP.  I have recently upgraded to Windows 7 w / wireless to the printer.  Now, printer and fax work very well, but no connection to the scanner.  It constantly displays no message no connection available.  Does anyone else have this problem?  Thank you.

  You must install the full features of your cd of the printer software or the Samsung support pages, according to the instructions of samsung

• Recently upgraded to Windows 7 to 10. Now, after the export of an image, I have out of Lightroom before I can work on the module development for another photo. I have the Version of Lightroom 6 CD. Is this a compatibility issue?

  Recently upgraded to Windows 7 to 10. I have Lightroom 6 CD Version Dell PC. Now, after the export of an image, I have out of Lightroom before I can work on the module development for another photo. Is this a compatibility issue? How can I solve this problem? Thanks for any help.

  Lightroom preferences, tab performance.

• How to import emails from Windows mail to Outlook. I have recently upgraded to Windows 7 and want to use Outlook 2002 for email from Windows mail program is no longer usable.

  How to import emails from Windows mail to Outlook.  I have recently upgraded to Windows 7 and want to use Outlook 2002 for email from Windows mail program is no longer usable.

  How to import emails from Windows mail to Outlook.  I have recently upgraded to Windows 7 and want to use Outlook 2002 for email from Windows mail program is no longer usable.

  The following versions of Microsoft Outlook are fully supported on Windows 7;

  • Outlook 2003
  • Outlook 2007
  • Outlook 2010 (when it came out)

  It is recommended to always update your version of Outlook directly after installation to take care of any question of incompatibility which have been corrected.

  Previous versions
  Another version of Outlook is not supported on Windows 7. Although you may install it, any compatibility issues is not corrected. For example;

  • Outlook 2002/XP works on Windows 7, but it has the same problems remember password when using Windows Vista.
  • Outlook 2000 cannot be installed in Internet Mail Only Mode (IMO) and must be installed in company/workgroup (CW Mode) Mode to prevent a mistake wab.dll.

  The info source:
  http://www.MSOutlook.info/question/303

  t-4-2

• I have recently upgraded to windows 10. I need an adobe of 20 characters activation number. Activation of old

  I have recently upgraded to Windows 10.  I need an Adobe of 20 characters activation number.

  The original activation number I consists of 32 digits.

  Adobe Photoshop CS and 10 windows have one conflict with each other.

  When I open CS I get a window to reactivate the product on the net, and every time I

  tried fails. Also there no support phone here in Australia now to get the result above.

  Can someone help me with this please.

  Hi nevillem,

  What exact version of Photoshop Cs do you use?

  Servers of activation for Photoshop version CS2 and less is more works now.

  Please go through this article and install the product error: "Activation Server unavailable". CS2, Acrobat 7, pass a hearing 3

  Serialize using the corresponding serial number (mentioned in the link)

  Kind regards

  Assani

• Can't not copy - paste to work for Workstation Player 12

  Hi all

  I am Windows 7 64 as host with Linux Mint 17.2 as a guest.

  I installed the VMWare tools and have shared between the two, so folder * something * working at least

  However, I can't just managed to copy - paste between host and guest, regardless of the 'management', and what I do...!

  Someone has any advice / tips / ways to debug this issue?

  Thanks in advance!

  Hello

  My bad, managed to miss the little 'Player' in the title of your question.

  Guess I'm still getting used to that the player now also has "Workstation" in the name.

  The parameters of insulation look good.

  VMware Player indeed does not have the characteristic shared virtual machine so it can't be the issue.

  VMware Player must run a process on the guest in order to provide the feature.

  What the output you get when you run:

  PS AX | grep vmware

  In addition what desktop environment are you running Mint?

  In the past, it was supplied via the command vmware-toolbox, this command no longer exists (there is a variant of vmware-toolbox-cmd, but it does not look like it provides copy & paste integration) if I'm not mistaken, this feature is now provided by vmware-user process.

  If the ps-ax above command shows a vmtoolsd process, kill it via the process number and run vmware-user (as a normal user)

  Here is my test of this output:

  $ sudo ps ax | grep vmware
    1514 ?        Ssl    0:00 /usr/sbin/vmware-vmblock-fuse -o subtype=vmware-vmblock,default_permissions,allow_other /var/run/vmblock-fuse
    2301 ?        Sl     0:04 /usr/lib/vmware-tools/sbin64/vmtoolsd -n vmusr --blockFd 3
    2895 pts/4    S+     0:00 grep --color=auto vmware
  ~$ kill 2301
  

  Now test and see if he has been killed correctly:

  ~$ sudo ps ax | grep vmware
    1514 ?        Ssl    0:00 /usr/sbin/vmware-vmblock-fuse -o subtype=vmware-vmblock,default_permissions,allow_other /var/run/vmblock-fuse
    2301 ?        Dl     0:04 /usr/lib/vmware-tools/sbin64/vmtoolsd -n vmusr --blockFd 3
    2898 pts/4    S+     0:00 grep --color=auto vmware
  

  Still there, so I was a little inpatient, seems he needs time to clean properly, IOW do not not a kill-9

  Another try:

  ~$ sudo ps ax | grep vmware
  
    1514 ?        Ssl    0:00 /usr/sbin/vmware-vmblock-fuse -o subtype=vmware-vmblock,default_permissions,allow_other /var/run/vmblock-fuse
    2910 pts/4    S+     0:00 grep --color=auto vmware
  

  Now gone.

  ~$ vmware-user
  ~$ sudo ps ax | grep vmware
    1514 ?        Ssl    0:00 /usr/sbin/vmware-vmblock-fuse -o subtype=vmware-vmblock,default_permissions,allow_other /var/run/vmblock-fuse
    2995 pts/4    S      0:00 /usr/lib/vmware-tools/sbin64/vmtoolsd -n vmusr --blockFd 3
    3022 pts/4    D      0:00 /usr/lib/vmware-tools/sbin64/vmtoolsd -n vmusr --blockFd 3
    3032 pts/4    S+     0:00 grep --color=auto vmware
  

  Commissioning, the list again:

  ~$ sudo ps ax | grep vmware
    1514 ?        Ssl    0:00 /usr/sbin/vmware-vmblock-fuse -o subtype=vmware-vmblock,default_permissions,allow_other /var/run/vmblock-fuse
    2995 pts/4    Rl     0:01 /usr/lib/vmware-tools/sbin64/vmtoolsd -n vmusr --blockFd 3
    3162 pts/4    S+     0:00 grep --color=auto vmware
  

  And the normal demon is now running.

  If the vmtoolsd process is not displayed in the list, then just run vmware-user (yet once just run as a normal user) and it should start the daemon as above.

  Try copy & paste now works.

  --

  Wil

• I have recently upgraded to Windows 10 and it will activate Acrobat 8.1

  I have recently upgraded to Windows 10 and now when I try to run my Acrobat 8.1 he said reactivation is necessary and automatic reactivation does not work.  Can someone telll me why this happened and how can I run my Acrobat 8.1.  I really don't want to go because it has worked well for me.

  Hi Paul,.

  Acrobat 8 is not compatible with windows 10. I would recommend you to upgrade to Acrobat DC - Plans and price | Adobe Acrobat DC

  However, if you continue to try and activate it, you can try Activation offline

  Kind regards

  Rahul

• Apple Software Update will NOT work after upgrading to Windows 7

  Apple Software Update will NOT work after upgrading to Windows 7

  flyboy340 wrote:

  Apple Software Update will NOT work after upgrading to Windows 7

  More information is needed.

  Which machine you use, OS X are you running?

  Windows 7 running in BootCamp?

  The OS X app store is not present at all?

  AppStore is present but the update tab does not?

• Re: NB200-134 - touch FN does not work after upgrade to Windows 7 Ultimate

  My NB200-134 of FN keys does not work after upgrade from Windows 7 starter to Windows 7 ultimate. I tried to install all the drivers found on the Web from Toshiba website for my lappy but it still does not work.

  Help please

  Hi asalamk,

  The FN keys are controlled by value added and Flash Cards Support utility package. I think you forgot to install these tools

  You should recheck the Toshiba page and download these two tools. Start with the installation of the package of added value, and then restart your laptop. After this utility installation of Support Flash Cards. Reboot once again and all the FN buttons should now work correctly.

• Satellite A300D-15B - Webcam does not work after upgrade to Windows 7

  My webcam does not work after upgrade to Windows 7. I installed the drivers but still having no luck

  Hey Buddy,

  What does it mean exactly when you say he won t work?
  You get an error message or only a black image? What model of laptop you have and that you use the Toshiba Windows 7 upgrade kit or a disc of Microsoft?

  At this moment I can only offers to install latest driver of the webcam of the official website of Toshiba. Make sure that this driver is released for Windows 7 and not Vista.