Copy the file on CD - read-only?

Similar Questions

• SE message: changes made to this photo has not been saved. The file may be read-only or you are not allowed to check-in at the location of the photo, trying to crop an image, or mount it

  Original title: photos

  If I try to crop a photo or repair, it has a message of: changes made to this photo has not been saved. The file may be read-only or you may not save to the location of the image.

  They worked very well the other day, what's past?

  Hi boneyardwolf,

  1. where are the photos?

  2. you have any third-party photo editing software?

  3. what type of files you want to change?

  You can check the following link and try the steps suggested by Marilyn - Support Engineer Moderator Wednesday, March 4, 2009 04:47 and see if it helps to solve the problem

  http://social.answers.Microsoft.com/forums/en-us/vistapictures/thread/9f6bf1f8-50EC-4baa-b2c5-212c823ded68

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Word 2007 your AutoCorrect, MSO1033.acl, file could not be saved. The file may be read-only, or you do not have permission to modify the file.

  To get this message when opening Word 2007.

  Your AutoCorrect file, (Japanese weird character? with) MSO1033.acl, could not be saved. The file may be read-only, or you do not have permission to modify the file.

  ALSO when I try to close or save a Word 2007 I get this message:

  Word cannot save or create this file. Make sure that the disk you want to save the file on is not full, write-protected, or damaged. (C:\Program Files\... Normal.dotm)

  I then click on Cancel to not save the changes and then get the following message appears:

  Changes have been made that affect the model overall, Normal. You want to save these changes?

  I click No. in addition to this I'm currently not able to print from word 2007 older that I created a few months before this problem started

  I studied that went through all the troubleshooting steps suggested Microsoft to resolve this issue, but have had no luck... any other help or suggestions would be appreciated. I'm not

  Thank you!!
  Frustrated in minutes

  Install the fixit from article KB2258121 (fixit #50461).

  Although this problem is not mentioned in the KB problem, the fixit indeed solves this problem.

• When you try to put the graphic in the library «the file may be read-only...» »

  Hi all

  I thought that I try the new tools of the CC library.

  But when I want to place a symbol in a library, I get this warning:

  "The file may be read-only or another user can open. Please save the document under a different name or in a different folder. »

  The symbol is on a whole new document, created and recorded by me, and there is no one else around me.

  The funny thing is only economy/add the colors of this symbol in the library is no problem at all.

  Reserving the document does not resolve this issue.

  So what's going on/false?

  Ok

  Thanks the Apple community, I solved this problem.

  Yes, I can add assets to any CC library!

  It has everything to do with permissions.

  This response to my post on the Apple Forum has resolved:

  A link to this post

  Why Adobe can't happen at such a response?

• Save the questions: message error "the file may be read-only.

  I do a lot of scanning to PDF and will often add a page newly digitized to an existing pdf archived and then resave it.

  I have a very consistent workflow and use both screens. The folders that contain the files are still on my second monitor while I work on the main screen.

  After that I inserted the page newly digitized in the existing pdf very often I get an error Impossible to save the file:

  The file may be read-only or another user can open. Please save the document under a different name or in a different folder.

  I'm the only user, none of the files are read-only, and I am sure that the file I'm re-record is not enabled (I see that on my second screen).

  Sometimes, if I click on the second screen to another folder, he'll let re-register me, but other times I have to close the Windows Explorer completely.

  I would avoid renaming of files: it is important to keep the name of the original file.

  This seems to happen a lot more with Acrobat X Pro version 9. It's very embarrassing.

  No known workaround solution?

  DG

  The folders that contain the files are still on my second screen

  In the case of Windows (a Mac user will have to talk about this for the environment).

  If Windows Explorer is "focused" on the file (for example, the file selected) or has the "focus" on the parent or the files folder/directory you get the alert dialog box.

  Close Windows Explorer or place its development d.

  In addition, if the preview feature is used for files in a folder (or in a nested subfolder files) you will experience similar "speed humps" in the path of the workflow.

  Was not always in this way, but the OS updates (XP, Vista, etc.) seem to have given us some clever new options which, by coincidence, there are some pitfalls.

  Be well...

• File placed in Mac server with read/write access to all the world, but when a Windows machine changes and saves the file, it becomes read-only

  Original title: Excel file permissions

  At my work, all except 2 computers are Macs. I'm one of the only Windows machines. I created an Excel file which I want everyone at the office to access and modify. We have put on the Mac server and changed the permissions for everyone to read and write. I also had that done on the Windows machine before placing it on the server. However, people on Mac machines can open, change it and save it without problem. But if one of the machines Windows opens, modifies and saves, it restores the Mac machines to read-only. Anyone know how to fix this?

  Hi amber,

  Please contact the Microsoft Community.

  I would have you post here for further assistance.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Let us know if you have any other problem with Windows in the future.

• I have a problem with all the files and folders on the computer appearing as 'read only '.

  Original title: scourge, each folder and file on each disc are read only and I can't change an any of them

  What happens on my main server. When I choose to change something to read only to normal, he said read only status of disabled, but if I try to change the file or folder I can't change it and if I re - check its properties I find once again, it is read-only. I looged as the admin and I tried everything to put the file or folder read-only point and nothing happening. I plugged a flash drive for only to find that it was read-only.

  Full Scan Virus and there are 10 viruses in my computer, 8 of the virus could be eliminated by removing the leader and two of them were to be eliminated by deleting the infected file.

  The result is that my computer works fine now!

• The file may be read error only when backing up to a network location or desktop computer

  The desktop of Windows 8.1

  Using reader version 11.0

  When you try to save it as a network share or a local disk, I get the error:

  "The file may be read-only or another user can open. Please save the document under a different name or in a different folder. »

  
  

  If I get the name of the file with the PDF at the end of the name, it will save. (something changed I never had to do this before)

  The "Save as type:" is set of files Adobe PDF (*.pdf) drop has no other option

  
  

  
  

  Hi praveenk48941668 ,

  Please check by disabling the protected-mode

  In Adobe, go to Edition-> Preferences-> (protection), uncheck the box enable the Protected-Mode at startup.

  Then, turn off the preview pane of Windows Explorer.

  If the file is located on the drive on the server, please move to the local drive & then check.

  Kind regards

  Christian

• Portege M400: cannot copy the files on the disk HARD - can't see any of my files in Word

  I bought the M400 a few weeks ago. There are a number of problems. Adobe reader gives "an internal error has occurred", manual installation of download gives "error occurred in the file zip", download or copy of the files on the hard disk gives error "there is no space" when there are only 8 gig used from 60 GB. Now, I don't see any of my files in Word.

  I can also copy the files from the cd or DVD. I'm in canada mississauga on Horus, usually resident in the United Kingdom, so I'm in a precarious situation because I can't in my office to sort out the issues.

  Can someone advise me please why all these problems are happening, do I have to use the recovery disk? Baz

  > Forgive me but how to put the hard drive in business.

  I think that the Johnny means that you connect the HARD drive to another computer using the external USB HDD controller. These external USB HDD cases can be purchase in every store of the computer.

  However, if you n t need data that are placed on the HARD drive, you could simply start installing the OS from the recovery CD. This will format the whole HARD drive and install the new operating system as well as all the drivers, utilities and software further.

• ENVY of HP dv7: copy the file fails error on disk 2 to 58% HP recovery

  My hard drive in my dv7 ENVY dies for the second time in two years (it was under warranty last time and I was able to fix). I bought the hard drive same exact (Samsung, 1 TB), tested in BIOS, past everything. When I try to make the image recovery with the HP recovery discs I received the last time my hard drive died, I get an error then that 58% on two recovery disc that says:

  Reducer

  Copy the file fails

  From: d:\preload\base24. STORMWATER MANAGEMENT

  To: c:\RM\Image\BASE24. STORMWATER MANAGEMENT

  Press OK to retry.

  I press OK and it does the same thing over and over again. People who questioned him on this same type of error seem to get anywhere here, but what choice do I have? The hard drive is the same size, same manufacturer, same model, it should have the question of reimage the system on a hard drive more small, right?

  Am I just out of luck on that? So frustrated.

  englejas

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post on recovery issues and wanted to help.
  
  Here is the link to the tool of creation of win8.1 media: installation media to create for Windows - 8.1 help Windows

  Understand, however, you might encounter a problem installing using the media created from this tool.

  You have a version of OEM HP of Win8 installed on your PC, and this means that the product key that is embedded in the motherboard UEFI firmware is OEM, not retail.

  While the media created from this tool SHOULD be activated using this key, there is no guarantee he will do.  If it is not the case, you can use this tool to recover your product key and try to enter it manually: Download Windows OEM Product Key Tool - MajorGeeks

  IF it still does not work, then your only recourse would be to order a new set of recovery from HP discs.

  You can look online for recovery from the paged media related: http://support.hp.com/us-en/drivers
  
  Once there, enter your product name or number. On your software page and download the drivers, select your operating system and version. Click on "Update".  If the HP recovery support is available for your computer, down near the bottom of the page, you will see an entry for the command Recovery Media-CD/DVD/USB. Click on the symbol '+' to expand this entty and click on order to press for more details.
  
  Or, if you prefer, you can do the same by contacting HP Customer Service:
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!

  However, HP customer care is generally not available on weekends, so you will have to wait until Monday to contact them.
  
  Good luck
  
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the symbol of the thumbs-up to the left of the answer key to say thank you.
  If my message solved your problem please click on "Accept as Solution" - to help others to find the solution.
  ========================================================================

• Copy the file fails the Windows 7 recovery discs sent hp

  I have tried to solve this problem for a month now and I'm at the end of my home.
  I am now on my third set of recovery discs HP and all have the same problem. I insert disk 1 by following the instructions on the support forum. She's going through
  Reformat the hard drive windows partition - tick
  Copy of the files needed to restore the hard drive - tick
  And immediately as ending, this window appears:
  Reducer
  Copy the file fails
  From: E:\PRELOAD\BASE. STORMWATER MANAGEMENT
  To: C:\RM\Image\BASE. STORMWATER MANAGEMENT
  Press OK to retry
  
  Three series of drives have the same come.
  What the hell is happening?
  I'm so sick of this.
  
  Read a few other posts with similar problems, but can't seem to find the solution. I don't have an external hard drive, I can use... only the laptop I'm trying to fix. (G6-1305sa)
  
  Any help? It also doesn't help when the HP support is open on the phones until 5:30 from Monday to Friday. I'm at work so can't call. So frustrating...
  
  Aaaarrrrrgggghhhhh

  Hi Belj,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP Pavilion g6-1305sa Notebook and not able to restore Windows. If the HARD drive is faulty, this can cause the restoration should not go well. You can try to run a test of material. Please note remove any and all USB devices and remove the memory card in the slot of the card reader. Disconnect all non-essential devices. What is the original HARD drive? Have you replaced all other parts? Have you tried to do a clean install of Windows 7. Try running sfc/scannow would scan your system to find errors on the command line. You can get to the command prompt by clicking F11 at startup. You can see this Microsoft document on the system recovery options.

  Hope this will help.

  Thank you.

• File.copyTo (result): read-only files

  Hello

  Long story short: I want to copy the files in the directory 'active' of my project (i.e. File.applicationDirectory) in a folder where the user can modify these files (i.e. File.documentsDirectory).

  I use File.copyTo () and it works fine, but the copied files are read-only and the user can modify.

  For a temporary workaround I just read and write FileStream and ByteArray, files but I do not like this solution.

  Any other ideas? This is the expected behavior of copyTo()? Is it possible to change the properties of the file (i.e. to change a read-only to writable file)?

  Thank you.

  I expect that be appropriate behavior because the file was read-only to the assets during conditioning. The permissions of files is a thing of OS, so you can listen to as you did of assets to the shared (instead of use copyTo) area or you can probably create a DONKEY to change permissions. If the files are small, the easiest would be to distribute the file as you said.

• Error message "unable to copy the file"hiberfil", it is used by another person or program." Problem copying content from your PC to external hard drive.

  Original title: problem to copy content from your PC to external hard drive.

  I use Windows XP 2000 and am trying to restore my pc to factory settings as it is continuously 'stick '. When you try to copy my drive "c" on an external drive I get a message saying "unable to copy the file"hiberfil", it is used by another person or program." Close any program that might be using the file and try again "." What is 'hiberfil' and how do I close it down as I am not aware that I use?

  Concerning

  Pete

  The hiberfil.sys will be created every time that you start... If you put in hibernation enabled in your control panel, Power Options and the file is 'open' to think that you can actually choose to Hibernate at any given time.  When you Hibernate XP gives a note of it and will write a hiberfil.sys sometimes important in the c:\ folder so that when XP fires again upwards and returns from hibernation, XP will read the hiberfil.sys file and return to the situation that you were in when you put into hibernation.

  I use to be a chronic hibernant because it takes less time to return after hibernation as a cold start.  Sometimes, it can actually be slower that a cold so start your system based on the amount of RAM has.  The more RAM you have, the more your hiberfil.sys will, if sometimes it's faster to move with just a cold start if you Hibernate (26,03 seconds for me).

  If hiberfil.sys is giving you a hard time (you would not in any way copy it) disable hibernation in your Power Options and the file will be deleted immediately since it would be is no longer necessary.  That would solve this, but if you are trying to copy the entire C drive, you will have other files to complain after that.

  It is certainly possible to make a complete copy of the C drive, if you want, but you will have to initialize on something next to your drive hard if you want to do this so the XP files are not used - then you can copy anything and everything.  You can get some imaging software of disc that will also help you.

  It depends on what the problem is you want to solve and what you wand to end up with when you're done (so far, unspecified).

  I would work on figure our why your XP is paste and fix it in place.  XP should not be sticky.

• Delay of the dialog 'Copy the file' when you drag a file to a folder that already contains.

  Delay of the dialog 'Copy the file' when you drag a file to a folder that already contains.  The dialog box only appears when that I disconnect.  In fact this problem can seriously mislead the user. The file has been copied to or not? This is a serious shortcoming of the operating system.
  A similarly delayed dialog box is to join files on a send to the recipient of the message.

  What is the cause of the delay? Dialog boxes are not under other windows - they break on screen as I log out.

  When I drag AGAIN the same file in the same folder, then I get a message that "the action cannot be completed because the file is open in another program.  (No doubt the program who was trying to copy in the first attempt and waits for a response to the dialog box may not show me!)

  Hardware: Computer laptop Asus M70.  VISTA Ultimate with the latest patches.

  Lorien, thanks for your response.
  A lot of time and effort was exercised in an attempt to find out WHY. I wanted to not just fix the symptoms. It concerned me greatly as a basic function of the operating system does not work. He was not fit for purpose. In the end I found that a third-party application compromised of WINDOWS VISTA 32-bit operating system. If an operating system can not reliably inform the user that an operation is successful or not, it is worthless. In the case above, I didn't move the files was a success (no response required) or the delayed response until I signed.

  In addition to the original problem, there was the following problem: http://social.answers.microsoft.com/Forums/en-US/vistanetworking/thread/24068518-31e0-4b23-823b-d54882792301 where "send to..." 'Recipient' disable the context menu in Explorer for JPG does not or not broken.

  Finally, I figured out the following error had something to do with my problems:

  Description:
  The server {AB8902B4-09CA-4BB6-B78D-A8F59079A8D5} is not registered with DCOM within the required time.
  

  -

  -

   

   10010

   0

   2

   0

   0

   0 x 80000000000000

   

   198817

   

   

   System

   ASUS_M70VM

   

   

  -

   {AB8902B4-09CA-4BB6-B78D-A8F59079A8D5}

   

   

  Arriving in my solution, I was inspired by the following articles http://blogs.technet.com/markrussinovich/archive/2006/08/31/453100.aspx     http://blogs.technet.com/markrussinovich/archive/2006/11/27/532465.aspx
  So I downloaded the MS debug tools and confirmed my suspicion of dllhost.dll using REGEDIT to set debugging on that.
  To cut a long story short, it's DivX 7.2 which caused me grief.  In particular, the file DivXDecH264.ax 'has an access violation - code C0000005 (first chance).  It has been autonomous in DivX Plus DirectShow Filters.     Thus, when it has been deleted (starting other Articles to original install DivX) through Control Panel of configuration/programs and features my system worked perfectly well.

  I know SFA on the architecture of Windows but why was this DivX file loading and cause an access violation whenever I used the windows Explorer?  How an operating system may fail in a basic function of by a third party issue?  There are some newspaper where this access violation was recorded?  It was only possible to identify it in debugging?

  What you fella?

• Micro adapter USB keeps disconnecting when I try to copy the files.

  1 messages
   
   
  Micro adapter USB keeps disconnecting when I try to copy the files.

  Hello

  I have a Micro SD card reader, when I insert my memory card into the reader, he comes and stays there until I try to transfer files to the memory card, or if I run a h2testw test it disconnects.

  Its getting boring, I bought another card reader, but the same problem persists. I tried the drive in my computer and it seems to have worked here, but just on my laptop, I'm having problems.

  Any help will be appreciated, thanks in advance!

  Hello

  1 did you change on your computer?

  2 did you receive an error message?

  I suggest you to check with the other USB port.

  Method 1:

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  Method 2:

  I suggest you to remove and reinstall all USB controllers

  To remove and reinstall all USB controllers, follow these steps:

  (a) click Start, click Run, type sysdm.cpl in the Open box, and then click OK.

  (b) click on the Hardware tab.

  (c) click the Device Manager button.

  (d) expand Bus USB controllers.

  (e) right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  (f) restart the computer and reinstall the USB controllers.

  (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.