Core of the problems file isn't sure what to do

Long story short. Trying to determine if I should give up and replace the hard drive or isolate the problem file of the KERNEL that seems to have (and how to isolate what it is). I have also a problem CHKDSK - whatever. All responses appreciated sincerely. I can follow the instructions, I do not have the expertise of front end many of you.

Regarding the departure until recently, startup is interrupted and a CHKDSK analysis issues/races (don't know what it is any, a hard drive problem. How bad which means that I don't know.) It works through 3 steps for 5 to 10 minutes, then computer gets works well.

Now, yesterday, I did a good computer turn off. This morning, he would not open in Normal mode all suddenly. I opened in Mode safe and found out some programs, my my docs Word GONE reduced to only a few and all desktop icons! At the same time my Norton 360 prompted me that she should be fixed, and I connected directly with their representative to fix it. While Norton performs his Power Eraser (deal virus) the screen turns blue in color and I get the error message full page - I have not copied entirely.

Basically, it says ' problem with the computer, then listed KERNEL_DATA_INPAGE_ERROR.» Near the bottom, it says something about "Dumping physical memory." That's all what I wrote down, unfortunately.

So here I fell - to see that there is a lot of patches and related issues.

QUESTION is what do I do then? Or how can I find more information I post here for help-specific, if it was there.

Thank you for everything that your answer with.

MARK

Hi Mark,

· What is the full error message?

· Did you do changes on the computer before the show?

I suggest you follow the steps described in Microsoft Knowledge Base article and check.

Connect a HDD mode single slave led to the shutdown of the system during recovery from sleep mode

http://support.Microsoft.com/kb/330100

You can also check out the link mentioned below for more information about the error you receive:

Bug Check 0x77: KERNEL_STACK_INPAGE_ERROR

http://msdn.Microsoft.com/en-us/library/ff559197 (v = VS. 85) .aspx

Let us know if that helps.

Tags: Windows

Similar Questions

Impossible to delete the "cannot find the specified file. Be sure to only specify the path and the correct name?

For sum reason my computer just started to do the following when I try and delete a file or move a file from one place to the other.

I am the administrator and the file is there.

Failed to remove "" cannot find the specified file. Be sure to only specify the path name and filre coeerct.

Help!

Perry

Hi KAD Rebar,.
1. Did you the latest changes on the computer?
2. When was the last time it was working fine?
3. Are you having similar problem with all the files you are trying to move or remove it from the computer?
4. You have security software installed on the computer?
Method 1

See the link below and run the Fixit tool available, check if it helps.

Diagnose and repair Windows files and folders problems automatically

http://support.Microsoft.com/mats/windows_file_and_folder_diag/

Method 2

If the previous step fails, then I suggest that you start the computer in safe mode and check if the problem persists.

A description of the options to start in Windows XP Mode

http://support.Microsoft.com/kb/315222

If the problem does not persist in safe mode, then it is possible that some third-party programs installed on the computer is causing the problem.

I suggest that you put the computer in a clean boot state and check if it helps.

To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

See section to learn more about how to clean boot.

How to configure Windows XP to start in a "clean boot" State

http://support.Microsoft.com/kb/310353

Reset the computer to start as usual

When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

(a) click Start, type msconfig in the search box and press ENTER.

(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

(c) under the general tab, click the Normal startup option, and then click OK.

(d) when you are prompted to restart the computer, click on restart.

Help with my computer! All the deleted files, including recovery! What's past and how to fix it?

Hello. So a few days ago I restarted my computer. Literally restarted my computer (turn off then turn onn) because my shortcuts do not work (the .exe would not launch files). I restarted my computer, and when I click on the shortcut, he said that there was no such destination. Soon I relised all my files are gone. I restarted my computer and you press F8 so that I can back to factory State, but the recovery has not worked and now im stuck at the facility because it looks like this: there is no for files recovery. Idk what happened but all my files and I installed software have disappeared. Someone can you please tell me what happened and how can I solve this problem?

100% recovery does not work! Using the computer in safe mode doesn't work.

My system doesn't have a backup of the files. The files just disappeared. All my files actually including the files for recovery. You say I should reinstall my windows using the CD/DVD. If this is the case, I have a problem because I don't have the CD/DVD for her. The paper in my computer box indicates that you must install it in the computer (deleted files). What can I do?

Your system does not have backups of your files/folders for you. It is your duty to implement only or not. If you do not the installer / make backups of your data - so you lose if/when something happens.

(The automatic backup of the system files needed) system restore is enabled by default - but can be disabled by the system administrator.

The "recovery" you used is not a feature of Microsoft or setup - which was created by the computer manufacturer. They decided that it would be more easy/better to put the backup of the system installation media in the same place the user puts all their stuff - on the physical hard disk in the machine. It is destructive or not is determined by the computer manufacturer and they even included a choice (destructive or non-destructive recovery) _ at the time use you it. Each of them has been/is different.

You can contact the manufacturer of the computer and HOPE they always support of recovery for your computer and not you charge (or charge you a large part) to get the media said.

Can read this - it might help:
http://www.ZDNet.com/blog/Bott/lost-your-Windows-discs-how-to-get-replacement-media-legally/4320

How can I solve the problem of slow computer or what nested steps I need to take more things that I mention below to slow computer speed?

Hello

I know that for your computer to start faster, you can disable in msconfig certain applications or auto-start services

I also know that to make your computer faster to do a virtual and half larger than the memory size, more you will need to start it and the value of the same size virtual memory, for example start value 3000 end value3000.

I know also some malicious spyware can slow down your computer.

In addition, you can add more memory to mke your computer more fast, your drive hard must be empty of 25%.

In addition to these things I mentioned before nested thing wat do I check to solve the problem of slow computer?

can you give me some?

Thank you

Johan

The size of the virtual memory required will depend on the type of requests and is influenced by the installed physical memory. The 1.5 times value really applies to computers with a limited amount of ram and the use of virtual will decrease with an increase in physical (but remove never virtual memory altogether) while Shawn says investigate fitting over RAM.

Setting the pagefile identical to max and min values will reduce fragmentation but was so moving to a less actively used by car.

http://TechNet.Microsoft.com/en-us/magazine/ff382717.aspx

The largest suites 'internet security' may have much more impact than the plain simple AV (that's why I use MSE).

By far the biggest kick in performance should be move to the SSD, it reduces by half my boot time.

If a desktop computer fits a discreet graphics card, she discharge the graphic CPU and restores memory used.

As well as Msconfig, check the contents of the process in the Task Manager tab. Most will be perfectly legitimate, but you can identify the odd thief of uninstalled programs.

NOT tempted by claims of speed countless programs available. Rarely, they make a significant difference and can do serious damage.

Download this message when I try to run Lightroom. Point procedure entry AgTransitCargo_pushTransitCargo could not be found in the AgKernel.dll dynamic link library - system: windows 7 64 bit is no error in the log file

Download this message when I try to run Lightroom. The procedure entry point AgTransitCargo_pushTransitCargo could not be found in the AgKernel.dll dynamic link library
system: windows 7 64-bit
There is no error in the log file.
no error in scannow at the command prompt.

Hi Michela,

Lightroom makes a call the the AGkernel.dll file, but the file isn't sure what to do because it can't find the line of code within himself to answer. This can happen for several reasons, that fall within these two broad categories: AGkernel.dll is damaged and must be repaired or AGKernel.dll version is incorrect and should be updated to the correct version.

Here are some things you can do to fix the file:

-Record again with Windows AGKernel.dll: https://support.microsoft.com/en-us/kb/249873

-Windows repair: https://support.microsoft.com/en-us/kb/929833

-Install all the updates that are available for Windows: Windows Installer updates

-Uninstall and reinstall Lightroom

Kind regards

Tanuj

The package files .ko pilot VIB in ESXi

Hello
I hope that this Question can be answered "usually":
I have a few .ko driver files, they come from the Microsoft DSL: Download Linux Integration Services Version 4.1 for Hyper-V to official Microsoft Download Center
I want to try ingerate these drivers on a VIB in the ESXi ISO with the community of packaging tools: VMware experience before: packaging of ESXi community tools
In the first step of "Creation of the TGZ file" im not sure what folder structure I should use.
Is it possible to use .ko files directly in the TGZ Archive or have this drivers to recompile first on linux?

Thanks your help foru.
Michael

Hi Michael,

It's not very clear what you're trying to reach.

Microsoft Linux Integration Services (LIS) must be installed on a Linux VM running on Hyper-V.

Then, you try to run ESXi as a Hyper-v virtual machine?

In the DSL .ko files are the Linux kernel drivers and cannot be used directly on ESXi. If you have their source code available, then you might try to adapt and the re - compile for ESXi (a starting point is here: VMware experience before: how to build devices for ESXi 5.x drivers), but it of a big effort and requires skills 'Linux hacking '.

An alternative is to use the map inherited from Hyper-V for the ESXi VM and install the driver net-tulip on ESXi. To do this, more info is here: https://vibsdepot.v-front.de/wiki/index.php/Net-tulip

-Andreas

Problem saving and loading multiple images in the same file

Hello

I am having a problem, I have a thah program creates a fileOutputSteam and a gzipOutputSteam and finally an imageIO wrote several images, then I do the reverse process, a
FileInputsteam and an inputsteam of gzip, imageIO.read read only image of frist, not the rest.

Can someone help me?
PS: Sorry for my bad English, I'm Spanish

Code:

class Lector {

    // Atributos
    private String ruta;
    private static Collection<Imagen> imagenes;

    /**
     * Clase que carga un fichero .zip lleno de imagenes
     * @param ruta: ruta donde se halla el fichero .zip a cargar
     */
    public Lector(String ruta) {
    }
    /**
     * Constructor sin parametros
     */
    public Lector() {
    }
    /**
     * Metodo que setea el archivo que queremos cargar
     * @param ruta: Ruta del fichero a cargar
     */
    public void setArchivo(String ruta) {
        this.ruta = ruta;
        imagenes = new ArrayList<Imagen>();
    }

    /**
     *
     * @param output: Lugar donde sera representada la salida de la carga de imagenes
     * @return retorna 1 si la carga fue bien y 0 si fue mal
     * @throws FileNotFoundException : excepcion por  no haber encontrado el fichero
     * @throws IOException: excepcion por no poder leer el fichero
     */
    public int cargarImagenes(JTextArea output) throws FileNotFoundException, IOException {
        ZipEntry entrada;
        int contador = 0;
        String archTemp = "temp.jpg";
        FileInputStream fis = new FileInputStream(ruta);
        ZipInputStream zis = new ZipInputStream(new BufferedInputStream(fis));
        BufferedOutputStream dest = null;
        byte[] data = new byte[9000];

        // Leemos secuencialmente el archivo zip
        while ((entrada = zis.getNextEntry()) != null) {
            File bufferTemporal = new File(archTemp);
            System.out.println("Archivo " + entrada.getName() + " cargado!");
            output.append("Archivo " + entrada.getName() + " cargado!\n");
            if (!entrada.isDirectory()) {
                FileOutputStream fos = new FileOutputStream(bufferTemporal);
                dest = new BufferedOutputStream(fos, 9000);

                while ((contador = zis.read(data, 0, 9000)) != -1) {
                    dest.write(data, 0, contador);
                }
                   //Cerramos los buffers
                dest.flush();
                dest.close();
                fos.flush();
                fos.close();

                FileInputStream fin = new FileInputStream(bufferTemporal);
                BufferedImage bi = ImageIO.read(fin);
                //Guardamos el fichero
                imagenes.add(new Imagen(bi, entrada.getName()));
            }
           bufferTemporal.delete();
        }
 
        // Cerramos los bufferes

        fis.close();
        zis.close();

       

        saveAsGzip("dato.gz");
        loadAsGzip("dato.gz");
        return 1;
    }
    /**
     * Funcion que carga la simagenes de dentro del .zip y las guarda en el objeto Imagen
     * @return retorna 1 si la carga fue exitosa
     * @throws FileNotFoundException: Excepcion por no encontrar el archivo
     * @throws IOException: Excepcion por no poder leer el archivo
     */
    public int cargarImagenes() throws FileNotFoundException, IOException {
        ZipEntry entrada;
        int contador = 0;
        String archTemp = "temp.jpg";
        FileInputStream fis = new FileInputStream(ruta);
        ZipInputStream zis = new ZipInputStream(new BufferedInputStream(fis));
        BufferedOutputStream dest = null;
        byte[] data = new byte[9000];

        // Leemos secuencialmente el archivo zip
        while ((entrada = zis.getNextEntry()) != null) {
            File bufferTemporal = new File(archTemp);
            System.out.println("Archivo " + entrada.getName() + " cargado!");

            if (!entrada.isDirectory()) {
                FileOutputStream fos = new FileOutputStream(bufferTemporal);
                dest = new BufferedOutputStream(fos, 9000);

                while ((contador = zis.read(data, 0, 9000)) != -1) {
                    dest.write(data, 0, contador);
                }

                dest.flush();
                dest.close();
                fos.flush();
                fos.close();
                java.io.FileInputStream fin = new FileInputStream(bufferTemporal);
                BufferedImage bi = ImageIO.read(fin);

                imagenes.add(new Imagen(bi, entrada.getName()));
            }
           
        }

        // Cerramos los bufferes
        fis.close();
        zis.close();

        dest.flush();
        dest.close();

        
        return 1;
    }
    /**
     * Funcion que retorna el array de peliculas
     * @return retorna el array de peliculas
     */
    public Collection<Imagen> getImagenes() {
        return imagenes;
    }
    public int saveAsGzip(String pathFichero) throws FileNotFoundException, IOException{

        FileOutputStream fos = new FileOutputStream(new File(pathFichero));
     //GZIPOutputStream gzip = new GZIPOutputStream(fos);
        BufferedImage temp2;
        Imagen img;

        Iterator ite = imagenes.iterator();
        while(ite.hasNext()){
            img = (Imagen) ite.next();
            temp2=img.getBufferedImagen();
            
            boolean i= ImageIO.write(temp2, "JPEG", fos);
            System.out.println(i);

        }
        System.out.println();

        //gzip.finish();
        fos.flush();
         
        fos.close();
       
        //gzip.close();

        return 1;
    }
    public int loadAsGzip(String pathFichero) throws FileNotFoundException, IOException{

        imagenes.clear();
        
        FileInputStream fos = new FileInputStream(new File(pathFichero));
     //GZIPInputStream gzip = new GZIPInputStream(fos);
        BufferedImage img;


            for(int i=0;i<=100; i++){
                

             
                img=ImageIO.read(fos);

                
                if (img != null){System.out.println(img);
                imagenes.add(new Imagen(img, String.valueOf(i)));}
                   
                


        
            }




       // gzip.close();
        fos.close();

        return 1;
    }
}

Published by: sabre150 on October 28, 2010 01:43

Moderator action: added

 tags to source.

805814 wrote:
Oh, sorry again, Ii have commented on all of the code not clear in my best English and posted the image of class:

(sigh) OK, it's an improvement, but it is not yet an NBS! I think it would take me less time to write code that is a NBS that try to explain more (perhaps an example is better here?). In all cases, your code still seems to be mixing the two Zip and GZip. I've never dealt with GZip and could not be disturbed from now just for this problem, so I focused on using the Zip classes.

Try this code:

import java.awt.*;
import java.awt.image.*;
import javax.swing.*;
import javax.imageio.*;
import java.util.*;
import java.util.zip.*;
import java.io.*;

/** SSCCE that demonstrates how to:
1) Create some random images.
2) Store them to a Zip File.
3) Restore them from a Zip File
Please study the code carefully, and note how in a single Java source of less
than 100 lines of code, it manages to achieve the entire demo.!
@author Andrew Thompson */
class StoreImagesAsZip {

    static Random random;
    static int size = 60;

    public static BufferedImage getRandomImage() {
        BufferedImage bi = new BufferedImage(size,size,BufferedImage.TYPE_INT_RGB);

        Graphics2D g = bi.createGraphics();
        GradientPaint gp = new GradientPaint(
            (float)random.nextInt(size),
            (float)random.nextInt(size),
            new Color(random.nextInt(255),random.nextInt(255),random.nextInt(255) ),
            (float)random.nextInt(size),
            (float)random.nextInt(size),
            new Color(random.nextInt(255),random.nextInt(255),random.nextInt(255) )
            );
        g.setPaint(gp);
        g.fillRect(0,0,size,size);

        return bi;
    }

    static public void writeImagesToZip(File file, BufferedImage[] images) throws Exception {
        OutputStream os = new FileOutputStream(file);
        ZipOutputStream zos = new ZipOutputStream(os);
        // Zip does nothing for otherwise compressed media formats such as JPEG and PNG
        zos.setLevel( ZipOutputStream.STORED );

        for (int ii=0; ii< images.length; ii++) {
            ByteArrayOutputStream baos = new ByteArrayOutputStream();
            ImageIO.write(images[ii], "png", baos);

            ZipEntry ze = new ZipEntry( ii + ".png" );
            zos.putNextEntry( ze );
            zos.write( baos.toByteArray() );
            zos.closeEntry();
        }
        zos.flush();
        zos.close();
    }

    static public BufferedImage[] readImagesFromZip(File file) throws Exception {
        ArrayList images = new ArrayList();

        ZipFile zipFile = new ZipFile(file);
        Enumeration en = zipFile.entries();
        while (en.hasMoreElements()) {
            ZipEntry ze = (ZipEntry)en.nextElement();
            InputStream is = zipFile.getInputStream(ze);
            BufferedImage bi = ImageIO.read(is);
            images.add(bi);
        }

        BufferedImage[] imageArray = new BufferedImage[images.size()];
        for (int ii=0; ii


Also note that I now invested a lot of time trying to help you. If you like what I've done, the best way to show that is on the occasion of my responses as "Helpful" or "correct". If the problem is "answered", make sure that mark also.

 
            
            
		     Artifacts when I import the .avi file in After Effects (and first) 
			 Hello
I am having some problems with After Effects I can't understand. I have a video in .avi that loads and plays fine in itself, but when I import to change in After Effects 5.5, I get strange during playback, and even artifacts reflect in the final export. I have the same problem when I try to import and display on the front. I have the sequence corresponding to the video file and even right click the file and interpret the images for the project to match the video file to be sure, but with no success to understand. Can someone tell me what I'm doing wrong here?
I have the same problem as me being on my laptop or desktop. I use Windows 7 on both computers.
By the questions I should ask:
What exact of After Effects version? Include the minor version number - for example, after the CC (12.2.1) effects or After Effects CS6 (11.0.4). Do not just say "After Effects with the latest updates" or "After Effects CC"; give the specific version number. 10.5.0.253
You have installed the latest updates? (If not, you should. They fix a lot of problems). Yes
What operating system? This should include specific minor version numbers, like "Mac OS x 10.6.8" - not just "Mac". Windows 7
If you get error messages, what is the integral of the error message text? No messages.
What you were doing when the problem occurred? What is the right of the steps you take? Import and test ram preview and or rendered. 
He has already worked before? If it worked before doesn't work now, what has changed on your computer in the meantime? First time I tried this.
Tell us about your hardware. Include the type of processor and the number of cores of CPU, amount of RAM installed, GPU, number and size connected monitors, number of hard drives, and how external drives are connected. Intel i5 2500 k 3.3 GHz, 8 GB ram, OS 64 b, 2 monitors, 3 hard disks. Radion AMD 6900
What versions of drivers for your graphics hardware you have installed (including the CUDA driver and driver for graphics card)? 13.12
Do you have any hardware I/O of third parties (e.g., AJA, Matrox, Blackmagic or MOTU)? No
What type (s) of the source footage? When talk of your source footage, tell us about the codecs, not only the types of containers. For example, "H.264 in a .mov container,' not just 'QuickTime '. .avi
You do not have QuickTime installed. (You should). If so, which version? The answer should be specific, such as "QuickTime 7.6.2". Yes, 7.7.5
What other software do you use? No
Do you have the third party effects or the codecs installed? none I know.
Using OpenGL in After Effects features? I think that Yes, he is allowed to.
The problem occurs only with your end result, RAM Preview, or both
? both
Using simultaneous multiple images rendering multiprocessing? no
You use the traced the beam 3D rendering engine? no
If the problem is with the output, give your exact output parameters (make the adjustment and output module settings). Help of screenshots. 2014-11-13_1514 - Tetra84 library
Here's a screenshot of what I'm talking about:
glitch - library of Tetra84
2014-11-13_1514 - Tetra84 library
			 See this thread on the forums of Camtasia in which one of the software engineers Camtasia recommends against the use of the codec TSC2 intended for applications outside their suite:
https://feedback.techsmith.com/TechSmith/topics/avis_created_with_camtasia_studio_8_do_not _play_on_other_computers
I would like to ask on the forums of Camtasia codec, they recommend and how they recommend transcoding your existing TSC2 files.		    
            
            
		     What is the problem with my Media Player? He know connect a burner and restart. 
			 Media player, connect a burner and restart.
			 Hi grandmomof6,
1. have you tried to burn a DVD in Windows media (WMP) Player recently, and then the problem started?
2. what version of WMP is installed on the machine?
Make sure there is no files in Windows Explorer or notification area displays as pending of engraving. If so, delete the cached files, and then try to restart Windows Media Player and check.
a. open Windows Explorer and right click the CD\DVD drive
b. click on open and check if you have an option that some files are waiting to burn or write.
c. If so right click on this option and select Remove.
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit ourMicrosoft answers feedback Forumand let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
		    
            
            
		     Receive error message: the system cannot find the specified file.  C:\Windows\System32\ &#60; LANG_NAME &#62; \mstsc.exe.MUI when I try to use remote desktop. 
			 Remote Desktop error

    

I use Vista Home Premium.  I used to be able to use the remote desktop connection application, but all of a sudden, it stopped working.  When I try to run it I get this message:
_________________
The system cannot find the specified file.
C:\Windows\System32\\mstsc.exe.MUI
_________________

Does anyone have a solution to this problem?  I do not have this file into C:\Windows\System32\en-US\... but perhaps it was corrupted somehow?
Please help me.  Thanks in advance.
			 Hello
It seems that there are a few system files that have trouble.  One of them being mstsc.exe, I wish you find spyware or infection by the virus first, before you try the next step.  Please see the sticky thread in the security forum.  MVP offers some good advice how to remove these problems.
http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/fa30853d-719a-4265-9e7b-9287567d31e3
If everything is clean, we will try a repair installation to replace the problem files and also to ensure that other system files are good.
The 'repair' installation (upgrade on-site) will not affect your installed programs or data.  Just make sure that you are already connected to your computer when you start the installation.  Do not boot from the DVD.
If the installation does not start automatically when you insert the DVD, run setup.exe from your DVD player.
When the Setup program starts and the install now screen, click install now.
Note When you receive the important Get updates for installation message, click go online.
Click upgrade when the which type of installation you want? appears
Please let us know if this solves the problem for you.
Brent
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
		    
            
            
		     Windows has stopped working.  Window is to check a solution to the problem... 
			 I can't open the files in windows and whenever I opened a folder, there will be a pop-up window indicating the windows has stopped working and it checks for a solution to the problem.
			 Hello
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).
----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log

http://support.Microsoft.com/kb/928228
Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista

http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html
==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista

http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista

http://support.Microsoft.com/kb/950685
Optimize the performance of Microsoft Windows Vista

http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).
How to check and change Vista startup programs

http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html
A quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------
Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.

http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx
Autoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.

http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.

http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx
There are many excellent free tools from Sysinternals

http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx
-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.

http://www.NirSoft.NET/utils/what_run_in_startup.html

There are many excellent free tools to NirSoft

    http://www.NirSoft.NET/utils/index.html
Window Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.

    http://www.KarenWare.com/PowerTools/ptwinwatch.asp

Many excellent free tools and an excellent newsletter at Karenware

    http://www.KarenWare.com/
===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.

    http://www.NirSoft.NET/utils/DriverView.html
For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.
Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.
Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)
Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.
Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.
Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.

    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm
How to install a device driver in Vista Device Manager

    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html
If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.
How to disable automatic driver Installation in Windows Vista - drivers

    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx
===========================================

Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.
Problems with the overall speed of the system and performance

    http://support.Microsoft.com/GP/slow_windows_performance/en-us
Performance and Maintenance Tips

    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125
Explorer Windows stopped working

    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3
Hope these helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
		    
            
            
		     The analysis of the dump file support 
			 Hello
I have blue screen problems. My laptop would crash and comes up with blue screen randomly somewhere in the few minutes to start and other times, a couple of hours. I made detailed hard disk check, verification of memory as well as re-installed windows just by formatting the hard drive. Always without success.
What I did is now saved *.dmp file. I'm trying to analyze the same, but not really sure what the problem is. Can someone help and suggest the possible issue. I'm trying to cut and paste the file 'debug' below. I think that I made a correct debugging with my experience as a beginner. If anyone wants I can send *.dmp file also.
Thanks in advance.
Amit.
0: kd > .sympath srv * c:\symbols* http://msdl.microsoft.com/download/symbols
Symbol search path is: srv * c:\symbols* http://msdl.microsoft.com/download/symbols
Expanded the symbol search path is: srv * c:\symbols* http://msdl.microsoft.com/download/symbols
Symbol of validation of the path summary *.
Location of response time (ms)
Deferred srv * c:\symbols* http://msdl.microsoft.com/download/symbols
0: kd > .reload!; analyze - v; lmnt; r; kV. logclose; q
Loading the kernel symbols
...............................................................
................................................................
..............................................
Loading user symbols
Loading unloaded module list
........
WARNING: Unable to verify timestamp for iaStor.sys
ERROR: Module load completed but symbols can be loaded for iaStor.sys
Summary of the symbol load error *.
Name of the module error
iaStor no data are available: srv * c:\symbols* http://msdl.microsoft.com/download/symbols
You can solve most symbol related issues by turning the symbol loading diagnostics (! sym noisy) and repeating the command that caused the symbols to load.
You should also check that your symbol search path (.sympath) is correct.
*******************************************************************************
*                                                                             *
* Bugcheck analysis *.
*                                                                             *
*******************************************************************************
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
It is a very common bugcheck.  Usually the PIN address of exception
the driver/function that caused the problem.  Always note this address
and the date of the picture link / driver that contains this address.
Some common problems are the exception code 0 x 80000003.  This means a hard
coded breakpoint or assertion was hit, but this system has been started
/ /NODEBUG.  It is not supposed to happen as developers should never have
breakpoints coded hard in retail code, but...
In this case, make sure a debugger must be connected and the
system startup/DEBUG.  This will we will see why this breakpoint is
happening.
Arguments:
Arg1: ffffffffc0000005, unhandled exception code
Arg2: fffff8800109c6b0, the address that the exception occurred at
Arg3: fffff8800399e868, address of Exception report
Arg4: fffff8800399e0c0, address of the context record
Debugging information:
------------------
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - the instruction at 0 x % lx 08 referenced memory at 0 x % 08 lx. The memory could not be %s.
FAULTING_IP:
iaStor + 496b 0
fffff880'0109c6b0 488b4d40 mov rcx, qword ptr [rbp + h 40]
EXCEPTION_RECORD: fffff8800399e868-(.exr 0xfffff8800399e868)
. EXR 0xfffff8800399e868
ExceptionAddress: fffff8800109c6b0 (iaStor + 0x00000000000496b0)
ExceptionCode: c0000005 (access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter [0]: 0000000000000000
Parameter [1]: 0000000000000040
Attempt to read from address 0000000000000040
BACKGROUND: fffff8800399e0c0--(.cxr 0xfffff8800399e0c0; r)
. CXR 0xfffff8800399e0c0; r
Rax = 00000000ffffbdfe rbx = fffffa8008c69728 rcx = 0000000000000000
RDX = fffff8800399eac0 rsi = rdi = fffffa8008631bc0 fffffa800b9f8198
RIP = fffff8800109c6b0 rsp = fffff8800399eaa0 rbp = 0000000000000000
R8 = fffffa8008c681c8 r9 = 0000000000000040 r10 = 0000000000004212
R11 = fffff8800399eaf8 r12 = fffffa8006fd20a0 r13 = fffff88001077d38
R14 = 0000000000000000 r15 = fffff88003304f40
iopl = 0 nv up ei pl zr po nc
CS = 0010 ss = 0018 ds = 002 b're = 002 b fs = 0053 gs = 002 b efl = 00010246
iaStor + 0x496b0:
fffff880 '0109c6b0 488b4d40 mov rcx, qword ptr [rbp + 40 h] ss:0018:00000000' 00000040 =?
Last set context:
Rax = 00000000ffffbdfe rbx = fffffa8008c69728 rcx = 0000000000000000
RDX = fffff8800399eac0 rsi = rdi = fffffa8008631bc0 fffffa800b9f8198
RIP = fffff8800109c6b0 rsp = fffff8800399eaa0 rbp = 0000000000000000
R8 = fffffa8008c681c8 r9 = 0000000000000040 r10 = 0000000000004212
R11 = fffff8800399eaf8 r12 = fffffa8006fd20a0 r13 = fffff88001077d38
R14 = 0000000000000000 r15 = fffff88003304f40
iopl = 0 nv up ei pl zr po nc
CS = 0010 ss = 0018 ds = 002 b're = 002 b fs = 0053 gs = 002 b efl = 00010246
iaStor + 0x496b0:
fffff880 '0109c6b0 488b4d40 mov rcx, qword ptr [rbp + 40 h] ss:0018:00000000' 00000040 =?
. CXR
Reset the default scope

CUSTOMER_CRASH_COUNT: 1
Nom_processus: System
CURRENT_IRQL: 0
Error_code: (NTSTATUS) 0xc0000005 - the instruction at 0 x % lx 08 referenced memory at 0 x % 08 lx. The memory could not be %s.
EXCEPTION_PARAMETER1: 0000000000000000
EXCEPTION_PARAMETER2: 0000000000000040
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80002ebb100
GetUlongFromAddress: cannot read fffff80002ebb1c0
0000000000000040 non paged pool
FOLLOWUP_IP:
iaStor + 496b 0
fffff880'0109c6b0 488b4d40 mov rcx, qword ptr [rbp + h 40]
BUGCHECK_STR: 0X7E
DEFAULT_BUCKET_ID: NULL_CLASS_PTR_DEREFERENCE
ANALYSIS_VERSION: 6.3.9600.17336 (debuggers (dbg). 150226-1500) amd64fre
LAST_CONTROL_TRANSFER: from fffffa8008631bc0 to fffff8800109c6b0
STACK_TEXT:
fffff880 '0399eaa0 fffffa80' 08631bc0: fffffa80 ' 0b9f8198 fffffa80 '0b9f8180 fffffa80' 07fa61c8 fffff880 ' 010d0bc8: iaStor + 0x496b0
fffff880 '0399eaa8 fffffa80' 0b9f8198: fffffa80'0b9f8180 fffffa80 '07fa61c8 fffff880' 010d0bc8 00000000' 00000000: 0xfffffa80'08631bc0
fffff880 '0399eab0 fffffa80' 0b9f8180: fffffa80 '07fa61c8 fffff880' 010d0bc8 00000000'00000000 00000000'00000000: 0xfffffa80'0b9f8198
fffff880 '0399eab8 fffffa80' 07fa61c8: fffff880 '010d0bc8 00000000'00000000 00000000'00000000 fffff880' 0399eb50: 0xfffffa80'0b9f8180
fffff880 '0399eac0 fffff880' 010d0bc8: 00000000'00000000 00000000'00000000 fffff880 '0399eb50 fffffa80' ffffbdfe: 0xfffffa80'07fa61c8
fffff880 '0399eac8 00000000' 00000000: 00000000 00000000 "fffff880 '0399eb50 fffffa80' ffffbdfe 00000000'00000030: iaStor + 0x7dbc8
SYMBOL_STACK_INDEX: 0
SYMBOL_NAME: iaStor + 496b 0
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: iaStor
Nom_image: iaStor.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4f29d59c
STACK_COMMAND: .cxr 0xfffff8800399e0c0; Ko
FAILURE_BUCKET_ID: X64_0x7E_iaStor + 496b 0
BUCKET_ID: X64_0x7E_iaStor + 496b 0
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:x64_0x7e_iastor + 496 b 0
FAILURE_ID_HASH: {638824e4-df44-4f6b-5214-69c6687e1463}
Follow-up: MachineOwner
---------
Rax = 00000000ffffbdfe rbx = fffffa8008c69728 rcx = 0000000000000000
RDX = fffff8800399eac0 rsi = rdi = fffffa8008631bc0 fffffa800b9f8198
RIP = fffff8800109c6b0 rsp = fffff8800399eaa0 rbp = 0000000000000000
R8 = fffffa8008c681c8 r9 = 0000000000000040 r10 = 0000000000004212
R11 = fffff8800399eaf8 r12 = fffffa8006fd20a0 r13 = fffff88001077d38
R14 = 0000000000000000 r15 = fffff88003304f40
iopl = 0 nv up ei pl zr po nc
CS = 0010 ss = 0018 ds = 002 b're = 002 b fs = 0053 gs = 002 b efl = 00010246
iaStor + 0x496b0:
fffff880 '0109c6b0 488b4d40 mov rcx, qword ptr [rbp + 40 h] ss:0018:00000000' 00000040 =?
Child-SP RetAddr: Args to child: call Site
fffff880 '0399eaa0 fffffa80' 08631bc0: fffffa80 ' 0b9f8198 fffffa80 '0b9f8180 fffffa80' 07fa61c8 fffff880 ' 010d0bc8: iaStor + 0x496b0
fffff880 '0399eaa8 fffffa80' 0b9f8198: fffffa80'0b9f8180 fffffa80 '07fa61c8 fffff880' 010d0bc8 00000000' 00000000: 0xfffffa80'08631bc0
fffff880 '0399eab0 fffffa80' 0b9f8180: fffffa80 '07fa61c8 fffff880' 010d0bc8 00000000'00000000 00000000'00000000: 0xfffffa80'0b9f8198
fffff880 '0399eab8 fffffa80' 07fa61c8: fffff880 '010d0bc8 00000000'00000000 00000000'00000000 fffff880' 0399eb50: 0xfffffa80'0b9f8180
fffff880 '0399eac0 fffff880' 010d0bc8: 00000000'00000000 00000000'00000000 fffff880 '0399eb50 fffffa80' ffffbdfe: 0xfffffa80'07fa61c8
fffff880 '0399eac8 00000000' 00000000: 00000000 00000000 "fffff880 '0399eb50 fffffa80' ffffbdfe 00000000'00000030: iaStor + 0x7dbc8
start end module name
fffff800 '00b9c000 fffff800' 00ba6000 kdcom kdcom.dll Sam Feb 05 10:52:49 2011 (4D4D8061)
fffff800 '02c0c000 fffff800' 031f5000 nt ntkrnlmp.exe Wed Jun 22 21:53:23 2011 (4E02AAA3)
fffff800 '031f5000 fffff800' 0323e000 hal hal.dll Sat Nov 20 07:00:25 2010 (4CE7C669)
"fffff880 ' 00 c 00000 fffff880 ' 00c5c000 volmgrx volmgrx.sys Sat Nov 20 03:20:43 2010 (4CE792EB)
fffff880'00c5c000 fffff880'00 c 76000 mountmgr mountmgr.sys Sat Nov 20 03:19:21 2010 (4CE79299)
"fffff880 ' 00 c 90000 fffff880 ' 00cdf000 mcupdate_GenuineIntel mcupdate_GenuineIntel.dll Sat Nov 20 07:03:51 2010 (4CE7C737)
fffff880 '00cdf000 fffff880' 00cf3000 PSHED PSHED.dll Fri Jul 13 20:32:23 2009 (4A5BE027)
fffff880'00cf3000 fffff880'00 d 51000 CLFS CLFS. SYS MON Jul 13 18:19:57 2009 (4A5BC11D)
fffff880 '00 d 51000 fffff880' 00 d 84000 pci pci.sys Sat Nov 20 03:19:11 2010 (4CE7928F)
fffff880 '00 d 84000 fffff880' 00 d 99000 partmgr partmgr.sys Sat Nov 20 03:20 2010 (4CE792C0)
"fffff880 ' 00 d 99000 fffff880 ' 00da5000 BATTC BATTC. SYS MON Jul 13 18:31:01 2009 (4A5BC3B5)
fffff880 '00da5000 fffff880' 00dba000 volmgr volmgr.sys Sat Nov 20 03:19:28 2010 (4CE792A0)
fffff880 '00e01000 fffff880' 00ec1000 CI CI.dll Sat Nov 20 07:12:36 2010 (4CE7C944)
fffff880 '00ec1000 fffff880' 00f65000 Wdf01000 Wdf01000.sys MON Jul 13 18:22:07 2009 (4A5BC19F)
fffff880 '00f65000 fffff880' 00f74000 WDFLDR WDFLDR. SYS MON Jul 13 18:19:54 2009 (4A5BC11A)
fffff880 '00f74000 fffff880' 00fcb000 ACPI ACPI.sys Sat Nov 20 03:19:16 2010 (4CE79294)
fffff880 '00fcb000 fffff880' 00fd4000 WMILIB WMILIB. SYS MON Jul 13 18:19:51 2009 (4A5BC117)
fffff880 '00fd4000 fffff880' 00fde000 msisadrv msisadrv.sys MON Jul 13 18:19:26 2009 (4A5BC0FE)
fffff880'00fde000 fffff880'00 Feb vdrvroot 000 vdrvroot.sys MON Jul 13 19:01:31 2009 (4A5BCADB)
fffff880 Feb 00'000 fffff880'00ff4000 iusb3hcs iusb3hcs.sys Fri Jan 27 03:37:23 2012 (4F227053)
fffff880 '00ff4000 fffff880' 00ffd000 compbatt compbatt.sys Fri Jul 13 18:31:02 2009 (4A5BC3B6)
fffff880 ' 01000000 fffff880' b 0100 000 amdxata amdxata.sys Fri Mar 19 11:18:18 2010 (4BA3A3CA)
fffff880 ' 01053000 fffff880' 013f7000 iaStor, iaStor.sys Wed Feb 01 18:15:24 2012 (4F29D59C)
fffff880 '01400000 fffff880' 01472000 NMC cng.sys Wed Nov 16 22:23:17 2011 (4EC48C35)
fffff880 ' 01472000 fffff880' 014cf000 iusb3hub iusb3hub.sys Fri Jan 27 03:35:25 2012 (4F226FDD)
fffff880 '014ef000 fffff880' 0153b 000 fltmgr fltmgr.sys Sat Nov 20 03:19:24 2010 (4CE7929C)
fffff880 '0153b 000 fffff880' 0154f000 fileinfo fileinfo.sys MON Jul 13 18:34:25 2009 (4A5BC481)
fffff880 '0154f000 fffff880' 015ad000 msrpc msrpc.sys Sat Nov 20 03:21:56 2010 (4CE79334)
fffff880 '01620000 fffff880' 017c 3000 Ntfs Ntfs.sys Thu Mar 10 21:39:39 2011 (4D79997B)
"fffff880 ' 017 c 3000 fffff880 ' 017de000 ksecdd ksecdd.sys Wed Nov 16 21:48:13 2011 (4EC483FD)
fffff880 '017de000 fffff880' 017ef000 pcw pcw.sys MON Jul 13 18:19:27 2009 (4A5BC0FF)
fffff880 '017ef000 fffff880' 017f9000 Fs_Rec Fs_Rec.sys MON Jul 13 18:19:45 2009 (4A5BC111)
fffff880 ' 01800000 fffff880' 01822000 tdx tdx.sys Sat Nov 20 03:21:54 2010 (4CE79332)
fffff880 ' 01822000 fffff880' 01848000 tunnel tunnel.sys Sat Nov 20 04:51:50 2010 (4CE7A846)
fffff880 ' 01875000 fffff880' 01968000 ndis ndis.sys Wed Dec 29 00:16:18 2010 (4D1AD232)
fffff880 '01968000 fffff880' 019c NETIO NETIO 8000. SYS Sat Nov 20 03:23:13 2010 (4CE79381)
"fffff880 ' 019 c 8000 fffff880 ' 019f3000 ksecpkg ksecpkg.sys Wed Nov 16 22:23:44 2011 (4EC48C50)
fffff880 '01 a 00000 fffff880' 01a0d000 TDI TDI. SYS Sat Nov 20 03:22:06 2010 (4CE7933E)
fffff880 '01a0d000 fffff880' 01a1e000 blbdrive blbdrive.sys Fri Jul 13 18:35:59 2009 (4A5BC4DF)
fffff880'01 has 21000 fffff880'01 c 25000 tcpip tcpip.sys Wed Sep 28 22:43:04 2011 (4E83E948)
"fffff880 ' 01 c 25000 fffff880 ' 01c6f000 c:\windows\system32\drivers\fwpkclnt fwpkclnt.sys Sat Nov 20 03:21:37 2010 (4CE79321)
fffff880 '01c6f000 fffff880' 01b 77000 WD wd.sys MON Jul 13 18:19:55 2009 (4A5BC11B)
"fffff880 ' 01 c 77000 fffff880 ' 01cc3000 volsnap volsnap.sys Thu Feb 24 21:38:18 2011 (4D67242A)
fffff880 '01cc3000 fffff880' 01ccb000 spldr spldr.sys Mon May 11 11:56:27 2009 (4A0858BB)
fffff880 '01ccb000 fffff880' 01 05000 rdyboost rdyboost.sys Sat Nov 20 03:43:10 2010 (4CE7982E)
fffff880 '01 d 05000 fffff880' 01 17000 mup mup.sys MON Jul 13 18:23:45 2009 (4A5BC201)
fffff880 '01 d 17000 fffff880' 01 20000 hwpolicy hwpolicy.sys Sat Nov 20 03:18:54 2010 (4CE7927E)
"fffff880 ' 01 d 20000 fffff880 ' 01d2a000 hpdskflt hpdskflt.sys Wed Feb 22 10:30:18 2012 (4F45181A)
fffff880 '01d2a000 fffff880' 01 64000 fvevol fvevol.sys Sat Nov 20 03:24:06 2010 (4CE793B6)
"fffff880 ' 01 d 64000 fffff880 ' 01d7a000 disk disk.sys MON Jul 13 18:19:57 2009 (4A5BC11D)
fffff880 '01d7a000 fffff880' 01daa000 CLASSPNP CLASSPNP. SYS Sat Nov 20 03:19:23 2010 (4CE7929B)
fffff880 '01db8000 fffff880' 01dc8000 dog of guard watchdog.sys MON Jul 13 18:37:35 2009 (4A5BC53F)
fffff880 '01dc8000 fffff880' 01dd1000 RDPCDD system32\drivers\rdpcdd.sys MON Jul 13 19:16:34 2009 (4A5BCE62)
fffff880 '01dd1000 fffff880' 01dda000 rdpencdd rdpencdd.sys Fri Jul 13 19:16:34 2009 (4A5BCE62)
fffff880 '01dda000 fffff880' 01de3000 rdprefmp rdprefmp.sys Fri Jul 13 19:16:35 2009 (4A5BCE63)
fffff880 '01de3000 fffff880' 01dee000 Msfs Msfs.SYS MON Jul 13 18:19:47 2009 (4A5BC113)
fffff880 '01dee000 fffff880' 01dff000 Npfs.SYS NPH MON Jul 13 18:19:48 2009 (4A5BC114)
fffff880'0281 b 000 fffff880'02933000 btwampfl btwampfl.sys Thu Jan 05 17:14:07 2012 (4F062EBF)
fffff880 ' 02933000 fffff880' 0293 b 080 HIDPARSE HIDPARSE. SYS MON Jul 13 19:06:17 2009 (4A5BCBF9)
fffff880 ' 0293 c 000 fffff880' 02954000 BTHUSB BTHUSB.sys Wed Apr 27 22:54:56 2011 (4DB8E510)
fffff880 ' 02954000 fffff880' 029e0000 bthport BTHUSB Device bthport.sys Wed Apr 27 22:55:07 2011 (4DB8E51B)
fffff880 '029e0000 fffff880' 029ee000 monitor monitor.sys MON Jul 13 18:38:52 2009 (4A5BC58C)
fffff880 '029ee000 fffff880' 029fe000 BthEnum BthEnum.sys Fri Jul 13 19:06:52 2009 (4A5BCC1C)
fffff880 '02-00000 fffff880' 02 has 53000 nwifi nwifi.sys Fri Jul 13 19:07:23 2009 (4A5BCC3B)
fffff880 '02-53000 fffff880' 02a 66000 o ndisuio ndisuio.sys Sat Nov 20 04:50:08 2010 (4CE7A7E0)
fffff880 '02-66000 fffff880' 02a7e000 rspndr rspndr.sys Fri Jul 13 19:08:50 2009 (4A5BCC92)
fffff880 '02a8b000 fffff880' 02af3000 btwavdt btwavdt.sys Wed Dec 14 15:30:32 2011 (4EE91578)
fffff880 '02af3000 fffff880' 02b4f000 btwaudio btwaudio.sys Thu Jan 05 18:43:37 2012 (4F0643B9)
fffff880 '02b4f000 fffff880' 02b5d000 btwl2cap btwl2cap.sys Saturday August 27 at 17:58:52 2011 (4E5976AC)
fffff880 '02b5d000 fffff880' 02b 79000 btwdpan btwdpan.sys Fri Sep 16 18:01:54 2011 (4E73D562)
fffff880 '02b 79000 fffff880' 02b7ca00 btwrchid btwrchid.sys Wed Dec 14 15:31:21 2011 (4EE915A9)
fffff880 '02b7d000 fffff880' 02b 96000 HIDCLASS HIDCLASS. SYS sat 20 Nov 04:43:49 2010 (4CE7A665)
fffff880 '02b 96000 fffff880' 02bb9000 luafv luafv.sys Fri Jul 13 18:26:13 2009 (4A5BC295)
fffff880 '02bb9000 fffff880' 02bce000 lltdio lltdio.sys Fri Jul 13 19:08:50 2009 (4A5BCC92)
fffff880 ' 03000000 fffff880' 0300f000 netbios netbios.sys MON Jul 13 19:09:26 2009 (4A5BCCB6)
fffff880 '0300f000 fffff880' 0302a 000 wanarp wanarp.sys Sat Nov 20 04:52:36 2010 (4CE7A874)
fffff880 '0302-000 fffff880' 0303e000 termdd termdd.sys Sat Nov 20 05:03:40 2010 (4CE7AB0C)
fffff880 '0303e000 fffff880' 0308f000 rdbss rdbss.sys Sat Nov 20 03:27:51 2010 (4CE79497)
fffff880 '0308f000 fffff880' 0309b 000 nsiproxy nsiproxy.sys Fri Jul 13 18:21:02 2009 (4A5BC15E)
fffff880 '0309b 000 fffff880' 030a 6000 mssmbios mssmbios.sys Fri Jul 13 10:31:18 2009 (4A5BC3BE)
fffff880 '030-6000 fffff880' 030b 5000 discache discache.sys Fri Jul 13 18:37:18 2009 (4A5BC52E)
fffff880'030 b 5000 fffff880'030 d 3000 dfsc dfsc.sys Sat Nov 20 03:26:31 2010 (4CE79447)
fffff880'030e0000 fffff880'03169000 afd afd.sys Sun Apr 24 21:33:58 2011 (4DB4DD96)
fffff880 ' 03169000 fffff880' 031ae000 netbt netbt.sys Sat Nov 20 03:23:18 2010 (4CE79386)
fffff880 '031ae000 fffff880' 031b 7000 wfplwf wfplwf.sys Fri Jul 13 19:09:26 2009 (4A5BCCB6)
fffff880 '031b 7000 fffff880' 031dd000 pacer pacer.sys Sat Nov 20 04:52:18 2010 (4CE7A862)
fffff880 '031dd000 fffff880' 031f3000 vwififlt vwififlt.sys Fri Jul 13 19:07:22 2009 (4A5BCC3A)
fffff880 '03e00000 fffff880' 03e24000 HDAudBus HDAudBus.sys Sat Nov 20 04:43:42 2010 (4CE7A65E)
fffff880 '03e24000 fffff880' 03e70000 RtsBaStor RtsBaStor.sys Fri Dec 28 00:58:29 2011 (4EFABE15)
fffff880 '03e70000 fffff880' 03e9c000 rfcomm rfcomm.sys MON Jul 13 19:06:56 2009 (4A5BCC20)
fffff880 '03ebb000 fffff880' 03f7f000 iusb3xhc iusb3xhc.sys Fri Jan 27 03:35:28 2012 (4F226FE0)
fffff880 '03f7f000 fffff880' 03f80f00 USBD USBD. SYS sat Nov 04 22:43:53 2011 (4EB4B0F9)
fffff880 '03f81000 fffff880' 03f92000 HECIx64 HECIx64.sys Wed Nov 09 18:52:25 2011 (4EBB2049)
fffff880 '03f92000 fffff880' 03fa3000 usbehci usbehci.sys Fri Nov 04 22:43:56 2011 (4EB4B0FC)
fffff880 '03fa3000 fffff880' 03ff9000 USBPORT USBPORT. SYS sat Nov 04 22:44:03 2011 (4EB4B103)
fffff880 ' 04400000 fffff880' 04409000 Null Null.SYS MON Jul 13 18:19:37 2009 (4A5BC109)
fffff880 ' 04409000 fffff880' 04410000 a Bleep c:\windows\system32\drivers\beep.sys MON Jul 13 19:00:13 2009 (4A5BCA8D)
fffff880 ' 04410000 fffff880' 0441e000 vga vga.sys MON Jul 13 18:38:47 2009 (4A5BC587)
fffff880'0441e000 fffff880'047 c 2000 dump_iaStor dump_iaStor.sys Wed Feb 01 18:15:24 2012 (4F29D59C)
"fffff880 ' 047 d 6000 fffff880 ' 047fb000 VIDEOPRT VIDEOPRT. SYS MON Jul 13 18:38:51 2009 (4A5BC58B)
fffff880 ' 04800000 fffff880' 0481 b 000 raspppoe raspppoe.sys MON Jul 13 19:10:17 2009 (4A5BCCE9)
fffff880'0481 b 000 fffff880'0483 c 000 raspptp raspptp.sys Sat Nov 20 04:52:31 2010 (4CE7A86F)
fffff880 ' 0483 c 000 fffff880' 04856000 rassstp rassstp.sys Fri Jul 13 19:10:25 2009 (4A5BCCF1)
fffff880 ' 04856000 fffff880' 04868000 umbus umbus.sys Sat Nov 20 04:44:37 2010 (4CE7A695)
fffff880 '04868000 fffff880' 048c 2000 usbhub usbhub.sys Fri Nov 04 22:44:27 2011 (4EB4B11B)
fffff880 '048 c 2000 fffff880' 048d 7000 NDProxy NDProxy.SYS Sat Nov 20 04:52:20 2010 (4CE7A864)
fffff880'048f8000 fffff880'04998000 Rt64win7 Rt64win7.sys kills Sep 27 09:50:33 2011 (4E81E2B9)
fffff880 ' 04998000 fffff880' 049bc000 rasl2tp rasl2tp.sys Sat Nov 20 04:52:34 2010 (4CE7A872)
fffff880'049bc000 fffff880'049 c 8000 ndistapi ndistapi.sys MON Jul 13 19:10 2009 (4A5BCCD8)
"fffff880 ' 049 c 8000 fffff880 ' 049f7000 ndiswan ndiswan.sys Sat Nov 20 04:52:32 2010 (4CE7A870)
fffff880 '04-00000 fffff880' 04 has 24000 mrxsmb20 mrxsmb20.sys kills Apr 26 21:39:37 2011 (4DB781E9)
fffff880 '04-76000 fffff880' 04b3f000 HTTP HTTP.sys Sat Nov 20 03:24:30 2010 (4CE793CE)
fffff880 '04b3f000 fffff880' 04b5d000 bowser bowser.sys kills Feb 22 22:55:04 (4 649328) 2011
fffff880 '04b5d000 fffff880' 04b 75000 mpsdrv mpsdrv.sys Fri Jul 13 19:08:25 2009 (4A5BCC79)
fffff880 '04b 75000 fffff880' 04ba2000 mrxsmb mrxsmb.sys kills Apr 26 21:40:38 2011 (4DB78226)
fffff880 '04ba2000 fffff880' 04bf0000 mrxsmb10 mrxsmb10.sys Fri Jul 08 21:46:28 2011 (4E17C104)
"fffff880 ' 04 c 00000 fffff880 ' 04c6e000 SynTP SynTP.sys Thu Mar 01 18:33:26 2012 (4F501556)
fffff880 '04c6e000 fffff880' 04c7d000 mouclass mouclass.sys MON Jul 13 18:19:50 2009 (4A5BC116)
fffff880 '04c7d000 fffff880' 04c 81500 CmBatt CmBatt.sys Fri Jul 13 18:31:03 2009 (4A5BC3B7)
"fffff880 ' 04 c 82000 fffff880 ' 04c8d000 Smb_driver Smb_driver.sys Sat Mar 01 18:34:33 2012 (4F501599)
fffff880 '04c8d000 fffff880' 04c9a000 accelerometer Accelerometer.sys Wed Feb 22 10:30:18 2012 (4F45181A)
fffff880 '04c9a000 fffff880' 04ca 3000 wmiacpi wmiacpi.sys Fri Jul 13 18:31:02 2009 (4A5BC3B6)
fffff880 '04ca 3000 fffff880' 04cb9000 driver intelppm.sys MON Jul 13 18:19:25 2009 (4A5BC0FD)
fffff880 '04cb9000 fffff880' 04cc4000 irstrtdv irstrtdv.sys Wed Jun 15 13:52:49 2011 (4DF8FF81)
fffff880'04cc4000 fffff880'04 cd 4000 CompositeBus CompositeBus.sys Sat Nov 20 04:33:17 2010 (4CE7A3ED)
fffff880 ' 04 cd 4000 fffff880' 04cd9f80 clwvd clwvd.sys kills Jul 27 20:13:47 2010 (4C4F844B)
fffff880 '04cda000 fffff880' 04cdf200 ksthunk ksthunk.sys Fri Jul 13 19:00:19 2009 (4A5BCA93)
fffff880 '04ce0000 fffff880' 04cf6000 AgileVpn AgileVpn.sys Fri Jul 13 19:10:24 2009 (4A5BCCF0)
fffff880 '04cf6000 fffff880' 04cf7480 swenum swenum.sys MON Jul 13 19:00:18 2009 (4A5BCA92)
fffff880'04cf9000 fffff880'05183000 bcmwl664 bcmwl664.sys Wed Sep 26 21:45:09 2011 (4EA8C5B5)
fffff880 ' 05183000 fffff880' 05190000 vwifibus vwifibus.sys Fri Jul 13 19:07:21 2009 (4A5BCC39)
fffff880 ' 05190000 fffff880' 051ae000 i8042prt i8042prt.sys MON Jul 13 18:19:57 2009 (4A5BC11D)
fffff880 '051ae000 fffff880' 051bd000 kbdclass kbdclass.sys MON Jul 13 18:19:50 2009 (4A5BC116)
fffff880'051bd000 fffff880'05200000 ks ks.sys Sat Nov 20 04:33:23 2010 (4CE7A3F3)
fffff880 ' 05600000 fffff880' 05656000 IntcDAud IntcDAud.sys kills Dec 06 05:23:07 2011 (4EDDFB1B)
fffff880 ' 05656000 fffff880' 05662000 Dxapi Dxapi.sys Fri Jul 13 18:38:28 2009 (4A5BC574)
fffff880 ' 05662000 fffff880' 05670000 crashdmp crashdmp.sys Fri Jul 13 19:01:01 2009 (4A5BCABD)
fffff880 ' 05670000 fffff880' 05683000 dump_dumpfve dump_dumpfve.sys Fri Jul 13 18:21:51 2009 (4A5BC18F)
fffff880 ' 05683000 fffff880' 056 a 0000 usbccgp usbccgp.sys Fri Nov 04 22:44:06 2011 (4EB4B106)
fffff880'056 has 0000 fffff880'056 cd 280 usbvideo usbvideo.sys Sat Nov 20 04:44:34 2010 (4CE7A692)
fffff880 '056e6000 fffff880' 0576e000 stwrt64 stwrt64.sys Mon Feb 13 22:26:45 2012 (4F39E285)
fffff880 '0576e000 fffff880' 057ab000 portcls portcls.sys MON Jul 13 19:06:27 2009 (4A5BCC03)
fffff880'057ab000 fffff880'057 cd 000 drmk drmk.sys MON Jul 13 20:01:25 2009 (4A5BD8E5)
fffff880 ' 057 cd 000 fffff880' 057f9000 bcbtums bcbtums.sys Thu Jan 26 12:49:03 2012 (4F21A01F)
fffff880 '05e67000 fffff880' 05f0d000 peauth peauth.sys Fri Jul 13 20:01:19 2009 (4A5BD8DF)
fffff880 '05f0d000 fffff880' 05f18000 secdrv secdrv. SYS kills Sep 13 08:18:38 2006 (4508052E)
fffff880 '05f18000 fffff880' 05f49000 srvnet c:\windows\system32\drivers\srvnet.sys Thu Apr 28 22:05:35 2011 (4DBA2AFF)
fffff880 '05f49000 fffff880' 05f5b000 tcpipreg c:\windows\system32\drivers\tcpipreg.sys Sat Nov 20 04:51:48 2010 (4CE7A844)
fffff880'05f5b000 fffff880'05 fc 4000 srv2 srv2.sys Thu Apr 28 22:05:46 2011 (4DBA2B0A)
fffff880 ' 06069000 fffff880' 06101000 srv srv.sys Thu Apr 28 22:06:06 2011 (4DBA2B1E)
fffff880 ' 06101000 fffff880' 06122000 WudfPf WudfPf.sys Sat Nov 20 04:42:44 2010 (4CE7A624)
fffff880 ' 06122000 fffff880' 06193000 SYMDS64 SYMDS64. SYS Mon May 16 17:15:03 2011 (4DD1A1E7)
fffff880 '06193000 fffff880' 061c 1000 ccSetx64 ccSetx64.sys Fri Nov 04 17:05:25 2011 (4EB461A5)
fffff880 ' 07895000 fffff880' 079 a 6000 SYMEFA64 SYMEFA64. SYS Tue 22 Nov 18:49:28 2011 (4ECC4318)
fffff880 ' 08400000 fffff880' 08431000 Ironx64 Ironx64.SYS Mon Nov 14 20:00:53 2011 (4EC1C7D5)
fffff880 ' 08431000 fffff880' 084e8000 Sftfslh Sftfslh.sys Wed Dec 02 18:55:48 2009 (4B170C94)
fffff880'0853f000 fffff880'08577000 SYMEVENT64x86 SYMEVENT64x86.SYS kills Nov 22 12:30:48 2011 (4ECBEA58)
fffff880 ' 08577000 fffff880' 0858 c 000 SRTSPX64 SRTSPX64. SYS Tue Nov 22 17:52:20 2011 (4ECC35B4)
"fffff880 ' 0858 c 000 fffff880 ' 085f8000 SYMNETS SYMNETS. SYS sat 12 Nov 15:11:53 2011 (4EBEE119)
fffff880 ' 08689000 fffff880' 087 a 8000 BHDrvx64 BHDrvx64.sys Wed Nov 23 13:32:10 2011 (4ECD4A3A)
fffff880 '087-8000 fffff880' 087f5000 Sftplaylh Sftplaylh.sys Wed Dec 02 18:55:40 2009 (4B170C8C)
fffff880 '08-00000 fffff880' 08a7d000 IDSVia64 IDSVia64.sys kills Nov 22 14:23:23 2011 (4ECC04BB)
fffff880 '08ac9000 fffff880' 08ad4000 Sftvollh Sftvollh.sys Wed Dec 02 18:55:23 2009 (4B170C7B)
fffff880 '08ad4000 fffff880' 08adf000 Sftredirlh Sftredirlh.sys Wed Dec 02 18:55:52 2009 (4B170C98)
fffff880 '08af3000 fffff880' 08bb2000 SRTSP64 SRTSP64. SYS Tue Nov 22 17:52:13 2011 (4ECC35AD)
fffff880 '08bb2000 fffff880' 08bd2000 ENG64 ENG64. SYS Fri Jul 29 08:17:51 2011 (4E32B2FF)
"fffff880 ' 08 c 04000 fffff880 ' 08dfc000 EX64 EX64. SYS Fri Jul 29 08:15:11 2011 (4E32B25F)
fffff880 '0f452000 fffff880' 10254f80 igdkmd64 igdkmd64.sys kills Feb 14 12:47:30 2012 (4F3AAC42)
fffff880 ' 10255000 fffff880' 1028 b 000 fastfat fastfat. SYS MON Jul 13 18:23:28 2009 (4A5BC1F0)
fffff880'1028 b 000 fffff880'10380000 dxgkrnl dxgkrnl.sys Mon Aug 22 21:54:11 2011 (4E531653)
fffff880 '10380000 fffff880' 103c 6000 dxgmms1 dxgmms1.sys Mon Aug 22 21:53:14 2011 (4E53161A)
fffff960 '000e0000 fffff960' 003f4000 win32k win32k.sys unavailable (00000000)
fffff960 ' 00470000 fffff960' a 0047, 000 TSDDD TSDDD.dll unavailable (00000000)
fffff960 ' 00700000 fffff960' 00727000 cdd c:\windows\system32\cdd.dll unavailable (00000000)

Unloaded modules:
fffff880 '08-98000 fffff880' 08ac9000 WUDFRd.sys
Timestamp: unavailable (00000000)
Checksum: 00000000
ImageSize: 00031000
fffff880 '08a7d000 fffff880' 08a 98000 USBSTOR. SYS
Timestamp: unavailable (00000000)
Checksum: 00000000
ImageSize: 0001 B 000
fffff880 ' 07824000 fffff880' 07895000 spsys.sys
Timestamp: unavailable (00000000)
Checksum: 00000000
ImageSize: 00071000
"fffff880 ' 084 c 2000 fffff880 ' 0853f000 IDSVia64.sys
Timestamp: unavailable (00000000)
Checksum: 00000000
ImageSize: 0007D 000
fffff880 '01daa000 fffff880' 01db8000 crashdmp.sys
Timestamp: unavailable (00000000)
Checksum: 00000000
ImageSize: 0000E000
fffff880'0441f000 fffff880'047 c 3000 dump_iaStor.
Timestamp: unavailable (00000000)
Checksum: 00000000
ImageSize: 003A 4000
fffff880 '047 c 3000 fffff880' 047d 6000 dump_dumpfve
Timestamp: unavailable (00000000)
Checksum: 00000000
ImageSize: 00013000
fffff880 ' 047 d 6000 fffff880' 04800000 cdrom.sys
Timestamp: unavailable (00000000)
Checksum: 00000000
ImageSize: 0002A, 000
			 
Hi Vijya Kumari / Gary / other.
UPDATE
I gave up watching the issue myself. I ended up taking the computer to the tech shop where the person changed the hard drive. Its been a few days now and it seems to work very well so the problem was the hard drive in this case!

Anyone reading the post... FYI, I did through hard drive check 3 times (it took 2-3 hours each time) and my hard drive had the control each time. I asked the tech shop person and he mentioned that it is sometimes possible that the hard drive would be to control but is faulty. It is a little advice for those who are the rescue disk problem devices in my case being given the hard drive passed the test I have excluded hard and ended up paying $ 100 hard disk $ 40: (.)
Thank you
Amit
		    
            
            
		     Cannot delete the .htaccess file 
			 Hello


I am tryig to set up INCLUDES for my wbsite


I understand that I must put a small piece of code in the .htaccess file to make the .htm files work with includes.


My problem is...
There is an empty folder called .htaccess and DW won't let me delete it
for this reason I can't put a new .htaccess in the root of my site because there is a folder with the same name.


All thoughts			 Navigate to the folder containing the file (!) called .htaccess and
delete it via windows Explorer.
harry57 skrev:
> Hi
>
> I'm tryig to set up INCLUDES for my wbsite
>
> I understand that I must put a small piece of code in the .htaccess file for
> Make sure that the .htm files work with includes.
>
> My problem is...
> There is an empty folder called .htaccess and DW won't let me delete it
> for this reason, I can not put a new .htaccess in the root of my site because
> There is a folder with the same name.
>
> Any thoughts
>
--
Kim
---------------------------

http://www.geekministry.com
		    
            
            
		     Once I updated to Firefox 11, I can't open the pdf files.  It's more the computer, snow leopard and lion and more than one Web site. 
			 I've updated to Firefox 11 and now I can't open the PDFs Online.  This has happened on more than 1 computer, using the two OS 10.6.8 and OS 7.0 and on more than one Web site.  I tried to uncheck "block pop-up windows" in preferences, but which did not help.
When I use Safari to open the same file to pdf, they open fine. Everything worked fine with my Firefox until I did the upgrade.
I prefer to continue to use Firefox, but I can't understand the root of the problem.
Has anyone else had this happen as well?
			 Thank you, gentlemen, to find a "solution" to this particular behavior of Firefox.  It is really curious that even if the screen is blank, you can indeed save the .pdf Ghost and then open the saved file to view.  What is amazing to me is that this issue does not seem to be what makes the hit parade of the problems currently experienced Mozilla.  Not everyone will be willing to do a research project extended rather than leave the ship for Safari, etc..
		    
            
            
		     Application has failed to start because msa32dl was not found, reinstalling the application may fix the problem 
			 How can I fix it?
application has failed to start because msa32dl was not found, reinstaling the application may fix the problem
			 First make sure that your system is clean in:
Download, install, update and scan with these full free malware detection programs:
Malwarebytes (MMFA): http://malwarebytes.org/
SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
http://www.Microsoft.com/security/scanner/en-us/default.aspx Security Scanner    
http://www.eset.com/us/online-scanner/ eset online scanner
Then answer the following questions:
brand and model of the pc
current antivirus
Operating system and service pack
What application fails to start?

 
		 
          Maybe you are looking for 
           
            
		     When going through the process of downloading with social monkee and reach the point add it to firefox, I get the following message: "social Monkee cannot be installed because firefox is unable to modify the required." How can this be repaired? 
			 When going through the process of downloading with social monkee and reach the point add it to firefox, I get the following message: "social Monkee cannot be installed because firefox is unable to modify the required." How can this be repaired? 
		    
            
		     Error 800B010D with Windows updates 
			 WHEN I TRY TO INSTALL MY WINDOWS UPDATES, I GET AN ERROR CODE ON ONE OF THEM.  THE ERROR CODE IS 800B010D.  HOW CAN I SOLVE THIS PROBLEM? * Title *.Can I UPDATER PROBLEM 
		    
            
		     Error code 8024402f updates Windows Vista 
			 These errors must be fixed for security and verification of historical performance update last updated 11/09/2012 much appreciated your help, [Moved from comments] 
		    
            
		     restoring of a retouched photo 
			 Hi I have cropped photo on my pc using Microsoft office Picture Manager, and unfortunately he did not spare the original... any ideas how I can get that back because it's a really important photo. Thank you 
		    
            
		     shortcut for applications icon does not open I open all my applications only through C: drive (from the location of the parent). I can not open any application via Start menu 
			 even wen I just click on the icons there is no open option cannot one help me