Corel Draw 10 problems.

Similar Questions

• I have a problem with the display of text on Corel Draw X 3 after installing a Windows Update.

  Hi all

  No, not so much a question, but I thought I'd post here because it can help others.

  I used Corel Draw X 3 yesterday (12/12/12) to make a simple business card text only. Today - the file open and something is there, but the text is invisible. Further investigation revealed that this affected all fonts and Type 1 fonts from OTF, TTF fonts are immune to the problem.

  What has changed between yesterday and today? A Microsoft update that I shut down the computer last night. I uninstalled the update via Add/Remove Programs, and the problem was solved.

  Any suggestions as to who should I report this problem?

  -Frank Jones
  Dynamic funds, Geelong, Australia

  Original title: Win XP update Corel X 3 12/12 font management breaks?

  I have installed the latest updates and the v2 of KB2753842 solved the problem. Thank you.

• Error code 998 problem with Corel Draw - error Code 998 for start Corel DrawX5

  System: windows 7 64 bit

  Product problem: Corel Draw X 5 including Corel Photo pain and Corel Draw
  Launch of the AU: code error 998
  "Could not load corelpp.dll" or "cannot load CorelDrw.dll.
  However, the .dll are existing.
  Uninstallation and reinstallation complete nothing changed the software.
  Thank you for your help.
  System: windows 7 64 bit
  My problem is with Corel Draw X 5
  When I run the application Corel Photo paint or Corel Draw, the error message is:
  "Could not load corelpp.dll" or "cannot load CorelDrw.dll.
  But the .dll file really leaves in my C:
  Thank you for your help

  Probably better if you ask Corel. Because this is not the Microsoft program

• Problem with Corel Draw 9 on Satellite A100-474

  Satellite A100-474 (PSAA9)
  nVidia 84.68
  Corel Draw 9.0 stop responding after select Tools-> Options
  After uninstalling drivers nVidia correct of all the work.
  Please help me.

  Hello

  Seems that the really graphic driver does not support the version of Corel Draw
  In my opinion, you need to update the graphics driver. If you already have the last version, I guess you have to wait until the new version is released.

  But have you contacted support from Corel Draw? Do it!

• Error: "the patch cannot be installed by the Setup program because the program is missing" during installation and Service Pack 2 for Corel Draw X 3.

  original title: corel draw X 3 need a file to upgrade to work and will not install Windows install. I am running XP

  Windows Installer won't install Corel Draw X 3 patch for Corel SP1 and SP2.  Corel X 3 was released at the end of the 1980s, well before updates from Microsofts SP.

  These files are patches for the X 3 program and have nothing to do with Microsoft SP 1, 2 and 3.

  The error that gives the installer of windows, is that the patch cannot be installed by the installer, because the program is missing (which is not the case) or the upgrade patch may update a different version of the program, (which he did... this fix is designed especially for the X 3 only and is in fact the upgrade for him.)

  It says to check that I have the program on my computer and I have the appropriate fix. (What I'm doing.)
  NOTE:
  Last week I had to remove Corel X 3 from my computer and re-install. After that, I couldn't get the patch installed, and it needs those 2 patches to work properly.

  I am running XP Pro with MS Service pack 3 on my computer.  I have Intel pentium 4, 2944 usable Mg 300Ghz installed memory 266,80 GB of free space on 2 hard drives.

  Another site said a faulty windows installer can cause "out of memory" errors and has spent in Corel Draw so I deleted and reinstalled as I've mentioned above. Any ideas on how to get this installed?  Hope you can help, I don't know where to turn to the next if not. Corel does not support this program because of his age. I can't afford to update at the moment so I have a problem here. Any help would be much appreciated. Thank you

  Been away in a few days. Just in case anyone else has this problem, I found the answer. It's one of those moments DUHHH.

  If you use the version of Corel Draw X 3 13.0.0.739, there already = sp1 and sp2 patches and pre-installed horfix.

  Should check that the first step, but I thank you

  David Vinod to try to help this sometimes fictitious.

  Best regards, Frank

• Corel Draw crashes with "ISKernel file could not be installed"

  Corel Draw 12 questions

  After installing Corel Draw 12, whenever I try to import a photo file Corel Draw stops. Failed to install ISKernel file and forces me to have privileges on this machine. How can I solve this problem.

  Wayne

  Your first port of call must be supported in Corel Draw.

  http://www.Corel.com/servlet/satellite/us/en/content/1152796555474

• When I copy and paste into my Corel Draw, the image is distorted with the cutting tool

  Original title: the cutting tool false image

  I used snipping too long without problem.  Now all of a sudden (only when I copy and paste into my Corel Draw) the image is distorted.  I use windows 7 64-bit.

  Hi Diana,

  1 have you ever done any recent hardware or exchange of software on your computer before the show?

  2 have you tried to check the issue with another application?

  3. what files are copy you / paste in Corel Draw, using the cutting tool?

  If the problem is specific to Corel application, then I suggest you to contact the Corel Support for assistance.

  Corel communities:

  http://www.Corel.com/Corel/pages/index.jsp?PgId=800085

  Supported Corel:

  http://www.Corel.com/Corel/pages/index.jsp?PgId=800170

  For reference:

  The cutting tool: frequently asked questions: http://windows.microsoft.com/en-in/windows7/snipping-tool-frequently-asked-questions

   

  Snipping Tool to capture screen shots:

  http://Windows.Microsoft.com/en-in/Windows7/use-Snipping-Tool-to-capture-screen-shots 

  I hope this helps.

• Can't Pin To Start a shortcut of Corel Draw 11

  Hey there

  I installed my copy of Corel Draw 11 on my new laptop that is running 8.1 Win.

  I want to pin the shortcut to the start screen.

  When I right click on the shortcut, it does not show pine To Start optional.  All the other normal options are there, except this one.

  No idea why?

  A way to solve this problem?  I tried to just create a shortcut and copy the original shortcut properties, but that opens the folder where the program lives, instead of actually launch this program.

  THX

  Fish

  My mistake, right click on the EXE file itself inside the program folder files.

• I use the current trial of Acrobat DC version. I opened a PDF I created in Corel Draw by publication in PDF format. I tried to copy and paste text from it to a Word 2007 document. The copy option was available, but when I went to the document and ch

  I use the current trial of Acrobat DC version. I opened a PDF I created in Corel Draw by publication in PDF format. I tried to copy and paste text from it to a Word 2007 document. The copy option was available, but when I went to the document and chose paste, it was nothing. I then tried the same thing but sticking in a document of Corel. The same problem. It seems that the text has been copied, but I'm unable to paste it into another program. Is this real?

  Is it permanently available text? (Can highlight you)?

  This seems a strange way of working well - why not copied from the draw to Word?

• Using eps Format to transfer images of Corel Draw

  I need to save a CMYK image in a format that I can import into Corel Draw.  There are only a few options of file type.  The only one I could do the work is eps.  I had no experience with this format.  If I save a file in eps format and import it in Draw likely losses in the image as it was in PS?

  The only one I could do the work is eps.  I had no experience with this format.  If I save a file in eps format and import it in Draw likely losses in the image as it was in PS?

  Bitmap EPS image is wrapped around with a bit of extra data TIFF file or a JPEG, depending on what compression option you choose. There is therefore no loss due to compression in the first case, but of course used for the second. As to why CorelDraw does not import other formats correctly, is unclear, but it is sure that more of a problem on their end - a picture is an image, only how it is treated and processed varies.

  Mylenium

• How can I get Adobe Reader to open my pdf files that have been sent to me rather than Corel Draw?

  Corel Draw open my pdf files that are sent to me. I want Adobe to open

  Hello

  Now, you have configured pdf files to open with Corel Draw. You need to change this. Follow the following steps:
  1. click on Start - Control Panel ;
  2. appearance and themes - Folder Options;
  3. Select the File Types tab;
  4. search and click on extension pdf ;
  5. click on the Change button.
  6. Select Acrobat Reader (if you can't find in the list, then click Browse and found wherever you have installed);
  7. check always use the program selected to open this type of file;
  8. confirm with Ok .

  Good luck!

• How to change the settings for help on using Corel Draw 7

  In windows 7. -Pop-up help screen. A real nusance

  whenever I try to use my program corel draw a box windows 7 help and support of pop. How to do that I need help and support, I know the program very well stop

  Just an idea

  What is Windows help & support window suggesting that you download the program hlp old format?

  If so, it indicates that Corel Draw is trying to tell you something with its start-up system [might well be generated by an error condition as Corel Draw 7 is not recognized as compatible Windows 7] and Windows recognizes that it would be necessary to get this old hlp format help system to be able to show you what the app is trying to tell you.

  Allowing Windows to download & install this old help system would be the only way to get rid of the pop-up window.  And then you'd be able to see what Corel Draw was trying to tell you.

• I can't use Corel Draw 8 on Windows 7.

  Why can I not use my corel draw 8 on this window, I don't want to buy a new verion of corel 8

  original title: old programs

  Here's a detailed response which was published in another thread by Legendre (MVP):

  In the end, I suspect that you may need to upgrade to a later version. There is the alternative of a Virtual PC solution. To do this, you must either XP mode on Windows 7 (available for Windows 7 Pro and above.) Download from Microsoft Download pages).

  ======================================
  Corel Draw 8 Windows is always gettable?
  http://ask.MetaFilter.com/129580/is-Corel-Draw-8-for-Windows-still-GetTable

  Make older programs in this version of Windows (Windows 7)
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Windows 7 Compatibility Center
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows Virtual PC
  Download Windows XP Mode
  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  Windows XP Mode (Windows 7 only, but not one of the Home versions) "you are not eligible to download Windows XP Mode. You must have Windows 7 Professional, enterprise or full to run Windows XP Mode." Processor type you must support this option too. It does not come with a free and activated XP version.

  This warranty covers the gambit set of VMS in the 'Home' versions if you want to have a look. Of course you need a licensed copy of XP, or an old 98 or ME CD to install and run in any of them.

  VirtualBox is an impressive VM competitor
  http://WindowsSecrets.com/search/?CX=017937947691920082874%3A_ilcm6kdy_y&COF=FORID%3A11&q=VirtualBox+is+an+impressive+VM+contender+&SA=search&advWS=1&advSAN=1&advPages=15

• Menu of help from Corel Draw keeps popping up.

  Help menu keeps saying unable to connect to the internet. My computer is not able to wifi. And I don't want that it connected to the internet, because I use it just for printing. I can't click on anything in this program without this Help Menu appears. How can I prevent this happening so I can use the program again? TIA

  Drapes,

  Try the suggestion given in this link

  http://www.SevenForums.com/BSOD-help-support/155558-Windows-7-Corel-Draw-9-support-message-won-t-go-away.html

• When I open Corel Draw 7 (Yes it's old, but he's all I have to do) as soon as I try to do anything on a graph, the window titled ' help' "Why can't I get help from this program?

  Original title: the HELP window interferes with Corel 7

  When I open Corel Draw 7 (Yes it's old, but he's all I have to do) as soon as I try to do anything on a graph, the window titled ' help' "Why can't I get help from this program?  opens and won't allow me to contimue.  As soon as I close the window, the first action I take it opens again.  Nothing EVER happens on my chart.  I can't take ANY action.  How can I close that window and keep it closed.

  Any ideas?

  I just did a clean install of Windows 7 Home Premium from a disk I bought at Staples.  I then re-load my old version of Corel.  Corel Photo-Paint works well, it is fair to Corel Draw.

  Corel Draw 7 is not compatible with win7, even when you use the compatibility options