Corresponding to the F5 and F55 with a profile photo

Similar Questions

• Guide movie EI on the F5 and F55.

  I set up a guide to the movies AE for the F5 and F55. You will find here.

  http://www.XDCAM-user.com/2013/12/Cine-EI-mode-when-recording-s-log23-and-raw-on-the-F5-and-F55/

  It should guide you how to use movie EI and the benefits it offers.

  All comments, corrections etc. Welcome.

  Thanks Alister, funny enough, I also noticed this culture of centre 2K seems to be about 1/4 stop faster than full 2K on a single graphic. Can't explain it, but it seems to always be like that. Maybe I'm losing it

• I've updated VIA / S3G UniChrome IGP plug-and-play reverse, but the update still no resolution 1600 x 1200 with the exception and others with the same ratio of 4 x 3.

  I've updated VIA / S3G UniChrome IGP plug-and-play reverse, but the update still no resolution 1600 x 1200 with the exception and others with the same ratio of 4 x 3. That did not help.

  Hello

  1. What version of Windows are you using?
  2. What is the brand and model of the computer?

  I suggest to run the patch from the following link and check the status of the issue.

  Hardware devices do not work or are not detected in Windows.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  If the problem persists, I suggest you to send us more information to help you better.

• I'm administrator, but do messages telling me that what I want to do is forbidden by the administrator and verify with the system administrator

  original title: administrator problem

  I am the administrator with a password (in fact the only user of my computor) but continue to receive messages telling me that what I want to do is forbidden by the administrator and verify with the system administrator. How to work around this problem? My os is Vista Home Premium.This happens more frequently when I try to remove a program

  According to what "program", you tried to 'delete '.

  If one of these programs to the system, you will get the message.

  If it's one of those programs that you have installed from the web, try one of these programs to "Uninstall" part 3:

  Revo Uninstaller 1.91
  http://download.CNET.com/Revo-Uninstaller/3000-2096_4-10687648.HTML?tag=mncol

  IObit Uninstaller 1.1
  http://download.CNET.com/advanced-uninstaller-free/3000-2096_4-75157230.HTML?tag=mncol

  Advanced Uninstaller Free 10.1.1
  http://download.CNET.com/Revo-Uninstaller/3000-2096_4-10687648.HTML?tag=mncol

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Need to insert the Date and time with AM or PM

  StartDate form has ' 25/07/2006' and Starttime "13:07.
  I need to add this field in the database to display the Date and time with the AM or PM. But the result I get is false.
  <! - concatenate fields - >
  "< cfset Startdate = #Startdate # &" "& #starttime # >.
  
  < cfset startdate = #DateFormat (CreateODBCDateTime (Startdate), ' mm/dd/yyyy hh: mm: tt ') # >
  Here is my production. This is not the AM or PM conversion part of the chain.
  
  25/07/2006 01:07 am
  
  My database is SQL 2000
  

  You use any of dateformat. The createodbcdatetime sends the correct your DB value if you do it right.

• I'm the original purchaser of Creative Suite Premium. Still, she meets my needs but will not re - install after I upgraded my box to win 10. Win 10 is not the problem, and my Adobe customer profile indicates that the product is registered. Adobe just does

  I'm the original purchaser of Creative Suite Premium. Still, she meets my needs but will not re - install after I upgraded my box to win 10. Win 10 is not the problem, and my Adobe customer profile indicates that the product is registered. Adobe just doesn't let me activate it. Can you help me?

  If you're referring at the origin of Creative Suite (CS1) then this activation server was closed by Adobe a few years ago.

  The only way to re - install now is to download a new version without activation for CS2 (also applies to CS1 owners).

  Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

  Install, then enter the new, without activation serial number provided at this link (column next to the download link). Your existing serial number no longer works.

• Corresponding to the string of text with a keyword and check whether it exists or not

  We have this DESCRIPTION column, and the data inside it are:

  Mr. Redmond Bred is to have a red balloon. His tie is also red.

  Now, when you use it AS operator with the keyword 'red', he finds a match in these 3 words: Redmond, Bred and red.

  But in my case, the match should happen with the word "red" only. Is this possible?

  Yes, it is possible, for example by using regular expressions.

  Also please note that your first assumption is wrong. The like operator won't find Redmond.

  Example of

  select *
  from dual
  where regexp_like('Redmond''s Bred is having a red balloon. His tie is also red.','(^|\s)red(\s|$)');
  

  Post edited by: SvenW. : added example

• Combine the size and attributes with application Dates

  Hello, I'm trying to combine data from two tables (DIMENSION and ATTRIBUTES) below and load the data corresponding to the OUTPUT.

  Can anyone share idea on how I can combine the two? (attribute table has no ID and has only COUNTRY & TYPE to join DIMENSION)

  Version Oracle 11g: (11.2.0.2)

  
  

  CREATE TABLE DIM (ID VARCHAR2 (10), NAME VARCHAR2 (20), TYPE VARCHAR2 (20), COUNTRY VARCHAR2 (2), EFF_DT DATE, DATE END_DT);

  CREATE THE TABLE ATTRIBUTES (TYPE VARCHAR2 (20), COUNTRY VARCHAR2 (2), CHAR (1) OF THE CLASS, EFF_DT DATE, DATE END_DT);

  INSERT INTO VALUES('1','ABC','A','US',TO_DATE('30-SEP-2013','DD-MON-YYYY'),TO_DATE('31-DEC-2099','DD-MON-YYYY')) DIM;

  INSERT INTO VALUES('1','ABC','A','CA',TO_DATE('30-SEP-2013','DD-MON-YYYY'),TO_DATE('31-DEC-2099','DD-MON-YYYY')) DIM;

  INSERT IN DIM values('2','XYZ','B','US',TO_DATE('3-FEB-2014','DD-MON-YYYY'),TO_DATE('31-DEC-2099','DD-MON-YYYY'));

  INSERT IN the values('A','US','C',TO_DATE('1-JAN-2014','DD-MON-YYYY'),TO_DATE('28-SEP-2014','DD-MON-YYYY ATTRIBUTES '));

  INSERT IN the values('A','US','C',TO_DATE('29-SEP-2014','DD-MON-YYYY'),TO_DATE('31-DEC-2099','DD-MON-YYYY ATTRIBUTES '));

  INSERT IN the values('A','CA','E',TO_DATE('1-JAN-2014','DD-MON-YYYY'),TO_DATE('28-OCT-2014','DD-MON-YYYY ATTRIBUTES '));

  INSERT IN the values('A','CA','E',TO_DATE('29-OCT-2014','DD-MON-YYYY'),TO_DATE('31-DEC-2099','DD-MON-YYYY ATTRIBUTES '));

  Thank you.

  Maybe let separate everything first delete duplicates

  with

  Sun did

  (select id '1', the name of 'ABC', 'A' type, 'US' country, to_date('30-SEP-2013','DD-MON-YYYY') eff_dt, to_date('31-DEC-2099','DD-MON-YYYY') end_dt Union double all the)

  Select '1','ABC','A','CA',to_date('30-SEP-2013','DD-MON-YYYY'),to_date('31-DEC-2099','DD-MON-YYYY') of all the double union

  Select '2','XYZ','B','US',to_date('3-FEB-2014','DD-MON-YYYY'),to_date('31-DEC-2099','DD-MON-YYYY') of the double

  ),

  attributes such as

  (select 'A' type, countries 'US', 'C' class, to_date('1-JAN-2014','DD-MON-YYYY') eff_dt, to_date('28-SEP-2014','DD-MON-YYYY') end_dt Union double all the)

  Select 'A','US','C',to_date('29-SEP-2014','DD-MON-YYYY'),to_date('31-DEC-2099','DD-MON-YYYY') of all the double union

  Select 'A','CA','E',to_date('1-JAN-2014','DD-MON-YYYY'),to_date('28-OCT-2014','DD-MON-YYYY') of all the double union

  Select 'A','CA','E',to_date('29-OCT-2014','DD-MON-YYYY'),to_date('31-DEC-2099','DD-MON-YYYY') of the double

  )

  SELECT id, name, type, country, class, eff_dt, end_dt

  NVL (lead (eff_dt) over (partition BY id, type, order of eff_dt countries) - 1, end_dt) end_dt_new

  from (select distinct id, name, coalesce(type_d,type_a) type, country, case when x = 'a' then class end class, eff_dt,)

  -case when end_dt = date ' 2099-12-31' then add_months (trunc (eff_dt, 'yyyy'), 12)-1 else end_dt end end_dt

  from (select d.id, d.name, d.typ subscription_type, a.typ type_a, d.country, a.class,)

  d.eff_dt d_eff_dt, d.end_dt d_end_dt, a.eff_dt a_eff_dt, a.end_dt a_end_dt

  Dim d

  full outer join

  attributes one

  We d.country = a.country

  and d.typ = a.typ

  )

  UNPIVOT ((eff_dt,end_dt) for x in ((d_eff_dt,d_end_dt) as ' of,(a_eff_dt,a_end_dt) like 'a'))

  )

  order by 1,2,3,4,6

  ID	NAME	TYP	COUNTRY	CLASS	EFF_DT	END_DT	END_DT_NEW
  1	ABC	A	CA	-	30/09/2013	31/12/2013	31/12/2013
  1	ABC	A	CA	E	01/01/2014	28/10/2014	28/10/2014
  1	ABC	A	CA	E	29/10/2014	31/12/2014	31/12/2014
  1	ABC	A	WE	-	30/09/2013	31/12/2013	31/12/2013
  1	ABC	A	WE	C	01/01/2014	28/09/2014	28/09/2014
  1	ABC	A	WE	C	29/09/2014	31/12/2014	31/12/2014
  2	XYZ	B	WE	-	03/02/2014	31/12/2014	31/12/2014

  Concerning

  Etbin

• Will buy the Xoom and use with MIFI

  I intend to buy the Xoom and use it only with Mifi (on the road) and my wireless router (at home), if I have to buy with Verizon CDMA, I'll do it, but I don't intend to start a plan with Verizon, I hope that it works for the units that are selling from 02/17/11.

  The XOOM has wifi, so your Mifi will work with him. you wouldn't buy a package given just the XOOM.

• A few days, I bought a mac mini which I transferred the data and programs with time machine: programs have been updated except for iMovie, and now it seems that I have to pay for the update: possible? What I am doing wrong?

  A few days ago, I bought a mac mini and I transferred all my data and programs with time machine: all programs have been updated but iMovie (7.1.4)... However, it seems that, to update to the latest version, I have to pay to download on Appstore: is it possible? what I am doing wrong?

  If it were a new mac mini, you need already installed 10.1 iMovie.  Otherwise, but you already have iMovie 9 registered version to your Apple ID, you can upgrade to version 10 for free, but if (as it appears) is an earlier version then you have to buy version 10.

  Geoff.

• Synchronization of the inputs and outputs with different sampling frequencies

  I'm relatively new to LabView. I have a NOR-myDAQ, and I am trying to accomplish the following:

  Square wave output 10 kHz, duty cycle 50%.

  Input sampling frequency of 200 kHz, synchronized with the output that I get 20 analog input samples by square wave, and I know what samples align with the high and low output of my square wave.

  So far, I used a counter to create the square wave of 10 kHz, display on a digital output line. I tried to pull the document according to (http://www.ni.com/white-paper/4322/en), but I'm not sure how sample at a different rate than my clock pulse. It seems that this example is intended rather to taste one entry by analog clock pulse. There may be a way to create a faster clock (200 kHz) in the software and use that to synchronize the analog input collection as well as a slower 10 kHz output generation square wave?

  I eventually have to use the analog inputs to obtain data and an analog output to write the data channel, so I need the impetus of the square wave at the exit on a digital PIN.

  How could anyone do this in LabView?

  Hi Eric,.

  All subsystems (, AO, CTR) derive from the STC3 clocks so they don't drift, but in order to align your sample clock HAVE with pulse train that you generate on the counter, you'll want to trigger a task out of the other. I would like to start by a few examples taken from the example Finder > Input and Output material > DAQmx. You can trigger GOT off the train of impulses, start by Gen digital Pulse Train-keep -you probably already use a VI like this to generate 10 k pulse train. AI, start with an example like Acq Cont & chart voltage-Ext Clk - Dig Start.vi-you'll want to use the internal clock so just remove the control of the "Source of the clock" and it uses the internal clock. From there, simply set the "Source of the command" either be the PFI line generates the meter, or ' //Ctr0InternalOutput '-assuming that you are using the counter 0. You'll want to make sure that the start of the task HAVE faced the task of counter I is ready to trigger off the first impulse. They should be aligned at this point.

  For debugging, you can use DAQmx export Signal to export the sample clock - you can then brought the train line and the PFI pulse to make sure that they are aligned.

  Hope this helps,

  Andrew S

• Camera does not show the extent and automation with Legacy 1394 drivers

  Hello

  I have a Guppy AVT Firewire camera and try to get this camera working on a new Windows 7 PC, I have here.  The PC is running Windows 7 Professional 32 - bit.  When I connect the camera to the computer, it installs the driver NOR-IMAQdx IIDC, the camera appears in the studio of measurement and automation (version 4.6.2) under the heading "devices OR-IMAQdx", and everything seems to work great.  However, I need to use the legacy driver.  When I select the "Legacy IMAQ IEEE 1394 IIDC" driver, the device disappears from measurement and Automation Studio.  Reboot of the camera or to disconnect and reconnect the camera do not help.  In the Windows Device Manager, the la camera camera shows that the use of inheritance OR IMAQ IEEE 1394 driver (11/10/2006, version 2.0.5.0 that day), and windows reports it as working properly.  However, it is not always on display of the measurement and Automation and my application cannot see the camera.

  Here is what I tried:

  * Update the NI Vision Acquisition version 2009.11 software.

  * Make the legacy NOR-IMAQ for cameras 1394 2.0.5 is installed

  * A tried the same device with the same software on an old PC running Windows XP and found everything works as expected it.

  * A tried a card PCI IMAQ 1405 in the Windows 7 PC, which works very well.

  * Search in the forums.  I found several references to this document which refers to issues where disappear from the camera of measurement and Automation Explorer:

  http://digital.NI.com/public.nsf/allkb/22AD45D8A5B053AF86256EB5003B2811?OpenDocument

  It seems that it might apply to my situation, however, the link is dead for me.

  Thanks for any help!

  I suggest you to install the bus driver 1394 AVT on your PC.

  This replaces the microsoft implementation of the 1394 Protocol and is better suited to the activities of the vision.

  You always can choose IMAQdx or old drivers.

  http://www.alliedvisiontec.com/EMEA/products/software/Windows/AVT-1394-busdriverpackage.html

  However, I'm not sure if it will work on windows 7

  Ben Engelen

• All the icons and files with the extension .lnk and error message: "Windows cannot open these files.

  Original title: STUCK IN. LNK ??????????????????????????????????????????????????????????????

  all my icons turned into extensions of file and state that "windows is unable to open these files. I can't search the Web for a fix, because it downloads as a .lnk I can't open as well?

  Hi MarcSatz,
   
  -Did you change on your computer before this problem?
   
  This problem occurs when one or more of the following conditions are met:
  • The registry values that are associated with the file name extension are corrupted or missing values.
  • The computer is infected with a virus.

  Here is an article that will guide you in the process of fixing the issue:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
   

  Cannot open files with extensions such as.exe, .com, and.lnk on a Windows XP-based computer

• Ive accidentally lost all the icons off the coast of the opening of the page and left with a scanned document?

  Ive lost accidnetl all my icons amd left the documents scanned on my homepage?

  Hello

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Recognizing the Intrusions and dealing with Registry Hacks

  Just installed a copy of Vista Ultimate 64 bit and got it upward and running without problem for a couple of days.  Today, the Internet stopped briefly and then minutes later he did again.  Suspecting an intrusion, I checked the relationship between downloaded to downloaded packages.  I looked at simply, does not download music, videos or something like that, and I had been on during a few hours.  Download Download the report is about 1 / 3 and I could see a lot of activity on the upstream with all browser windows closed and no open programs (other than background processes).  If it has been updated, I would see a lot more activity on the downstream!  So I shut down the system, disconnected my cable modem and waited to get a new IP address.  I don't think it is normal to see such a ratio and wait at least to a minimum, 01:10 regarding the packages downloaded from the downloaded packages. My gut tells me that someone was in my system mucking around.

  Am not a fan of the Windows registry because it allows keys to be surreptitiously inserted that I have no permission - even as an administrator - change.  People can edit your registry to open doors for them to come and go and give them the ability to run a remote software that does not appear on your screen.  They can run processes that do not appear in the list of processes.  Even if you think about it, once they take away your ability to see and remove their keys, you have no real way to do much.

  If someone in your system hacks the registry to defeat your security, it is not like a virus. If no virus checker will never see it.  He just thinks you want that your system is set up this way.

  Why Microsoft is not dating a utility that would allow an administrator to reset the Windows registry to a set of default values such as Windows returns to a State where it would be if it were installed with all the security current updates and drivers for hardware on the Microsoft Update site.  All entries in registry and other customizations user would be wiped off the register. No backdoor open, download closed.  In my opinion, it takes a utility like that and I'm certainly not the first to come up with the idea.  What stops Microsoft to release something like that?

  I think you are misunderstanding the registry and what it does.  I could spend a few weeks teach you this topic, or you could get books and studies.  But to list some of your misconceptions:

  1. the registry may only be changed by you by using the registry editor, or a program you gave permission to run on your system.  There is no way an Internet connection can edit your registry database, or the data that flows over an Internet connection.

  2. just put something in the registry is no harm either.

  3. somehow the registry cleaning as you suggest would kill every program installed on the system.  Any software that does not come with Windows (think, Microsoft Office, updated Internet Explorer, software utility, everything that you install) would probably be nuked and killed by such a destructive restore.  If all the drivers you have downloaded directly from the manufacturer, or provided with the hardware you have installed after that you did this registry restore. No hacker could do the kind of damage this type of restore registry would do to your system.

  If you suspect that someone can enter your computer, trying to protect or restore the registry is absolutely the wrong way to stop.  This is what software firewalls, antivirus, anti-spyware, etc. are for.

  'J T Schwager' wrote in the new message: * e-mail address is removed from the privacy... *

  Just installed a copy of Vista Ultimate 64 bit and got it upward and running without problem for a couple of days.  Today, the Internet stopped briefly and then minutes later he did again.  Suspecting an intrusion, I checked the relationship between downloaded to downloaded packages.  I looked at simply, does not download music, videos or something like that, and I had been on during a few hours.  Download Download the report is about 1 / 3 and I could see a lot of activity on the upstream with all browser windows closed and no open programs (other than background processes).  If it has been updated, I would see a lot more activity on the downstream!  So I shut down the system, disconnected my cable modem and waited to get a new IP address.  I don't think it is normal to see such a ratio and wait at least to a minimum, 01:10 regarding the packages downloaded from the downloaded packages. My gut tells me that someone was in my system mucking around.

  Am not a fan of the Windows registry because it allows keys to be surreptitiously inserted that I have no permission - even as an administrator - change.  People can edit your registry to open doors for them to come and go and give them the ability to run a remote software that does not appear on your screen.  They can run processes that do not appear in the list of processes.  Even if you think about it, once they take away your ability to see and remove their keys, you have no real way to do much.

  If someone in your system hacks the registry to defeat your security, it is not like a virus. If no virus checker will never see it.  He just thinks you want that your system is set up this way.

  Why Microsoft is not dating a utility that would allow an administrator to reset the Windows registry to a set of default values such as Windows returns to a State where it would be if it were installed with all the security current updates and drivers for hardware on the Microsoft Update site.  All entries in registry and other customizations user would be wiped off the register. No backdoor open, download closed.  In my opinion, it takes a utility like that and I'm certainly not the first to come up with the idea.  What stops Microsoft to release something like that?