Corruption in the operating system of the files - where to start?

Similar Questions

• I'm looking for an image compatible Windows Server 2003 vmware study the operating system. Anyone know where I can find an image file?

  Original title: Windows Server

  I don't know where to put this question, so here goes I am looking for a picture compatible Windows Server 2003 vmware study the operating system. Anyone know where I can find an image file?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• The key of the MA is not configured properly or is corrupted in the file system and s doe does not exist in the repository of management.

  I get this error and is it possible to solve this problem without re-creating the service/s once again, etc. Just curious, if you have suggestions/steps I may have missed or I'll drop and recreate new services

  In any case, I have a backup of the emkey.ora and place it in the sysman/config directory, but still does not work... Please see below...

  C:\Documents and Settings\abigail > emctl status emkey

  Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0

  Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.

  Enter the password for the repository:

  ********

  ****

  The key of the MA is not configured properly or is corrupted in the file system and the DOE

  s does not exist in the repository of management. To correct the problem:

  (1) (copy the emkey.ora another WHO file or backup machine OH/sysman/c

  onfig directory.

  (2) configure the emkey.ora file by running ' emctl config emkey - emkeyfile < emkey.

  ".ora file location >.

  C:\Documents and Settings\abigail > emctl config emkey - emkeyfile E:\app\abigail\p

  roduct\11.2.0\dbhome_1\sysman\config

  Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0

  Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.

  Enter the password for the repository:

  ********

  ****

  The key of Em is already configured. To override the current configuration, run "em".

  CTL emkey < options > config - force. "

  C:\Documents and Settings\abigail > emctl config emkey - emkeyfile E:\app\abigail\p

  roduct\11.2.0\dbhome_1\sysman\config-force - sysman_pwd *.

  Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0

  Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.

  The key of the MA could not be configured. Cannot access the file E:\app\abigail\product

  \11.2.0\dbhome_1\sysman\config.

  C:\Documents and Settings\abigail > emctl dbconsole sysman_pwd secure *.

  Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0

  Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.

  http://Abigail:5501 / console/em/aboutApplication

  DBCONSOLE already stopped...   Fact.

  Officer is arrested...   Fact.

  Dbconsole fixing...   Has begun.

  Please enter repository schema password:

  Dbconsole fixing...   Failed.

  EMKey is misconfigured.

  Sorry but I have to ignore your suggestion and don't worry how I spend my time

  AND OHMYGODD IT WORKSS! For later use, this is how I solved it based on my research, in fact based on a particular search:

  http://franjv.blogspot.com/2013/08/eMKey-problems-in-Oracle-RAC-11gr2.html

  Thank you the one who wrote this and... is it the same "Fran" who helped me last time? Coincidence?

  In any case, thanks

• Toshiba satellite running Vista. The file is possibly corrupted. The file header checksum does not match the checksum calculated

  Toshiba satellite running Vista. The file is possibly corrupted. The file header checksum does not match the checksum calculated. Tried all posisible boots and no joy, continues to turn it back on! Frustration...

  Hey James,.

  I does no change, I didn't download a document from my email (from a sender of confidence). I tried to start in safe mode, just, it restarts and goes back to the corrupted checksum display... Last known good config was the same result! The only error message is one that is in the title of this post, not others. Another detail, that I forgot to add is that it does not get insofar as a logo windows before it fails, just the toshiba start screen, then either passes the corrupt message checksum or a blue screen and restarts before I can read the text on the blue screen. Thanks for your response! Any additional help would be excellent if you can. In the meantime, I'll try your methods. Thanks again
  OK, I have now managed a Startup Repair trying over and over again. Restore all settings and now looks very good, thanks for your help!

• What is the name of the file where the contacts are stored.

  I need to restore my contacts from a backup. What is the name of the file where the contacts are stored?

  According to the contacts or the premises or in iCloud:

  ~/Library/application support/address book/metadata for local contacts

  ~/Library/application Suport/address book/Sources find the iCloud account and file metadata

  However, if your backup is located in Time Machine, open the contacts application and any asset, enter Time Machine. Go back in time to find contacts. Select them and click on restore.

• What can do XP Pro SP3 OS be upgraded into without loss of programs (though of course, some are not compatible with the new operating system) and user files and info?

  Operating system
  MS Windows XP Professional SP3 32-bit
  CENTRAL PROCESSING UNIT
  Intel Pentium M 740
  Dothan 90nm technology
  RAM
  1.50 GB Single-Channel DDR @ 166 MHz (2, 5-3-3-7)
  Motherboard
  TOSHIBA ECU00 (U1)
  Graphics
  Monitor Plug-and-Play (1280x768@60Hz)
  Mobile Intel (r) 915GM/GMS, 910GML Express Chipset Family
  Hard drives
  97 F TOSHIBA TOSHIBA MK1032GAX (PATA) 43 ° C
  Optical drives
  MATSHITA DVD - RAM UJ-YEARS 840
  VUNSH ZC5QZWX SCSI CdRom Device
  Audio
  Realtek AC97 Audio

  Hello

  Vista is no longer sold by Microsoft.

  Microsoft now sells Windows 7.

  You can't do what you want to do.

  "Upgrading from Windows XP to Windows 7"

  Introduction

  To upgrade your Windows XP computer to Windows 7, you will need to select custom during installation of Windows 7. A custom installation keeps your programs, files or settings. It is sometimes called a 'clean' for this reason installation.

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Here's more information to consider before upgrading;

  Before purchasing Windows 7, follow these steps:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  And the Microsoft Store where you can get an idea of the price of Windows 7:

  http://www.microsoftstore.com/store/msstore/en_US/list/CategoryID.50726100

  See you soon.

• Corrupted MBR. Operating system: unknown (unknown) Local disk.

  Hello, I am trying to find solutions to the difficulty of my corrupted MBR.

  I am running Windows Vista Ultimate 32 bit. I tried to run a startup repair, but I had few results that recovery Options system does not detect my Vista operating system. I tried to load the drivers, but I don't know who or how to load. Instead, I tried startup repair, and I tried a /fixMBR Bootrec.exe, Bootrec.exe /fixBoot in the command prompt.

  By running the Startup Repair, tool diagnosis with what happens:

  Root cause found:

  MBR is corrupted.

  Repair action: repair Diskmetadata

  Result: failed. Error code = 0 x 57

  Time taken = 16 ms

  And running it at the command prompt, is the question that I met:

  A device attached to the system does not work.

  If I could receive advice, it would be greatly appreciated. Thank you.

  Hello

  If you have received when you try bootrec /scanos this means that there is no Windows installation
  found.

  If you tried all those and no help then the drive or the controller has a problem.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Comand operating system to copy files on Unix by ODI

  Hi all
  
  I use 11 ODI and Oracle 11 g.
  I need to copy some files and put them into another folder using the operating system as
  "cp /dean/sc/ready_file_*.dat/dean/sc/lony.
  
  But when I run the OS command in ODI it gives error like
  
  ODI-1226: command of OS step 1 fails after 1 attempt.
  ODI-1242: the operating system command will fail.
  at com.sunopsis.dwg.dbobj.SnpSessTaskSqlS.getExceptionOnStepTaskFailure(SnpSessTaskSqlS.java:49)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatStepTaskError(SnpSessStep.java:1101)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:575)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:464)
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ 2.doAction(StartSessRequestProcessor.java:366)
  at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
  at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$ 0 (StartSessRequestProcessor.java:292)
  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ StartSessTask.doExecute (StartSessRequestProcessor.java:855)
  at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
  to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:82)
  at java.lang.Thread.run(Thread.java:736)
  
  Please suggest any entries.
  
  
  Thank you
  Lony

  Hi lony,.

  If you want to copy, and then you have to use oditools which is OdiFileCopy.

  If you want to use scriptfile can the script file updated the directory accessible to ODI. Then use the codes below in your oscommand or odioscommand.

  /Home/lony/scrpt.sh

  Sometimes you may need to use the environment variable (depending on the needs. ex: If odi can you can reach all the child directory in/home/lony but not in/home/test.).

  Thank you.

  Published by: Stéphane 21 August 2012 16:36

• On the file is to start and stop the weblogic server10.3

  I use the windows 2003 operating system.
  I installed the WLS 10.3.
  can someone help me how to write the file beats for the start-up and the slaughter of the instance.so of the weblogic server that it willl run as basic service.
  I'm new on this. Please suggest me
  
  Any help is appreciated.
  
  Thank you
  Sanchez.

  I thought I remembered having this option in the Configuration Wizard, but I'm not now.

  Read the details of WebLogic as a Windows Service configuration to [http://e-docs.bea.com/wls/docs103/server_start/winservice.html]

• B2B generate the file with the file extension will start

  Hi guru B2B.

  We have a problem with the name of the output file. We have customized the java class to change the file name out based on operational needs. It works well, but recently, we see the file with the extension name from "start" are generated with size '0 '. The right files always generated with the appropriate content.

  Can someone tell us what is causing this problem?

  Thank you in advance,

  NAFTA Li

  Hi Alena

  I assume you are using a B2B channel tuned to retrieve messages in a folder. Please check if this channel to listen is to have the parameter enable selected marker.

  Disabling the marker Enable should avoid generating the file start in the folder.

  Thank you

  Arun

• Windows operating system asks "EBlib.dll" - where can I find?

  I'm looking for the "EBlib.dll" because I formatted and reinstalled my operations systems and its readers.

  After that I turned on my computer its all demand this dll, but I can't find anywhere!

  So I'll apreciate any help with this dll.

  Tanks a lot!

  MALES? A¡Rio

  Hello

  I googled a bit and found one detail concerning this file.
  This file belongs to the library of dynamic links EBLib designed by COMPAL ELECTRONIC INC.

  I doubt that you download this file, but I think you should check if you have installed all the drivers and tools correctly!

  Also I recommend that you check the processes in the msconfig Startup tab.
  If there is something called EBLib and then uncheck the brand and restart the laptop again.

• Windows 8 operating system, BTTray.exe was able to start, BtBalloon.dll is not found

  I have a Windows 8 operating system. Whenever I start my PC, I get this error message. BTTray.exe was able to start because BtBalloon.dll is not found, reinstalling the application may fix this problem. I do not even begin to know what is BtBalloon.dll, where can I find it and how do I reinstall. I tried to recover deleted files and reinstal them but there was no improvement. I also tried to do a restore to an earlier date, but she refused.

  Help, please.

  Reinstall your Broadcom Bluetooth drivers.

• VMFS5 data store shows several errors, which suggests the corruption of the file system?

  VMFS5 data store shows several errors, which suggests corruption of system files.

  the tool allows to check the VMFS file system

  vSphere disk Metadata Analyzer (LOVE)

• "80070002" error the system cannot find the file specified with start.vbs

  Original title: Windows Script Host

  Script: C:\Program Files\PCDApp\start.vbs

  Line: 2

  Char: 1

  Error: The system cannot find the specified file.

  Code: 80070002

  Source: (null)

  1 first, update your AV program and run a full scan. Then download, install, update and run a full scan with malwarebytes(free). This will help you establish that his little likely to be malware related, or not.

  If each scan find and remove whatever it is, does the problem persists after that scans have completed?

  2 if so, try a clean boot. If the problem does not occur in 'clean boot' then follow the section "How to determine what is causing the problem by performing a clean boot" in an attempt to establish that generated the message.

  Do not leave your PC like the clean boot and return to a normal startup after your investigations.

  3. If the boot doesn't help, take a look at autoruns to see if that can locate which is turned on and generates the message.

• corruption of the file of the report, CPIO, cksum tips

  I try to install OID as per
  http://www.Oracle.com/technology/pub/articles/Chan-OID.html
  I downloaded the binaries, but this error and unable to find the value of chsum on this binary, need help to solve this problem
  
  
  $ cpio - idmv < as_aix_oim_oif_101401_disk1.cpio
  cpio: 0511-903 out of phase!
  cpio attempting to continue...
  cpio: 0511-904 jump 59366 bytes to get back in line!
  Lost one or more files and the previous file is possibly corrupt.
  cpio: 0511-027 the length of file name does not match the expected value.
  
  as_aix_oim_oif_101401_disk1.cpio cksum $
  2077435645 709388800 as_aix_oim_oif_101401_disk1.cpio

  Try this:

  cpio - idcmv<>