Corruption VCDB

does anyone know of any tool that can detect and repair any corruption VCDB?

I had a problem of migration of our VCDB of SQL Express 2005 to SQL 2005 and vice versa. Which was caused by major dramas related to the attempt of VCA activation on a cluster where SQL server has been virtualized as all VMS should be turned off. If the VM SQL was off then the required config could not be changed

Anyway, the short history of the database is screwed, everything seemed to be ok for the last 2 weeks, but recent performance statistics are not connected and I just noticed later that I can't deploy any virtual machines from a template. When I try to deploy a model, VC blocks leaving this error in the windows event logs:

Event type: error

Event source: VMware VirtualCenter Server

Event category: no

Event ID: 1000

Date: 19/11/2008

Time: 13:38:14

User: n/a

Computer: XXXXX

Description:

The description for event ID (1000) in Source (VMware VirtualCenter Server) cannot be found. The local computer may not have the information necessary registry or message DLL files to display messages from a remote computer. You may be able to use the option/auxsource = flag to retrieve this description; For more information, see Help and Support. The following information is part of the event: an unrecoverable problem has occurred, stopping the service of VMware VirtualCenter.  Check the connectivity of database before restarting. Error: error [VdbODBCError]-(1) "ODBC error: (23000) - [SQL Native Client] [SQL Server] cannot insert the value NULL in the column 'PENDING_ANNOT_SET_FLG', table 'VIM_VCDB.dbo.VPX_VM '; column does not allow NULL values. INSERT fails. "is returned when you run the SQL statement" INSERT INTO VPX_VM (ID, DATACENTER_ID, HOST_ID, RESOURCE_GROUP_ID, POWER_STATE, DISABLED_SNAPSHOT, FAILED_DMOTION, IS_TEMPLATE, AGENT_ID, AGENT_CNX_STATE, FILE_NAME, LOCAL_FILE_NAME) VALUES (?,?,?,?,?,?,?,?,?,?,?,?) ". ».

Anyone have any ideas?

Edit: should probably mention I'm under VC2.5 U3

Can I reinstall VC and re - add all nodes of a cluster without affecting any running virtual machine?

I don't have a problem when I upgraded from 2.5 U2 to U3 2.5 VC VC.

In this environment, I have the Kit Accelleration of medium-sized, and I 3 guests to a unique cluster, given the number of licenses.

The guy who did the initial installation is not a guy from VMware (there is only a padawan), so it hurts things a bit on the side of the database...  So I whacked the installation while all hosts/guests were running.

I hope you have the same success.

Jase McCarty

http://www.jasemccarty.com

Co-author of VMware ESX Essentials in the virtual data center

(ISBN:1420070274) Auerbach

Tags: VMware

Similar Questions

  • I downloaded Sierra.  Installation failed saying corrupted download.  App Store still says downloaded, but there is no button install and I can't download it again.

    I downloaded Sierra.  Installation failed saying corrupted download.  App Store still says downloaded, but there is no button install and I can't download it again.

    What should I do?

    Hello volvoxc70,

    I understand that you have downloaded macOS Sierra, but are not able to install it, because you are told that the download was corrupted. In a situation like this, the next step would be to remove existing installation application download and re - download.

    Applications downloaded from the App Store: click on the Launchpad icon in the Dock, hold the application icon until all the icons begin to jiggle, then click on the button to remove the application. If you later want the app, you can reinstall it on the App Store.

    OS X El Capitan: install, update and uninstall applications
    https://support.Apple.com/kb/PH21867

    If you do not have Launchpad on your Dock, you can access your Applications folder in the Finder menu reach > Applications. Once in the application, find install it macOS Sierra app, click once to select it, open the file menu > move to the trash. You will need to enter your administrator password to perform this operation.

    See you soon!

  • First aid found corruption that needs to be repaired.

    "First aid found corruption that needs to be repaired. To repair the boot volume, run first aid of recovery ".

    I installed Sierra but first aid called the El Capitan 10.11.3 volume.

    Where is the recovery?

    your really

    Baffled

    If you are in recovery mode access disk utility from the drop down

    On OS X Recovery - Apple Support

    then fix the volume

    https://support.Apple.com/kb/PH22243?locale=en_US

    otherwise if you are on OS X utility can be found in

    Macintosh HD/applications/utilities/disk utility

  • Notes is corrupt

    Hello!

    My friend is using the mac book air El capitan 10.11.6 (updated), it has some difficulties in the application notes and tried a few steps to solve the problem, but without success.

    I tried safe mode - no results, but he has a lot of data and does not create a new user account.

    He is looking for a method.

    Help, please!

    Thank you!

    Create a new user account not to LOSE data - it helps to know if there is something dark and deep "about" of things in the user in general that CAN be placed at the heart of the problem.

    A more complete history of what exactly happens (which means 'corrupted' to you all?) and details of the measures taken (each action-'how' was tried Safe Mode? for example, are there ' All SURE this Safe Mode has been completed?)

  • Remove corrupt index '$I30' file 0 x 5 (.). ???

    Hello I can't a lire participation from my hard drive with this message delete corrupt index '$I30' file 0 x 5 (.). ???

    Is it using first aid/repair utility disk or chkdsk for the Bootcamp NTFS partition?

  • Download was corrupted to El Capitan

    I downloaded El Capitan and it says that the file has been corrupted after performing a bootable USB to install on a new SSD. I tried several times re - download and am trying to setup the 4th attempt! I get the same error every time. Any ideas?

    Thanks in advance!

    I had the same problem. For me, he tried to install the public beta (sometimes called candidate GM) and when I disconnected from the App Store, reconnected and downloaded one called OS X El Capitan, everything went well.

  • Corrupt Digital Raw compatibility update

    I have my macbook set to do automatic updates. I see a light red on the App Store, which shows an updated - and when I check it said provision, "Digital Raw Compatibility Update, version 6.20. I scroll down and see that it has installed this update even at least 10 times start on 13 August through 24 August! Even updated, same version and I think it's a corrupted file or virus! Help, I want to stop saying that I need to update!

    Hello cdaniels31.

    Thank you for using communities Support from Apple. I understand that the Digital Raw compatibility update, version 6.20 performed several times, but the App Store there is always a full update. I am pleased to provide you with advice for this problem.

    First of all, let me put your mind at ease. It is an updated official Apple for the compatibility of the RAW for OS X El Capitan image, not a virus. It seems that OS X is not recognizing that it was already done.

    Let's start troubleshooting by restarting your MacBook. Then we will try to complete the update by using the link below, instead of using the App Store.

    Digital Raw Compatibility Update, version 6.20

    Finally, restart your MacBook, once more.

    Kind regards.

  • Google Reader app corrupt Finder

    I was wondering if anyone else has found that the Google Drive App works on OS X 10.9.5 the OS X Finder works only in thumbnail view.  The Google Drive App worked fine for several months until now, but suddenly it has started to interfere with the Finder.  I removed the app and all is well.  I tried to download and reinstall the software and the problem came back so I had to withdraw again.

    Maybe corrupt Finder preferences.

    Open the Finder. In the Finder menu bar, click go > go to folder

    Then type or copy paste the following text:

    ~/Library/preferences/com. Apple.Finder.plist

    Click OK, and then place the com.apple.finder.plist file in the trash.

    Restart your Mac, then see if the problem persists.

  • 10.9 corruption of finder issue

    Hello

    I have something corrupted in my Finder settings. It is better understood by watching this video:

    https://www.dropbox.com/s/ed86hrttjt0xzey/Finder%20behaviour%20smaller.m4v?DL=0

    A new window appears without any content, then move this window made all kinds of weird stuff in the window instead of files. All other applications are fine, save/open boxes are fine.

    I have: has crushed the finder, removed preferences, restarted, all to nothing does not. I know it must be something corrupt in my library, somewhere, as the finder behaves itself in other usernames. I really wanted to do an archive and install in case where that just keep all the problem, and I don't trust a clean installation for a relatively small issue.

    Obviously, I need to replace or remove something, but I don't know what. Does anyone know what I need to do please?

    Thanks in advance.

    This looks more like a graphical corruption problem, to my eyes.

    Could be a problem of chip (GPU) graphics.

    The internal heat of the iMac can cause all sorts of problems of component and failure over a period of time.

    You doing anything to compensate for the heat inside your iMac?

    As a control software fan to speed up the internal fans?

    Or run a small desk fan behind the iMac to reduce the internal temperature of the iMac?

    This could help to alleviate this problem, if the GPU has not, again, was permanently damaged.

    Good luck!

  • last update of iPad 2 Air corrupt (9.3.4)

    It's the most recent * - upward by Apple - every time (5 attempts) trying to update the software on my Air 2 to 9.3.4 iPad I get a message (error = 1403) indicating the update had been corrupted during the download - after nearly 20 minutes of time to download on a 30mps connection. I cant do anything, it seems, to get a non corrupted version!

    Bye bye Apple - you finally convinced me that you are completely useless.

    You can try to apply the incremental update to settings > software update.

  • DfVuBrowserPlugin.exe will not run on 64-bit v.41. reports restaur頳era file corrupted - it works on old Xp

    I used LizardTech DjVuBrowserPlugin50.exe on my old XP PC and recently tested on a laptop.
    My new PC has 64-bit Firefox 41 and using 'install module file' produces a message saying
    "This add-on has not been not installed because she seems to be corrupted.

    The answer is to put npdjvu.dll in the Mozilla Firefox plugins directory, then turn it back on. Open the menu (the right hand of the menu bar icon), and then select Add-ons. Scroll to Viewer DjVu Plugin and change the "Application activation" status to "always enable".
    Have had no problems since, while I installed LizardTech Djvu Solo and DjVu Control, which contains DjVuViewer.exe

  • Is it possible to recover the logins.json.corrupt?

    Yesterday, I lost all my passwords after a bizarre episode (see https://support.mozilla.org/en-US/questions/1085073 and https://support.mozilla.org/en-US/questions/1085300 ). I have a file logins.json in the folder of my profile with any passwords, I was able to rebuild, and in the same folder is logins.json.corrupt (27K, 24740 characters according to the Texpad, but none of them visible - blank page). This response (https://support.mozilla.org/en-US/questions/1054932 ) - reset signon.importedFromSqlite, close FF, delete logins.json and re - open - did not work. But I have re-set 'value (user)' in signon.importedFromSqlite - maybe I should reset 'value '?

    Just checked - reset the value did not help either.

    COR - el said

    You can check if there are previous versions of the files logins.json and key3db.

    • Right click: properties > Previous Versions

    There is no way of knowing if you have a correct signons3.txt file.
    If it works, then you see the names in the password manager.
    Otherwise, you will see an error message or a blank password Manager window.

    Yes! Thank you 1 million. Get all of my passwords.

    For those who have found this answer: I opened my profiles, right-click on logins.json file, having consulted the "Previous Versions" property page He produced a list of three. In the list, right click on one of the last week, the option is useful that was 'copy '. Copied and pasted on the desktop, where logins.json recovered appeared. Then copied logins.json current profiles Safe Placez_ the (fair value), and then deleted the Profiles folder and replaced with the recovered version.

  • Update NVIDIA & received the message that current browser (FF) was corrupt & gave me the opportunity to make the browser by default IE & Google as search engine - what happens?

    Updating NVIDIA, I received a message that my browser (Firefox) was corrupt and that I had to do my default browser Internet Explorer with Google as a search engine. I had many major problems with software advertising, viruses etc since I updated FF 2 days. Firefox was hacked? I reported these problems and give all the details in the last days, you can find them if check you email from this account (Stephenwolf) or +. +++ @hotmail.com. Go now will contact again later today.

    public email Edition and robots to spammers. You should get an email when there are answers.

    I hope that your update was not one of those sites that run misleading ads on the search engines for packages of shit... but it sounds really like your Firefox is not clean yet. Here's my method to track down and clean the bad Add - ons and other hijackers. I know it seems long, but it's not so bad.

    (1) open the Control Panel, uninstall a program. After the loading of the list, click on the column heading "installed on" to group infections, I mean additions by date. This can help the undisclosed items bundle smoker who snuck out with some software, you have agreed to install. Beware of everything that you don't recognize / remember, since malware often uses sounding names important or innocent to discourage you remove. Out as much garbage as possible here.

    (2) open Firefox page modules using either:

    • CTRL + SHIFT + a
    • "3-bar" menu button (or tools) > Add-ons
    • in the Windows "Run" dialog box, type or paste
      firefox.exe "about:addons"

    In the left column, click on Plugins. Set essential and unrecognized plugins 'never enable '.

    In the left column, click Extensions. Then, in case of doubt, disable (or delete, if possible) not recognized and unwanted extensions. Remember that all extensions are optional, none come with Firefox.

    Often, a link will appear above at least an extension disabled to restart Firefox. You can complete your work on the tab and click one of the links in the last step.

    Any improvement?

    (3) you can search the rest of problems with scanning/cleaning tools listed in our technical support article: Troubleshooting Firefox problems caused by malware. These scanners on request are free and take a long time to run. If they end quickly, especially if they require the payment you have a serious infection. I suggest the specialty forums listed in the article in this case.

    Success?

    Then we can work on the restoration of your normal settings.

  • Updating Firefox, my old profile said places.sqlite.corrupt and I can't get bookmarks

    Firefox crashed while and refreshed himself. He created a "old firefox data" folder on my desktop. I thought I followed the instructions correctly, I deleted the profile information in my new program firefox (appdata). and I copied pasted old data from firefox (desktop folder) into its place.
    When I restarted firefox, it has reopened all of my tabs that were open in the crash initially. So I thought everything was great. Then I noticed that my favorites are missing, and the tool bar was empty. My history file is also empty. When I looked at my profile, I found that I places.sqlite.corrupt file.
    I found a site that talks about downloading a program to fix places.sqlite, but I'm not a programmer and I don't understand how to do it. I don't want to make things worse, so I'm leaving it alone.

    It is possible that the places.sqlite has been corrupted by the accident and may not be used.
    You would have to restore a backup of the folder bookmarkbackups on the desktop.
    In this way, you can restore the bookmarks, but will lose the history (there is no backup history).

    You can check for problems with the database places.sqlite file in the Firefox profile folder.

  • Corrupt junk folder

    It's happened several times, but I've never managed to get this properly resolved. I hope that it is a problem that can be fixed in a next version of Thunderbird.

    My junk mail is set so that junk e-mail for all my accounts (a dozen) is sent to a single junk folder in local folders. It of like that for 5 years and its working fine, but last week, although that emails are marked as spam, they stay in their Inbox folders.

    The junk e-mail folder is showing a few messages, but it is 3.5 mb in size. If I fix it (right click, properties, repair, etc.) a series of messages appear in the folder, all not marked as junk. I can remove compact all, folder, but it still shows as 3, 5 MB. If I fix it again, these messages return.

    It's a real pain having to manually delete these messages, and click on them in the inboxes, there is a chance that I can invoke a virus as well.

    Is there a way to correct the junk e-mail folder, other than restart the pc (to stop the folder used) and delete it?

    Any ideas what could be the cause of this occur and reproduce?

    next time (and there will be probably) save a copy of the cause of the junk e-mail folder, if it's that small I get you email it to me so I can have a look at what corruption is exactly. My hope. Identify a cause the traces in corruption.

Maybe you are looking for