Could not access the Windows Installer service

Similar Questions

• "WindowsUpdate_80070641" "WindowsUpdate_dt000"_"WindowsUpdate_00000641" "WindowsUpdate_dt000" __Windows could not start the Windows Installer service on computer local error 216:0xd8

  I have a 64 bit Windows 7 PC and cannot install updates.  Here are two screenshots.

  One contains two error message that I get when trying to update

  "WindowsUpdate_80070641" "WindowsUpdate_dt000"
  "WindowsUpdate_00000641" "WindowsUpdate_dt000"

  The second erorr is what I get when you try to start the Windows Installer Service.

  Windows cannot start the Windows Installer service on computer local error 216:0xd8

  I follow several steps that are listed in the web pages of solving problems.  Tried to make own reboots, use the Microsoft Fix and it does not detect any problems.  I tried to install Windows Installer 4.5 and I get a message telling me that this update is not applicable to your computer

  Please notify

  See if this ad helps-

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/213770d0-e94b-43B4-9ff6-99e6366b556b

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• When you try to install anything I get an error: 'could access the Windows Installer service '.

  Original title:

  Windows Installer.

  When I try to install anything I get the following message: "service Windows Installer could not be accessed.   Windows can run in safe mode or Windows install not installed correctly.  I'm not running in safe mode.  This problem started in the last day or two and there have not been any changes to my computer.  I'm under Winsows XP Professional, 32-bit, service pack 3.  Could you help me solve this problem?  Thank you.

  Hello
   
  You can try the steps from the following link and check if it works:
  ""The Windows Installer Service could not be accessed "error message when you install a program in Windows XP "
  http://support.Microsoft.com/kb/315353
  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows
   
  Let us know if it helps!

• "Could access the Windows Installer Service" when you try to install codecs

  The Windows Installer

  When I try to run the codecs of corel, the following alert appears:

  The Windows Installer Service could not be accessed. This can happen if yor are running windows in safe mode, or if the installer of the window is not installed correctly. Contac your support staff, assistance.

  Can someone help me out here. I'm still trying to run a dvd on my WMP movie, but no codec plug-ins introduce yourself. Prior to that, I get another warning:

  Windows medal drive has not been closed properly. A damaged or incompatible plug-in could have caused the problem to occur.

  As a precaution, the plug-ins optional have been disabled.

  Hello

  I suggest you to follow the steps in this article and check if it helps:

  http://support.Microsoft.com/kb/315346

  It will be useful.

• How to fix "could access the Windows Installer service"

  Hello

  I am trying to install an application and I still get the message

  "Installation ' VISA Shared 64-bit components ' failed with the following error: ERROR 1719." The Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed correctly"

  I trieds methods 1, 2 and 4 (I use Windows 7, which is not listed for method 3) on this link http://support.microsoft.com/kb/2438651#reso1 and the problem persists.

  Can suggest additional measures I can take to resolve this please?

  Follow these steps:

  Accessories/RUN

  Type: regedit

  Navigate the menu by clicking on each of the following:

  HKEY_LOCAL_MACHINE

  SYSTEM

  CURRENTCONTROLSET

  SERVICES

  MSIServer

  Right-click on WOW64 and select 'change '.

  Change the value data from 1 to 0

  then close this box of

  Access the dialog box run again (as we started with above)

  Type: services.msc

  Access Windows install and STOP the service and RESTART.

  Then restart your machine.

  I hope this works

• "Error 1719. Able to access the Windows Installer Service"when you install programs.

  After spending the last week every night trying to get some software installed (and of course the search for remedies in probably all available forums), I let go and post this request for assistance. But first my story:

  I have lived the last week suddenly my Neat Receipts software does not recognize my scanner more. Trying to reinstall the software, I came across the error that Windows Installer could not be started. That's when I started first for solutions. I was surprised how many solutions I found (but more redoubled practically the same thing), but none did it for me. At this point, I was always under the assumption that it is a problem of the Neat Receipts software.

  Then after another night of frustration I could not pass my trial version Office 2010 plus a sort of license error. I was a little surprised that the trial version which abruptly ended without giving me the opportunity to enter a license key (I got wrong), but doesn't bother too much because I liked the product and had noticed last week as well as Office 2010 is already officially released and I decided to buy it. After spending about $300 and a successful upload, I tried to install it.

  And here my saga continues. First I got the message that I couldn't upgrade my trial version and need to uninstall. Uninstall with the uninstaller routine does not work (windows error message install), but I could uninstall it using the Windows-Install-Clean-Up utility. Now, I can start the installation process, but after being nearly halfway through the installation, I again get the error of Windows install the Windows Installer Service cannot be accessed (Error 1719). It is roughly the same error that I got at the beginning, when I tried to reinstall the software, Neat receipts. So, it seems not to be a misapplication of Neat receipts or Office 2010, but a windows problem.

  The frustrating thing however is that after spending all hours searching online for solutions, the only thing I've discovered is that I am in good company (i.e. There are many others have reported the same problem), but none of the solutions work. Just to be safe, do not for get the same Advisor I tried already several times, let me enumerate what I've done so far:

  1. I am logged on as administrator

  2 - I started the Windows Installer service

  3 - I ran SCF /sannow (no problems found)

  4. I not saved and re-entered the msiecec with / opt and/regserver. I did so explicitly for BOTH (!) msiexec programs, one in the system32 folder and the one in the sysWOW64 folder

  5. I tried to repair Windows 7 boot from the windows 7 installation DVD and run the option repair (no problem found)

  6. I tried to pass the parameter registry WOW64 (for MSIServer) from 1 to 0 (I found this in one of the suggested solutions) [and later again back to the original value 1]

  7. I tried to 'force' windows to ignore the msiexec for 64 bit (in the system32 folder) by renaming and by identifying the msiexec for 32 bit 9 in the sysWOW64 folder) and update the path regsever C:\Windows\system32\msiexec.exe \V to C:\Windows\syswow64\msiexec.exe \V

  8 - I disabled my firewall and antivirus

  9 - I did everything above in many variations with reset (both the save option - reboot)

  -in fact, I could do things more I can't remember.

  Unfortunately a recovery is not an option most, because I guess I tried too many things and my view of the possible return is a point in which my computer was already in place...

  I tried to involve as well a representative of Microsoft support explaining my dilemma, but only made e-mail a generic response on this same forum (great customer service!).

  While I was actually pretty happy in the last 4 months with my new Windows7 (and thus Office2010), I am now reaching the point where I fell like throwing finally the towel and kiss goodbye to Microsoft. I was seriously considering to move to Apple before decide me in February favor some cheaper hardware to continue with Microsoft and the new Windows7. But this experience not being able to fix my computer after spending nights in the search for solutions and not be able to get support from Microsoft disgusts me.

  Now I wonder if there is someone out there who could help me out here...

  Of course, the .msi applies only to installers .msi, which was my mistake for which I apologize.  Regarding a clean installation, the fact remains that you have faced this anomaly for several days, a clean install, despite the pain, would be a distant memory now.  This is my personal opinion, not Microsoft, they me disavowed a long time ago, in all cases MVPS have nothing to do with Microsoft, although the price is published by Microsoft, it is awarded for the caregiver, or in this case try to help others.  It is good that I can at least allow you to vent, it's better out there that maintenus kept bottled upward, no matter how hard it seems to fix the problem, it will be resolved in your favor by subsequently, one way or the other.

  In pursuing the side of permissions of things you can try that if you wish.

  This example may or may not work for you, with your program?

  "It seems that the"Run as Administrator"command gives you administrative privileges only, and they are not enough to install Java (and OpenOffice, by association). To work around this problem, you must actually connect to an administrator. Open a command prompt with admin rights by clicking Start, type cmd in the search/run box, hit CTRL-SHIFT-ENTER. At the prompt, type:

  NET user administrator / Active: Yes

  Then disconnect from your regular account and record as an administrator, you should be able to install the program. When you are finished, open a session to your regular account and, for security reasons, disabling the account administrator for assistance:

  «net user administrator / active: No.»

  http://user.Services.OpenOffice.org/en/forum/viewtopic.php?f=15&t=11706#p55879

  See if this program you can tell what is happening with the failure of the Office to install.

  Process Monitor v2.8
  http://TechNet.Microsoft.com/en-AU/Sysinternals/bb896645.aspx

  Process monitor Forum
  http://Forum.sysinternals.com/forum_topics.asp?FID=19

  Need tutorial for Process Monitor
  http://Forum.sysinternals.com/forum_posts.asp?tid=13724

  If it was purchased through the Office Online web store?

  If so, you may need to return to this site at http://office.microsoft.com/en-us/products/ click on the link buy Microsoft Office 2010 today.   Then click on the buy now button to your product...  When you arrive on the "Items in your shopping cart" page, look for the link to the FAQ at the top of the page.  Click on FAQ.  When it opens do scroll to 'Customer Service '.

  Customer support

  What is your refund policy?

  Microsoft products purchased through the Office Online web store are eligible for return within 30 days of the purchase date. Taxes paid will be refunded on eligible returns.
  Among the exceptions to this return policy: Microsoft backup CD/DVD are not refundable and are not included in our 30 day guarantee.

  How can I request a refund?

  To obtain a refund for digital product please click here {web page link} to access your order history information. Click the Order Details of the order for which you want to request a refund. Use the option «back»

  When will be the reimbursement of the credit?

  Your refund credit will appear on your credit card within five to seven working days after we receive your letter filled with destruction. If a different payment method has been used, the duration can vary.

• A small flag appears on the bottom of my screen that says activate security service Windows, but when I try to turn on it says could not start the Windows security service

  Original title: HELPPPPP

  My computer a little flag in the background with a x... said red it turn security service windows, but when I try to turn it on... it said windows security service cannot be started :/

  Hey ChelseaHarris,

  Take a look at two responses in the thread below the link to see if they allow the Windows launch security service:
  Could not start the Windows Security Center service.

  If these steps do not help, try to run a full scan using the Scanner from Microsoft which can be downloaded using the link below:
  Microsoft safety scanner

  Hope that helps.

• DIM-00014: could not open the Windows NT Service Control Manager.

  Hello
  11 g R2, on Win 2008 I created the user oracle of the United Nations. It is in ora_dba and local Administrators group but cannot create oracle instance:

  C:\Users\oracle>oradim -edit -sid TEST -startmode auto -srvcstart system
  DIM-00077: Failed to change service configuration.
  O/S-Error: (OS 5) Access is denied.
  
  C:\Users\oracle>oradim -new -sid TEST -startmode auto -srvcstart system
  DIM-00014: Cannot open the Windows NT Service Control Manager.
  O/S-Error: (OS 5) Access is denied.
  
  C:\Users\oracle>oradim -new -sid TEST -startmode auto
  DIM-00014: Cannot open the Windows NT Service Control Manager.
  O/S-Error: (OS 5) Access is denied.

  Thanks for the help.

  Start the command with administrator privileges prompt

• "Could access the Windows Installer Service" error when installing or uninstalling anything.

  Don't know which forum deals with this. Whenever I try to install anything, such as Quicktime or ITunes, I get this message. Also when I tried to uninstall ITunes, I got the same message.

  What is a 64-bit or 32-bit (x 86) version of Vista?

  See if there's more information if logging is enabled?

  For troubleshooting, turn on the MsiInstaller verbose log file by following the instructions in the article KB Q223300.
  223300 - how to enable Windows Installer logging
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;223300&FR=1&PA=1&SD=HSCH

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212/#appliesTo

  You can try to reset the permissions of security to their default values.

  How to reset security settings to default values
  http://support.Microsoft.com/kb/313222#appliesTo

• Error - windows search on the local computer started and then stopped. Could not start the Windows Search service.

  Original title: windows search service does not start.

  When I try to start the service "windows search" I get the following error "windows search on local computer started and then stopped. Some services stop automatically if they have no work to do, for example, the services of newspapers and performance alerts' I tried manually and nothing, can someone help me please.
  It is a XP machine and yes I have windows search 4.0. I need help to get that windows search service has restarted.

  I no longer need it, I just backed up all my files and re - install windows XP.

• Could not load the Windows wireless service

  When finished the windows startup, it cannot load the service windows wireless. Then I run repair and solve the problem until I turn off the phone or appears the same problem and so on...

  Hi Gustavo,

  Are a. When you facing this problem?

  B. you get errors?

  C. you are able to connect using the wired connection?

  Try the suggestions in the article below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  If the problem persists, you will need to uninstall the network driver and restart the computer for the generic drivers loaded on the computer.

  1. click on Start

  2 type devmgmt.msc in the start search box and press on enter.

  3. right click on the network driver and choose Uninstall.

  4 restart the computer and check the status.

  Previous post: the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Try to install solidworks 2011 on my laptop and it always gives me an error message: internal error. Have not run the Windows Installer service for this product as expected element: InstallExecut

  Error installing program on Windows 7 64 b

  Hello everyone, im trying to install solidworks 2011 on my laptop and it still gives me an error message saying "error interno. Without to ejecuto el servicio Windows Installer para este producto componente como is esperaba: InstallExecut "(sorry for the Spaniards, that solidworks is in Spanish). What can I do to fix this? I searched a lot of google to fix it but I couldn't yet. Thank you!

  my laptop has windows7 64B

  Troubleshoot Windows install

  2438651 how to solve problems that may occur when you install, uninstall, or upgrade a program on a Windows computer

  http://support.Microsoft.com/kb/2438651

  Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:

  1. in the menu 'Start', click on ' execute:.»

  2. in the "Open" box, type "msiexec /unreg", and then press ENTER.

  3. in the menu 'Start', click 'run '.

  4. in the "Open" box, type "msiexec/regserver", and then press ENTER.

  --------------------

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

  Also:

  Check your hard drive for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  -------------------

  See the developers website for compatibility with Windows 7 and if there are updates, corrections or difficulties that might ensure compatibility.

  Windows 7 Compatibility Center

  Check if your application software or hardware is on the list

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

• Could not start the Windows Firewall service, missing dependency services

  Hello Dustin,.

  I suggest the steps after booting in safe mode and make sure you copy the entire command from "Windows Registry Editor Version 5.00".

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  Please come back after you have tried the above suggestions.

  Hi, well I thank you that I was finally able to get my BFE run on my computer.  Now, I will try to get my firewall up.

  Thank you once again the copy and paste work.

• Indexing Windows problem could not start the Windows Search service on Local computer

  Separated from this thread.

  Follow these steps, received this response:

  

  where now?

  Please run a check of system files (SFC) 

  
  

  All instructions are in our Wiki article below...
  If you have any questions please ask us for .

  Check the file system (CFS) Scan and repair system files

• Could not start the Windows Vista firewall

  Hi all

  I can't start the Windows Firewall service in anyway.
  I can't open it via Control Panel, as it is said simply: "the Windows Firewall settings cannot poster because the asscioated service is not running. You want to start the Windows Firewall service? »
  I click "Yes", then he said: 'Windows cannot start the Windows Firewall service. There is no error code indicated.
  I tried running "wf.msc" using the Microsoft Management Console. When this window appears, he says: "there was an error opening the Windows Firewall with advanced snap-in security.; The Windows Firewall with Advanced Security snap could not load. Restart the Windows Firewall service on the computer that you are managing. "Error code: 0x6D9.
  As it seems, I can not start it this way or the other.
  I pressed Ctrl + Alt + Delete and click on the Services tab, then click services on the bottom, and this opens the Services window.
  In the new Services window, I try to start the service "Windows Firewall". I get a message saying: "Windows could not start the Windows Firewall service on the Local computer.; Error 1068: the dependency service or group could start. »
  Therefore, it does not. The service is set to automatic.
  I found another process called 'Base filtering engine', which I discovered is related to the use of the Windows Firewall service. Then, that I try to start this service, and he said: "Windows has no start the engine service of filtering based on Local computer." Error 0 x 80320009: an object with this GUID or LUID already exists. »
  Still, I can't find a way to fix the problem. In addition, the service is set to automatic.
  So if someone could help me, give me ideas or tell me how to solve the problem, it would be greatly appreciated. Thanks in advance.
  P. S. sometimes, when I type things in the command prompt, I get a message saying that "the requested operation requires a rise." What it means
  ?
  EDIT:
  The base filtering engine
  IKE and AuthIPsec Keying Modules

  Internet Connection Sharing (ICS)

  IPsec policy agent

  Routing and remote access

  Windows event collector

  Windows Firewall

  All of these services don't work, with each saying "Windows did not start the * service * service on Local computer.; Error 1068: The dependency service or group could start. ", with the exception of the Base Filtering Engine service.

  EDIT:

  I believe that the motor of filter of Bae is the root cause of the problem, because when I try to start it, it says "Windows cannot start the engine service of filtering based on Local computer. Error 0 x 80320009: an object with this GUID or LUID already exists. ", so that all the other programs on this service, said depedent" Windows did not start the * service * service on Local computer. " ; Error 1068: The dependency service or group could start. ».

  EDIT:

  Hello everyone, I solved the problem. The problem is a corrupted, file called "secdrv.sys. To resolve this problem, I had to first download the file "secdrv.sys' out of my operating system CD. To do this, you must create a partition and "mount" a file on CD, on the newly created partition. The file you have to climb is and is called: "*: \sources\install.wim. Extending .wim means a "file system Windows Image" and to see what files it contains, you will need to download what we call the "Windows Automated Installation Kit". Explicit instructions on the installation procedure and where to get this program, is here: "http://www.vistax64.com/tutorials/86959-access-vista-install-dvd-files.html". Once you have the file mounted, just search the area mounted for "secdrv.sys", then copy and paste it in "C:\Windows\System32\drivers" or that where the drivers from your system. After that, restart and the BFE service and all of its dependencies should work properly. Thanks for the good help like SpiritX.

  Hello everyone, I solved the problem. The problem is a corrupted, file called "secdrv.sys. To resolve this problem, I had to first download the file "secdrv.sys' out of my operating system CD. To do this, you must create a partition and "mount" a file on CD, on the newly created partition. The file you have to climb is and is called: "*: \sources\install.wim. Extending .wim means a "file system Windows Image" and to see what files it contains, you will need to download what we call the "Windows Automated Installation Kit". Explicit instructions on the installation procedure and where to get this program, is here: "http://www.vistax64.com/tutorials/86959-access-vista-install-dvd-files.html". Once you have the file mounted, just search the area mounted for "secdrv.sys", then copy and paste it in "C:\Windows\System32\drivers" or that where the drivers from your system. After that, restart and the BFE service and all of its dependencies should work properly. Thanks for the good help like SpiritX.